Selective CO2 Electroreduction to Ethylene and Multicarbon Alcohols via Electrolyte‐Driven Nanostructuring

Production of multicarbon products (C₂₊) from CO₂ electroreduction reaction (CO₂RR) is highly desirable for storing renewable energy and reducing carbon emission. The electrochemical synthesis of CO₂RR catalysts that are highly selective for C₂₊ products via electrolyte‐driven nanostructuring is presented. Nanostructured Cu catalysts synthesized in the presence of specific anions selectively convert CO₂ into ethylene and multicarbon alcohols in aqueous 0.1 m KHCO₃ solution, with the iodine‐modified catalyst displaying the highest Faradaic efficiency of 80 % and a partial geometric current density of ca. 31.2 mA cm^?2 for C₂₊ products at ?0.9 V vs. RHE. Operando X‐ray absorption spectroscopy and quasi in situ X‐ray photoelectron spectroscopy measurements revealed that the high C₂₊ selectivity of these nanostructured Cu catalysts can be attributed to the highly roughened surface morphology induced by the synthesis, presence of subsurface oxygen and Cu⁺ species, and the adsorbed halides.     

Thiol‐Assisted Synthesis of Carbon‐Supported Metal Nanoparticles for Efficient Electrocatalytic CO2 Reduction

The typical preparation route of carbon‐supported metallic catalyst is complex and uneconomical. Herein, we reported a thiol‐assisted one‐pot method by using 3‐mercaptopropionic acid (MPA) to synthesize carbon‐supported metal nanoparticles catalysts for efficient electrocatalytic reduction of carbon dioxide (CO₂RR). We found that the synthesized Au?MPA/C catalyst achieves a maximum CO faradaic efficiency (FE) of 96.2% with its partial current density of ?11.4 mA/cm², which is much higher than that over Au foil or MPA‐free carbon‐supported Au (Au/C). The performance improvement in CO₂RR over the catalyst is probably derived from the good dispersion of Au nanoparticles and the surface modification of the catalyst caused by the specific interaction between Au nanoparticles and MPA. This thiol‐assisted method can be also extended to synthesize Ag?MPA/C with enhanced CO₂RR performance.     

Effect of methane co-feeding on the selectivity of ethylene produced from oxidative dehydrogenation of ethane with CO2 over a Ni-La/SiO2 catalyst

A Ni-La/SiO₂ catalyst was prepared through the incipient wetness impregnation method and tested in the oxidative dehydrogenation of ethane (ODHE) with CO₂. The fresh and used catalysts were characterized by XRD and SEM techniques. The Ni-La/SiO₂ catalyst exhibited catalytic activity for the oxidative dehydrogenation of ethane, but with low ethylene selectivity in the absence of methane. The selectivity to ethylene increased with increasing molar ratio of methane in the feed. The carbon deposited on the catalyst surface in the sole ODHE with CO₂ was mainly inert carbon, while much more filamentous carbon was formed in the presence of methane. The filamentous carbon was easy to be removed by CO₂, which might play a role in improving the conversion of ethane to ethylene. The introduction of methane might affect the equilibrium of the CO₂ reforming of ethane and the ODHE with CO₂. As a consequence, the synthesis gas produced from CO₂ reforming of methane partly inhibited the reaction of ethane and promoted the ODHE with CO₂, thus increasing the selectivity of ethylene.     

Catalytic performance of silica-supported chromium oxide catalysts in ethane dehydrogenation with carbon dioxide

The oxidative dehydrogenation of ethane into ethylene by CO₂ over a series of silica-supported chromium oxide catalysts was investigated. The results showed that the catalysts were effective for the reaction and CO₂ in the feed promoted the catalytic activity. The 5%Cr/SiO₂ catalyst exhibited the excellent performance with 30.7% ethane conversion and 96.5% ethylene selectivity at 700^oC. ESR and UV-DRS were used to probe the active sites and the species with high valent states (Cr⁵⁺ and/or Cr⁶⁺) were found to be important for the reaction.     

Constructing low-valent Ni nanoparticles for highly selective CO2 reduction

The electroreduction of CO₂（CO₂RR） into value-added chemicals is a sustainable strategy for mitigating global warming and managing the global carbon balance. However, developing an efficient and selective catalyst is still the central challenge. Here, we developed a simple two-step pyrolysis method to confine low-valent Ni-based nanoparticles within nitrogen-doped carbon（Ni-NC）. As a result, such Ni-based nanoparticles can effectively reduce CO₂ to CO, with a max...     

