Electronic Circular Dichroism-Circularly Polarized Raman (eCP-Raman): A New Form of Chiral Raman Spectroscopy

This Concept article summarizes recent work on the development of a new form of chiral Raman spectroscopy, e CP-Raman, which combines two spectroscopies: electronic circular dichroism (ECD) and circularly polarized Raman (CP-Raman). First, some puzzling observations while carrying out Raman optical activity (ROA) measurements of several transition metal complexes under resonance are described, as well as the search for the mechanisms responsible. Then an equation for quantifying the e CP-Raman contribution is presented, followed by several examples of how e CP-Raman influences the I_R−I_L spectra of achiral and chiral solvent molecules and of a number of chiral solutes under resonance. The conditions to extract resonance ROA, when the e CP-Raman contribution is minimized, are also discussed. Finally, we comment on the potential applications of e CP-Raman.     

Synthesis and nonlinear optical properties of novel Y‐type polyester containing tricyanovinylthiazolylazoresorcinoxy group with enhanced thermal stability of dipole alignment

Novel Y‐type polyester 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which are parts of the polymer backbone, was prepared, and its NLO properties were investigated. Polyester 4 is soluble in common organic solvents such as N,N‐dimethylformamide and dimethylsulfoxide. Polymer 4 shows a thermal stability up to 250 °C from thermogravimetric analysis with glass‐transition temperature obtained from differential scanning calorimetry of approximately 94 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1560‐nm fundamental wavelength is 8.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 6 °C higher than glass‐transition temperature (T_g), and no significant SHG decay is observed below 100 °C due to the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Chiral Ligand-Driven Systematic Synthesis of Coordination Polymers with Non-centrosymmetric Structures

Chirality is an important concept in chemistry revealing intriguing optical properties such as circular dichroism (CD), circularly polarized luminescence (CPL), etc. As one of the non-centrosymmetric (NCS) classes, chiral materials with extended structures may exhibit unique nonlinear optical (NLO) properties, such as second-harmonic generation (SHG). In this Concept article, a series of recently discovered NCS coordination polymers (CPs) from use of carefully designed chiral organic ligands are reviewed. Combining several metal cations such as lanthanides, lead, zinc, and cadmium with rigid chiral ligands has resulted in interesting CPs with both polar and nonpolar structures. Detailed structures, SHG properties, and structure-property relationships are provided. The importance of hyperpolarizability formed by intermolecular hydrogen boding interactions to SHG is emphasized.     

Enhanced Circularly Polarized Luminescence in Emissive Charge‐Transfer Complexes

Achieving a large dissymmetry factor (g_lum) is a challenge in the field of circularly polarized luminescence (CPL). A chiral charge‐transfer (CT) system consisting of chiral electron donor and achiral electron acceptor shows bright circularly polarized emission with large g_lum value. The chiral emissive CT complexes could be fabricated through various approaches, such as grinding, crystallization, spin coating, and gelatinization, by simply blending chiral donor and achiral acceptor. The structural synergy originating from π–π stacking and strong CT interactions resulted in the long‐range ordered self‐assembly, enabling the formation of supramolecular gels. Benefiting from the large magnetic dipole transition moment in the CT state, the CPL activity of CT complexes exhibited large circular polarization. Our design strategy of the chiral emissive CT complexes is expected to help the development of new molecular engineering strategies for designing highly efficient CPL‐active materials.     

Magnetic dipolar interactions in solid gold nanosphere dimers

We report the first observation of a magnetic dipolar contribution to the nonlinear optical (NLO) response of colloidal metal nanostructures. Second-order NLO responses from several individual solid gold nanosphere (SGN) dimers, which we prepared by a bottom-up approach, were examined using polarization-resolved second harmonic generation (SHG) spectroscopy at the single-particle level. Unambiguous circular dichroism in the SH signal was observed for most of the dimeric colloids, indicating that the plasmon field located within the interparticle gap was chiral. Detailed analysis of the polarization line shapes of the SH intensities obtained by continuous polarization variation suggested that the effect resulted from strong magnetic-dipole contributions to the nanostructure's optical properties.     

