Synthesis of branched copolysilanes from trichlorosilanes

Soluble polymers and copolymers have been prepared from monosubstituted trichlorosilanes via thermal reductive coupling with sodium in toluene. Phenyltrichlorosilane has been copolymerized with methylphenyl dichlorosilane, with n-hexyltrichlorosilane, with tetrachlorosilane and with tetrakis(chlorodimethylsilyl)silane. n-Hexyltrichlorosilane has been copolymerized with methylphenyldichlorosilane, with phenyltrichlorosilane and with silicon tetrachloride. Soluble polymers and copolymers with molecular weight in the range ≈ 2,000 to ≈ 10⁶ have been obtained. The absorption and emission spectra of the resulting polymers are strongly affected by the presence of trisilyl- and tetrasilylsubstituted silicon atoms. © 1995 John Wiley & Sons, Inc.     

Synthesis of organic–inorganic chiral block poly(methylphenylsilane) functional polymers,and study of their optical and chiroptical properties

Polysilanes upon UV irradiation give rise to silyl macroradicals which are capable to initiate radical polymerization. Hence, chiral block functional polysilanes were synthesized by UV irradiation of poly(methylphenylsilane) (PMPS) with a vinyl chiral monomer, (R)‐N‐(1‐phenylethyl)methacrylamide (R‐NPEMAM). The synthesized copolymer samples were characterized by FTIR, NMR, and UV–vis spectroscopy. The number and weight average molecular weights of PMPS and synthesized chiral‐block‐PMPS were measured by GPC analysis. Two glass transition temperatures (T_g) of the synthesized materials clearly indicate the formation of chiral‐block‐PMPS copolymers. SEM analysis also indicated the synthesized organic–inorganic block copolymers. The optical and chiroptical properties of the synthesized materials were studied. The cotton effect is observed not only at 276 nm due to aromatic ring of the chiral monomer units but also at 325 nm which is associated with the Si–Si conjugation of PMPS block of synthesized functional polysilanes. Such tunable chirality may find potential application in optoelectronics. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3626–3634     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Nuclear magnetic relaxation of α-13C nuclei of helical poly(γ-hexyl-L-glutamate) and poly(γ-benzyl-L-glutamate)

Spin-lattice relaxation times (T₁), spin-spin relaxation times (T₂), and nuclear Overhauser enhancements (NOE), at 75.5 MHz are reported for α-¹³C nuclei of poly (γ-benzyl-L -glutamate) in deuterated dimethylformamide at 60°C and of poly(γ-hexyl-L -glutamate) in cyclohexanone at 48 and 79°C. It is shown that for molecular weights above 10⁵, the polypeptides cannot be considered as essentially rigid helices with internal librational motions; additional backbone flexing motions contribute to the relaxation behavior.     

Synthesis and characterization of poly(β‐hydroxybutyrate) and poly(ϵ‐caprolactone) copolyester by transesterification

To synthesize the copolyester of poly(β‐hydroxybutyrate) (PHB) and poly(?‐caprolactone) (PCL), the transesterification of PHB and PCL was carried out in the liquid phase with stannous octoate as the catalyzer. The effects of reaction conditions on the transesterification, including catalyzer concentration, reaction temperature, and reaction time, were investigated. The results showed that both rising reaction temperature and increasing reaction time were advantageous to the transesterification. The sequence distribution, thermal behavior, and thermal stability of the copolyesters were investigated by ¹³C NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, wide‐angle X‐ray diffraction, optical microscopy, and thermogravimetric analysis. The transesterification of PHB and PCL was confirmed to produce the block copolymers. With an increasing PCL content in the copolyesters, the thermal behavior of the copolyesters changed evidently. However, the introduction of PCL segments into PHB chains did not affect its crystalline structure. Moreover, thermal stability of the copolyesters was little improved in air as compared with that of pure PHB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1893–1903, 2002     

Synthesis of new amphiphilic diblock copolymers containing poly(ethylene oxide) and poly(α‐olefin)

