In situ X-ray scattering studies of lyotropic liquid crystalline PBO and PBZT monofilament drawing

The results of a series of novel synchrontron-based in situ x-ray scattering experiments of monofilament fiber drawing from lyotropic solutions of poly(cis-benzoxazole) (PBO) and poly(trans-benzothiazole) (PBZT) are reported. The purpose of the study is to determine orientation and microstructure development in the draw zone as a function of shear rate in the capillary die, and spin draw ratio (SDR). The transition of the extrudate from opaque to the transparent is complete at about a SDR = 3 and f of 0.9. The filament orientation parameter (f) was found to depend strongly on spin draw ratio, but not shear rate. The orientation was found to increase down the extrudate toward completion of the draw down as one proceeds further from the die face up to an extrudate length of 3.8 cm. Coherence lengths on the order of 19 nm (axial), and 4.5 nm (lateral) have been observed. These “microdomain” sizes are consistent with the “crystallite” sizes typically observed in coagulated fiber. The occurrence of these microdomains in the draw zone as a precursor to the microfibrillar structure is believed to be the origin of low filament compressive strength. © 1994 John Wiley & Sons, Inc.     

The synthesis,characterization, and crystal structures of poly(2,6‐naphthalenebenzobisoxazole) and poly(1,5‐naphthalenebenzobisoxazole)

The rigid‐rod polymers, poly(2,6‐naphthalenebenzobisoxazole) (Naph‐2,6‐PBO) and poly(1,5‐naphthalenebenzobisoxazole) (Naph‐1,5‐PBO) were synthesized by high temperature polycondensation of isomeric naphthalene dicarboxylic acids with 4,6‐diaminoresorcinol dihydrochloride in polyphosphoric acid. Expectedly, these polymers were found to have high thermal as well as thermooxidative stabilities, similar to what has been reported for other polymers of this class. The chain conformations of Naph‐2,6‐PBO and Naph‐1,5‐PBO were trans and the crystal structures of Naph‐2,6‐PBO and Naph‐1,5‐PBO had the three‐dimensional order, although the axial disorder existed for both Naph‐2,6‐PBO and Naph‐1,5‐PBO. Naph‐2,6‐PBO exhibited a more pronounced axial disorder than Naph‐1,5‐PBO because of its more linear shape. The repeat unit distance for Naph‐2,6‐PBO (14.15 Å) was found to be larger compared with that of Naph‐1,5‐PBO (12.45 Å) because of the more kinked structure of the latter. The extents of staggering between the adjacent chains in the ac projection of the crystal structure were 0.25c and 0.23c for Naph‐2,6‐PBO and Naph‐1,5‐PBO, respectively. Naph‐1,5‐PBO has a more kinked and twisted chain structure relative to Naph‐2,6‐PBO. The kinked and twisted chain structure of Naph‐1,5‐PBO in the crystal seems to prevent slippage between adjacent chains in the crystal structure. The more perfect crystal structure of Naph‐1,5‐PBO may be due to this difficulty in the occurrence of the slippage. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1948–1957, 2006     

Synthesis of branch‐ring‐branch tadpole‐shaped [linear‐poly(ε‐caprolactone)]‐b‐[cyclic‐poly(ethylene oxide)]‐b‐ [linear‐poly(ε‐caprolactone)] by combination of glaser coupling reaction with ring‐opening polymerization

A novel amphiphilic branch‐ring‐branch tadpole‐shaped [linear‐poly(ε‐caprolactone)]‐b‐[cyclic‐poly(ethylene oxide)]‐b‐[linear‐poly(ε‐caprolactone)] [(l‐PCL)‐b‐(c‐PEO)‐b‐(l‐PCL)] was synthesized by combination of glaser coupling reaction with ring‐opening polymerization (ROP) mechanism. The self‐assembling behaviors of (l‐PCL)‐b‐(c‐PEO)‐b‐(l‐PCL) and their π‐shaped analogs of poly(ε‐caprolactone)/poly(ethylene oxide)]‐b‐poly(ethylene oxide)‐b‐[poly(ε‐caprolactone)/poly(ethylene oxide) with comparable molecular weight in water were preliminarily investigated. The results showed that the micelles formed from the former took a fiber look, however, that formed from the latter took a spherical look. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

