Bistabilities in 1,3,2-dithiazolyl radicals

New synthetic methods for heterocyclic 1,3,2-dithiazolyl (DTA) radicals have been developed, and trends in the molecular spin distributions and electrochemical properties of a series of DTA radicals are reported. The crystal structures of [1,2,5]thiadiazolo[3,4-f][1,3,2]benzodithiazol-2-yl (TBDTA) and [1,3,2]pyrazinodithiazol-2-yl (PDTA) have been determined. The structure of TBDTA (at 293 and 95 K) contains two molecules in the asymmetric unit, each of which generates pi-stacked arrays, one consisting of antiparallel chains of centrosymmetrically associated dimers, the other comprising parallel chains of unassociated radicals. The structure of PDTA (at 293 and 95 K) is simpler, consisting of slipped stacks of pi-dimers. Variable-temperature magnetic susceptibility (chi(P)) measurements on TBDTA indicate essentially paramagnetic behavior for the unassociated radical pi-stacks over the range 5-400 K. By contrast PDTA is diamagnetic at all temperatures below 300 K, but between 300 and 350 K the value of chi(P) follows a sharp and well-defined hysteresis loop, with T(C) downward arrow = 297 K and T(C) upward arrow = 343 K. These features are symptomatic of a regime of bistability involving the observed low temperature pi-dimer structure and a putative high-temperature radical pi-stack. A mechanism for the interconversion of the two phases of PDTA and related structures is proposed in which hysteretic behavior arises from cooperative effects associated with the breaking and making of a lattice-wide network of intermolecular S- - -N' and/or S- - -S' interactions.     

Iron(III) spin-crossover compounds with a wide apparent thermal hysteresis around room temperature.

The magnetic properties of the spin-crossover compounds, [Fe(qsal)2]NCSe-MeOH (1) and [Fe(qsal)2]NCSe-CH2Cl2 (2), have been measured. We have discovered that both compounds 1 and 2 exhibit a wide thermal hysteresis loop of 140 K (T(1/2) upward arrow = 352 K and T(1/2) downward arrow = 212 K) and 180 K (T(1/2) upward arrow = 392 K and T(1/2) downward arrow = 212 K), respectively, in the first cycle. Thermogravimetric analysis shows that solvent molecules escape from compounds 1 and 2 around 340 and 395 K, respectively. This means that the hysteresis loops observed for the first cycle are only apparent ones. Following the first loop, they show a two-step spin-crossover in warming mode. The so-called "step 1" and "step 2" are centered around T(1/2(S1)) upward arrow = 215 K and T(1/2(S2)) upward arrow = 282 K, respectively. On the other hand, a one-step spin-crossover occurs at T(1/2) downward arrow = 212 K in cooling mode. The hysteresis widths can be estimated to be 3 K (step 1) and 70 K (step 2), assuming that the widths in steps 1 and 2 are defined as the differences between T(1/2(S1)) upward arrow and T(1/2) downward arrow, and T(1/2(S2)) upward arrow and T(1/2) downward arrow, respectively. The hysteresis width of 70 K in step 2 is one of the widest values reported so far for spin-crossover complexes. It is thought that the cooperativity operating in the complexes arises mainly from the intermolecular pi interactions between quinoline and phenyl rings. Using a previously reported model, we are able to simulate the hysteresis loop with a two-step spin-crossover in warming mode and a one-step transition in cooling mode.     

Spin-crossover behavior in cyanide-bridged iron(II)-gold(I) bimetallic 2D Hofmann-like metal-organic frameworks