The design,synthesis, and nonlinear optical properties of novel X‐type polyurethane containing dicyanovinylnitroresorcinoxy group with enhanced SHG thermal stability

Novel X‐type polyurethane 5 containing 4‐(2′,2′‐dicyanovinyl)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone, was prepared and characterized. Polyurethane 5 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature (T_g) obtained from differential scanning calorimetry thermogram of around 120 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064‐nm fundamental wavelength is around 6.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 5 °C higher than T_g, and there was no SHG decay below 125 °C due to the partial main chain character of the polymer structure, which is acceptable for NLO device applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

CsB4O6F: A Congruent‐Melting Deep‐Ultraviolet Nonlinear Optical Material by Combining Superior Functional Units

The discovery of new nonlinear optical (NLO) materials for coherent light generation in the deep‐ultraviolet (DUV, wavelength below 200 nm) region is essential for the development of laser technologies. Herein, we report a new material CsB₄O₆F (CBF), which combines the superior structural properties of two well‐known NLO materials, β‐BaB₂O₄ (BBO) and KBe₂BO₃F₂ (KBBF). CBF exhibits excellent DUV optical properties including a short cutoff edge (155 nm), a large SHG response (≈1.9×KDP), and a suitable birefringence that enables frequency doubling down to 171.6 nm. Remarkably, CBF melts congruently and shows an improved growth habit. In addition, our rational design strategy will contribute to the discovery of DUV NLO materials.     

NH4Be2BO3F2 and γ‐Be2BO3F: Overcoming the Layering Habit in KBe2BO3F2 for the Next‐Generation Deep‐Ultraviolet Nonlinear Optical Materials

KBe₂BO₃F₂ (KBBF) is still the only practically usable crystal that can generate deep‐ultraviolet (DUV) coherent light by direct second harmonic generation (SHG). However, applications are hindered by layering, leading to difficulty in the growth of thick crystals and compromised mechanical integrity. Despite efforts, it is still a great challenge to discover new nonlinear optical (NLO) materials that overcome the layering while keeping the DUV SHG available. Now, two new DUV NLO beryllium borates have been successfully designed and synthesized, NH₄Be₂BO₃F₂ (ABBF) and γ‐Be₂BO₃F (γ‐BBF), which not only overcome the layering but also can be used as next‐generation DUV NLO materials with the shortest type I phase‐matching second‐harmonic wavelength down to 173.9 nm and 146 nm, respectively. Significantly, γ‐BBF is superior to KBBF in all metrics and would be the most outstanding DUV NLO crystal.     

Pathways to increase the dissymmetry in the interaction of chiral light and chiral molecules

The dissymmetric interaction between circularly polarised (CP) light and chiral molecules is central to a range of areas, from spectroscopy and imaging to next-generation photonic devices. However, the selectivity in absorption or emission of left-handed versus right-handed CP light is low for many molecular systems. In this perspective, we assess the magnitude of the measured chiroptical response for a variety of chiral systems, ranging from small molecules to large supramolecular assemblies, and highlight the challenges towards enhancing chiroptical activity. We explain the origins of low CP dissymmetry and showcase recent examples in which molecular design, and the modification of light itself, enable larger responses. Our discussion spans spatial extension of the chiral chromophore, manipulation of transition dipole moments, exploitation of forbidden transitions and creation of macroscopic chiral structures; all of which can increase the dissymmetry. Whilst the specific strategy taken to enhance the dissymmetric interaction will depend on the application of interest, these approaches offer hope for the development and advancement of all research fields that involve interactions of chiral molecules and light.

This perspective explores the dissymmetric interaction between circularly polarised (CP) light and chiral molecules. Such interactions are central to many applications from next generation displays to asymmetric photochemical synthesis.     