In situ polymerization and characterization of graphene oxide‐co‐poly(phenylene benzobisoxazole) copolymer fibers derived from composite inner salts

A facile and efficient strategy for preparing well dispersed graphene oxide (GO)‐co‐Poly(phenylene benzobisoxazole) (PBO) copolymer fibers was carried out by direct in situ polycondensation of composite inner salts. The composite inner salts were achieved to improve the dispersivity, solubility, reactivity, and interfacial adhesion of GO in PBO polymer matrix. The structure and morphology of GO‐co‐PBO copolymer fibers have been characterized. It was demonstrated that GO were covalently incorporated with PBO molecular chains and dispersed considerably well in PBO fiber even the GO reach to 3 wt %. Meanwhile, the tensile modulus, tensile strength and thermal stability of GO‐co‐PBO copolymer fibers increased considerably with GO. The mechanism and theoretical calculation of GO enhanced PBO fiber were also discussed. The main reasons for the improvement on performance of PBO fiber should be attributed to good dispersion GO in PBO matrix and covalent bonding networks at the interface between GO and PBO molecular chains. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Stress distribution in poly‐p‐phenylenebenzobisoxazole (PBO) fiber estimated from vibrational spectroscopic measurement under tension. II. Analysis of inhomogeneous stress distribution in PBO fiber

Fourier transform Raman spectra were measured for poly‐p‐phenylenebenzobisoxazole (PBO) fiber subjected to a tensile stress, and the Raman shift factor (the frequency shift caused by 1 GPa tensile stress) depended strongly on the sample‐preparation condition. To clarify the reasons of this dependency, a mechanical series parallel model was adopted that could successfully and quantitatively explain the observed Raman shift factors and gave a concreate heterogeneous stress distribution in the PBO fibers. As a result, a mechanical series model was reasonable for PBO fiber. Broadening of Raman bands, which was observed when the PBO fiber was tensioned, could also be interpreted on the basis of an idea of heterogeneous stress distribution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1281–1287, 2002     

Molecular composite fibers from rigid rod polymers and thermoset resin matrixes

Fibers consisting of a rigid rod polymer and thermoset resin matrices were prepared. Poly(benzo-[1,2-d : 5,4-d′]bisoxazole-2,6-diyl)-1,4-phenylene} (PBO) in polyphosphoric acid (PPA) was blended with isophthaloyl bis-4-benzocyclobutene (1) or 2,6-bis-4-benzocyclobutene benzo[1,2-d: 5,4-d′]bisoxazole (2), and fibers were spun from these dopes. As-spun fibers that did not show phase segregation between the two components as examined with an optical microscope, were soluble in methanesulfonic acid (MSA). After heat treat-ment, the fibers swelled but did not dissolve in MSA. A fiber cross section of heat-treated PBO-1 fiber showed well-dispersed benzocyclobutene polymer domains of 200–500 Å by transmission electron microscopy (TEM). Films cast from MSA solutions of PBO and 2 were homogeneous, and TEM of heat-treated fiber showed only one phase. A molecular composite fiber was made. Some of these fibers showed 20–30% improvement in compressive strength over unmodified PBO fiber. © 1995 John Wiley & Sons, Inc.     

