Suppressive Strong Metal-Support Interactions on Ruthenium/TiO2 Promote Light-Driven Photothermal CO2 Reduction with Methane

Strong metal-support interactions (SMSI) have gained great attention in the heterogeneous catalysis field, but its negative role in regulating light-induced electron transfer is rarely explored. Herein, we describe how SMSI significantly restrains the activity of Ru/TiO₂ in light-driven CO₂ reduction by CH₄ due to the photo-induced transfer of electrons from TiO₂ to Ru. In contrast, on suppression of SMSI Ru/TiO₂−H₂ achieves a 46-fold CO₂ conversion rate compared to Ru/TiO₂. For Ru/TiO₂−H₂, a considerable number of photo-excited hot electrons from Ru nanoparticles (NPs) migrate to oxygen vacancies (OVs) and facilitate CO₂ activation under illumination, simultaneously rendering Ru^δ+ electron deficient and better able to accelerate CH₄ decomposition. Consequently, photothermal catalysis over Ru/TiO₂−H₂ lowers the activation energy and overcomes the limitations of a purely thermal system. This work offers a novel strategy for designing efficient photothermal catalysts by regulating two-phase interactions.     

Tuning the CO2 Hydrogenation Selectivity of Rhodium Single-Atom Catalysts on Zirconium Dioxide with Alkali Ions

Tuning the coordination environments of metal single atoms (M₁) in single-atom catalysts has shown large impacts on catalytic activity and stability but often barely on selectivity in thermocatalysis. Here, we report that simultaneously regulating both Rh₁ atoms and ZrO₂ support with alkali ions (e.g., Na) enables efficient switching of the reaction products from nearly 100 % CH₄ to above 99 % CO in CO₂ hydrogenation in a wide temperature range (240–440 °C) along with a record high activity of 9.4 mol_CO g_Rh⁻¹ h⁻¹ at 300 °C and long-term stability. In situ spectroscopic characterization and theoretical calculations unveil that alkali ions on ZrO₂ change the surface intermediate from formate to carboxy species during CO₂ activation, thus leading to exclusive CO formation. Meanwhile, alkali ions also reinforce the electronic Rh₁-support interactions, endowing the Rh₁ atoms more electron deficient, which improves the stability against sintering and inhibits deep hydrogenation of CO to CH₄.     

Influence of the Time Scale on the Reaction Mechanism of CO Oxidation over a Au/TiO2 Catalyst

Knowledge of the reaction mechanism is key for rational catalyst improvement. Traditionally mechanistic studies focus on structure and the reaction conditions like temperature, pH, pressure, etc., whereas the time dimension is often overlooked. Here, we demonstrate the influence of time on the mechanism of a catalytic reaction. A dual catalytic mechanism was identified for the CO oxidation over Au/TiO₂ by time-resolved infrared spectroscopy coupled with modulation excitation spectroscopy. During the first seconds, CO on the gold particles is the only reactive species. As the reaction proceeds, the redox properties of TiO₂ dominate the catalytic activity through electronic metal-support interaction (EMSI). CO induces the reduction and reconstruction of TiO₂ whereas oxygen leads to its oxidation. The activity of the catalyst follows the spectroscopic signature of the EMSI. These findings demonstrate the power of studying short-time kinetics for mechanistic studies.     

Supercharged CO2 Photothermal Catalytic Methanation: High Conversion,Rate, and Selectivity

To overcome the thermodynamic and kinetic impediments of the Sabatier CO₂ methanation reaction, the process must be operated under very high temperature and pressure conditions, to obtain an industrially viable conversion, rate, and selectivity. Herein, we report that these technologically relevant performance metrics have been achieved under much milder conditions using solar rather than thermal energy, where the methanation reaction is enabled by a novel nickel-boron nitride catalyst. In this regard, an in situ generated HOB⋅⋅⋅B surface frustrated Lewis's pair is considered responsible for the high Sabatier conversion 87.68 %, reaction rate 2.03 mol g_Ni⁻¹h⁻¹, and near 100 % selectivity, realized under ambient pressure conditions. This discovery bodes well for an opto-chemical engineering strategy aimed at the development and implementation of a sustainable ‘Solar Sabatier’ methanation process.     