Synthesis and nonlinear optical properties of novel Y‐type polyurethane containing tricyanovinylthiazole with enhanced thermal stability of second harmonic generation

A novel Y‐type poly[iminocarbonyloxyethyl‐5‐methyl‐4‐{2‐thiazolylazo‐4‐(1,2,2‐tricyanovinyl)}resorcinoxyethyloxycarbonylimino‐(3,3′‐dimethoxy‐4,4′‐biphenylene)] 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute part of the polymer backbone, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It showed a thermal stability up to 250 °C in thermogravimetric analysis thermogram and the glass‐transition temperature (T_g) obtained from differential scanning calorimetry thermogram was around 118 °C. The second harmonic generation coefficient (d₃₃) of poled polymer films at 1560 nm fundamental wavelength was around 8.43 × 10^?9 esu. The dipole alignment exhibited a thermal stability even at 12 °C higher than T_g, and there was no SHG decay below 130 °C due to the partial main‐chain character of the polymer structure, which is acceptable for NLO device applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1166–1172, 2010     

Quadrupole contribution to the third-order optical activity spectroscopy

Time-resolved nonlinear optical activity measurement spectroscopy can be a useful tool for studying biomolecular and chemical reaction dynamics of chiral molecules. Only recently, the two-dimensional (2D) circularly polarized photon echo (CP-PE) spectroscopy of polypeptides and a photosynthetic light-harvesting complex were discussed, where the beam configuration was specifically controlled in such a way to eliminate the quadrupole contribution to the CP-PE signal. In this paper, we generalize the CP-PE spectroscopy by including the transition quadrupole contributions from peptide amide I vibrational transition and chlorophyll electronic transition. By using a density functional theory calculation method, the corresponding amide I vibrational and chlorophyll Q(y) electronic transition quadrupole tensor elements are determined. Amplitude of nonlinear optical transition pathway involving a quadrupole transition is found to be comparable to those of magnetic dipole terms for two different cases considered, i.e., dipeptides and photosynthetic antenna complex. However, due to the rotational averaging factors, the overall quadrupole contribution is an order of magnitude smaller than the magnetic dipole contribution. This suggests that the conventional 2D photon echo method and experimental scheme can be directly used to measure the 2D CP-PE signal from proteins and molecular complexes and that the 2D CP-PE signal is mainly dictated by the magnetic dipole contribution.     

Two-dimensional circularly polarized IR photon echo spectroscopy of polypeptides: four-wave-mixing optical activity measurement

A coherent two-dimensional (2D) optical spectroscopy utilizing circularly polarized (CP) beams, which was shown to be useful in studying molecular chirality in condensed phases, was theoretically proposed recently [Cho et al. J. Chem. Phys. 2003, 119, 7003]. A photon echo (PE) version of 2D optical activity spectroscopy is discussed in this paper. Considering various dipeptide and polypeptide systems, where the amide I local modes constitute the set of basis modes used to describe exciton and biexciton states as linear combinations of those basis modes, we present numerically simulated 2D circularly polarized IR PE spectra. It is shown that this novel spectroscopic method can provide additional information on the angles between the transition magnetic dipole and the transition electric dipole of two different vibrationally excited states, which are highly sensitive to the 3D structure and chirality of a given polypeptide. Also, a hierarchical relation of IR absorption, vibrational circular dichroism, 2D IR PE, and 2D CP-IR PE is discussed to show advantages of 2D optical activity spectroscopy in general.     

KCs2[Pb2Br5(HCOO)2]: A Polar 3D Lead-Bromide Framework Exhibiting Strong Second-Harmonic Generation Response

The discovery of new nonlinear optical (NLO) crystals with excellent properties is in urgently demand because of their ability to generate coherent light. Herein, we report an unique NLO lead bromide formate, KCs₂[Pb₂Br₅ (HCOO)₂], which has been synthesized by a mix-solvothermal method. KCs₂[Pb₂Br₅(HCOO)₂] exhibits strong phase-matching second-harmonic generation (SHG) response (6.5×KDP), large birefringence (0.16@ 1064 nm), and a wide transparent window in most visible light and mid-IR region. Interestingly, KCs₂[Pb₂Br₅(HCOO)₂] features a polar 3D lead-bromide framework in which adjacent Pb−Br layers containing coplanar Pb₆Br₆ rings are not only parallel to each other, but also orient in the same direction. These oriented arrangements are responsible for the strong SHG response and large birefringence that are elucidated by both local dipole moment and theoretical calculations. This research provides a new strategy to explore subsequent NLO crystals.     