A study of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions

The stability of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions was studied. 2,6-Bis(4-tert-butylphenyl)benzo[1,2-d;4,5-d′]bisoxazole (1) dissolved in acetonitrile containing sulfuric acid and water at 80°C is stable. A suspension of 2,6-bis[4-(2-benzoxazoyl)phenyl]benzo[1,2-d;5,4-d′]bisoxazole (2) in 0.2 N H₂SO₄ or 0.2 N NaOH solution at 100°C for 21 days is stable. The intrinsic viscosity of a poly(p-phenylene)benzobisoxazole (PBO) fiber sample soaked in 0.2 N H₂SO₄, water with 1 wt % polyphosphoric acid (PPA), or 0.2 N NaOH remained the same. Under very severe hydrolytic conditions such as dissolution of compound 2 or PBO in PPA or methanesulfonic acid with residual water followed by coagulation in water, benzobisoxazole underwent bond cleavage to generate carboxylic acid and o-aminophenol functional groups. This is in contrast to an earlier hypothesis that the decrease in intrinsic viscosity under these conditions was due to chain association. Poly(p-phenylene)benzobisthiazole (PBT) also underwent bond cleavage under these very severe conditions, which are unlikely to be encountered in normal applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2637–2643, 1999     

An X-ray diffraction study of the different nematic mesophases of liquid-crystalline poly(urethane-ester)s

An x-ray investigation on powder specimens and stretched oriented fibers of poly(urethaneester)s TDI-CmCn, derived from various mesogenic alkylene di[4-(ω-hydroxyalkyloxy-4-oxybenzoyl)oxybenzoate]s (CmCn; m = 2, 4, or 6, and n = 4, 6, 8, or 10) and 2, 4-toluenediisocyanate (TDI), is reported. Evidence is provided for the formation of two different nematic mesophases in the polymers, namely a cybotactic nematic and a conventional nematic mesophase. Whereas samples TDI-C2C6, TDI-C6C4, and TDI-C6C10 formed one cybotactic nematic mesophase, samples TDI-C4C6, TDI-C6C6, and TDI-C6C8 exhibited both cybotactic nematic and conventional nematic mesophases in a sequence with increasing temperature, which were connected by a first-order transition. The analysis of the various features of the small-angle x-ray diffraction patterns indicates that two structural arrangements, namely smectic C-like and conventional nematic structures, coexist inside the cybotactic nematic mesophase of these poly(urethane-ester)s. © 1995 John Wiley & Sons, Inc.     

Synthesis and Characterization of Poly(p-phenylene benzobisoxazole)/Poly(pyridobisimidazole) Block Copolymers

Poly(p-phenylene benzobisoxazole)/poly(pyridobisimidazole) block copolymers (PBO-b-PIPD) were prepared by introducing poly(pyridobisimidazole) (PIPD) moieties into the main chains of poly(p-phenylene benzobisoxazole) (PBO) in order to enhance its photostability. PBO and copolymer fibers were directly prepared from the polymerization solutions by dry-jet wet-spinning. Chemical structures and molecular chains arrangement of the block copolymers were characterized by Fourier transform infrared (FTIR) spectroscopy, solid-state ¹³C-NMR and wide angle X-ray diffraction (WAXD). Thermal stability of the copolymers was investigated by thermogravimetric analysis (TGA) in nitrogen. Thin films of PBO and copolymers were cast from methanesulfonic acid (MSA) solutions. Both the films and fibers were exposed to UV light to determine their photostability. Changes in the chemical structures and surface morphologies of the films were characterized by FTIR spectra and scanning electronic microscopy (SEM), respectively. After UV light exposure, the retention of strength for copolymer fibers is improved compared to PBO fibers. The results revealed that copolymers suffered less photodegradation in comparison with homopolymer. The mechanism for the improved photostability of the copolymers was discussed.     

