Novel antimicrobial polyethylene composites prepared by metallocenic in situ polymerization with TiO2‐based nanoparticles

Polyethylene (PE) composites with titanium oxide (TiO₂) nanoparticles were produced via in situ polymerization representing a novel route to obtain antimicrobial polymeric materials. The TiO₂ nanoparticles synthesized by the sol–gel method were used either as‐synthesized or modified organically with hexadecyltrimethoxysilane (Mod‐TiO₂). These particles were added, together with the catalytic system (formed by a metallocenic catalyst and methylaluminoxane as cocatalyst), directly to the reactor, yielding in situ PE composites with 2 and 8 wt % content of nanofiller. The catalytic polymerization activity presented a slight decrease with the incorporation of the TiO₂ and Mod‐TiO₂ nanoparticles compared to polymerization without filler. Regarding the properties of the composites, crystallinity increased slightly when the different nanofillers were added, and the elastic modulus increased around 15% compared to neat PE. PE/TiO₂ nanocomposites containing 8 wt % of TiO₂ exposed to UVA irradiations presented antimicrobial activity against Escherichia coli. The PE/Mod‐TiO₂ nanocomposite with 8 wt % filler killed 99.99% of E. coli, regardless of light and time irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

α-萘基丁二亚胺氯化镍/MAO制备双(宽)峰聚乙烯

合成了一种新型α 二亚胺镍配合物———α 萘基丁二亚胺氯化镍 ,此配合物作为催化剂在MAO的活化下催化乙烯聚合得到支化聚乙烯 ,聚合活性高达 7 18× 10 5gPE molNi·h ,1 3C NMR、FTIR测试结果表明制备的聚乙烯含有末端双键 ;GPC结果表明所制备的聚乙烯分子量呈双 (宽 )峰分布 ,其原因有两个 ,一是此催化剂能产生分子量较低的α 烯烃 ,在聚合过程中一部分α 烯烃会“就地”与乙烯原位共聚形成分子量较高的聚合物 ,二是此催化剂存在立体异构体 ,而不同异构体在MAO活化下形成的活性中心的配位环境不同 ,因而得到的聚乙烯的分子量也不同 .研究了聚合温度、聚合压力、铝镍摩尔比 (nAl nNi)对催化活性、聚乙烯分子量、支化度的影响 .聚乙烯的分子量随聚合温度的升高而下降 ,支化度增大 ,熔点则降低 .     

Enhancing performance of α-diiminonickel precatalyst for ethylene polymerization by substitution with the 2,4-bis(4,4'-dimethoxybenzhydryl)-6-methylphenyl group

High activities in ethylene polymerization predetermine α-diiminonickel precatalysts for potential industrial applications. In our study, we have synthesized and characterized a series of unsymmetrical 1-(2,4-bis(4,4′-dimethoxybenzhydryl)-6-MeC₆H₂N)-2-arylimino-acenaphthylene nickel(II) halides. The single-crystal X-ray diffraction study of representative compounds reveals distorted tetrahedral geometry. On activation with either Me₂AlCl or modified methylaluminoxane, these nickel complexes exhibit high activities of the order of 10⁶ g of PE (mol of Ni)⁻¹ h⁻¹ and produce polyethylene of generic application characterized by high molecular weight, narrow molecular weight distribution, and moderate degree of branching. The substituents at the ligands affect the catalytic performance of the nickel complexes and tune the microstructure of the resultant polyethylene.     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Bulky iminophosphine-based nickel and palladium catalysts bearing 2,6-dibenzhydryl groups for ethylene oligo-/polymerization

A series of 2,6-dibenzhydryl substituted bulky Ni and Pd complexes containing P,N-chelating ligands, {[2,6-(Ph₂CH)₂-4-R-C₆H₂-N=CH-C₆H₄-2-PPh₂]MX₂; MX₂ =NiBr₂; R = Me ( Ni1 ); R = F ( Ni2 ); MX₂ =PdCl₂, R = Me ( Pd1 )}, have been prepared and used as catalyst precursors for ethylene oligo-/polymerization. Compared to the corresponding 2,6-diisopropyl Ni catalyst, these bulky Ni precatalysts activated by Et₂AlCl exhibited excellent catalytic performance toward ethylene polymerization with activity of up to 1.90 × 10⁵ g PE (mol Ni)⁻¹ h⁻¹, and result in semicrystalline PEs with high molecular weight. The catalytic performance of these bulky P,N-type complexes was significantly improved by introducing two ortho-dibenzhydryl on the N-aryl substituents. However, the formation of C₁₀–C₂₄ oligomers were generated using their palladium catalysts through ethylene oligomerization at high temperatures.     