A Water-Soluble Sodium Pectate Complex with Copper as an Electrochemical Catalyst for Carbon Dioxide Reduction

A selective noble-metal-free molecular catalyst has emerged as a fruitful approach in the quest for designing efficient and stable catalytic materials for CO₂ reduction. In this work, we report that a sodium pectate complex of copper (PG-NaCu) proved to be highly active in the electrocatalytic conversion of CO₂ to CH₄ in water. Stability and selectivity of conversion of CO₂ to CH₄ as a product at a glassy carbon electrode were discovered. The copper complex PG-NaCu was synthesized and characterized by physicochemical methods. The electrochemical CO₂ reduction reaction (CO₂RR) proceeds at −1.5 V vs. Ag/AgCl at ~10 mA/cm² current densities in the presence of the catalyst. The current density decreases by less than 20% within 12 h of electrolysis (the main decrease occurs in the first 3 h of electrolysis in the presence of CO₂). This copper pectate complex (PG-NaCu) combines the advantages of heterogeneous and homogeneous catalysts, the stability of heterogeneous solid materials and the performance (high activity and selectivity) of molecular catalysts.     

Dispersed Nickel Cobalt Oxyphosphide Nanoparticles Confined in Multichannel Hollow Carbon Fibers for Photocatalytic CO2 Reduction

Materials for high‐efficiency photocatalytic CO₂ reduction are desirable for solar‐to‐carbon fuel conversion. Herein, highly dispersed nickel cobalt oxyphosphide nanoparticles (NiCoOP NPs) were confined in multichannel hollow carbon fibers (MHCFs) to construct the NiCoOP‐NPs@MHCFs catalysts for efficient CO₂ photoreduction. The synthesis involves electrospinning, phosphidation, and carbonization steps and permits facile tuning of chemical composition. In the catalyst, the mixed metal oxyphosphide NPs with ultrasmall size and high dispersion offer abundant catalytically active sites for redox reactions. At the same time, the multichannel hollow carbon matrix with high conductivity and open ends will effectively promote mass/charge transfer, improve CO₂ adsorption, and prevent the metal oxyphosphide NPs from aggregation. The optimized hetero‐metal oxyphosphide catalyst exhibits considerable activity for photosensitized CO₂ reduction, affording a high CO evolution rate of 16.6 μmol h^?1 (per 0.1 mg of catalyst).     

Dimethyl Carbonate Synthesis from CO2 over CeO2 with Electron-Enriched Lattice Oxygen Species

Direct synthesis of dimethyl carbonate (DMC) from CO₂ plays an important role in carbon neutrality, but its efficiency is still far from the practical application, due to the limited understanding of the reaction mechanism and rational design of efficient catalyst. Herein, abundant electron-enriched lattice oxygen species were introduced into CeO₂ catalyst by constructing the point defects and crystal-terminated phases in the crystal reconstruction process. Benefitting from the acid-base properties modulated by the electron-enriched lattice oxygen, the optimized CeO₂ catalyst exhibited a much higher DMC yield of 22.2 mmol g^-1 than the reported metal-oxide-based catalysts at the similar conditions. Mechanistic investigations illustrated that the electron-enriched lattice oxygen can provide abundant sites for CO₂ adsorption and activation, and was advantageous of the formation of the weakly adsorbed active methoxy species. These were facilitating to the coupling of methoxy and CO₂ for the key *CH₃OCOO intermediate formation. More importantly, the weakened adsorption of *CH₃OCOO on the electron-enriched lattice oxygen can switch the rate-determining-step (RDS) of DMC synthesis from *CH₃OCOO formation to *CH₃OCOO dissociation, and lower the corresponding activation barriers, thus giving rise to a high performance. This work provides insights into the underlying reaction mechanism for DMC synthesis from CO₂ and methanol and the design of highly efficient catalysts.     

SYNTHESIS,CHARACTERIZATION, AND SURFACE ACTIVITY OF SURFACTANTS DERIVED FROM NONYLPHENOL,ETHYLENE OXIDE AND CARBON DIOXIDE

The synthesis of the nonylphenol poly(ethylene carbonate) surfactants derived from nonylphenol (NP), carbon dioxide and ethylene oxide (EO) were carried out with high yields in the presence of alkali metal salts (K₂CO₃, Na₂CO₃, K₂SnO₃ and zinc glutamate) as base catalysts. The synthesis reactions were carried out in a stainless-steel reactor in the temperature range of 150-200°C under an initial pressure of 800 psi, with an initial molar ratio of CO2/EO = 0·21, catalyst concentration of 1 × 10³ M for a 24 h-period. The surfactants were characterized by FT-IR and by H-NMR. The percentages of carbon dioxide incorporation were between 7 and 16% indicating that the activation of CO₂ is a rather difficult process under the catalytic conditions used L175-200 °C and 800 psi of final pressure)