The synthesis and characterization of new two-dimensional (2D) cyanide-bridged iron(II)-gold(I) bimetallic coordination polymers formulated, {Fe(3-Xpy)2[Au(CN)2]2} (py = pyridine; X = F (1), Cl (2), Br (3), and I (4)) and the clathrate derivative {Fe(3-Ipy)2[Au(CN)2]2}.1/2(3-Ipy) (5), are reported. The iron(II) ion lies in pseudoctahedral [FeN6] sites defined by four [Au(CN)2](-) bridging ligands and two 3-Xpy ligands occupying the equatorial and axial positions, respectively. Although only compounds 2 and 4 can be considered strictly isostructurals, all of the components of this family are made up of parallel stacks of corrugated {Fe[Au(CN)2]2}n grids. The grids are formed by edge sharing of {Fe4[Au(CN)2]4} pseudosquare moieties. The stacks are constituted of double layers sustained by short aurophilic contacts ranging from 3.016(2) to 3.1580(8) A. The Au...Au distances between consecutive double layers are in the range of 5.9562(9)-8.790(2) A. Compound 5, considered a clathrate derivative of 4, includes one-half of a 3-Ipy molecule per iron(II) atom between the double layers. Compound 1 undergoes a half-spin transition with critical temperatures Tc downward arrow = 140 K and Tc upward arrow = 145 K. The corresponding thermodynamic parameters derived from differential scanning calorimetry (DSC) are Delta H = 9.8 +/- 0.4 kJ mol(-1) and Delta S = 68.2 +/- 3 J K mol(-1). This spin transition is accompanied by a crystallographic phase transition from the monoclinic P2(1)/c space group to the triclinic P1 space group. At high temperatures, where 1 is 100% high-spin, there is only one crystallographically independent iron(II) site. In contrast, the low temperature structural analysis shows the occurrence of two crystallographically independent iron(II) sites with equal population, one high-spin and the other low-spin. Furthermore, 1 undergoes a complete two-step spin transition at pressures as high as 0.26 GPa. Compounds 2- 4 are high-spin iron(II) complexes according to their magnetic and [FeN6] structural characteristics. Compound 5, characterized for having two different iron(II) sites, displays a two-step spin transition with critical temperatures of Tc(1) = 155 K, Tc(2) downward arrow = 97 K, and Tc(2) upward arrow = 110 K. This change of spin state takes place in both sites simultaneously. All of these results are compared and discussed in the context of other {Fe(L) x [M(I)(CN)2]} coordination polymers, particularly those belonging to the homologous compounds {Fe(3-Xpy)2[Ag(CN)2]2} and their corresponding clathrate derivatives.     

Two-dimensional iron(II) spin crossover complex constructed of bifurcated NH...O- hydrogen bonds and pi-pi interactions: [FeII(HLH,Me)2](ClO4)2.1.5MeCN (HLH,Me = imidazol-4-yl-methylidene-8-amino-2-methylquinoline)

A 2D iron(II) spin crossover complex, [FeII(HLH,Me)2](ClO4)2.1.5MeCN (1), was synthesized, where HLH,Me = imidazol-4-yl-methylidene-8-amino-2-methylquinoline. 1 showed a gradual spin transition between the HS (S = 2) and LS (S = 0) states from 180 to 325 K within the first warming run from 5 to 350 K, in which 1.5MeCN is removed, and there was an abrupt spin transition at T1/2 downward arrow = 174 K in the first cooling run from 350 to 5 K. Following the first cycle, the compound showed an abrupt spin transition at T1/2 upward arrow = 185 K and T1/2 downward arrow = 174 K with 11 K wide hysteresis in the second cycle. The crystal structures of 1 were determined at 296 (an intermediate between the HS and LS states) and 150 K (LS state). The structure consists of a 2D extended structure constructed of both the bifurcated NH...O- hydrogen bonds between two ClO4- ions and two neighboring imidazole NH groups of the [FeII(HLH,Me)2]2+ cations and the pi-pi interactions between the two quinolyl rings of the two adjacent cations. Thermogravimetric analysis showed that solvent molecules are gradually eliminated even at room temperature and completely removed at 369 K. Desolvated complex 1' showed an abrupt spin transition at T1/2 upward arrow = 180 K and T1/2 downward arrow = 174 K with 6 K wide hysteresis.     

1-D cobalt(II) spin transition compound with strong interchain interaction: [Co(pyterpy)Cl(2)].X

Cobalt(II) compounds [Co(pyterpy)Cl(2)].MeOH (1.(MeOH)) and [Co(pyterpy)Cl(2)].2H(2)O (1.(2H(2)O)) were synthesized. The compound 1.(MeOH) forms the quasi 3-D networks by making pi-pi stacking between the 1-D chains. The methanol molecules from 1.(MeOH) can be removed by heating, and substituted by absorption of water molecules. The MeOH molecules in 1.(MeOH) are removed by heating at 410 K, and they are substituted by water molecules to form 1.(2H(2)O). 1.(2H(2)O) exhibits a S = (3)/(2) (HS) left arrow over right arrow S = (1)/(2) (LS) spin transition with a thermal hysteresis. We have succeeded in constructing a guest dependent 1-D spin-crossover cobalt(II) compound.     