Solar-Driven CO2 Conversion via Optimized Photothermal Catalysis in a Lotus Pod Structure

Photothermal CO₂ reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium-modified carbon-supported cobalt (K⁺−Co−C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus-pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K⁺−Co−C catalyst shows a record-high photothermal CO₂ hydrogenation rate of 758 mmol g_cat⁻¹ h⁻¹ (2871 mmol g_Co⁻¹ h⁻¹) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO₂ reduction reactions. We further demonstrate with this catalyst effective CO₂ conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production.     

Small Cobalt Nanoparticles Favor Reverse Water-Gas Shift Reaction Over Methanation Under CO2 Hydrogenation Conditions**

Cobalt-based catalysts are well-known to convert syngas into a variety of Fischer–Tropsch (FTS) products depending on the various reaction parameters, in particular particle size. In contrast, the reactivity of these particles has been much less investigated in the context of CO₂ hydrogenation. In that context, Surface organometallic chemistry (SOMC) was employed to synthesize highly dispersed cobalt nanoparticles (Co-NPs) with particle sizes ranging from 1.6 to 3.0 nm. These SOMC-derived Co-NPs display significantly different catalytic performances under CO₂ hydrogenation conditions: while the smallest cobalt nanoparticles (1.6 nm) catalyze mainly the reverse water-gas shift (rWGS) reaction, the larger nanoparticles (2.1–3.0 nm) favor the expected methanation activity. Operando X-ray absorption spectroscopy shows that the smaller cobalt particles are fully oxidized under CO₂ hydrogenation conditions, while the larger ones remain mostly metallic, paralleling the observed difference of catalytic performances. This fundamental shift of selectivity, away from methanation to reverse water-gas shift for the smaller nanoparticles is noteworthy and correlates with the formation of CoO under CO₂ hydrogenation conditions.     

Boosting CO2 Hydrogenation to Formate over Edge-Sulfur Vacancies of Molybdenum Disulfide

Synthesis of formate from hydrogenation of carbon dioxide (CO₂) is an atom-economic reaction but is confronted with challenges in developing high-performance non-precious metal catalysts for application of the process. Herein, we report a highly durable edge-rich molybdenum disulfide (MoS₂) catalyst for CO₂ hydrogenation to formate at 200 °C, which delivers a high selectivity of over 99 % with a superior turnover frequency of 780.7 h⁻¹ surpassing those of previously reported non-precious metal catalysts. Multiple experimental characterization techniques combined with theoretical calculations reveal that sulfur vacancies at MoS₂ edges are the active sites and the selective production of formate is enabled via a completely new water-mediated hydrogenation mechanism, in which surface OH* and H* species in dynamic equilibrium with water serve as moderate hydrogenating agents for CO₂ with residual O* reduced by hydrogen. This study provides a new route for developing low-cost high-performance catalysts for CO₂ hydrogenation to formate.     

Unravelling the Promotional Effect of La2O3 in Pt/La-TiO2 Catalysts for CO2 Hydrogenation

This work reports the preparation of a La₂O₃-modified Pt/TiO₂ (Pt/La-TiO₂) hybrid through an excess-solution impregnation method and its application for CO₂ hydrogenation catalysis. The Pt/La-TiO₂ catalyst is characterized by XRD, H₂ temperature-programmed reduction (TPR), TEM, X-ray photoelectron spectroscopy (XPS), Raman, EPR, and N₂ sorption measurements. The Pt/La-TiO₂ composite starts to catalyze the CO₂ conversion reaction at 220 °C, which is 30 °C lower than the Pt/TiO₂ catalyst. The generation of CH₄ and CO of Pt/La-TiO₂ is 1.6 and 1.4 times greater than that of Pt/TiO₂. The CO₂ temperature-programmed desorption (TPD) analysis confirms the strengthened CO₂ adsorption on Pt/La-TiO₂. Moreover, the in situ FTIR experiments demonstrate that the enhanced CO₂ adsorption of Pt/La-TiO₂ facilitates the formation of the active Pt–CO intermediate and subsequently boosts the evolution of CH₄ and CO. The cycling tests reveal that Pt/La-TiO₂ shows reinforced stability for the CO₂ hydrogenation reaction because the La species can prevent Pt nanoparticles (NPs) from sintering. This work may provide some guidance on the development new rare-metal-modified hybrid catalysts for CO₂ fixation.     