Homopolymerization of Methyl Methacrylate by Novel Ziegler‐Natta‐Type Catalysts Based on Bis(chelate)‐nickel(II) Complexes and Methylaluminoxane

Novel catalytic systems based on bis‐(chelate)nickel(II) precursors, such as bis(α‐nitroacetophenonate)nickel(II) [Ni(naph)₂] and bis(2,6‐diisopropylbenzenesalicylaldiminate)nickel(II) [Ni(dipbs)₂], and methylaluminoxane (MAO) as the cocatalyst were employed for the polymerization of methyl methacrylate (MMA). Reaction parameters were examined. Under proper conditions, the Ni(dipbs)₂/MAO system allowed to obtain poly(MMA) with a very high productivity (TOF up to 70 000 h^–1) and a remarkable syndiospecificity degree (rr > 80%) at room temperature without addition of an ancillary Lewis base.     

Highly branched and high‐molecular‐weight polyethylenes produced by 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC6H2N]‐2‐aryliminoacenaphthylnickel(II) halides

A series of unsymmetrical 1‐[2,6‐bis(bis(4‐fluorophenyl)methyl)‐4‐MeOC₆H₂N]‐2‐aryliminoacenaphthene‐nickel(II) halides has been synthesized and fully characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (¹H NMR), ¹³C NMR, and ¹⁹F NMR spectroscopy as well as elemental analysis. The structures of Ni1 and Ni6 have been confirmed by the single‐crystal X‐ray diffraction. On activation with cocatalysts either ethylaluminum sesquichloride or methylaluminoxane, all the title nickel complexes display high activities toward ethylene polymerization up to 16.14 × 10⁶ g polyethylene (PE) mol^?1(Ni) h^?1 at 30 °C, affording PEs with both high branches (up to 103 branches/1000 carbons) and molecular weight (1.12 × 10⁶ g mol^?1) as well as narrow molecular weight distribution. High branching content of PE can be confirmed by high temperature ¹³C NMR spectroscopy and differential scanning calorimetry. In addition, the PE exhibited remarkable property of thermoplastic elastomers (TPEs) with high tensile strength (σ_b = 21.7 MPa) and elongation at break (ε_b = 937%) as well as elastic recovery (up to 85%), indicating a better alternative to commercial TPEs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 130–145     

PREPARATION OF HIGHLY BRANCHED POLYETHYLENE WITH ACENAPHTHENEDIIMINE NICKEL CHLORIDE/DIETHYLALUMINUM CHLORIDE CATALYST

The homogeneous catalyst system [ArN = C(Nap)- C(Nap)= Nar]NiCl2 (Nap = 1,8-naphthdiyl, Ar = 2,6-diisopropylphenyl)/AlEt2Cl has been prepared and examined for ethylene polymerization. Polymerization conditions such as cocatalyst, Al/Ni molar ratio and polymerization temperature (Tp) have a great effect on catalytic activity and properties of polyethylenes (PE). The activity of 5.1 × 105g PE/mol Ni. H was obtained by the catalyst, activated with AlEt2Cl at 120 of Al/Ni ratio and 30℃. Especially, Tp had a pronounced influence on branches and molecular weight of PE. Branching degree of PE increased with increasing temperature whereas their molecular weight decreased correspondingly. At Tp lower than about 70℃, the resultant PE was an elastic material. When Tp was higher than 70℃, the product was a viscous oil. The resultant PE was confirmed by 13C-NMR to contain significant amounts of not only methyl but also ethyl, propyl, butyl,amyl, and longer branches (longer than six carbons). According to gel permeation chromatographic measurement, the weightaverage molecular weights of the polymers obtained ranged from 3.6 × 103 to 2.3 × 105.     