The unexpected desulfurization of 4-aminothiophenols

Thermolysis of 4-aminophenyl benzyl sulfide at 523 K in the hydrogen donor solvent (HDS), 9,10-dihydroanthracene (AnH2), gave 4-aminothiophenol and toluene as the predominant products of the homolytic S-C bond cleavage. Under these conditions, a portion of the 4-aminothiophenol was desulfurized to aniline with first-order kinetics and with a rate constant estimated by kinetic modeling to be 7.0x10(-6) s-1. Starting with 4-NH2C6H4SH at 523 K, it was found that sulfur loss was more efficient in the non-HDSs, anthracene and hexadecane, than in AnH2. Under similar (competitive) reaction conditions, YC6H4SHs with Y=H, 4-CN, and 3-CF3 were completely inert; with Y=4-CH3O, there was some very minor desulfurization, whereas with Y=4-N(CH3)2 and 4-N(CH3)(H), the sulfur extrusions were as fast as that for Y=4-NH2. We tentatively suggest that this apparently novel reaction is a chain process initiated by the bimolecular formation of diatomic sulfur, S2, followed by a reversible addition of ground state, triplet 3S2 to the thiol sulfur atom, 4-NH2C6H4S upward arrow(SS upward arrow)H, and insertion into the S-H bond, 4-NH2C6H4SSSH. In a cascade of reactions, aniline and S8 are formed with the chains being terminated by reaction of 4-NH2C6H4S upward arrow(SS upward arrow)H with 4-NH2C6H4SH. Such a reaction mechanism is consistent with the first-order kinetics. That this reaction is primarily observed with 4-YC6H4SH having Y=N(CH3)2, N(CH3)(H), and NH2 is attributed to the fact that these compounds can exist as zwitterions.     

Kinetics of Dissociation of Iron(III) Complexes of Tiron in Aqueous Acid

The kinetics of dissociation of the mono, bis, and tris complexes of Tiron (1,2-dihydroxy-3,5-benzenedisulfonate) have been studied in acidic aqueous solutions in 1.0 M HClO(4)/NaClO(4), as a function of [H(+)] and temperature. In general, the kinetics can be explained by two reactions, (H(2)O)Fe(L)(n)(-1) + H(2)L right arrow over left arrow (H(2)O)Fe(L(n)H) + H(+) (k(n), k(-n)) and (HO)Fe(L)(n)(-1) + H(2)L right arrow over left arrow (H(2)O)Fe(L(n)H) (k(n)', k(-n)'), a rapid equilibrium, (H(2)O)Fe(L(n)H) right arrow over left arrow (H(2)O)Fe(L)(n) + H(+) (K(cn)), and the formation constant (H(2)O)Fe(L)(n)(-1) + H(2)L right arrow over left arrow (H(2)O)Fe(L)(n) + 2H(+). For n = 1, the reaction was observed at 670 nm, and at [H(+)] of 0.05-0.5 M at temperatures of 2.0, 14.0, 25.0, and 36.7 degrees C. For n = 2, the analogous conditions are 562 nm, at [H(+)] of 1.5 x 10(-3) to 1.4 x 10(-2) M at temperatures of 2.0, 9.0, and 14.0 degrees C. For n = 3, the conditions are 482 nm, at pH 4.5-5.7 in 0.02 M acetate buffer at temperatures of 1.8, 8.0, and 14.5 degrees C. The rate or equilibrium constants (25 degrees C) with DeltaH or DeltaH degrees (kcal mol(-1)) and DeltaS or DeltaS degrees (cal mol(-1) K(-1)) in brackets are as follows: for n = 1, k(1) = 2.3 M(-1) s(-1) (8.9, -27.1), k(-1) = 1.18 M(-1) s(-1) (4.04, -44.8), K(c1) = 0.96 M (-9.99, -33.6), K(f1) = 2.01 M (-5.14, -15.85); for n = 2, k(-2)/K(c2) = 1.9 x 10(7) (19.9, 41.5) and k(-2)'/K(c2) = 1.85 x 10(3) (1.4, -38.8) and a lower limit of K(c2) > 0.015 M; for n = 3, k(3) = 7.7 x 10(3) (15.8, 12.3), k(-3) = 1.7 x 10(7) (16.2, 28.9), K(c3) = 7.4 x 10(-5) M (4.1, -5.1), and K(f3) = 3.35 x 10(-8) (3.7, -21.7). From the variations in rate constants and activation parameters, it is suggested that the Fe(L)(2) and Fe(L)(3) complexes undergo substitution by dissociative activation, promoted by the catecholate ligands.     

