Packing density and gas permeability of copolyimides containing bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride constituent

Packing density and gas permeability of two copolyimide series containing an alicyclic monomer, bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BCDA), and a fluorinated monomer, hexafluoroisopropylidene,2,2-bis(phthalic acid anhydride) (6FDA), were measured. Incorporation of a rigid BCDA segment in 6FDA polyimides either increases gas permeability or improves gas selectivity, depending on the base 6FDA polyimide. In the case of the highly gas permeable 6FDA polyimide, introduction of BCDA further increases gas permeability despite a loss in the amount of free volume. In the moderately gas permeable 6FDA polyimide, on the other hand, the introduction improves gas selectivity. © 1995 John Wiley & Sons, Inc.     

Methylthiofurane: Herstellung und Reaktionen

Preparation and Reactions of Methylthiofurans By lithiation of 3,4-dimethoxyfuran, 2-methylfuran and furan, followed by reaction with dimethyldisulfide, the methylthiofurans 2, 8 , and 10 have been prepared. Reaction of 8 with maleic anhydride has yielded 6-methyl-3-(methylthio)phthalic anhydride ( 9 ), a yellow substance with a strong greenish fluorescence, obviously formed by elimination of H₂O from an unstable cycloadduct. An analgous reaction of 2 resulted in an unexpected mixture from which the following yellow compounds were isolated: 3-hydroxy-4,5-dimethoxy-6-(methylthio)phthalic anhydride ( 3 ), 4-hydroxy-5-methoxy-3,6-bis(methylthio)phthalic anhydride ( 4 ), and bis(S-methyl) (2Z,4E,6Z)-2,3,6,7-tetramethoxy-4,5-bis(methylthio)-2,4,6-octatrienethioate ( 5 ). Compound 5 is also formed on standing of 2 at RT. Mild acid hydrolysis of 2 results in ring-opening accompanied by an intramolecular oxido-reduction to yield S-methyl(3Z)-3-methoxy-4-(methylthio)-2-oxo-3-butenethioate ( 6a ). The structures of compounds 5 and 6a have been determined by X-ray analysis.     

Transport of C1–C3 hydrocarbons in poly(phenylene oxides) membranes

Transport of CH₄, C₂H₄ and C₂H₆ in poly(phenylene oxides) membranes at low pressures has been studied. The relation between the free volume and permeability of the polymers was analyzed in terms of the `dual-sorption' model. The accessible free volume of the polymers was estimated assuming the density of a sorbed fluid is equal to the density of the corresponding liquid. Transient separation of the three-component mixture CH₄/C₂H₄/C₂H₆ was studied.     

Silica-containing polyetherimide hybrid films based on methyltriethoxysilane as precursor of inorganic network

Polyetherimide hybrid films containing 5–40% silica were prepared through a sol-gel process and thermal imidization by using methyltriethoxysilane as precursor of the inorganic network and a poly(amic acid) resulting from polycondensation reaction of 2,2-bis[4-(4-aminophenoxy)phenyl]propane with 2,2-bis[(3,4-dicarboxyphenoxy)phenyl]propane dianhydride. The properties of these films, morphology, water vapor sorption capacity, free surface energy, mechanical, thermal and electrical characteristics, were studied. The films exhibited good thermal stability, having an initial decomposition temperature above 470 °C and glass transition temperature in the range of 187–200 °C. They showed low dielectric constant and low dielectric loss in a large frequency field. Gas permeation tests using small molecules (He, N₂, O₂ and CO₂) at 6 bar and 30 °C indicated that the hybrid films containing higher silica content showed higher permeability for all the tested gases.     

Photo-oxidation products of polyetherimide ULTEM determined by MALDI-TOF-MS. Kinetics and mechanisms