New chiral α‐diimine nickel(II) complexes bearing ortho‐sec‐phenethyl groups for ethylene polymerization

A series of new α‐diimine nickel(II) catalysts bearing bulky chiral sec‐phenethyl groups have been synthesized and characterized. The molecular structure of representative chiral ligand, bis[N,N′‐(4‐methyl‐2,6‐di‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane rac‐1c and chiral complexes, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2a and bis{bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2b, were confirmed by X‐ray crystallographic analysis. Complex rac‐2c bearing two chiral sec‐phenethyl groups in the ortho‐aryl position and a methyl group in the para‐aryl position, activated by diethylaluminum chloride (DEAC), showed highly catalytic activity for the polymerization of ethylene [4.12 × 10⁶ g PE (mol Ni.h.bar)^?1], and produced highly branched polyethylenes under low ethylene pressure (branching degree: 104, 118 and 126 branches/1000 C at 20, 40 and 60°C, respectively). Chiral 20‐electron bis‐α‐diimine Ni(II) complex rac‐2b also exhibited high activity toward ethylene polymerization [1.71 × 10⁶ g PE (mol Ni · h · bar)^?1]. The type and amount of branches of the polyethylenes obtained were determined by ¹H and ¹³C NMR. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel nickel(II) and copper(II) complexes with phenoxy-imidazole ligands: Syntheses, crystal structures and norbornene addition polymerization

The novel nickel(II) (1) and copper(II) (2) complexes bearing 2′-(4′,6′-di-tert-butylhydroxy-phenyl)-1,4,5-triphenyl imidazole ligand have been synthesized and characterized. The molecular structure analyses of complexes 1 and 2 indicated that Ni(II) centre in 1 adopts a distorted tetrahedral coordination geometry with a dihedral angle of 85.2° between Ni(1)O(1)N(1) plane and Ni(1)O(1A)N(1A) plane, while the Cu(II) centre in 2 represents a distorted square planar coordination geometry with a cis-N₂O₂ arrangement of the donor atoms, the dihedral angle being 32° between Cu(1)O(1)N(1) plane and Cu(1)O(1A)N(1A) plane. After activation with methylaluminoxane (MAO), both Ni(II) and Cu(II) complexes can be used as catalysts for the addition polymerization of norbornene (NB). The polynorbornenes (PNBs) are produced with very high polymerization activity (10⁸ g PNB mol⁻¹ Ni h⁻¹) for Ni(II) complex and moderate catalytic activity (10⁵ g PNB mol⁻¹ Cu h⁻¹) for Cu(II) complex, respectively. The high molecular weight polynorbornenes (10⁶) are obtained for complexes 1 and 2. Moreover, the distinct effects of polymerization temperature and Al/M ratio on catalytic activities and molecular weights of polymers are discussed.     

Thermally Robust yet Deconstructable and Chemically Recyclable High-Density Polyethylene (HDPE)-Like Materials Based on Si−O Bonds

Polyethylene (PE) is the most widely produced synthetic polymer. By installing chemically cleavable bonds into the backbone of PE, it is possible to produce chemically deconstructable PE derivatives; to date, however, such designs have primarily relied on carbonyl- and olefin-related functional groups. Bifunctional silyl ethers (BSEs; SiR₂(OR′₂)) could expand the functional scope of PE mimics as they possess strong Si−O bonds and facile chemical tunability. Here, we report BSE-containing high-density polyethylene (HDPE)-like materials synthesized through a one-pot catalytic ring-opening metathesis polymerization (ROMP) and hydrogenation sequence. The crystallinity of these materials can be adjusted by varying the BSE concentration or the steric bulk of the Si-substituents, providing handles to control thermomechanical properties. Two methods for chemical recycling of HDPE mimics are introduced, including a circular approach that leverages acid-catalyzed Si−O bond exchange with 1-propanol. Additionally, despite the fact that the starting HDPE mimics were synthesized by chain-growth polymerization (ROMP), we show that it is possible to recover the molar mass and dispersity of recycled HDPE products using step-growth Si−O bond formation or exchange, generating high molecular weight recycled HDPE products with mechanical properties similar to commercial HDPE.     