Equilibrium constants from spectrophotometric data: dimer formation in gaseous Br2

The equilibrium constant for the dimerization reaction, 2Br 2(g) right arrow over left arrow Br 4(g), is estimated using the classic spectrophotometric method with precise data and a multiwavelength fitting approach. The analysis is very sensitive to small errors in the data, requiring that parameters for the baseline absorption be included at each wavelength. To that end spectra for 18 Br 2 pressures in the range 6-119 Torr are augmented by six baseline scans to facilitate estimation of three baseline constants and two molar absorptivities at each wavelength, yielding K c = 2.5 +/- 0.4 L/mol at 22 degrees C. This value is more than double the only previous estimate, which was based on analysis of PVT data. With adoption of a literature estimate of Delta H degrees = -9.5 kJ/mol, the new K implies Delta S degrees = -51 J mol (-1) K (-1) (ideal gas, 1 bar reference). The spectra for monomer absorption (peak 227 nm) and dimer absorption (205 nm) are obtained with unprecedented precision.     

Higher energy states in the CO dimer: millimeter-wave spectra and rovibrational calculations

New extensive millimeter-wave measurements of the 12C16O dimer have been made, and more than 300 new spectral transitions have been observed in the frequency range 81-135 GHz. A joint analysis of these and previous millimeter-wave data yielded the precise location of 33 new energy levels of A+ symmetry and 20 levels of A- symmetry. These energy levels are located at 8-18 cm(-1) above the zero-point level. Some of them belong to already known stacks, and others make up 9 new stacks of the dimer. Newly determined stacks have K=0, 1, and, for the first time, 2, where K is the projection of the total angular momentum on the intermolecular axis. The energy levels from accompanying rovibrational calculations with the use of a recently developed hybrid CCSD(T)/DFT-SAPT potential are in very good agreement with experiment. Analysis of the calculated wave functions revealed that two new stacks of A+ symmetry with K=2 correspond to overall rotation of the dimer while the other newly observed stacks belong to the geared bend overtone modes. The ground vibrational states of the two "isomers" found are more or less localized at the two minima in the potential surface, whereas all the geared bend excited states show a considerable amount of delocalization.     

Cooperative Iron(II) spin crossover complexes with N4O2 coordination sphere

Two new spin crossover complexes [FeL(py)(2)] (1) and [FeL(DMAP)(2)] (2) with L being a tetradentate N(2)O(2)(2-) coordinating Schiff-base-like ligand [([3,3']-[1,2-phenylenebis(iminomethylidyne)]bis(2,4-pentanedionato)(2-)-N,N',O(2),O(2)'], py = pyridine and DMAP = p-dimethylaminopyridine have been investigated using temperature-dependent susceptibility and thermogravimetric and photomagnetic measurements as well as M?ssbauer spectroscopy and X-ray structure analysis. Both complexes show a cooperative spin transition with an approximately 9 K wide thermal hysteresis loop in the case of 2 (T(1/2) upward arrow = 183 K and T(1/2) downward arrow = 174 K) and an approximately 2 K wide thermal hysteresis loop in the case of the pyridine diadduct 1 (T(1/2) upward arrow = 191 K and T(1/2) downward arrow = 189 K). The spin transition was additionally followed by different temperature-scanning calorimetry and M?ssbauer spectroscopy for 2, and a good agreement for the transition temperatures obtained with the different methods was found. Results from X-ray structure analysis indicate that the cooperative interactions are due to elastic interactions in both compounds. They are more pronounced in the case of 2 with very short intermolecular iron-iron distances of 7.2 A and several intense C-C contacts. The change of the spin state at the iron center is accompanied by a change of the O-Fe-O angle, the so-called bit of the equatorial ligand, from 108 degrees in the high-spin state to 90 degrees in the low-spin state. The reflectivity measurements of both compounds give at low temperature indication that at the sample surface the light-induced excited spin state trapping (LIESST) effect occurs. In bulk condition using a SQUID magnetometer the complex 2 displays some photomagnetic properties with an photoexcitation level of 60% and a T(LIESST) value of 53 K.     