Isomorphism in the poly(3,3-bis-hydroxymethyloxetane) family and copolymers: Poly (3,3-bis-hydroxymethyloxetane-co-3-methyl-3-hydroxymethyloxetane)

Copolymers of 3,3-bis-hydroxymethyloxetane, BHMO, 3-metyl-3-hydroxymethyloxetane, MHMO, or with 3-ethyl-3-hydroxymethyloxetane, EHMO, monomer units were characterized by x-ray fiber diffraction, differential scanning calorimetry and ¹³C solid-state nuclear magnetic resonance (NMR). The copolymers are statistically random and crystalline throughout the range of compositions. Both P(BHMO) and P(MHMO) appear to crystallize in the same crystal form. The fiber repeat indicates a planar zigzag backbone conformation, c(fiber axis) = 4.77 ± 0.03 Å. Similarities in the x-ray fiber diagrams as well as a linear dependence of T_m with composition of copolymer with no change in fiber diagrams indicates isomorphism, a phenomenon in which the random substitution of MHMO monomeric units into the crystalline lattice of P(BHMO) occurs without hindering crystallization of the resulting copolymer. © 1994 John Wiley & Sons, Inc.     

Real-time X-ray scattering study of thermal expansion of poly(butylene terephthalate)

Real-time x-ray scattering at elevated temperatures has been used to investigate the thermal expansion characteristics of poly(butylene terephthalate), PBT. Changes in the six lattice parameters of the α-form of PBT were obtained from wide-angle x-ray scattering over the temperature range from 35 to 215°C. The linear thermal expansion coefficients relating the unit cell parameters at temperature T to their values at 0°C are found to be The temperature dependence of both the long period and the lamellar thickness of semicrystalline PBT were determined from real-time small-angle x-ray scattering analysis of the one-dimensional electron density correlation function. The long period, lamellar thickness, and degree of crystallinity increase as the temperature increases. We find an average linear thermal expansion coefficient of the bulk material to be α_ave = 5.0 × 10⁻⁴°C⁻¹. © 1992 John Wiley & Sons, Inc.     

Improvement of interfacial adhesion and nondestructive damage evaluation for plasma-treated PBO and Kevlar fibers/epoxy composites using micromechanical techniques and surface wettability

Comparison of interfacial properties and microfailure mechanisms of oxygen-plasma treated poly(p-phenylene-2,6-benzobisoxazole (PBO, Zylon) and poly(p-phenylene terephthalamide) (PPTA, Kevlar) fibers/epoxy composites were investigated using a micromechanical technique and nondestructive acoustic emission (AE). The interfacial shear strength (IFSS) and work of adhesion, Wa, of PBO or Kevlar fiber/epoxy composites increased with oxygen-plasma treatment, due to induced hydrogen and covalent bondings at their interface. Plasma-treated Kevlar fiber showed the maximum critical surface tension and polar term, whereas the untreated PBO fiber showed the minimum values. The work of adhesion and the polar term were proportional to the IFSS directly for both PBO and Kevlar fibers. The microfibril fracture pattern of two plasma-treated fibers appeared obviously. Unlike in slow cooling, in rapid cooling, case kink band and kicking in PBO fiber appeared, whereas buckling in the Kevlar fiber was observed mainly due to compressive and residual stresses. Based on the propagation of microfibril failure toward the core region, the number of AE events for plasma-treated PBO and Kevlar fibers increased significantly compared to the untreated case. The results of nondestructive AE were consistent with microfailure modes.     

Surface modification of high-performance polymeric fibers by an oxygen plasma. A comparative study of poly(p-phenylene terephthalamide) and poly(p-phenylene benzobisoxazole)

Poly(p-phenylene terephthalamide) (PPTA) and poly(p-phenylene benzobisoxazole) (PBO) fibers were exposed to an oxygen plasma under equivalent conditions. The resulting changes in the surface properties of PPTA and PBO were comparatively investigated using inverse gas chromatography (IGC) and atomic force microscopy (AFM). Both non-polar (n-alkanes) and polar probes of different acid-base characteristics were used in IGC adsorption experiments. Following plasma exposure, size-exclusion phenomena, probably associated to the formation of pores (nanoroughness), were detected with the largest n-alkanes (C(9) and C(10)). From the adsorption of polar probes, an increase in the number or strength of the acidic and basic sites present at the fiber surfaces following plasma treatment was detected. The effects of the oxygen plasma treatments were similar for PPTA and PBO. In both cases, oxygen plasma introduces polar groups onto the surfaces, involving an increase in the degree of surface nanoroughness. AFM measurements evidenced substantial changes in the surface morphology at the nanometer scale, especially after plasma exposure for a long time. For the PBO fibers, the outermost layer - contaminant substances - was removed thanks to the plasma treatment, which indicates that this agent had a surface cleaning effect.     

