Solid‐State NMR Study on Relationships between Miscibility and Chain Mobility in Poly(4‐Methylstyrene)/Poly(Cyclohexyl Methacrylate) Blend

The phase behavior and motional mobility in binary blends of poly(4‐methylstyrene) (P4MS) and poly(cyclohexyl methacrylate) (PCHMA) have been examined by ¹³C solid state NMR techniques. The blend miscibility was studied by measuring the ¹H spin‐relaxation times in the laboratory frame (T₁^H) and in the rotating frame (T_1ρ^H), respectively. Although intermolecular spin diffusion contributes to the proton relaxations in accordance with homogeneity, T_1ρ^H data shows signs of in complete averaging. The T_1ρ^H relaxation behavior indicates the existence of heterogeneous do mains with shortest dimensions in the nanometer range, which is also sup ported by the intermolecular cross polarization experiments with variable contact times. In addition, according to the resuits of carbon T_1ρ relaxation time measurements, it is concluded that mixing is intimate some what enough to cause a reduction in local chain mobility for P4MS and vice versa for PCHMA.     

Nuclear magnetic relaxation and molecular motion in poly(vinylidine fluoride)

Pulsed NMR T₁, T₂, and T_1ρ measurements are reported for poly(vinylidine fluoride) (PVF₂). The results demonstrate clearly the presence of four relaxation processes, three amorphous and one crystalline. The α relaxation is undoubtedly a crystalline one, while β and γ are both amorphous, in agreement with earlier conclusions from dielectric and dynamic mechanical measurements. The fourth relaxation (β′) observed initially in the mechanical measurements of Kakutani, but undetected in dielectric experiments, has been confirmed in our results and the process is described by an activation energy of 15.1 kcl/mole. Motion of folds on the surface of crystal lamellae is deemed to be the responsible mechanism for the β′ relaxation. Two models have been considered in the interpretation of the α process; rotation of crystalline chains in the vicinity of defects and rotational oscillation of restricted amplitude of all crystalline chains about the main chain axes. Rotation of amorphous chains is a possible mechanism for the γ process while motions of a general nature are responsible for the β relaxation. Our experimental results again indicate that spin diffusion plays an important role in the overall NMR response of the polymer.     

Solid-state 13C-NMR studies of the aging of poly(vinylidene fluoride)/poly(methyl methacrylate) blends

Solid state ¹³C-NMR was used to investigate the miscibility and subsequent separation of solution-cast blends of poly(vinylidene fluoride) (PVF₂) and poly(methyl methacrylate) (PMMA) with aging for a range of compositions. It was found that one amorphous phase and intimate mixing of the polymer chains in this phase existed for all compositions of the blends, even after 2 months of aging at room temperature as determined by the proton spin lattice relaxation time T_1ρH in the rotating frame, and the time constant T_CH for transfer of magnetization. The T_1ρH is sensitive to the spatial homogeneity of the blend via spin diffusion and would indicate the presence of phases or domains in the amorphous component of the blend larger than approximately 19 Å. The T_CH is proportional to the inverse sixth power of the interatomic distances needed for transfer of magnetization from proton to carbon and would be sensitive to a separation of polymer chains in the amorphous phase with aging on the order of 4–5 Å. There was an increase of the T_1ρH and T_CH values with aging, indicating that a subtle separation between unlike chains in the amorphous phase was occurring although a single amorphous phase was present.     

How to measure absolute P3HT crystallinity via 13C CPMAS NMR

We outline the details of acquiring quantitative ¹³C cross‐polarization magic angle spinning (CPMAS) nuclear magnetic resonance on the most ubiquitous polymer for organic electronic applications, poly(3‐hexylthiophene) (P3HT), despite other groups' claims that CPMAS of P3HT is strictly nonquantitative. We lay out the optimal experimental conditions for measuring crystallinity in P3HT, which is a parameter that has proven to be critical in the electrical performance of P3HT‐containing organic photovoltaics but remains difficult to measure by scattering/diffraction and optical methods despite considerable efforts. Herein, we overview the spectral acquisition conditions of the two P3HT films with different crystallinities (0.47 and 0.55) and point out that because of the chemical similarity of P3HT to other alkyl side chain, highly conjugated main chain polymers, our protocol could straightforwardly be extended to other organic electronic materials. Variable temperature ¹H NMR results are shown as well, which (i) yield insight into the molecular dynamics of P3HT, (ii) add context for spectral editing techniques as applied to quantifying crystallinity, and (iii) show why T_1ρ^H, the ¹H spin–lattice relaxation time in the rotating frame, is a more optimal relaxation filter for distinguishing between crystalline and noncrystalline phases of highly conjugated alkyl side‐chain polymers than other relaxation times such as the ¹H spin–spin relaxation time, T₂^H, and the spin–lattice relaxation time in the toggling frame, T_1xz^H. A 7 ms T_1ρ^H spin lock filter, prior to CPMAS, allows for spectroscopic separation of crystalline and noncrystalline ¹³C nuclear magnetic resonance signals. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.     