Potentiometric determination of aminal stability constants

Potentiometric titration was used to determine the logarithms of the stepwise equilibrium constants for the species formed between morpholine and formaldehyde in aqueous solution, ionic strength 0.5 and 2.5M (KCl) at 25 degrees C. The instrumental and computational techniques developed for metal-ligand stability constant determination were applied. Formaldehyde is equivalent to the metal-ion and is represented by M while neutral morpholine is equivalent to the ligand and is represented by L. The stability constants of the following equilibria were determined by non-linear regression (figures in parentheses are at ionic strength 2.5 M KCl): M + L left arrow over right arrow ML (hemi-aminal) logK(1) = 2.90 +/- 0.02 (2.980 +/- 0.004); ML + L left arrow over right arrow ML(2) (bis-aminal); log K(2) = 1.3 +/- 0.2 (1.41 +/- 0.07); MLH left arrow over right arrow ML + H(+) (protonated hemi-aminal) pK(a) = 5.87 +/- 0.01 (6.411 +/- 0.005); ML(2)H left arrow over right arrow ML(2) + H(+) (protonated bis-aminal) pK(a) = (7.6 +/- 0.2). the pK(a) of the protonated bis-aminal could only be determined at the higher ionic strength. The results are in good agreement with reported values determined using the classic formol titration. The automated titration system acquired the full time course of the pH change upon each titrant addition allowing a kinetic analysis to be performed as well as an equilibrium analysis. The forward and reverse rate constants for M + L left arrow over right arrow ML were 0.77M(-1) sec(-1) and 8.1 x 10(-4) sec(-1). respectively.     

Spin transition at the mesophase transition temperature in a cobalt(II) compound with branched alkyl chains

A cobalt(II) compound, [Co(C5C12C10-terpy)2](BF4)2 [C5C12C10-terpy = 4',5' '-decyl-1' '-(heptadecyloxy)-2,2':6',2' '-terpyridine] with branched alkyl chains, based on a terpyridine frame, was synthesized. The cobalt(II) compound exhibits a spin transition between low-spin and high-spin with a thermal hysteresis loop (T(1/2) upward arrow = 288 K and T(1/2) downward arrow = 284 K) at the liquid-crystal transition temperature. It is the first example in the cobalt(II) compounds in which the spin transition occurs at the crystal-liquid crystal transition temperature.     

Intermolecular electron-transfer mechanisms via quantitative structures and ion-pair equilibria for self-exchange of anionic (dinitrobenzenide) donors

Definitive X-ray structures of "separated" versus "contact" ion pairs, together with their spectral (UV-NIR, ESR) characterizations, provide the quantitative basis for evaluating the complex equilibria and intrinsic (self-exchange) electron-transfer rates for the potassium salts of p-dinitrobenzene radical anion (DNB(-)). Three principal types of ion pairs, K(L)(+)DNB(-), are designated as Classes S, M, and C via the specific ligation of K(+) with different macrocyclic polyether ligands (L). For Class S, the self-exchange rate constant for the separated ion pair (SIP) is essentially the same as that of the "free" anion, and we conclude that dinitrobenzenide reactivity is unaffected when the interionic distance in the separated ion pair is r(SIP) > or =6 Angstroms. For Class M, the dynamic equilibrium between the contact ion pair (with r(CIP) = 2.7 Angstroms) and its separated ion pair is quantitatively evaluated, and the rather minor fraction of SIP is nonetheless the principal contributor to the overall electron-transfer kinetics. For Class C, the SIP rate is limited by the slow rate of CIP right arrow over left arrow SIP interconversion, and the self-exchange proceeds via the contact ion pair by default. Theoretically, the electron-transfer rate constant for the separated ion pair is well-accommodated by the Marcus/Sutin two-state formulation when the precursor in Scheme 2 is identified as the "separated" inner-sphere complex (IS(SIP)) of cofacial DNB(-)/DNB dyads. By contrast, the significantly slower rate of self-exchange via the contact ion pair requires an associative mechanism (Scheme 3) in which the electron-transfer rate is strongly governed by cationic mobility of K(L)(+) within the "contact" precursor complex (IS(CIP)) according to the kinetics in Scheme 4.     