Photo-Induced Switching of CO2 Hydrogenation Pathway towards CH3OH Production over Pt@UiO-66-NH2(Co)

It is highly desired to achieve controllable product selectivity in CO₂ hydrogenation. Herein, we report light-induced switching of reaction pathways of CO₂ hydrogenation towards CH₃OH production over actomically dispersed Co decorated Pt@UiO-66-NH₂. CO, being the main product in the reverse water gas shift (RWGS) pathway under thermocatalysis condition, is switched to CH₃OH via the formate pathway with the assistance of light irradiation. Impressively, the space-time yield of CH₃OH in photo-assisted thermocatalysis (1916.3 μmol g_cat⁻¹ h⁻¹) is about 7.8 times higher than that without light at 240 °C and 1.5 MPa. Mechanism investigation indicates that upon light irradiation, excited UiO-66-NH₂ can transfer electrons to Pt nanoparticles and Co sites, which can efficiently catalyze the critical elementary steps (i.e., CO₂-to-*HCOO conversion), thus suppressing the RWGS pathway to achieve a high CH₃OH selectivity.     

Metal-Free Photocatalytic CO2 Reduction to CH4 and H2O2 under Non-sacrificial Ambient Conditions

Photocatalytic CO₂ reduction to CH₄ requires photosensitizers and sacrificial agents to provide sufficient electrons and protons through metal-based photocatalysts, and the separation of CH₄ from by-product O₂ has poor applications. Herein, we successfully synthesize a metal-free photocatalyst of a novel electron-acceptor 4,5,9,10-pyrenetetrone (PT), to our best knowledge, this is the first time that metal-free catalyst achieves non-sacrificial photocatalytic CO₂ to CH₄ and easily separable H₂O₂. This photocatalyst offers CH₄ product of 10.6 μmol ⋅ g⁻¹ ⋅ h⁻¹ under non-sacrificial ambient conditions (room temperature, and only water), which is two orders of magnitude higher than that of the reported metal-free photocatalysts. Comprehensive in situ characterizations and calculations reveal a multi-step reaction mechanism, in which the long-lived oxygen-centered radical in the excited PT provides as a site for CO₂ activation, resulting in a stabilized cyclic carbonate intermediate with a lower formation energy. This key intermediate is thermodynamically crucial for the subsequent reduction to CH₄ product with the electronic selectivity of up to 90 %. The work provides fresh insights on the economic viability of photocatalytic CO₂ reduction to easily separable CH₄ in non-sacrificial and metal-free conditions.     

Study of CO2 Hydrogenation to Methanol over Cu-V/γ-Al2O3 Catalyst

The effect of vanadium addition to Cu/γ-Al2O3 catalyst used in the hydrogenation of CO2 to produce methanol was studied. It was found that the catalytic performance of the Cu-based catalyst improved after V addition. The influence of reaction temperature, space velocity and the molar ratio of H2 to CO2 on the performance of 12%Cu-6%V/γ-Al2Oa catalyst were also studied. The results indicated that the best conditions for reaction were as follows: 240 ℃, 3600 h-1 and a molar ratio of H2 to CO2 the dispersion of the supported CuO species, which resulted in the enhanced catalytic performance of Cu-V/γ-Al2O3 binary catalyst.     

MOF Encapsulated AuPt Bimetallic Nanoparticles for Improved Plasmonic-induced Photothermal Catalysis of CO2 Hydrogenation

Exploring new catalytic strategies for achieving efficient CO₂ hydrogenation under mild conditions is of great significance for environmental remediation. Herein, a composite photocatalyst Zr-based MOF encapsulated plasmonic AuPt alloy nanoparticles (AuPt@UiO-66-NH₂) was successfully constructed for the efficient photothermal catalysis of CO₂ hydrogenation. Under light irradiation at 150 °C, AuPt@UiO-66-NH₂ achieved a CO production rate of 1451 μmol g_metal⁻¹ h⁻¹ with 91 % selectivity, which far exceeded those obtained by Au@Pt@UiO-66-NH₂ with Pt shell on Au (599 μmol g_metal⁻¹ h⁻¹) and Au@UiO-66-NH₂ (218 μmol g_metal⁻¹ h⁻¹). The outstanding performances of AuPt@UiO-66-NH₂ were attributed to the synergetic effect originating from the plasmonic metal Au, doped active metal Pt, and encapsulation structure of UiO-66-NH₂ shell. This work provides a new way for photothermal catalysis of CO₂ and a reference for the design of high-performance plasmonic catalysts.     