1‐(2,6‐dibenzhydryl‐4‐fluorophenylimino)‐2‐aryliminoacenaphthylylnickel halides highly polymerizing ethylene for the polyethylenes with high branches and molecular weights

A series of 1‐(2,6‐dibenzhydryl‐4‐fluorophenylimino)‐ 2‐aryliminoacenaphthylene derivatives ( L1–L5 ) and their halonickel complexes LNiX₂ (X = Br, Ni1–Ni5 ; X = Cl, Ni6–Ni10 ) are synthesized and well characterized. The molecular structures of representative complexes Ni2 and Ni4 are confirmed as the distorted tetrahedron geometry around nickel atom by the single crystal X‐ray diffraction. Upon activation with methylaluminoxane, all nickel complexes show high activities up to 1.49 × 10⁷ g of PE (mol of Ni)^?1 h^?1 toward ethylene polymerization, producing polyethylenes with high branches and molecular weights up to 1.62 × 10⁶ g mol^?1 as well as narrow polydispersity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1369–1378     

Highly active new α-diimine nickel catalyst for the polymerization of α-olefins

A new silylated α-diimine ligand, bis[N,N′-(4-tert-butyl-diphenylsilyl-2,6-diisopropylphenyl)imino]acenaphthene 3, and its corresponding Ni(II) complex, {bis[N,N′-(4-tert-butyl-diphenylsilyl-2,6-diisopropylphenyl)imino]acenaphthene}dibromonickel 4, have been synthesized and characterized. The crystal structures of 3 and 4 were determined by X-ray crystallography. In the solid state, complex 4 is a dimer with two bridging Br ligands linking the two nickel centers, which have square pyramidal geometries. Complex 4, activated either by diethylaluminum chloride (DEAC) or methylaluminoxane (MAO) produces very active catalyst systems for the polymerization of ethylene and moderately active for the polymerization of propylene. The activity values are in the order of magnitude of 10⁷ g PE (mol Ni [E] h)⁻¹ for the polymerization of ethylene and of 10⁵ g PP (mol Ni [P] h)⁻¹ for the polymerization of propylene. NMR analysis shows that branched polyethylenes (PE) are obtained at room or higher temperatures and almost linear PE is obtained at 0 °C with 4/DEAC.     

Addition polymerization of norbornene using bis(β‐ketoamino)nickel(II)/tris(pentafluorophenyl)borane catalytic systems

Norbornene polymerizations proceeded in toluene with bis(β‐ketoamino)nickel(II) {Ni[CH₃C(O)CHC(NR)CH₃]₂ [R = phenyl ( 1 ) or naphthyl ( 2 )]} complexes as the catalyst precursors and the organo‐Lewis compound tris(pentafluorophenyl)borane [B(C₆F₅)₃] as a unique cocatalyst. The polymerization conditions, such as the cocatalyst/catalyst ratio (B/Ni), catalyst concentration, monomer/catalyst ratio (norbornene/Ni), polymerization temperature, and polymerization time, were studied in detail. Both bis(β‐ketoamino)nickel(II)/B(C₆F₅)₃ catalytic systems showed noticeably high conversions and activities. The polymerization activities were up to 3.64 × 10⁷ g of polymer/mol of Ni h for complex 1 /(B(C₆F₅)₃ and 3.80 × 10⁷ g of polymer/mol of Ni h for complex 2 /B(C₆F₅)₃, and very high conversions of 90–95% were maintained; both polymerizations provided high‐molecular‐weight polynorbornenes with molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) of 2.5–3.0. The achieved polynorbornenes were confirmed to be vinyl‐addition and atactic polymers through the analysis of Fourier transform infrared, ¹H NMR, and ¹³C NMR spectra, and the thermogravimetric analysis results showed that the polynorbornenes exhibited good thermal stability (decomposition temperature > 410 °C). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4733–4743, 2007     

Metallacyclic mechanism of the addition polymerization of norbornene involving Ni(I) and Ni(III) complexes

The catalytic system Ni(COD)₂/BF₃·OEt₂ is highly active in the addition polymerization of nor-bornene (NB). Its activity, which is up to 1930 (kg NB) (mol Ni)⁻¹ h⁻¹, is higher than the activity of the other known nickel complex catalysts. Another advantage of this system over the latter is that it contains a smaller proportion of a Lewis acid (5 molar parts or below) and no conventional stabilizing organoelement ligands. The activity of this system in NB polymerization has been investigated by Fourier-transform IR spectroscopy. According to EPR data, NB polymerization is accompanied by the formation of low-spin complexes of trivalent nickel, which result from the oxidative addition of the monomer to univalent nickel complexes. A metallacyclic mechanism involving Ni(I) and Ni(III) complexes is suggested for NB polymerization.     