It was found that the most probable mechanism for the synthesis of the surfactants occurs in two steps. The first reaction involves the role of the base as a catalyst for the formation of the cyclic ethylene carbonate from CO₂ and ethylene oxide. The next step is the reaction of the nonylphenol in the presence of cyclic ethylene carbonate and ethylene oxide to generate the surface active compounds. This mechanism indicates that for each mol of carbon dioxide incorporated, one mol of EO has to be added.

The CMC values of the surfactants decrease (from 200 to 100 mM) with the increase in the molar ratio CO₂/EO (from 0·08 to 0·3) which can be attributted to a decrease in the hydrophilic character of the surfactant heads due to the addition of carbonate groups(-O-C(=0)-0-) to the ethoxylated chains (between I to 3 moles).     

High-Curvature Transition-Metal Chalcogenide Nanostructures with a Pronounced Proximity Effect Enable Fast and Selective CO2 Electroreduction

A considerable challenge in the conversion of carbon dioxide into useful fuels comes from the activation of CO₂ to CO₂^.− or other intermediates, which often requires precious-metal catalysts, high overpotentials, and/or electrolyte additives (e.g., ionic liquids). We report a microwave heating strategy for synthesizing a transition-metal chalcogenide nanostructure that efficiently catalyzes CO₂ electroreduction to carbon monoxide (CO). We found that the cadmium sulfide (CdS) nanoneedle arrays exhibit an unprecedented current density of 212 mA cm⁻² with 95.5±4.0 % CO Faraday efficiency at −1.2 V versus a reversible hydrogen electrode (RHE; without iR correction). Experimental and computational studies show that the high-curvature CdS nanostructured catalyst has a pronounced proximity effect which gives rise to large electric field enhancement, which can concentrate alkali-metal cations resulting in the enhanced CO₂ electroreduction efficiency.     

Preparation of trimetallic electrocatalysts by one-step co-electrodeposition and efficient CO2 reduction to ethylene

Use of multi-metallic catalysts to enhance reactions is an interesting research area, which has attracted much attention. In this work, we carried out the first work to prepare trimetallic electrocatalysts by a one-step co-electrodeposition process. A series of Cu–X–Y (X and Y denote different metals) catalysts were fabricated using this method. It was found that Cu₁₀La₁Cs₁ (the content ratio of Cu²⁺, La³⁺, and Cs⁺ in the electrolyte is 10 : 1 : 1 in the deposition process), which had an elemental composition of Cu₁₀La_0.16Cs_0.14 in the catalyst, formed a composite structure on three dimensional (3D) carbon paper (CP), which showed outstanding performance for CO₂ electroreduction reaction (CO₂RR) to produce ethylene (C₂H₄). The faradaic efficiency (FE) of C₂H₄ could reach 56.9% with a current density of 37.4 mA cm⁻² in an H-type cell, and the partial current density of C₂H₄ was among the highest ones up to date, including those over the catalysts consisting of Cu and noble metals. Moreover, the FE of C₂₊ products (C₂H₄, ethanol, and propanol) over the Cu₁₀La₁Cs₁ catalyst in a flow cell reached 70.5% with a high current density of 486 mA cm⁻². Experimental and theoretical studies suggested that the doping of La and Cs into Cu could efficiently enhance the reaction efficiency via a combination of different effects, such as defects, change of electronic structure, and enhanced charge transfer rate. This work provides a simple method to prepare multi-metallic catalysts and demonstrates a successful example for highly efficient CO₂RR using non-noble metals.

Trimetallic Cu₁₀La₁Cs₁ catalysts prepared via a one-step co-electrodeposition strategy can act as a robust electrocatalyst for CO₂RR to C₂H₄.     