催化剂表面Cu0含量对二氧化碳加氢合成C2+醇性能的影响

通过在空气气氛下焙烧Cu@Fe-MIL-88B MOF材料制备了CuFe组分均匀分散的催化剂前驱物, 该前驱物经过不同温度下的预还原制得表面具有不同Cu和Fe价态分布的系列催化剂. 将所制备的催化剂用于固定床反应器上CO₂加氢合成C₂₊醇的性能研究, 并结合催化剂的X射线衍射(XRD)、 X射线光电子能谱(XPS)、 氢气程序升温还原(H₂-TPR)、 氮气吸附-脱附、 扫描电子显微镜(SEM) 和高分辨率透射电子显微镜(HRTEM)等表征结果发现, 较高的还原温度增加了催化剂表面低价态的Cu和Fe的含量; 当还原温度为350 ℃时, 催化剂表面Cu⁰/(Cu⁺+Cu⁰)摩尔比为73.9%, 单质Fe摩尔分数为0.40%, 催化效果最好, CO₂转化率达到6.82%, 总醇选择性为39.4%, 其中C₂₊醇的摩尔比达到95.1%.     

Ni催化剂上一氧化碳加氢反应机理研究

Ｎｉ催化剂上一氧化碳加氢反应机理研究胡云行，万惠霖，关玉德，林恒生（厦门大学化学系，固体表面物理化学国家重点实验室，厦门，３６１００５）（中国科学院山西煤炭化学研究所，太原）关键词脉冲法，一氧化碳，加氢，反应机理自本世纪初报道了一氧化碳加氢生成甲烷以...     

CuOx/TiO2光催化水蒸气还原CO2

以商品TiO2-P25为原料,通过浸渍法负载一定量过渡金属Cu,得到一系列不同含量的CuOx/TiO2光催化剂。利用X射线衍射（XRD）,X－射线光电子能谱（XPS）,BET,高分辨率透射镜（HRTEM）,X射线荧光光谱（XRF）和光致发光光谱（PL）等方法对催化剂进行了详细表征,在自建的光催化反应器中评价了气态水光催化还原CO2反应的活性和CH4收率。结果表明负载CuOx后的TiO2纳米材料光催化性能显著提高,其中1%CuOx/TiO2样品紫外光照72 h后,CH4生成量达到了24.86 µmol•gTi-1。同时,CuOx负载量、反应温度、反应时间等因素对CH4收率均有显著影响。     

Reaction-Induced Metal-Metal Oxide Interactions in Pd-In2O3/ZrO2 Catalysts Drive Selective and Stable CO2 Hydrogenation to Methanol

Ternary Pd-In₂O₃/ZrO₂ catalysts exhibit technological potential for CO₂-based methanol synthesis, but developing scalable systems and comprehending complex dynamic behaviors of the active phase, promoter, and carrier are key for achieving high productivity. Here, we show that the structure of Pd-In₂O₃/ZrO₂ systems prepared by wet impregnation evolves under CO₂ hydrogenation conditions into a selective and stable architecture, independent of the order of addition of Pd and In phases on the zirconia carrier. Detailed operando characterization and simulations reveal a rapid restructuring driven by the metal-metal oxide interaction energetics. The proximity of InPd_x alloy particles decorated by InO_x layers in the resulting architecture prevents performance losses associated with Pd sintering. The findings highlight the crucial role of reaction-induced restructuring in complex CO₂ hydrogenation catalysts and offer insights into the optimal integration of acid-base and redox functions for practical implementation.     