Synthesis and properties of novel Y‐type nonlinear optical polyimides with high thermal stability of second harmonic generation

2,4‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐1‐(2,2‐dicyanovinyl)benzene dianhydride (4) was prepared and reacted with 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide and 4,4′‐(hexafluoroisopropylidene)dianiline to yield novel Y‐type polyimides 5‐7 containing 2,4‐dioxybenzylidenemalononitrile groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone. The resulting polyimides 5‐7 are soluble in polar solvents such as dimethylsulfoxide and N,N‐dimethylformamide. Polymers 5‐7 showed a thermal stability up to 330 °C in thermogravimetric analysis thermograms with T_g values obtained from differential scanning calorimetry thermograms in the range 179–194 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm fundamental wavelength were around 5.56 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 20 °C higher than the glass‐transition temperature there was no SHG decay below 215 °C because of the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3078–3087, 2008     

Synthesis, phase transition and photoluminescence studies on Eu-substituted double perovskites—A novel orange-red phosphor for solid-state lighting

Photoluminescence studies on Eu³⁺-doped double perovskites with the formula A₂CaWO₆ (A=Sr, Ba) revealed that the forced electric dipole (ED) transition is present when Eu³⁺ is substituted at the non-centrosymmetric Sr-site vis-a-vis substitution at the centrosymmetric Ca-site shows both ED and magnetic dipole (MD) transition. A series of novel orange-red-emitting phosphor compositions Sr_1.9−xBa_xEu_0.05Li_0.05CaWO₆ (x=0-1.9) have also been synthesized and characterized by powder X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS) and photoluminescence. XRD results reveal a phase transition from monoclinic to pseudo-cubic structure for x?0.2. All the compositions show broad charge transfer band and orange-red (MD and ED) emission. However, the relative intensity of the MD and ED depends on the Ba content present in the host lattice. Select compositions in this system of compounds could find potential application as orange-red phosphors for white light generation using blue/near-UV GaN-based light-emitting diodes (LEDs).     

Chiral Hybrid Germanium(II) Halide with Strong Nonlinear Chiroptical Properties

Due to the pronounced anisotropic response to circularly polarized light, chiral hybrid organic–inorganic metal halides have been regarded as promising candidates for the application in nonlinear chiroptics, especially for the second-harmonic generation circular dichroism (SHG-CD) effect. However, designing novel lead-free chiral hybrid metal halides with large anisotropy factors and high laser-induced damage thresholds (LDT) of SHG-CD remains challenging. Herein, we develop the first chiral hybrid germanium halide, (R/S-NEA)₃Ge₂I₇⋅H₂O (R/S-NGI), and systematically investigated its linear and nonlinear chiroptical properties. S-NGI and R-NGI exhibit large anisotropy factors (g_SHG-CD) of 0.45 and 0.48, respectively, along with a high LDT of 38.46 GW/cm²; these anisotropy factors were the highest values among the reported lead-free chiral hybrid metal halides. Moreover, the effective second-order nonlinear optical coefficient of S-NGI could reach up to 0.86 pm/V, which was 2.9 times higher than that of commercial Y-cut quartz. Our findings facilitate a new avenue toward lead-free chiral hybrid metal halides, and their implementation in nonlinear chiroptical applications.     

手性钙钛矿的结构维度与光电特性

近十年,有机无机杂化钙钛矿凭借其新颖优异的光电特性而引起广泛关注。最近,手性钙钛矿由于结合了钙钛矿材料和手性材料各自独特性能,在三维显示、光学信息处理、量子光学、生物探测、自旋电子等方面具有重要应用价值。根据有机、无机组分的空间分布,可以对手性钙钛矿的结构维度进行分类。本文以手性钙钛矿的不同结构维度为出发点,分别阐述了一维、二维和三维手性钙钛矿的晶体结构、光学和光电特性,包括圆二色性、圆偏振光致发光和光电探测等特性。考虑到二维手性钙钛矿具有独特的范德华层状晶体结构,重点介绍了其与其它二维材料组合成二维异质结构方面的工作。最后,分别从材料制备和器件应用的角度,总结了手性钙钛矿的重点挑战问题和未来发展方向。     