Poly 2,2-bis4-(3,4-dicarboxyphenoxy) phenylpropane dianhydride-1,3-phenylendiamine copolymer (ULTEM) was subjected to photo aging in the attempt to find evidence on the structure of the species formed in the oxidative degradation. The oxidation was followed as a function of the exposure time by MALDI and SEC/MALDI techniques. The SEC curves showed extensive degradation, with the formation of low molar mass oligomers having different end groups. Valuable structural information on the photo-oxidized ULTEM species was extracted from the MALDI spectra of the photo-oxidized ULTEM. These showed the presence of polymer chains containing acetophenone, phenyl acetic acid, phenols, benzoic acid, phthalic anhydride and phthalic acid end groups. The mechanisms accounting for the formation of photo-oxidation products involve several simultaneous reactions: (1) photo-cleavage of methyl groups of the N-methyl phthalimide terminal units; (2) photoxidative degradation of the isopropylidene bridge of BPA units; (3) photo-oxidation of phthalimide units to phthalic anhydride end groups: (4) hydrolysis of phthalic anhydride end groups. The kinetic behaviour of all the species detected is in agreement with the predictions of the reaction mechanisms hypothesized.     

Gas transport properties of 6FDA-TMPDA/MOCA copolyimides

The gas permeation behavior of 2,2′-bis(3,4′dicarboxyphenyl) hexafluoropropane dianhydride(6FDA)-2,4,6-trimethyl-1,3-phenylenediamine (TMPDA)/4,4′-methylene bis(2-chloroaniline) (MOCA) copolyimides was investigated by systematically varying the diamine ratios. All the copolyimides were soluble in most of the common solvents. The gas permeabilities and diffusion coefficients decreased with increasing MOCA content; however, the permselectivity of gas pairs such as H₂/N₂, O₂/N₂, CO₂/CH₄ was enhanced with the incorporation of MOCA moiety. Moreover, all of the copolyimides studied in this work exhibited performance near, lying on or above the existing upper bound trade-off line between permselectivity and permeability.     

连茚四酮类有机磁性化合物的合成及性能

分别以邻苯二甲酸酐、4-甲基邻苯二甲酸酐和四氯邻苯二甲酸酐为原料, 采用Gabriel & Leupold法合成了3个连茚四酮类化合物, 即2,2′-二茚满-1,1′,3,3′-四酮(1)、5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮(2)和4,4′,5,5′,6,6′,7,7′-八氯-2,2′-二茚满-1,1′,3,3′-四酮(3). 元素分析、¹H NMR、FTIR 和MS测定分析表明, 此3个分子主要以烯醇式存在, 同时存在分子内氢键; 通过电子自旋共振(ESR)谱测定, 给出了各化合物的ESR谱参数值. 结果表明, 化合物1~3均有良好的ESR图谱, 是只含有C, H, O及Cl的纯有机磁性化合物, 分子内都含有稳定的自由基. 通过量子化学计算, 推测出了自由基可能形成的位置及此类化合物最可能的存在形式(烯醇式), 且证明分子内存在1个氢键.     

The synthesis and transformations of ethyl (Z)-2-[2,2-bis(ethoxycarbonyl)vinyl]amino-3-dimethylaminopropenoate,a new reagent in the synthesis of heterocyclic compounds

Ethyl (Z)-2-[2,2-bis(ethoxycarbonyl)vinyl]amino-3-dimethylaminopropenoate (5) , a new reagent in the synthesis of heteroaryl substituted β-amino- α,β- -dehydro—amino acid derivatives and some fused hetero-cyclic systems, was prepared from ethyl N-2,2-bis(ethoxycarbonyl)vinylglycinate (3) and N,N-dimethyl-formamide dimethyl acetal (4) . The substitution of the dimethylamino group in the compound 5 with heterocyclic amines produced ethyl 2-[2,2-bis(ethoxycarbonyl)vinyl]amino-3-heteroarylaminopropenoates 7a-f and, in some instances, [2,2-bis-(ethoxycarbonyl)vinyl]aminoazolo- or -azinopyrimidine derivatives 8g-k.     

Superactive and stereospecific catalysts. I. Structures and productivity

Two series of catalysts were made, one from MgCl₂–A solution containing MgCl₂, EH (2-ethylhexanol), and EB (ethyl benzoate) dissolved in decane and another from MgCl₂–B solution containing MgCl₂, EH, and phthalic anhydride which reacted to form the corresponding phthalic ester. Reactions of these solutions with TiCl₄ with or without another ester produced a family of eight catalysts. They form two groups, one having monoesters as modifiers, and the other containing diesters as modifiers. The surface area, pore volume, x-diffractions, polymerization activity, and catalytic stereospecificity of these catalysts have been compared. The diester catalysts differ from the monoester catalysts in every respect. By comparison the corresponding member of the diester catalysts have half as much Ti per Mg, more than 10 times the pore volume, more than a 100-fold the surface area, about 50% more productivity, and greatly increased steroespecificity.     