光照对Pt/Al2O3光热CO2加氢反应的增强作用（英文）

在传统热催化材料的研究领域中,光照技术已经得到了广泛的应用,从而使传统热催化剂的催化反应活性和选择性得到优化.然而,在光热协同催化反应过程中,光照因素对催化反应过程的影响尚未得到很好地研究和理解.本文通过浸渍法制得Pt/Al2O3催化剂,并应用于光热协同催化CO2加氢反应.结果证明,在光热协同CO2加氢催化反应中, Pt/Al2O3催化剂表现出光热协同效应.本文结合原位漫反射红外光谱(operandoDRIFTS)和密度泛函理论计算(DFT)对光照因素对该催化反应过程的作用机制进行了进一步深入研究.结果表明, CO气体分子从Pt纳米颗粒上的脱附过程为CO2加氢反应的重要步骤;CO气体分子在Pt纳米颗粒上脱附的位置包含台阶位置(Ptstep)和平台位置(Ptterrace).结果表明,反应过程中CO气体分子从Pt表面的脱附有利于催化剂暴露出Pt反应活性位点.值得注意的是,在光热协同催化CO2加氢反应过程中,光照和温度因素对CO气体分子的脱附过程具有不同影响.吸附能的计算结果证明, CO气体分子吸附在Ptstep和Ptterrace上的吸附能分别为-1.24和-1.43eV.由此可见, CO气体分子与Pt纳米颗粒上的Ptstep吸附位点之间相互作用更强.在无光照作用的条件下对催化剂进行加热, CO气体分子更容易从Ptterrace吸附位点发生脱附;但是在对应的温度下加入光照作用后,吸附在Ptstep位点上的CO气体分子会先转移到Ptterrace吸附位点上,随后脱附,从而促进CO2加氢反应的进行.     

单原子材料在二氧化碳催化中的技术经济分析与产业化应用前景

近年来, 随着科学研究的不断深入, 单原子催化剂由于具有高活性与高选择性等突出特点被广泛挖掘和应用. 作为连接多相与均相催化的桥梁, 单原子催化剂已经成为催化领域的重要研究对象之一, 具有广泛的工业化应用前景. 本文对单原子催化剂的发展历程、 特点及其在不同领域的应用进行了概括, 综合评述了当前CO₂还原领域的技术经济分析, 并首次对单原子材料催化转化CO₂进行了技术经济分析与计算. 最后, 对单原子催化剂在CO₂还原领域中工业化应用的未来发展方向及亟需解决的关键科学和技术问题进行了展望, 以期推动单原子催化材料的进一步广泛应用.     

Pd基多相催化剂上CO2加氢反应的研究进展

随着二氧化碳(CO₂)排放量的不断增加, 全球变暖和气候变化的加剧对人类的生存环境产生了巨大的影响. CO₂作为廉价、 可再生的碳氧资源, 将其转化为高附加值化学品是绿色化学及能源领域的重要研究课题之一, 受到广泛关注. Pd基催化剂由于具有优异的加氢能力以及良好的抗烧结、 抗毒化性能, 作为CO₂催化转化最有前途的催化剂被广泛应用和研究. 本文主要对Pd基催化剂上CO₂加氢制备HCOOH, CO, CH₄和甲醇等小分子能源化合物的研究进展进行综合评述, 重点关注Pd基催化剂上CO₂分子的吸附/活化位点、 催化剂的金属-载体强相互作用及表界面组成等对催化剂活性和选择性的影响以及催化反应机理.     

Tuning C1/C2 Selectivity of CO2 Electrochemical Reduction over in-Situ Evolved CuO/SnO2 Heterostructure

Heterostructured oxides with versatile active sites, as a class of efficient catalysts for CO₂ electrochemical reduction (CO₂ER), are prone to undergo structure reconstruction under working conditions, thus bringing challenges to understanding the reaction mechanism and rationally designing catalysts. Herein, we for the first time elucidate the structural reconstruction of CuO/SnO₂ under electrochemical potentials and reveal the intrinsic relationship between CO₂ER product selectivity and the in situ evolved heterostructures. At −0.85 V_RHE, the CuO/SnO₂ evolves to Cu₂O/SnO₂ with high selectivity to HCOOH (Faradaic efficiency of 54.81 %). Mostly interestingly, it is reconstructed to Cu/SnO_2-x at −1.05 V_RHE with significantly improved Faradaic efficiency to ethanol of 39.8 %. In situ Raman spectra and density functional theory (DFT) calculations reveal that the synergetic absorption of *COOH and *CHOCO intermediates at the interface of Cu/SnO_2-x favors the formation of *CO and decreases the energy barrier of C−C coupling, leading to high selectivity to ethanol.