Annealing‐induced increase of permeability and amorphous‐phase mobility in an ethylene–vinylacetate copolymer

The 50% increased permeability after annealing of semicrystalline poly(ethylene/vinylacetate) containing 3 mol % vinylacetate is linked to increased mobility in the amorphous phase, as identified by line‐narrowing of ¹H wideline nuclear magnetic resonance (NMR) spectra and by reduced cross‐polarization efficiency in ¹³C NMR. Other morphological parameters, such as crystallinity, measured as 30 to 35% by differential scanning calorimetry (DSC) and NMR, are hardly changed by annealing. Small‐angle X‐ray scattering and NMR studies, using spin diffusion as well as T_1ρ and T₁ relaxation, detected only a small increase in crystallite thickness. The annealing‐induced enhancement in segmental mobility in the amorphous regions corresponds to a temperature shift of about 10 K, from which an increase of the motional rate by a factor of 2 is estimated, and which can account for the enhancement in the permeability. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2774–2780, 2001     

Correlation between local mobility and mechanical properties of high‐speed melt‐spun nylon‐6 fibers

This article establishes the processing–microstructure–motion–property relationship of high‐speed melt‐spun nylon‐6 fibers. From solid‐state ¹H NMR T_1ρ (spin–lattice relaxation time in the rotating frame) relaxation studies, all nylon‐6 fibers spun at 4500–6100 m/min showed three‐component exponential decay with the time constants T_1ρ,I, T_1ρ,II, and T_1ρ,III, indicating that there existed three different motional phases. These phases were assigned to immobile crystalline, intermediate rigid amorphous, and mobile amorphous regions. The determination of the correlation time (τ_c) of the respective phases provided information about the local molecular mobility of each phase with respect to the spinning speed. As the spinning speed increased, τ_c of the crystalline region increased (4500–5200 m/min) and then reached a plateau. However, τ_c for the rigid amorphous region increased from 5200 m/min onward, indicating that the rigid amorphous chains were more oriented and constrained in the spinning speed range of 5500–6100 m/min. The drastic increase of the maximum thermal stress for all fibers from 5500 to 6100 m/min was coincident with the τ_c characteristics of the rigid amorphous region. The significant increase in tenacity and Young's modulus and the large decrease in elongation at break at 5500–6100 m/min were also in good agreement with the local molecular motion of the intermediate rigid amorphous phase in the nylon‐6 fibers. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 993–1000, 2001     

Investigation at the chain segmental level of the miscibility of poly(vinyl chloride)/atactic poly(methyl methacrylate) blends

We employed high‐resolution ¹³C cross‐polarization/magic‐angle‐spinning/dipolar‐decoupling NMR spectroscopy to investigate the miscibility and phase behavior of poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) blends. The spin–lattice relaxation times of protons in both the laboratory and rotating frames [T₁(H) and T_1ρ(H), respectively] were indirectly measured through ¹³C resonances. The T₁(H) results indicate that the blends are homogeneous, at least on a scale of 200–300 Å, confirming the miscibility of the system from a differential scanning calorimetry study in terms of the replacement of the glass‐transition‐temperature feature. The single decay and composition‐dependent T_1ρ(H) values for each blend further demonstrate that the spin diffusion among all protons in the blends averages out the whole relaxation process; therefore, the blends are homogeneous on a scale of 18–20 Å. The microcrystallinity of PVC disappears upon blending with PMMA, indicating intimate mixing of the two polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2390–2396, 2001     

High-resolution solid-state 13C NMR study of ethylcellulose films

Ethylcellulose films cast from concentrated solutions of chloroform, benzene, and carbon tetrachloride were subjected to the NMR relaxation measurements including ¹H spin-lattice relaxation time (T_1H), rotating-frame ¹H spin-lattice relaxation time (T_1ρH), and ¹³C spin-lattice relaxation time (T_1C). The values of T_1ρH for carbons in the glucose units of ethyl-cellulose were of the same order of magnitude as those reported for the crystalline and noncrystalline regions of ramie cellulose. The values of T_1C for unsubstituted C2, C3 carbons were smaller than those for the corresponding carbons in the noncrystalline region of native celluloses. The T_1C values for unsubstituted C2, C3, and substituted C6 carbons showed a small but definite dependence on the solvent from which the films were cast. © 1993 John Wiley & Sons, Inc.     