Diammonium hydrogen phosphate: a versatile and inexpensive reagent for one-pot synthesis of dihydropyrimidinones, quinazolinones and azalactones under solvent-free conditions

Diammonium hydrogen phosphate, (NH₄)₂HPO₄, efficiently catalyzes the three-component Biginelli reaction between an aldehyde, a β-dicarbonyl compound and urea or thiourea under solvent-free conditions to afford the corresponding dihydropyrimidinones in high yields. Also, the synthesis of 2,3-disubsitituted-(3H)-quinazolin-4-ones is achieved by the one-pot reaction of isatoic anhydride, primary amines and orthoesters in the presence of (NH₄)₂HPO₄. The reaction of hippuric acid with aromatic aldehydes and acetic anhydride resulted in the formation of azalactones using catalytic amounts of (NH₄)₂HPO₄.     

Synthesis of Biphenols Containing Anhydride,Imido, or Dicyano Arylene Moieties

The novel biphenols, 3,6-bis(4-hydroxyphenyl)phthalic anhydride (2) and 3,6-bis(4-hydroxyphenyl)benzene-1,2-dicarbonitrile (15) were synthesized. Reaction of trans-anethole (4-propenylanisole) (6) with the Schiff base 7 yielded l,4-bis((4-methoxyphenyl)-l,3-butadiene (8). Diels-Alder reactions with maleic anhydride or fumaronitrile followed by dehydrogenation and demethylation gave the corresponding biphenols in good yields (ca. 73%). Reaction of 2 with primary amines yields the corresponding imides.     

Structural and Thermal Characterisation of Nadimide Resins

A series of hexachloronadimides containing phosphine oxide in the backbone were synthesized by the reaction of bis(3-amino phenyl) methyl phosphine oxide (BAP) with pyromellitic dianhydride (PMDA)/3,3’,4,4’-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and hexachloronadic anhydride in glacial acetic acid/acetone. Structural characterisation of the resins was carried out by infrared, nuclear magnetic resonance spectroscopy and elemental analysis. Thermal characterisation of uncured resin was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperature of uncured resins were above 310±10°C with T _max 330±10°C in nitrogen atmosphere. Char yield at 800°C ranged from 37–42%. This revised version was published online in July 2006 with corrections to the Cover Date.     

The first example of a preparative 1,4-perfluoroalkylation using (perfluoroalkyl)trimethylsilanes

Reactions of 2-perfluoroalkylchromones with (perfluoroalkyl)trimethylsilanes proceed as a 1,4-nucleophilic perfluoroalkylation to give 2,2-bis(perfluoroalkyl)chroman-4-ones in high yields after acid hydrolysis. Oxidation of 2,2-bis(trifluoromethyl)-6-methylchroman-4-one with K₂S₂O₈ leads to fluorinated analogs of natural lactarochromal and the corresponding acid.     

An effective method for the synthesis of carboxylic esters and lactones using substituted benzoic anhydrides with Lewis acid catalysts

An efficient mixed-anhydride method for the synthesis of carboxylic esters and lactones using benzoic anhydride having electron withdrawing substituent(s) is developed by the promotion of Lewis acid catalysts. In the presence of a catalytic amount of TiCl₂(ClO₄)₂, various carboxylic esters are prepared in high yields through the formation of the corresponding mixed-anhydrides from 3,5-bis(trifluoromethyl)benzoic anhydride and carboxylic acids. The combined catalyst consisting of TiCl₂(ClO₄)₂ together with chlorotrimethylsilane functions as an effective catalyst for the synthesis of carboxylic esters from free carboxylic acids and alcohols with 4-(trifluoromethyl)benzoic anhydride. Various macrolactones are prepared from the free ω-hydroxycarboxylic acids by the combined use of 4-(trifluoromethyl)benzoic anhydride and titanium(IV) catalysts together with chlorotrimethylsilane under mild reaction conditions. The lactonization of trimethylsilyl ω-(trimethylsiloxy)carboxylates using 4-(trifluoromethyl)benzoic anhydride is also promoted at room temperature in the presence of a catalytic amount of TiCl₂(ClO₄)₂. An 8-membered ring lactone, a synthetic intermediate of cephalosporolide D, is successfully synthesized according to this mixed-anhydride method using 4-(trifluoromethyl)benzoic anhydride by the promotion of a catalytic amount of Hf(OTf)₄.     