助剂对NiMgAl催化剂的结构和甲烷二氧化碳重整反应性能的影响(英文)

向担载镍基催化剂NiMgAl中添加助剂(Co,Ir或Pt)制备了三种助剂促进型催化剂,通过氢气程序升温还原(H2-TPR),CO2/CH4程序升温表面反应(CO2/CH4-TPSR)和CO2程序升温脱附(CO2-TPD)等方法对催化剂进行表征.助剂对催化剂性能的影响通过甲烷干重整实验进行评价.添加少量的Pt或Ir助剂可以降低Ni活性组分的还原温度和提高反应性能.添加助剂的样品与原始NiMgAl催化剂相比能够降低反应的活化能,添加Co或Ir助剂的催化剂与NiMgAl催化剂相比活化能有了明显的降低.NiMgAl催化剂的活化能为51.8 kJ·mol-1,添加Pt助剂的NiPtMgAl催化剂活化能降至26.4 kJ·mol-1.NiMgAl催化剂中添加Pt助剂制备的催化剂具有较好的催化活性和较低的活化能.CH4-TPSR和CO2-TPSR结果表明添加Pt助剂可以在更低的温度下(与NiMgAl催化剂相比)提高CH4的活化能力,并在催化剂表面形成更多的碳物种.CO2-TPD结果显示,添加助剂的催化剂与NiMgAl样品相比在反应温度区间内增加了CO2的吸附/脱附量.     

In-Situ-Formed Potassium-Modified Nickel-Zinc Carbide Boosts Production of Higher Alcohols beyond CH4 in CO2 Hydrogenation

Ni-based catalysts have been widely studied in the hydrogenation of CO₂ to CH₄, but selective and efficient synthesis of higher alcohols (C₂₊OH) from CO₂ hydrogenation over Ni-based catalyst is still challenging due to successive hydrogenation of C1 intermediates leading to methanation. Herein, we report an unprecedented synthesis of C₂₊OH from CO₂ hydrogenation over K-modified Ni−Zn bimetal catalyst with promising activity and selectivity. Systematic experiments (including XRD, in situ spectroscopic characterization) and computational studies reveal the in situ generation of an active K-modified Ni−Zn carbide (K-Ni₃Zn₁C_0.7) by carburization of Zn-incorporated Ni⁰, which can significantly enhance CO₂ adsorption and the surface coverage of alkyl intermediates, and boost the C−C coupling to C₂₊OH rather than conventional CH₄. This work opens a new catalytic avenue toward CO₂ hydrogenation to C₂₊OH, and also provides an insightful example for the rational design of selective and efficient Ni-based catalysts for CO₂ hydrogenation to multiple carbon products.     

Rhodium-Catalyzed Acrylate Synthesis from Carbon Dioxide and Ethylene by using a Guanidine-Based Pincer Ligand: Perturbing Occupied d-Orbitals by pπ-dπ Repulsion Makes a Difference

Rhodium-catalyzed acrylate synthesis from CO₂ and ethylene was accomplished by using a guanidine-based NCN pincer ligand. The repulsion between pπ-electron of guanidine sidearms and occupied dπ orbital of rhodium center raised the level of d-electrons close to those of formerly known d⁸-ruthenium catalyst, thereby promoting the metallalactone formation from carbon dioxide and ethylene. This work fills the absence of group-9 metal based catalyst for the acrylate synthesis and provides a designing approach for pincer-ligated d⁸-metal catalysts to utilize pπ-dπ interaction for promoting desirable redox processes.     

Electrocatalytic CO2 Upgrading to Triethanolamine by Bromine-Assisted C2H4 Oxidation

The electrocatalytic carbon dioxide (CO₂) reduction is a promising approach for converting this greenhouse gas into value-added chemicals, while the capability of producing products with longer carbon chains (C_n>3) is limited. Herein, we demonstrate the Br-assisted electrocatalytic oxidation of ethylene (C₂H₄), a major CO₂ electroreduction product, into 2-bromoethanol by electro-generated bromine on metal phthalocyanine catalysts. Due to the preferential formation of Br₂ over *O or Cl₂ to activate the C=C bond, a high partial current density of producing 2-bromoethanol (46.6 mA⋅cm⁻²) was obtained with 87.2 % Faradaic efficiency. Further coupling with the electrocatalytic nitrite reduction to ammonia at the cathode allowed the production of triethanolamine with six carbon atoms. Moreover, by coupling a CO₂ electrolysis cell for in situ C₂H₄ generation and a C₂H₄ oxidation/nitrite reduction cell, the capability of upgrading of CO₂ and nitrite into triethanolamine was demonstrated.     