Hydrolytic stability of polybenzobisoxazole and polyterephthalamide body armor

Previous work conducted at the National Institute of Standards and Technology (NIST) to investigate the field failures of soft body armor containing the material poly(p -phenylene-2,6-benzobisoxazole), or PBO, revealed that this material was susceptible to hydrolysis, and a mechanism of this hydrolysis was proposed. In this work, viscometric estimations of the molar mass of environmentally conditioned PBO are used to support a previously proposed mechanism of PBO hydrolysis. Results with PBO were compared with poly(p-phenylene terephthalamide), or PPTA, which has been used in body armor applications for more than 30 years. Losses in tensile strength were found to correspond to a reduction in molar mass for PBO. This indicates that chain scission due to complete hydrolysis is occurring in this material. Similar trends were observed for PPTA, but the relationship between molar mass reduction and losses in tensile strength was not as evident for this material. Confocal microscopy, mechanical properties measurements, and molecular spectroscopy are used to further investigate the degradation of both PBO and PPTA.     

Improvement of surface wettability and interfacial adhesion ability of poly(p-phenylene benzobisoxazole) (PBO) fiber by incorporation of 2,5-dihydroxyterephthalic acid (DHTA)

By introducing 2,5-dihydroxyterephthalic acid (DHTA) into poly(p-phenylene benzoxazole) (PBO) macromolecular chains, dihydroxy poly(p-phenylene benzobisoxazole) (DHPBO) was synthesized and then DHPBO fibers were prepared by dry-jet wet-spinning method. Effects of hydroxyl polar groups on surface wettability and interfacial adhesion ability of PBO fiber were investigated. With the incorporation of double hydroxyl polar groups, contact angle on PBO fiber for water can decrease from 71.4° to 50.70°, and contact angle for ethanol can decrease from 37.2° to 27.40°. The wetting time on DHPBO fibers for water can be as short as 650 ms, which is half of that of PBO fibers. The interfacial shearing strength (IFSS) between DHPBO (10% mol content DHTA) fibers and epoxy resin is 18.87 MPa, 92.55% higher than that of PBO fibers. SEM images indicate that the PBO/epoxy composite failure mode may change from fiber/matrix adhesive failure to partially cohesive failure.     

Synthesis and characterization of poly(benzazoles) containing the bicyclo[2.2.2]octane moiety

Poly(benzobisoxazoles) (PBOs), poly(benzobisthiazoles) (PBTs) and copolymers thereof containing the 2,5-dihydroxybicyclo[2.2.2]octane moiety have been prepared and studied. The homopolymers were synthesized by the polycondensation of 2,5-dihydroxybicyclo[2.2.2]octane-1,4-dicarboxylic acid with 4,6-diamino-1,3-benzenediol dihydrochloride or 2,5-diamino-1,4-benzenedithiol dihydrochloride in poly(phosphoric acid). Random and block copolymers (PBO–PBT) were also prepared. The polymers were characterized by solubility, X-ray diffraction, spectroscopy (infrared and solid-state ¹³C nuclear magnetic resonance), and thermal analysis such as differential scanning calorimetry and thermogravimetric analysis. Thermogravimetric analysis showed thermal stability of the polymers above 375°C in air and under argon atmosphere. The polymers exhibited high resistance to organic and inorganic solvents. The polymers were converted to the more stable aromatic polymers via dehydration and retro Diels–Alder reactions of the 2,5-dihydroxybicyclo[2.2.2]octyl moiety by pyrolysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 277–281, 1998     