Novel Biodegradable Poly(pentadecalactone-co-oxo-crown ether) Studied with Solid-State 1H and 13C NMR

Two grades of a novel biodegradable copolymer of ω-pentadecalactone (PDL) and 2-oxo-12-crown-4 (OC), with respective molar compositions of 77/23 and 52/48, were characterized with 1D and 2D MAS ¹H and ¹³C NMR spectroscopy. The results indicate that both copolymers are semi-crystalline with PDL divided over the crystalline and amorphous phase, and OC exclusively located in the amorphous phase. Proton T₂ and T_1ρ relaxation confirm the existence of small crystalline domains.     

NMR microscopy - limitations and applications in material sciences -

Alongside the numerous applications of NMR spectroscopy in analytical chemistry, materials sciences and morphological studies by magnetic resonance imaging (MRI), NMR microscopy makes possible a whole new range of applications in materials sciences such as the development and non destructive testing of polymers and ceramic materials. This includes imaging of microscopic structures and structural changes in such materials. The contrast in the images is determined by the NMR specific parameters chemical shift δ, spin density ρ, spin lattice relaxation time T₁, spin spin relaxation time T₂ and spin lattice relaxation time in the rotating frame T_1ρ. The numerous well developed methods available make it possible to study dynamic processes by fast imaging, the measurement of diffusion constants of solvents or liquids, the mobility of fluids in polymers or ceramics or the three dimensional evaluation of pore sizes in porous materials.     

Solid‐state 1H → 19F/19F → 1H CP/MAS NMR study of poly(vinylidene fluoride)

Solid‐state ¹H → ¹⁹F and ¹⁹F → ¹H cross‐polarization magic angle spinning (CP/MAS) NMR spectra have been investigated for a semicrystalline fluoropolymer, namely poly(vinylidene fluoride) (PVDF). The ¹H → ¹⁹F CP/MAS spectra can be fitted by five Lorentzian functions, and the amorphous peaks were selectively observed by the DIVAM CP pulse sequences. Solid‐state spin‐lock experiments showed significant differences in T_1ρ^F and T_1ρ^H between the crystalline and amorphous domains, and the effective time constants, T_HF* and T_1ρ*, which were estimated from the ¹H → ¹⁹F CP curves, also clarify the difference in the strengths of dipolar interactions. Heteronuclear dipolar oscillation behaviour is observed in both standard CP and ¹H → ¹⁹F inversion recovery CP (IRCP) experiments. The inverse ¹⁹F → ¹H CP‐MAS and ¹H → ¹⁹F CP‐drain MAS experiments gave complementary information to the standard ¹H → ¹⁹F CP/MAS spectra in a manner reported in our previous papers for other fluoropolymers. The value of N_F/N_H (where N is a spin density) estimated from the CP‐drain curve is within experimental error equal to unity, which is consistent with the chemical structure. Copyright © 2001 John Wiley & Sons, Ltd.     

Rotating frame proton spin-lattice relaxation measurements of poly (ethylene oxides)

Measurements of T_lρ as a function of temperature have been made on two polyethylene oxides (PEO) with molecular masses of 5,000 and 30,000. The T_1ρ measurements show biexponential behavior of the relaxation function in the temperature range from 170 K to 350 K. The intensities of the components of the relaxation function are constant over this temperature range in agreement with the crystallinities of the samples. The two relaxation times can be associated with the crystalline and amorphous component; the relaxation time minima describe the α relaxation in the crystalline regions of PEO and the glass transition in amorphous PEO.     