Polymorphism in Spin Transition Systems. Crystal Structure, Magnetic Properties, and Mössbauer Spectroscopy of Three Polymorphic Modifications of [Fe(DPPA)(NCS)(2)] [DPPA = (3-Aminopropyl)bis(2-pyridylmethyl)amine

Three polymorphic modifications A-C of [Fe(II)(DPPA)(NCS)(2)], where DPPA = (3-aminopropyl)bis(2-pyridylmethyl)amine is a new tetradentate ligand, have been synthesized, and their structures, magnetic properties, and M?ssbauer spectra have been investigated. For polymorph A, variable-temperature magnetic susceptibility measurements as well as M?ssbauer spectroscopy have revealed the occurrence of a rather gradual HS if LS transition without hysteresis, centered at about 176 K. The same methods have shown that polymorph B is paramagnetic over the temperature range 4.5-295 K, whereas polymorph C exhibits a very abrupt S = 2 if S = 0 transition with a hysteresis. The hysteresis width is 8 K, the transitions being centered at T(c) downward arrow = 112 K for decreasing and T(c) upward arrow = 120 K for increasing temperatures. The crystal structures of the three polymorphs have been solved by X-ray diffraction at 298 K. Polymorph A is triclinic, space group P&onemacr; with Z = 2, a = 8.710(2) ?, b = 15.645(2) ?, c = 7.985(1) ?, alpha = 101.57(1) degrees, beta = 112.59(2) degrees, and gamma = 82.68(2) degrees. Polymorph B is monoclinic, space group P2(1)/c with Z = 4, a = 8.936(2) ?, b = 16.855(4) ?, c = 13.645(3) ?, and beta = 97.78(2) degrees. Polymorph C is orthorhombic, space group Pbca with Z = 8, a = 8.449(2) ?, b = 14.239(2) ?, and c = 33.463(5) ?. In the three polymorphs, the asymmetric units are almost identical and consist of one chiral complex molecule with the same configuration and conformation. The distorted [FeN(6)] octahedron is formed by four nitrogen atoms belonging to DPPA and two provided by the cis thiocyanate groups. The two pyridine rings of DPPA are in fac positions. The main differences between the structures of the three polymorphs are found in their crystal packing. The stabilization of the high-spin ground state of polymorph B is tentatively explained by the presence of two centers of steric strain in the crystal lattice resulting in the elongation of the Fe-N(aromatic) distance. The observed hysteresis in polymorph C seems to be due to the existence of an array of intermolecular contacts in the crystal lattice making the spin transition more cooperative than in polymorph A.     

Structural phase transition driven by spin-lattice interaction in a quasi-one-dimensional spin system of [1-(4'-iodobenzyl)pyridinium][Ni(mnt)2

Crystal structures and magnetic properties were determined for two novel compounds, [1-(4'-iodobenzyl)pyridinium][M(mnt)2] (mnt2- = maleonitriledithiolate; M = Ni (1) or Cu (2)). At room temperature, single crystals of 1 and 2 were isostructural, featuring the formation of segregated columnar structures with regular stacks of cations and anions. For crystal 1, a magnetic transition was observed at approximately 120 K; furthermore, its magnetic behavior was consistent with that of a regular Heisenberg antiferromagnetic (AFM) chain of S = 1/2 in the high-temperature phase (HT phase) and that of a spin-gap system in the low-temperature phase (LT phase). Such a phenomenon is similar to the spin-Peierls transition. However, the crystal structure of 1 in the LT phase at 100 K revealed that its structural transition is associated with the magnetic transition. Because crystal 2 (S = 0) did not exhibit a structural transition, the structural transition of 1 is driven by spin-lattice interaction.     