Hydrophobic Vitamin B12. X. Steric Effect in Electrochemical Carbon-Skeleton Rearrangement Catalyzed by Hydrophobic Vitamin B12 in Nonaqueous Media

Abstract

A steric effect in the carbon-skeleton rearrangement catalyzed by heptamethyl cobyrinate perchlorate, [Cob(II)7C₁ester]C10₄, was investigated under electrochemical conditions. The controlled-potential electrolyses of alkyl halides having two carboxylic ester groups of different bulkiness on the same carbon atom, such as 2,2-bis(ethoxycarbonyl)-l-bromopropane, l-bromo-2-tert-butoxycarbonyl-2-ethoxy-carbonylpropane, l-bromo-2-cyclohexyloxycarbonyl-2-ethoxycarbonylpropane, and l-bromo-2-ethoxy-carbonyl-2-phenoxycarbonylpropane, were carried out in N,N-dimethylformamide, as catalyzed by [Cob(II)7C₁ester]CIO₄, to give the corresponding ester-migrated products in the dark at—1.5 V vs SCE in the presence of acetic acid and at—2.0 V vs SCE without acetic acid. As regards a correlation between bulkiness of an ester group and a migration aptitude, a smaller ester group tends to migrate to the adjacent carbon atom more readily than a larger one. The origin of such a steric effect is discussed with attention to the rate-determining step.     

Mechanism of phthalic anhydride formation in the oxidation of n-pentane on a vanadium-phosphorus oxide catalyst

The reaction paths of product formation in the partial oxidation of n-pentane on vanadium-phosphorus oxide (VPO) and VPO-Bi catalysts are considered. The condensed products of n-pentane oxidation were analyzed by chromatography-mass spectrometry, and the presence of C₄ rather than C₅ unsaturated hydrocarbons was detected. It was found that the concentration of phthalic anhydride in the products increased upon the addition of C₄ olefins and butadiene to the n-pentane-air reaction mixture. With the use of a system with two in-series reactors, it was found that the addition of butadiene to a flow of n-butane oxidation products (maleic anhydride, CO, and CO₂) resulted in the formation of phthalic anhydride. The oxidation of 1-butanol was studied, and butene and butadiene were found to be the primary products of reaction; at a higher temperature, maleic anhydride and then phthalic anhydride were formed. The experimental results supported the reaction scheme according to which the activation of n-pentane occurred with the elimination of a methyl group and the formation of C₄ unsaturated hydrocarbons. The oxidation of these latter led to the formation of maleic anhydride. The Diels-Alder reaction between maleic anhydride and C₄ unsaturated hydrocarbons is the main path of phthalic anhydride formation.     

Molecular composite. I. Novel block copolymers of liquid-crystalline polyamide and amorphous polyimide: Synthesis and characterization

Two series of PA/PI block copolymers have been prepared from a two-pot polycondensation reaction. Acid-terminated poly-p-benzamide (PBA) prepolymer, composed of a rigid-rod structure and lyotropic character, was synthesized by applying the phosphorylation reaction of Yamazaki. On the other hand, two amine-terminated polyimide prepolymers with an amorphous structure were prepared by a typical low-temperature condensation reaction from 4,4′-(hexafluoroisopropylidene)-bis(phthalic anhydride) (6FDA)/2,2′-bis-(4-aminophenyl)-hexafluoropropane (BAAF) and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA)/2,3,5,6-tetramethyl-p-phenylene diamine (TMPD). The molecular weight of these prepolymers was determined by intrinsic viscosity or GPC. The copolymerization was carried out by mixing two prepolymer solutions. The products were analyzed by extraction, IR, and η_inh so as to confirm that the copolymerization reaction was precisely accomplished. Thermal analysis and lyotropic behavior were studied for these block copolymers and the critical concentration in NMP–LiCl was found to be 6.0% for one among those block copolymers. The copolymers were observed to form anisotropic liquid-crystalline domains under polarized light once the solutions had been prepared at (and beyond) the critical concentration. © 1993 John Wiley & Sons, Inc.     