This article discusses an effective route to prepare amphiphilic diblock copolymers containing a poly(ethylene oxide) block and a polyolefin block that includes semicrystalline thermoplastics, such as polyethylene and syndiotactic polystyrene (s‐PS), and elastomers, such as poly(ethylene‐co‐1‐octene) and poly(ethylene‐co‐styrene) random copolymers. The broad choice of polyolefin blocks provides the amphiphilic copolymers with a wide range of thermal properties from high melting temperature ～270 °C to low glass‐transition temperature ～?60 °C. The chemistry involves two reaction steps, including the preparation of a borane group‐terminated polyolefin by the combination of a metallocene catalyst and a borane chain‐transfer agent as well as the interconversion of a borane terminal group to an anionic (? O^?K⁺) terminal group for the subsequent ring‐opening polymerization of ethylene oxide. The overall reaction process resembles a transformation from the metallocene polymerization of α‐olefins to the ring‐opening polymerization of ethylene oxide. The well‐defined reaction mechanisms in both steps provide the diblock copolymer with controlled molecular structure in terms of composition, molecular weight, moderate molecular weight distribution (M_w/M_n < 2.5), and absence of homopolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3416–3425, 2002     

Poly(β-amino acid)s. IV. Synthesis and conformational properties of poly(α-isobutyl-L-aspartate)

Poly(α-isobutyl-L -aspartate) was prepared by the polycondensation reaction of p-nitrophenyl ester of α-isobutyl-L -aspartate and the conformation of the poly(β-amino acid) was investigated by X-ray diffraction, polarized infrared, circular dichroism (CD), optical rotatory dispersion (ORD), and NMR spectroscopy. α-Isobutyl β-p-nitrophenyl-L -aspartate hydrochloride and hydrobromide were used as monomers and dimethylformamide, chloroform, and chlorobenzene, as solvents. A high-molecular-weight polymer with [η] 1.0 dl/g (dichloroacetic acid, 25°C) was formed in the polymerization of the hydrochloride in chloroform at 25°C. The X-ray diagram and polarized infrared spectrum of the stretched polymer film obtained from a chloroform solution suggested a cross-β-form as the most probable structure in the solid state. The CD spectra of the polymer in a 2,2,2-trifluoroethanol (TFE) solution and its film cast from the solution showed a peak at 205 nm and a trough at 190 nm which were assigned to a β-structure. The polymer was associated in chloroform. The NMR and ORD spectra in chloroform were similar to those in TFE, which suggests that the polymer also exists in the β-structure in chloroform. The addition of small amounts of dichloroacetic acid and sulfuric acid to chloroform and TFE solutions, respectively, destroyed the β-structure. A random copolymer of α-isobutyl-L -aspartate with β-alanine was also prepared by polycondensation reaction. The copolymer apparently did not form an ordered structure in the solid state or in solution.     

Degradation of poly(methylphenylsilylene) and poly(di-n-hexylsilylene)

Degradation of poly(methylphenylsiylene) and poly(di-n-hexylsilylene) was studied by chemical and mechanical methods at ambient and higher temperatures. Purely thermal degradation in solid state starts as a slow process at 150°C and provides soluble and insoluble products which include cyclosilanes as well as various siloxanes. Sonication at ambient temperatures leads to the mechanical degradation of high molecular weight polymers by homolytic cleavage induced by shear forces. No cyclics are formed under these conditions. Polysilanes in the presence of strong nucleophiles degrade exclusively to cyclic oligomers. Rate of this back-biting chain reaction depends on substituents at silicon atom, alkali metal, solvents, and temperature. Electrophiles degrade polysilanes to various α,ω-difunctional oligosilanes. © 1993 John Wiley & Sons, Inc.     