Investigation on the dynamics of aromatic polyesters by means of high resolution solid state CPMAS 13C NMR

The dynamics of amorphous aromatic polyesters consisting of poly(ethylene terephthalate) (PET), poly(ethylene isophthalate) (PEI), and poly(ethylene 2,6-naphthalenedicarboxylate) (PEN) has been investigated by means of solid state CPMAS ¹³C NMR. Proton T₂, ¹³C T_1ρ, and proton T_1ρ decays have been measured in particular, and the experimental data fitted to suitable model functions to determine best relaxation parameters. The fitting results show for proton T₂ and ¹³C T_1ρ measurements the presence of two components with different relaxation times and intensities, arising from different motional domains. The proton T_1ρ, on the contrary, shows a single component which limits the dimensions of the two regions to less than 20 Angstroms. The dependence of ¹³C T_1ρ values on two different irradiating field strengths (H₁ = 38 KHz, H₁ = 60 KHz) allowed the assignment of each component to relatively rigid and mobile regions. By comparing the three polymers we observe that PEN and PEI have a similar relaxation behavior, while a higher fraction of mobile components was found for PET. These differences are believed to arise mainly from local motions of the aromatic rings. The relaxation measurements have been evaluated to suggest a correspondence to O₂ and CO₂ gas permeabilities in PET, PEI, and PEN. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1557–1566, 1998     

Solid‐state NMR analyses of the crystalline–noncrystalline structure and its thermal changes for ethylene ionomers

The crystalline–noncrystalline structure and its structural changes from thermal treatments for ethylene ionomers have been investigated with solid‐state ¹³C and ²³Na NMR spectroscopy. ¹³C spin–lattice relaxation time (T_1C) measurements reveal that as‐received ethylene ionomers have much enhanced molecular mobility in the crystalline region in comparison with conventional polyethylene samples. By appropriate annealing, however, polyethylene‐like morphological features reflecting T_1C behavior can also be observed. ¹³C spin–spin relaxation time (T_2C) measurements for the noncrystalline region reveal the existence of two components with different T_2C values, and these two components have been assigned to the crystalline–amorphous interfacial and rubbery–amorphous components. These results indicate that the structure of the major part of the noncrystalline region in the ethylene ionomers is similar to that of bulk‐crystallized polyethylene samples, regardless of possible ionic aggregates. The origin of the lower temperature endothermic peak in the heating process of the differential scanning calorimetry curve observed for the as‐received sample has also been examined somewhat in detail. As a result, it is proposed that the melting of smaller crystallites produced during storage at room temperature is the origin of the lower temperature peak. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1142–1153, 2002     

Studies on the phase structure of ethylene‐vinyl acetate copolymers by solid‐state 1H and 13C NMR

The phase structure of a series of ethylene‐vinyl acetate copolymers has been investigated by solid‐state wide‐line ¹H NMR and solid‐state high‐resolution ¹³C NMR spectroscopy. Not only the degree of crystallinity but the relative contents of the monoclinic and orthorhombic crystals within the crystalline region varied with the vinyl acetate (VA) content. Biexponential ¹³C NMR spin–lattice relaxation behavior was observed for the crystalline region of all samples. The component with longer ¹³C NMR spin–lattice relaxation time (T₁) was attributed to the internal part of the crystalline region, whereas the component with shorter ¹³C NMR T₁ to the mobile crystalline component was located between the noncrystalline region and the internal part of the crystalline region. The content of the mobile crystalline component relative to the internal part of the crystalline region increased with the VA content, showing that the ¹³C NMR spin–lattice relaxation behavior is closely related to the crystalline structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2199–2207, 2002     

Structure,dynamics and interactions in polymer systems as studied by NMR spectroscopy

The possibilities of NMR spectroscopy in studies of interactions in polymer systems are demonstrated on the example of two types of macromolecular complexes: (i) By measuring ¹H NMR high resolution line intensities, the formation of ordered associated structures of syndiotactic (s) poly(methyl methacrylate)(PMMA) in mixed solvents was quantitatively characterized. The obtained results permit us to assume that the mechanism by which the solvent affects self-association of s-PMMA involves specific interactions of the solvent molecules with PMMA units. Solid state high resolution ¹³C NMR spectra of associated s-PMMA gels were also measured and compared with the spectra of a solid s-PMMA sample. (ii) By using ¹³C solid state NMR spectroscopy, the differences in the structure of the amorphous and crystalline phases in pure poly(ethylene oxide) and its complexes with p-dichlorobenzene or p-nitrophenol were characterized. Prounounced differences also in the dynamic structure of the crystalline phase in these systems are indicated by the relaxation times T₁(C), T_1ρ(C) and T_1ρ(H).     