High‐Curvature Transition‐Metal Chalcogenide Nanostructures with a Pronounced Proximity Effect Enable Fast and Selective CO2 Electroreduction

A considerable challenge in the conversion of carbon dioxide into useful fuels comes from the activation of CO₂ to CO₂^.? or other intermediates, which often requires precious‐metal catalysts, high overpotentials, and/or electrolyte additives (e.g., ionic liquids). We report a microwave heating strategy for synthesizing a transition‐metal chalcogenide nanostructure that efficiently catalyzes CO₂ electroreduction to carbon monoxide (CO). We found that the cadmium sulfide (CdS) nanoneedle arrays exhibit an unprecedented current density of 212 mA cm^?2 with 95.5±4.0 % CO Faraday efficiency at ?1.2 V versus a reversible hydrogen electrode (RHE; without iR correction). Experimental and computational studies show that the high‐curvature CdS nanostructured catalyst has a pronounced proximity effect which gives rise to large electric field enhancement, which can concentrate alkali‐metal cations resulting in the enhanced CO₂ electroreduction efficiency.     

Efficient CO2 Hydrogenation to Formate with Immobilized Ir-Catalysts Based on Mesoporous Silica Beads

The Nozaki Ir-based CO₂ hydrogenation catalyst was successfully immobilized on post-functionalized silica beads (d=200 μm) through click chemistry. This material hydrogenates CO₂ into formic acid with turnover numbers reaching 2.8×10⁴ in a batch reactor within 24 hours, paving the way towards the design of efficient heterogeneous catalysts for this transformation.     

Achieving High Single-Pass Carbon Conversion Efficiencies in Durable CO2 Electroreduction in Strong Acids via Electrode Structure Engineering

Acidic CO₂ reduction (CO₂R) holds promise for the synthesis of low-carbon-footprint chemicals using renewable electricity. However, the corrosion of catalysts in strong acids causes severe hydrogen evolution and rapid deterioration of CO₂R performance. Here, by coating catalysts with an electrically nonconductive nanoporous SiC-Nafion^TM layer, a near-neutral pH was stabilized on catalyst surfaces, thereby protecting the catalysts against corrosion for durable CO₂R in strong acids. Electrode microstructures played a critical role in regulating ion diffusion and stabilizing electrohydrodynamic flows near catalyst surfaces. This surface-coating strategy was applied to three catalysts, SnBi, Ag, and Cu, and they exhibited high activity over extended CO₂R operation in strong acids. Using a stratified SiC-Nafion^TM/SnBi/polytetrafluoroethylene (PTFE) electrode, constant production of formic acid was achieved with a single-pass carbon efficiency of >75 % and Faradaic efficiency of >90 % at 100 mA cm⁻² over 125 h at pH 1.     

Hydrodechlorination of Dichloromethane by a Metal-Free Triazole-Porphyrin Electrocatalyst: Demonstration of Main-Group Element Electrocatalysis**

In this work, the electrocatalytic reduction of dichloromethane (CH₂Cl₂) into hydrocarbons involving a main group element-based molecular triazole-porphyrin electrocatalyst H2PorT8 is reported. This catalyst converted CH₂Cl₂ in acetonitrile to various hydrocarbons (methane, ethane, and ethylene) with a Faradaic efficiency of 70 % and current density of −13 mA cm⁻² at a potential of −2.2 V vs. Fc/Fc⁺ using water as a proton source. The findings of this study and its mechanistic interpretations demonstrated that H2PorT8 was an efficient and stable catalyst for the hydrodechlorination of CH₂Cl₂ and that main group catalysts could be potentially used for exploring new catalytic reaction mechanisms.     

Highly Rechargeable Lithium‐CO2 Batteries with a Boron‐ and Nitrogen‐Codoped Holey‐Graphene Cathode

Metal‐air batteries, especially Li‐air batteries, have attracted significant research attention in the past decade. However, the electrochemical reactions between CO₂ (0.04 % in ambient air) with Li anode may lead to the irreversible formation of insulating Li₂CO₃, making the battery less rechargeable. To make the Li‐CO₂ batteries usable under ambient conditions, it is critical to develop highly efficient catalysts for the CO₂ reduction and evolution reactions and investigate the electrochemical behavior of Li‐CO₂ batteries. Here, we demonstrate a rechargeable Li‐CO₂ battery with a high reversibility by using B,N‐codoped holey graphene as a highly efficient catalyst for CO₂ reduction and evolution reactions. Benefiting from the unique porous holey nanostructure and high catalytic activity of the cathode, the as‐prepared Li‐CO₂ batteries exhibit high reversibility, low polarization, excellent rate performance, and superior long‐term cycling stability over 200 cycles at a high current density of 1.0 A g⁻¹. Our results open up new possibilities for the development of long‐term Li‐air batteries reusable under ambient conditions, and the utilization and storage of CO₂.