Synthesis of α,ω-arylamine functionalized poly(dimethylsiloxane)s

This research has focused on the development of telechelic, aromatic amine functional, poly(dimethylsiloxane) oligomers without any aliphatic components in the polymer backbone. The intent is to produce flexible oligomers with enhanced thermal stability for incorporation into materials which will be processed at elevated temperatures. The poly(dimethylsiloxane)s have been synthesized using living polymerization of hexamethylcyclotrisiloxane with protected aniline derivatives as initiators and termination reagents for the reactions. Low molecular weight oligomers prepared using the living polymerization method can be easily converted to a range of higher, controlled molecular weight materials in redistribution reactions. A basic tetramethylammonium siloxanolate catalyst in conjunction with octamethylcyclotetrasiloxane has been used for the equilibration procedure. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of functionalized poly(ɛ‐caprolactone)

Polyesters constitute an important class of materials for in vivo biomedical applications. Poly(?‐caprolactone) (PCL) is a hydrophobic biodegradable polyester which is employed to a lesser extent in drug delivery applications due to its rather limited range of physicochemical characteristics. Here, we present a new paradigm for the synthesis of functionalized PCL via copolymerization of caprolactone with α,ω‐epoxy esters. Ethyl 2‐methyl‐4‐pentenoate oxide was used as a monomer which was copolymerized with ?‐caprolactone to yield random copolymers of poly(?‐caprolactone‐co‐ethyl‐2‐methyl‐4‐pentenoate oxide). The reaction conditions were optimized to generate functionalization greater than 25%. The use of ester‐epoxides favors a statistical and uniform distribution of monomer along the polymer backbone, which while preserving some of the key properties of PCL such as glass transition that is below room temperature, allows the tailoring of the melting behavior of PCL. The strategy presented herein opens up new avenues for engineering PCL properties for biomedical applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3375–3382     

Heat capacity and vibrational dynamics of α poly(β-benzyl-L-aspartate)

Poly(β-benzyl-L-aspartate) (PBLA) is an unusual polypeptide, which is capable of going into four different conformations, namely, left-handed α helix, right-handed α helix, ω helix, and β pleated sheet. The present work is a complete study of normal modes and their dispersion in the unusual left-handed α form. A special feature of some of the dispersion curves is their tendency to bunch in the neighborhood of helix angle. This is attributed to the presence of strong intramolecular interactions. Crossing and repulsion between the dispersion curves is also observed. The N-deuterated analogue of PBLA has been studied to check the validity of assignments and force field (Urey Bradley). Specific heat has been obtained from dispersion curves via density of states. A comparative study of left-handed and right-handed forms is presented. © 1996 John Wiley & Sons, Inc.     

Piezoelectric relaxation in poly(γ-benzyl-glutamate)

The piezoelectric d- and e-constants, together with the elastic constant and the dielectric constant, were measured for oriented poly(γ-benzyl-glutamate) (PBG) films with various elongation ratios as a function of frequency and temperature, using an apparatus developed by us. The results are discussed in terms of a general theory of piezoelectricity for inhomogeneous systems, in particular for a disperse two-phase system. The piezoelectricity of PBG film is proved to originate from the piezoelectric and optically active symmetry of PBG crystallities and their orientation distribution by three findings: (1) the d₁₄ component of the piezoelectric matrix, which is the only component for a uniaxially or uniplanarly oriented system, is observed; (2) d₁₄ > 0 for PBDG and d₁₄ < 0 for PBLG; (3) d₁₄ is proportional to the degree of orientation F_c of PBG crystallites, as determined by x-ray diffraction. By extrapolating to perfect orientation, d₁₄ is determined to be 5 × 10^?8 cgs esu, if the side chains of PBG are rigid. The piezoelectric relaxation of PBG due to thermal motion of the side chains has a dual character: it is relaxational at lower frequencies and retardational at higher frequencies. On the assumption that the α-helical main chains surrounded by the bulky side chains are responsible for the origin of the piezoelectricity, such relaxation phenomena are interpreted in terms of the relaxation of the local elastic field in the main chains. An equivalent model having the same frequency characteristics is proposed to include the higher order structure of the PBG film.     