Thermal- and pressure-induced cooperative spin transition in the 2D and 3D coordination polymers {Fe(5-Br-pmd)z[M(CN)x]y} (M=AgI, AuI, NiII, PdII, PtII)

A new family of cyanide-based spin-crossover polymers with the general formula {Fe(5-Br-pmd)z[M(CN)x]y} [M=AgI (1), AuI (2), NiII (3), PdII (4), PtII (5); 5-Br-pmd=5-bromopyrimidine; z=1 or 2, x=2 or 4, and y=2 or 1] have been synthesized and characterized using single-crystal X-ray diffraction (XRD), X-ray powder diffraction (XRPD), magnetic susceptibility measurements, and differential scanning calorimetry (DSC). At 293 K, compound 1 presents the monoclinic space group C2/c, whereas at 120 K, it changes to the monoclinic space group P21/c. At 293 K, the crystal structure of 1 displays an uninodal three-dimensional network whose nodes, constituted of FeII, lie at the inversion center of an elongated octahedron. The equatorial bond lengths are defined by the N atoms of four [AgI(CN)2]- groups belonging to two crystallographically nonequivalent AgI atoms, Ag(1) and Ag(2). They are shorter than those of the axial positions occupied by the N atoms of the 5-Br-pmd ligands. The Fe-N average bond length of 2.1657(7) A is consistent with a high-spin (HS) state for the FeII ions. At 120 K, the crystal structure changes refer mainly to the FeII environment. There are two crystallographically independent FeII ions at this temperature, Fe(1) and Fe(2), which adopt the HS and low-spin (LS) states, respectively. The average Fe-N bond length for Fe(1) [2.174(5) A] and Fe(2) [1.955(5) A] agrees well with the reported magnetic data at this temperature. The spin transition of the FeII ions labeled as Fe(1) is found to be centered at Tc downward arrow=149 K and Tc upward arrow=167 K and accompanied by a drastic change of color from orange (HS) to red (LS). Magnetic susceptibility measurements under applied hydrostatic pressure performed on 1 have shown a linear displacement of the transition to higher temperatures while the hysteresis width remains unaltered in the interval of pressures of 105 Pa to 0.34 GPa. A further increase of the pressure induces the spin transition in the Fe(2) ions, which is completely accomplished at 1.12 GPa (T1/2=162 K). Compounds 1 and 2 are isostructural, but 2 does not exhibit spin-transition properties; the FeII centers remain in the HS state in the temperature range investigated, 5-300 K. Compounds 3-5 are not similar or isostructural with 1. A two-dimensional structure for 3-5 has been proposed on the basis of analytical data and the XRPD patterns. Compounds 3-5 undergo first-order spin transition where the critical temperatures for the cooling (Tc downward arrow) and warming (Tc upward arrow) modes are 170 and 180 K (3), 204 and 214 K (4), and 197 and 223 K (5), respectively. It is worth mentioning the color change from yellow to orange observed in 3-5 upon spin transition. The thermodynamic parameters associated with the spin transition estimated from DSC measurements are DeltaH=6 kJ mol(-1) (1), 11 kJ mol(-1) (3), 16 kJ mol(-1) (4), and 16 kJ mol(-1) (5) and DeltaS=38 J K(-1) mol(-1) (1), 62 J K(-1) mol(-1) (3), 76 J K-1 mol(-1) (4), and 81 J K(-1) mol(-1) (5).     

Observation of metal ion dependent packing structures and magnetic behaviors of metal-bis-1, 2-dithiolene complexes

The crystal structures and magnetic properties were investigated experimentally and theoretically for two S = ? spin chain complexes, which consist of [M(mnt)(2)](-) (M = Pt for 1 or Pd for 2) with 1-(4'-bromo-2'-flurobenzyl)-4-aminopyridinium (1-BrFBz-4-NH(2)Py(+)). The 1-BrFBz-4-NH(2)Py(+) cations exhibit different molecular conformations and arrangements in 1 and 2; the [M(mnt)(2)](-) anions form regular stacks in 1, whereas they form irregular stacks in 2. In addition, the intermolecular interactions between the [M(mnt)(2)](-) anions and cations are also different from each other in the crystals of 1 and 2. Complex 1 shows the magnetic characteristics of a low-dimensional antiferromagnetic coupling spin system with a spin-Peierls-type transition around 7 K, and complex 2 exhibits diamagnetism over the temperature range of 5-300 K. Theoretical analyses, based on the calculations for the charge density distributions of [Pt(mnt)(2)](-) and [Pd(mnt)(2)](-) anions and the magnetic exchange constants within the anion spin chains, addressed the diverse molecular alignments in the crystals of 1 and 2 and distinct magnetic behaviors between 1 and 2.     