Melt‐processable blends of ionic poly(p‐phenylene terephthalamide) and poly(4‐vinylpyridine): Relaxation behavior

Melt‐processable blends were prepared from rigid molecules of an ionically modified poly(p‐phenylene terephthalamide) (PPTA) and flexible‐coil molecules of poly(4‐vinylpyridine) (PVP). Dynamic mechanical analyses of blends with 50% or more of the ionic PPTA component revealed the presence of two distinct phases. The glass‐transition temperature of the more stable, ionic PPTA‐rich phase increased linearly with the ionic PPTA content. The second phase present in these blends was an ionic PPTA‐poor, or a PVP‐rich, phase. For this phase, a reasonably good fit of the data, showing the glass‐transition temperature as a function of the ionic PPTA content, was achieved between the results of this study and the reported results of previous investigation of molecular composites of the same two components with ionic PPTA contents of 15 wt % or less. The possible influence of annealing on the blend structure of a 90/10 blend of ionic PPTA and PVP was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1468–1475, 2003     

Adsorption properties for metal ions of waste poly(p‐phenylene terephthalamide) fiber after chemical modification

Waste poly(p‐phenylene terephthalamide) fibers (PPTA) were chemically modified through nitration and nitro‐reduction reactions to obtain nitro‐ and amino‐containing fibers and used as adsorbents for metal ions. The structures of the modified fibers were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X‐ray diffraction (XRD), and thermogravimetric (TG) analysis. Metal ions, such as Ni²⁺, Pb²⁺, Cu²⁺, and Hg²⁺, were used to determine the adsorption capacities of the PPTA fibers before and after modification in aqueous solutions. The results showed that the modification improved the adsorption capability of fibers and extraction ratio of metal ions significantly. The adsorption mechanism of modified PPTA fibers for metal ions was proposed. The adsorption processes of Ni²⁺, Pb²⁺, and Cu²⁺ followed well a pseudosecond‐order model onto PPTA‐NH₂. The Langmuir and Freundlich models were employed to fit the isothermal adsorption. The results revealed that the linear Langmuir isotherm model is better‐fit model to predict the experimental data. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigation at the chain segmental level of the miscibility of poly(vinyl chloride)/atactic poly(methyl methacrylate) blends

We employed high‐resolution ¹³C cross‐polarization/magic‐angle‐spinning/dipolar‐decoupling NMR spectroscopy to investigate the miscibility and phase behavior of poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) blends. The spin–lattice relaxation times of protons in both the laboratory and rotating frames [T₁(H) and T_1ρ(H), respectively] were indirectly measured through ¹³C resonances. The T₁(H) results indicate that the blends are homogeneous, at least on a scale of 200–300 Å, confirming the miscibility of the system from a differential scanning calorimetry study in terms of the replacement of the glass‐transition‐temperature feature. The single decay and composition‐dependent T_1ρ(H) values for each blend further demonstrate that the spin diffusion among all protons in the blends averages out the whole relaxation process; therefore, the blends are homogeneous on a scale of 18–20 Å. The microcrystallinity of PVC disappears upon blending with PMMA, indicating intimate mixing of the two polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2390–2396, 2001     

Water‐Soluble Polypeptides at Aqueous Interface Produce Extensible Silk‐Like Fiber

A silk‐like extensible poly(α,L ‐amino acid) fiber is created by self‐assembly of poly(α,L ‐lysine) and poly(α,L ‐glutamic acid) at their aqueous solutions' interface. Distinguishing features of the PLL/PLG fiber are the high extensibility and good stretch. Stretching after spinning changes this fiber to a rigid and strong one. The concept and the poly(α,L ‐amino acid) fibers themselves open doors for the production of new protein fibers which are more silk‐ and wool‐like.