Anionic polymerization of cyclic ester and amide in miniemulsion: Synthesis and characterization of poly(ε‐caprolactone) and poly(ε‐caprolactone‐co‐ε‐caprolactam) nanoparticles

For the first time, poly(ε‐caprolactone) and poly(ε‐caprolactone‐co‐ε‐caprolactam) nanoparticles were successfully obtained by anionic polymerization of ε‐caprolactone and anionic copolymerization of ε‐caprolactone with ε‐caprolactam, respectively, in heterophase by the miniemulsion technique. After polymerization the resulting dispersions are stable for hours in case of the pure polyester and days for the copolymer. The syntheses were carried out with different continuous phases, amounts of surfactant, initiator, and monomers. The influence of the reaction parameters on the molecular weight of the polymers and on colloidal characteristics like size and morphology of the nanoparticles were studied by dynamic light scattering, gel permeation chromatography, differential scanning calorimetry, nuclear magnetic resonance, and Fourier transform infrared spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and barrier properties of poly(ε-caprolactone)-layered silicate nanocomposites

A new polymer-ceramic nanocomposite has been synthesized consisting of well-dispersed, two-dimensional layers of an organically modified mica-type silicate (MTS) within a degradable poly(ε-caprolactone) matrix. A protonated amino acid derivative of MTS was used to promote delamination/dispersion of the host layers and initiate ring-opening polymerization of ε-caprolactone monomer, resulting in poly(ε-caprolactone) chains that are ionically bound to the silicate layers. The polymer chains can be released from the silicate surface by a reverse ion-exchange reaction and were shown to be spectroscopically similar to pure poly(ε-caprolactone). Thick films of the polymer nanocomposite exhibit a significant reduction in water vapor permeability that shows a linear dependence on silicate content. The permeability of nanocomposite containing as low as 4.8% silicate by volume was reduced by nearly an order of magnitude compared to pure poly(ε-caprolactone). © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with ? NCO terminals. Fourier transform infrared (FTIR), ¹³C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between ? NCO groups at the end of the PCL and ? OH (or ? COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (T_g), melting temperature (T_M), crystallizing temperature (T_c), melting enthalpy (ΔH_m), crystallizing enthalpy (ΔH_c), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004     

Synthesis and crystallization of star‐shaped photocleavable poly(ε‐caprolactone)s

Here, we report on the synthesis and different crystallization behavior of linear‐ and star‐ PCL's containing a photocleavable linker (5‐hydroxy‐2‐nitro benzaldehyde), modulated by photochemical switching. Basis is the attachment of a photocleavable moiety close to the star‐core of a three‐arm star poly(caprolactone), so that the crystallization behavior can be controlled via a photochemical stimulus. The polymerization of ε‐caprolactone using a trivalent photocleavable initiator and stannous octanoate catalyst resulted in the synthesis of different molecular weights of star‐shaped photocleavable polymers. Various techniques like ¹H NMR and ESI‐TOF‐MS confirmed the successful synthesis of the star‐shaped polymers. Complete photocleavage is ensured via GPC, HPLC, and ESI‐TOF‐MS. DSC studies clearly indicated the enhancement in crystallinity after photocleavage of the star‐shaped poly(ε‐caprolactone)s. Hence, for the first time phototriggered crystallization behavior of PCL polymers is reported, where the confinement exerted by the star architecture is removed by photoirradiation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 642–649     

Synthesis and micellization of star‐like hyperbranched polymer with poly(ethylene oxide) and poly(ε‐caprolactone) arms

Novel star‐like hyperbranched polymers with amphiphilic arms were synthesized via three steps. Hyperbranched poly(amido amine)s containing secondary amine and hydroxyl groups were successfully synthesized via Michael addition polymerization of triacrylamide (TT) and 3‐amino‐1,2‐propanediol (APD) with feed molar ratio of 1:2. ¹H, ¹³C, and HSQC NMR techniques were used to clarify polymerization mechanism and the structures of the resultant hyperbranched polymers. Methoxyl poly(ethylene oxide) acrylate (A‐MPEO) and carboxylic acid‐terminated poly(ε‐caprolactone) (PCL) were sequentially reacted with secondary amine and hydroxyl group, and the core–shell structures with poly(1TT‐2APD) as core and two distinguishing polymer chains, PEO and PCL, as shell were constructed. The star‐like hyperbranched polymers have different sizes in dimethyl sulfonate, chloroform, and deionized water, which were characterized by DLS and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1388–1401, 2008