New approach to the synthesis of an organopolymolybdate polymer in aqueous media by linkage of multicarboxylic ligands

The reaction of molybdates with multicarboxylic ligands resulted in the crystalline materials of [Na 8(Mo (VI) 10O 32EDTA)(H 2O) 35] n ( 1) and (NH 4) 8 n [Mo (VI) 10O 32PDTA] n (H 2O) 30 n ( 2) (EDTA = 1,2-diaminoethanetetraacetate; PDTA = 1,3-diaminopropanetetraacetate). In the two compounds, decamolybdate clusters are covalently linked by multicarboxylic ligands to form unusual meso-helical chains. For the first time, the synthesis of an organopolyoxometalate polymer is realized in aqueous media, which opens a green chemical approach to the fabrication of polyoxometalate-based polymers. The photochromic properties of 1 in the poly(vinyl alcohol) film displayed reddish-brown coloration upon UV irradiation, providing a new coloration material for photochromic films.     

Structural, thermal, and magnetic study of solvation processes in spin-crossover [Fe(bpp)(2)][Cr(L)(ox)(2)](2).nH(2)O complexes

The influence of lattice water in the magnetic properties of spin-crossover [Fe(bpp)2]X2.nH2O salts [bpp = 2,6-bis(pyrazol-3-yl)pyridine] is well-documented. In most cases, it stabilizes the low-spin state compared to the anhydrous compound. In other cases, it is rather the contrary. Unraveling this mystery implies the study of the microscopic changes that accompany the loss of water. This might be difficult from an experimental point of view. Our strategy is to focus on some salts that undergo a nonreversible dehydration-hydration process without loss of crystallinity. By comparison of the structural and magnetic properties of original and rehydrated samples, several rules concerning the role of water at the microscopic level can be deduced. This paper reports on the crystal structure, thermal studies, and magnetic properties of [Fe(bpp)2][Cr(bpy)(ox)2]2.2H2O (1), [Fe(bpp)2][Cr(phen)(ox)2]2.0.5H2O.0.5MeOH (2), and [Fe(bpp)2][Cr(phen)(ox)2]2.5.5H2O.2.5MeOH (3). Salt 1 contains both high-spin (HS) and low-spin (LS) Fe2+ cations in a 1:1 ratio. Dehydration yields the anhydrous spin-crossover compound with T1/2 downward arrow = 353 K and T1/2 upward arrow = 369 K. Rehydration affords the dihydrate [Fe(bpp)2][Cr(bpy)(ox)2]2.2H2O (1r) with 100% HS Fe2+ sites. Salt 2 also contains both HS and LS Fe2+ cations in a 1:1 ratio. Dehydration yields the anhydrous spin-crossover compound with T1/2 downward arrow = 343 K and T1/2 upward arrow = 348 K. Rehydration affords [Fe(bpp)2][Cr(phen)(ox)2]2.0.5H2O (2r) with 72% Fe2+ sites in the LS configuration. The structural, magnetic, and thermal properties of these rehydrated compounds 1r and 2r are also discussed. Finally, 1 has been dehydrated and resolvated with MeOH to give [Fe(bpp)2][Cr(bpy)(ox)2]2.MeOH (1s) with 33% HS Fe2+ sites. The influence of the guest solvent in the Fe2+ spin state can anticipate the future applications of these compounds in solvent sensing.     

Helix-turn-helix motifs in unsolvated peptides

The conformations of unsolvated Ac-A14KG3A14K + 2H+ (Ac = acetyl, A = alanine, K = lysine, G = glycine) have been examined by ion mobility measurements and molecular dynamics simulations. This peptide was designed as a model helix-turn-helix motif. It was found to adopt three distinct geometries which were assigned to an extended helical conformation which is only stable at low temperatures (<230 K), a relatively high energy but metastable structure with exchanged lysines, and a coiled-coil. The coiled coil (which consists of an antiparallel arrangement of two helical alanine sections linked by a flexible glycine loop) is the dominant conformation. For temperatures >350 K, the experimental results indicate the helices uncouple and the loop randomizes. From equilibrium constants determined for this helix coupling right arrow over left arrow uncoupling transition, we found DeltaH degrees = -45 kJ mol-1 and DeltaS degrees = 114 J K-1 mol-1. -DeltaH degrees is essentially the enthalpy change for docking the two helices together while DeltaS degrees is essentially the entropy change for freeing up the glycine loop.