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

Silica-PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1-5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), ¹³C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy (¹³C{¹H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame (T_1ρ(H)), in the laboratory frame (T₁(H)) and cross-polarization times (T_CH). Results showed that silica nanoparticles are well dispersed in the polymeric matrix whose structure remains amorphous. The degradation of the polymer occurs at higher temperature in the presence of silica because of the interaction between the two components.     

Solid-state 13C nuclear magnetic resonance characterization of MDI-based polyurethanes

¹³C solid-state nuclear magnetic resonance (NMR) experiments on linear polyurethanes and poly(ether-urethane) block copolymers demonstrate that ¹³C spin-lattice relaxation experiments in the laboratory [T₁(C)] and rotating [T_1p(C)] frames provide the most information about domain morphology in these microphase-separated polymer systems. T₁(H) TCH, and T_1p(H) data are less useful in a 4,4′-methylene bis(p-phenyl isocyanate)-1,4-butanediol (MDI/BD) hard-segment material, the MDI bridging methylene and the MDI urethane carbonyl T₁(C and T_1p(C) times fall in characteristic ranges for crystalline, amorphous, interfacial, and dissolved species. BD methylene carbons have short T_1p(C) for crystalline and long T_1p(C) for amorphous hard-segment aggregates. The distinct T_1p(C) and T₁(C) fractins observed are attributed to the presence of several crystalline polymorphs. Both T₁(C) results and DSC endotherms indicate that the crystalline polymorphs present in the poly(ether-urethane) are less ordered than the types seen in the pure hard-segment material. © 1993 John Wiley & Sons, Inc.     

Examination of miscibility at molecular level of poly(hydroxyether of bisphenol A)/poly(N-vinyl pyrrolidone) blends by cross-polarization/magic angle spinning 13C nuclear magnetic resonance spectroscopy

The miscibility of poly(hydroxyether of bisphenol A) (phenoxy) and poly(N-vinyl pyrrolidone) (PVP) was investigated by differential scanning calorimetry (DSC) and high-resolution solid-state nuclear magnetic resonance (NMR) techniques. The DSC studies showed that the phenoxy/PVP blends have a single, composition-dependent glass transition temperature (T_g). The S-shaped T_g-composition curve of the phenoxy/PVP blends was reported, which is indicative of the strong intermolecular hydrogen-bonding interactions. To examine the miscibility of the system at molecular level, high-resolution solid-state ¹³C nuclear magnetic resonance (NMR) technique was employed. Upon adding phenoxy to system, the chemical shift of carbonyl carbon resonance of PVP was observed to shift downfield by 1.6 ppm in the ¹³C cross-polarization (CP)/magic angle spinning (MAS) together with the high-power dipolar decoupling (DD) spectra when the concentration of phenoxy is 90 wt %. The observation was responsible for the formation of intermolecular hydrogen bonding. The proton spin-lattice relaxation time T₁(H) and the proton spin-lattice relaxation time in the rotating frame T_1ρ(H) were measured as a function of the blend composition. The T₁(H) result was in good agreement with the thermal analysis, i.e., the blends are completely homogeneous on the scale of 20 ∼ 30 nm. The six results of T_1ρ(H) further indicated that the blends were homogeneous on the scale of 40 ∼ 50Å. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2291–2300, 1998     

Characterization of blends of poly(vinyl chloride) and poly(N‐vinyl pyrrolidone) by FTIR and 13C CP/MAS NMR spectroscopy

Blends of poly(vinyl chloride) (PVC) with Poly(N‐vinyl pyrrolidone) (PVP) were investigated by Fourier infrared spectroscopy (FTIR) and high‐resolution solid‐state ¹³C cross‐polarization/magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) spectroscopy. The intermolecular interactions between PVP and PVC are weaker than the self‐association of PVP and the inclusion of the miscible PVC results in the decreased self‐association of PVP chains, which was evidenced by the observation of high‐frequency shift of amide stretching vibration bands of PVP with inclusion of PVC. This result was further substantiated by the study of ¹³C CP/MAS spectra, in which the chemical shift of carbonyl resonance of PVP was observed to shift to a high field with inclusion of PVC, indicating that the magnetic shielding of the carbonyl carbon nucleus is increased. The proton spin‐lattice relaxation time in the laboratory frame (T₁ (H)) and the proton spin‐lattice relaxation time in the rotating frame (T_1ρ(H)) were measured as a function of the blend composition to give the information about phase structure. It is concluded that the PVC and PVP chains are intimately mixed on the scale of 20–30Å. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2412–2419, 1999