Oxidation of polyethylene surface by corona discharge and the subsequent graft polymerization

Oxidation of a polyethylene (PE) surface by corona discharge and the subsequent graft polymerization of acrylamide (AAm) were studied. The maximum amount of peroxides introduced by corona treatment at a voltage of 15 kV was about 2.3 × 10^?9 mol cm^?2. The decomposition rate of peroxide and the dependence of graft amount on the storage period of the corona-treated PE films showed that there were several kinds of peroxides, the labile one being mainly responsible for the initiation of graft polymerization. When the corona-treated film was brought into contact with a deaerated aqueous solution of AAm, graft polymerization took place more strongly with the treatment time, but was reduced after passing a maximum. Although the x-ray photoelectron spectroscopic analyses of the corona-treated PE films showed homogeneous oxidation of the outer polymer surface by corona discharge, optical microscopy on the cross section of the grafted film revealed the graft polymerization to be limited to a very thin surface region.     

Synthesis of highly branched polyethylene using para‐phenyl‐substituted α‐diimine nickel catalysts

A series of para‐phenyl‐substituted α‐diimine nickel complexes, [(2,6‐R₂‐4‐PhC₆H₂N═C(Me))₂]NiBr₂ (R = ⁱPr ( 1 ); R = Et ( 2 ); R = Me ( 3 ); R = H ( 4 )), were synthesized and characterized. These complexes with systematically varied ligand sterics were used as precatalysts for ethylene polymerization in combination with methylaluminoxane. The results indicated the possibility of catalytic activity, molecular weight and polymer microstructure control through catalyst structures and polymerization temperature. Interestingly, it is possible to tune the catalytic activities ((0.30–2.56) × 10⁶ g (mol Ni·h)^?1), polymer molecular weights (M_n = (2.1–28.6) × 10⁴ g mol^?1) and branching densities (71–143/1000 C) over a very wide range. The polyethylene branching densities decreased with increasing bulkiness of ligand and decreasing polymerization temperature. Specifically, methyl‐substituted complex 3 showed high activities and produced highly branched amorphous polyethylene (up to 143 branches per 1000 C).     

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.     

The vapor phase tert-Butylation of anisole with tert-butanol reaction over nickel mesoporous catalysts

Nickel mesoporous materials with different Si/Ni ratios = 85, 55, 15 have been synthesized by intercalating kanemite using cetyltrimethylammonium bromide (CTMABr) as the intercalating agent and nickel nitrate as the nickel source. The resulting samples were characterized by means of inductively coupled plasma (ICP) technique, XRD, BET and a temperature-programmed-desorption (TPD) of pyridine. The effect of the Si/Ni molar ratio on the textural properties of Ni-FSM-16 was investigated. The results reveal that the Ni-FSM-16 samples were successfully synthesized. The catalytic performance was examined in the vapor phase tert-butylation of anisole with tert-butanol at the temperatures between 423 and 523 K under atmospheric pressure. The results indicate that the sample Ni-FSM-16 (15) was more active than other catalysts of this series. The major products of alkylation were 4-tert-butyl anisole (4-TBA), 2-tert-butyl anisole (2-TBA), and 2,4 di-tert-butyl-anisole (2,4-DTBA). The maximum conversion of anisole is observed at 473 K and it decreased further with increasing temperature. The influence of molar ratio, temperature, weight hourly space velocity (WHSV) and time on stream on the selectivity of products was investigated and the results are discussed.     

Two bis-[1-(aryliminomethyleny)-2-oxy-naphthalen] nickel catalysts for the polymerization of methyl methacrylate

Two bis-(1-arylliminomethylenyl-2-oxy-naphthalen) nickel complexes (aryl = 2-methylphenyl, complex 1; aryl = 2,6-diisoproylphenyl, complex 2) were reacted with alkylaluminium in presence of equimolar PPh₃ and tested as catalysts in methyl methacrylate (MMA) polymerization. The two nickel catalysts can initiate polymerization of MMA with good to high activity, the highest activity reaching 1.1 × 10⁵ g PMMA/(mol Ni · h) by less bulky complex 1 at 0.8 mol/L of MMA, 400 of Al/Ni ratio and 0 °C. In addition, the structures of nickel complexes and polymerization conditions, such as monomer concentration, polymerization temperature and Al/Ni molar ratio on catalytic activity of polymerization have great influences on catalytic activity and product properties.