Borohydride reduction of acetophenone and esters of dehydrocarboxylic acids in the presence of chiral cobalt(<Emphasis Type="SmallCaps">II</Emphasis>) diamine complexes

The catalytic reduction of acetophenone, methyl α-acetamidocinnamate, and dimethyl itaconate with alcohol-modified sodium borohydride was studied in the presence of complexes CoCl₂·L₂ (L₂ are chiral C ₂-symmetric diamines: (4S,5S)-2,2-dimethyl-4,5-bis(aminomethyl)-1,3-dioxolane, (4S, 5S)-2,2-dimethyl-4,5-bis(methylaminomethyl)-1,3-dioxolane, (4S, 5S)-2,2-dimethyl-4,5-bis(dimethylaminomethyl)-1,3-dioxolane, and (4S, 5S)-2,2-dimethyl-4,5-bis(diphenylaminomethyl)-1,3-dioxolane). The maximum enantiomeric excess of (S)-1-phenylethanol was 24%, that of dimethyl α-methylsuccinate was 38%.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 342–347, February, 2005.     

Multiply charged ions of ruthenium(II), rhodium(III) and cobalt(III) complexes in electrospray ionization mass spectrometry

Multiply charged ions from electrospray ionization (ESI) were observed for ruthenium-bidentate ligand complexes, such as [RuL₂B]X₂ and [(RuL₂)₂B]X₄, where L is 2,2′-bipyridine, B are tetradentate ligands of 2,2′-bis(2′-pyridyl)bibenzimidazole and 2,6-bis(2′-pyridyl)benzodiimidazole, bidentate ligand of 2-(2′-pyridyl)benzimidazole and related compounds and X is CIO₄^- or CI^-. ESI mass spectra showed a simple mass pattern for easy structural assignment and detecting impurities. The mass spectra for binuclear complexes provide a charge state distribution ranging from 4+ to 2+ for Ru(II)—Ru(II) compounds and 5+ to 2+ for Ru(II)—Rh(III) compounds. It was found that different multiply charged ions are generated by loss of counterions and by protonation/deprotonation at the proton site of ligands B. The abundances of these ions are qualitatively explained in terms of the acidity of metal complexes depending on the bridging ligand structures and the charge of the metal ions. Ions produced by removal of ligands were hardly observed.     

Selective vapor‐phase oxidation of o‐xylene to phthalic anhydride over Co‐Mn/H3PW12O40@TiO2 using molecular oxygen as a green oxidant

The oxidation of o‐xylene to phthalic anhydride over Co‐Mn/H₃PW₁₂O₄₀@TiO₂ was investigated. The experimental results demonstrated that the prepared catalyst effectively catalyzed the oxidation of o‐xylene to phthalic anhydride. Also, the synergistic effect between three metals plays vital roles in this reaction. From a green chemistry point of view, this method is environmentally friendly due to carrying out the oxidation in a fixed‐bed reactor under solvent‐free condition and using molecular oxygen as a green and cheap oxidizing agent. The resulting solid catalysts were characterized by FT‐IR, XRD, XPS, ICP‐OES, FESEM, TEM, EDX, DR‐UV spectroscopy, BET and thermogravimetric analysis. The oxidation of o‐xylene yields four products: o‐tolualdehyde, phthaldialdehyde, phthalide and finally phthalic anhydride as the main product. The reaction conditions for oxidation of o‐xylene were optimized by varying the temperature, weight hourly space velocity and oxygen flow rate (contact time). The optimum weight percentage of phosphotungstic acid (HPW) and Co/Mn for phthalic anhydride production were 15 wt % and 2 wt%, respectively. The best Co/Mn ratio was found to be 10/1. Oxygen flow rate was very important on the phthalic anhydride formation. The optimum conditions for oxidation of o‐xylene were T = 370 °C, WHSV = 0.5 h^?1 and oxygen flow rate = 10 mL min^?1. Under optimized conditions, a maximum of 88.2% conversion and 75.5% selectivity to phthalic anhydride was achieved with the fresh catalyst. Moreover, reusability of the catalyst was studied and catalytic activity remained unchanged after at least five cycles.