Near-Infrared Circularly Polarized Luminescence through Intramolecular Excimer Formation of Oligo(p-phenyleneethynylene)-Based Double Helicates

Carbon-based double helicates consisting of two anthracene-containing oligo(p-phenyleneethynylene) units and two flexible chiral 1,1′-binaphthyl units or two rigid chiral 9,9′-spirobifluorene units were developed. The curved oligo(p-phenyleneethynylene) fragments in the double helicates were successfully constructed by tin-mediated reductive aromatization. Helical oligo(p-phenyleneethynylene) double strands fixed by two rigid spirobifluorene units showed little structural change under photoirradiation, thereby emitting circularly polarized luminescence (CPL) in the visible region with a high quantum yield (Φ_PL=0.93). In contrast, flexible binaphthyl units induced dynamic structural change of the oligo(p-phenyleneethynylene) luminophores under photoirradiation, leading to strong CPL (|g_lum|=1.1×10⁻²) in the near-infrared (NIR) region. UV/Vis, circular dichroism (CD), CPL and NMR spectroscopic analyses of the binaphthyl-hinged double helicate suggested excimer formation between two π-conjugated strands in the excited state. Theoretical calculations highlight the importance of the tightly interlocked excimer structure of the carbon-based double helicate in controlling the angle between the electric and magnetic transition dipole moments for strong NIR CPL generation.     

Core electron transitions as a probe for molecular chirality: natural circular dichroism at the carbon K-edge of methyloxirane

We have measured for the first time the X-ray natural circular dichroism (XNCD) of a chiral molecule in an isotropic medium. In this condition the only surviving term contributing to CD is the cross product between the electric dipole and the magnetic dipole transition moments. The non-zero value of the magnetic dipole transition moment in a 1s-to-valence electron transition is attributed to contribution of valence states to core molecular orbitals. These results open the way to a "local" chiral molecular analysis and to the study of stereochemically selected photochemical processes.     

Chiral polymer hosts for circularly polarized electroluminescence devices

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications. The fabrication of a CP PLED requires a polymer host that provides the appropriate chiral environment around the emitting dopant. However, chemical strategies for the design of chiral polymer hosts remain underdeveloped. We have developed new polymer hosts for CP PLED applications. These polymers were prepared through a free-radical polymerization of 3-vinylcarbazole with a chiral N-alkyl unit. This chiral unit forces the carbazole repeat units to form mutually helical half-sandwich conformers with preferred (P)-helical sense along the polymer main chain. Electronic circular dichroism measurements demonstrate the occurrence of chirality transfer from chiral monomers to achiral monomers during chain growth. The (P)-helical-sense-enriched polymer interacts diastereoselectively with an enantiomeric pair of new phosphorescent (R)- and (S)-dopants. The magnitude of the Kuhn dissymmetry factor (g_abs) for the (P)-helically-enriched polymer film doped with the (R)-dopant was found to be one order of magnitude higher than that of the film doped with the (S)-dopant. Photoluminescence dissymmetry factors (g_PL) of the order of 10⁻³ were recorded for the doped films, but the magnitude of diastereomeric enhancement decreased to that of g_abs. The chiral polymer host permits faster energy transfer to the phosphorescent dopants than the achiral polymer host. Our photophysical and morphological investigations indicate that the acceleration in the chiral polymer host is due to its longer Förster radius and improved compatibility with the dopants. Finally, multilayer CP PLEDs were fabricated and evaluated. Devices based on the chiral polymer host with the (R)- and (S)-dopants exhibit electroluminescence dissymmetry factors (g_EL) of 1.09 × 10⁻⁴ and −1.02 × 10⁻⁴ at a wavelength of 540 nm, respectively. Although challenges remain in the development of polymer hosts for CP PLEDs, our research demonstrates that chiroptical performances can be amplified by using chiral polymer hosts.

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications.