Liquid crystal polymers. 14. Synthesis and properties of thermotropic poly(1,4-alkylphenylene terephthalates)

A series of terephthalate polyesters was prepared from substituted hydroquinone monomers that contained a single cyclic or branched alkyl group. All the polymers were crystalline with melting points well below 400°C that decreased as the size of the cycloalkyl substituent increased. Most of the polymers had clearing temperatures below 400°C and all formed nematic melts. Copolyesters that contained equimolar amounts of two different substituted hydroquinone monomers, which were crystalline and had broad temperature ranges for nematic phase formation, were also prepared.     

Thermal properties of some fully aromatic thermotropic liquid crystal polyesters

Wholly aromatic liquid crystalline main chain polyesters derived from terephthalic acid, phenyl- or (1-phenylethyl)hydroquinone modified with either 3,4′- or 4,4′-dicarboxydiphenylether and p-hydroxybenzoic acid, have been prepared by acidolysis and thermally investigated. All prepared polyesters exhibit excellent thermal stability up to about 400°C, however, the (1-phenylethyl)hydroquinone polyesters generally showed lower stability. Melting points could be decreased to around 200°C without any decrease in the thermal stability or the nematic range.     

Fully aromatic thermotropic liquid crystalline polyesters of 3,4′-dihydroxybenzophenone

A series of fully aromatic, thermotropic polyesters, derived from 3,4′-dihydroxybenzophenone and various aromatic dicarboxylic acids, was prepared by the high-temperature solution polycondensation method and examined for thermotropic behavior by a variety of experimental techniques. The aromatic dicarboxylic acids used in this study were 2,6-naphthalenedicarboxylic acid, 4,4′-bibenzoic acid, and terephthalic acid. The two homopolymers of 3,4′-DHB with either 2,6-NDA or 4,4′-BBA formed nematic LC phases at 285°C and 255°C and also exhibited isotropization transitions (T_i) at 317°C and 339°C, respectively. The copolymer of 3,4′-DHB with 50% TA and 50% 2,6-NDA also formed a nematic LC phase and had a broader range of LC phase than that of its respective homopolymers. Two other copolymers of 3,4′-DHB, both containing 50% 4,4′-BBA, also formed nematic LC phases at low T_f values. All of the thermotropic polyesters had high thermal stabilities. © 1994 John Wiley & Sons, Inc.     

Ring-opening Polymerization of Enantiopure Bicyclic Ether-ester Monomers toward Closed-loop Recyclable and Crystalline Stereoregular Polyesters via Chemical Upcycling of Bioplastic

Although great successes have been achieved, the preparation of closed-loop recyclable polyesters with high working temperatures still remains as a big challenge. Herein, we present the syntheses of a series of enantiopure bicyclic ether-ester monomers by upcycling of poly(3-hydroxybutyrate) bioplastic. The “living”/controlled ring-opening polymerizations of these enantiopure monomers to produce stereoregular polyesters with controlled molecular weights and well-defined chain ends were achieved. The effects of stereoconfiguration and substituent on polymerization kinetics and thermodynamics as well as the thermal properties of resultant polyesters were investigated. Of note, the stereoregular polyesters are semi-crystalline materials with melting temperatures up to 176 °C, even higher than the commodity polyolefin plastics. These polyesters can be depolymerized back to recover pristine monomers, thus successfully establishing a closed-loop life cycle.     

Synthesis and characterization of wholly aromatic polyesters derived from 1-phenyl-2,6-naphthalene-dicarboxylic acid and aromatic diols

A series of new wholly aromatic polyesters was synthesized by melt polycondensation of 1-phenyl-2,6-naphthalenedicarboxylic acid (PNDA) and diacetates of various aromatic diols. The aromatic diols studied are hydroquinone (HQ), methylhydroquinone (MHQ), phenylhydroquinone (PHQ), (α-phenylisopropyl)hydroquinone (PIHQ), 2,6-naphthalenediol (2,6-ND), 1,4-naphthalenediol (1,4-ND), and 4,4′-biphenol (BP). These polyesters were characterized for their crystallinity, glass transition temperature (T_g), melting temperature (T_m), liquid crystallinity, and thermal stability. In general, crystallinity of the polyesters are very low and the T_g values of the polyesters range from 150 to 172°C depending on the structure of aromatic diols. All of the polymers formed nematic phases above their T_m or T_g. The polyesters derived from PHQ and PIHQ are soluble in chlorinated hydrocarbon solvents. The initial decomposition temperatures of the polyesters are above 400°C under N₂ atmosphere. © 1996 John Wiley & Sons, Inc.     

Wholly aromatic thermotropic liquid crystalline polyesters of 3,3′-bis(phenyl)-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of wholly aromatic, thermotropic polyesters, derived from 3,3′-bis(phenyl)-4,4′-biphenol (DPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various linear comonomers, were prepared by the melt polycondensation reaction and characterized for their thermotropic properties by a variety of experimental techniques. The homopolymer of DPBP with 4,4′-BDA had a fusion temperature (T_f) at 265°C, exhibited a nematic phase, and had a liquid crystalline range of 105°C. All of the copolyesters of DPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA), or 50 mol % terephthalic acid (TA), 2,6-naphthalenedicarboxylic acid (2,6-NDA) had low T_f values in the range of 220–285°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 270–420°C, respectively. Their accessible T_i values would enable one to observe a biphase structure. Each of the copolymers with HBA or HNA had a much broader range of liquid crystalline phase. In contrast, each of the copolymers with TA or 2,6-NDA had a relatively narrow range of liquid crystalline phase. Each of these polyesters had a glassy, nematic morphology that was confirmed with the DSC, PLM, WAXD, and SEM studies. As expected, they had higher glass transition temperatures (T_g) in the range of 161–217°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 494–517°C, respectively. Despite their noncrystallinity, they were not soluble in common organic solvents with the exception that the homopolymer and its copolymer with TA had limited solubility in CHCl₃. However, they were soluble in the usual mixture of p-chlorophenol/1,1,2,2-tetrachloroethane (60/40 by weight) with the exception of the copolymer with 2,6-NDA. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 769–785, 1997     

Side chain liquid crystalline diethanolamine‐based polyesters with methoxy and/or nitroazobenzene mesogenic moieties

Side‐chain polyesters based on diethanolamine and 5‐hydroxyisophthalic acid with mesogenic methoxyazobenzene and nitroazobenzene groups were synthesized and their liquid crystalline properties were examined.

Four different types of polyesters were prepared by using various combinations of monomers differing in the mesogen group and the length of the spacer. The thermal and structural properties depend on the type of polyester as well as on the side chain length. The glass transition and isotropization temperatures increase when the methoxyazobenzene group is bound to a diol and decrease when it is bound to an isophthalic acid. Most of the polyesters are thermotropic liquid crystals and form a nematic phase on heating. Some polyesters exhibit shear induced isotropisation to nematic transition up to 25°C above the isotropization temperature.     

Synthesis and Characterization of Photosensitive Phosphorus Based Polymers Containing α,β‐Unsaturated Ketones in the Main Chain

1,3‐Bis(4‐hydroxyphenyl)propenone (BHPP) and 3‐(4‐hydroxy‐3‐methoxy phenyl)‐1‐(4‐hydroxyphenyl)propenone (HMPHPP) were used as monomers for preparing photosensitive phosphorus containing polyesters. The photosensitive monomers BHPP and HMPHPP were prepared respectively by refluxing 4‐hydroxybenzaldehyde and 3‐methoxy‐4‐hydroxybenzaldehyde with 4‐hydroxy acetophenone. The polyesters were synthesized by interfacial polycondensation of photosensitive diols with N‐phenylphosphoramidic dichloride using hexadecyltrimethyl ammonium bromide (HDTMAB) as phase‐transfer catalyst. Copolymers were also prepared by incorporating terephthaloyl chloride in the polymer backbone. The synthesized monomers and polymers were characterized by UV, FT‐IR and ¹H, ¹³C and ³¹P‐NMR spectroscopic techniques. The resulting polymers had inherent viscosities in the range of 0.15–0.51 dL/g and showed good solubility in polar organic solvents. The thermal properties of the polymers were studied by thermogravimetric analysis and differential scanning calorimetry under nitrogen atmosphere. The TGA data revealed that the 10% weight loss occurs at 275–320°C and all the synthesized polymers showed high char residues. DSC studies indicate that these polymers possess T_g in the range of 48 to 64°C. The photosensitive property of the polymers in film and solution state was investigated by ultraviolet spectroscopy. The effect of incorporation of terephthaloyl unit on photocrosslinking and thermal properties of the polymers was also studied.     

Soluble LC polyesters and their blend behavior

Poly(p-phenylene terephthalate) with substituents on the hydroquinone or on both monomer units were synthesized with the aim to obtain soluble LC polyesters. Focus was given to phenylalkyl substitution. With one phenylalkyl group in the repeating unit the polyesters are crystalline with melting points > 300°C. With two substituents the crystallinity is very low or the polymers are amorphous. These polyesters are soluble in chloroform forming isotropic solutions. Isotropic films of polyesters obtained from these solutions either crystallize or become anisotropic if heated above the glass transition temperature. The exponent in the Kuhn-Mark-Houwink equation is 0.95. Some of the polyesters form homogenous ternary solutions with polycarbonate. Films of the blends show additivity of modulus with respect to both components.     

Dynamic x-ray diffraction studies of liquid-crystalline polyesters

Mesophase transitions in liquid-crystalline (LC) polyesters were studied by dynamic x-ray diffraction using a synchrotron radiation source. Powder and fiber samples were examined by continuous heating from 50°C to 270°C in a hot stage. The polymer systems consisted of two types of thermotropic polyesters with mesogenic cores composed of combinations of substituted terephthalate, oxybenzoate and hydroquinone units combined with aliphatic spacers placed in the main chain. One of these samples was a chemically homogeneous LC polyester (HTH12) while the other LC polyester possessed chemical heterogeneity (BP6). BP6 could also be processed to form fibers which showed thermal transition behavior by x-ray diffraction and no detectable melting or clearing transition by thermal measurements. LC textures were observed using polarized light microscopy. Results of the dynamic x-ray diffraction studies of these two LC polymers are described.     

Fully aromatic thermotropic liquid crystalline polyesters of 3-phenyl-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic polyesters, derived from 3-phenyl-4,4′-biphenol (MPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various other comonomers was prepared by the melt polycondensation method and characterized for their thermotropic liquid crystalline behavior by a variety of experimental techniques. The homopolymer of MPBP with 4,4′-BDA had a fusion temperature (T_f) at 240°C, exhibited a nematic liquid crystalline phase, and had a narrow liquid crystalline range of 60°C. All of the copolyesters of MPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA) or 50 mol % terephthalic acid (TA), 2,6-naphthale-nedicarboxylic acid (2,6-NDA) and low T_f values in the range of 210–230°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 320–420°C, respectively. As expected, each of them had a broader range of liquid crystalline phase than the homopolymer. They had a “frozen” nematic, glassy order as determined with the wide-angle X-ray diffraction (WAXD) studies. The morphology of each of the “as-made” polyesters had a fibrous structure as determined with the scanning electron microscopy (SEM), which arises because of the liquid crystalline domains. Moreover, they had higher glass transition temperatures (T_g) in the range of 167–190°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 500–533°C, respectively. © 1995 John Wiley & Sons, Inc.     

Novel thermotropic esters‐based polymers with broad nematic processing windows

In this study, a new series of semiflexible liquid crystalline (LC) polyesters and poly(ester‐amide)s were synthesized and characterized. Polymers based on 4‐hydroxybenzoic acid (4‐HBA), 6‐hydroxy‐2‐naphthoic acid (HNA), suberic acid (SUA), and sebacic acid (SEA) were modified with hydroquinone (HQ) and different concentrations of 4‐acetamidophenol (AP) to obtain a polyester and two poly(ester‐amide)s, respectively. All polymers were successfully prepared using conventional melt‐condensation techniques. The polymers were characterized by inherent viscosity measurements, SEC, hot‐stage polarizing microscopy, DSC, and TGA. The mechanical behavior was investigated using DMTA and tensile testing. All linear polymers have T_gs in the range of 50–80 °C and melt between 120 and 150 °C. Our polymers display good thermooxidative stabilities (5% wt loss at ～ 400 °C) and exhibit homogeneous nematic melt behavior over a wide temperature range (ΔN ～ 250 °C). The liquid crystal phase was lost when high concentrations of nonlinear monomers such as 3‐HBA (>27 mol %) and resorcinol (RC) (>23 mol %) were incorporated. The LC polyester based on 4‐HBA/HNA/HQ/SUA/SEA could easily be processed into good quality films and fibers. The films display good mechanical properties (E′ ～ 4 GPa) and high toughness, that is, ～ 15% elongation at break, at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6565–6574, 2008     

Synthesis and Characterization of Soluble Polyester Based on Calixarene Dicarboxylic Acid with Tertiary Butyl Pendant Groups

A series of new polycalixesters(PCES) were synthesized by polyesterification of calixarene dicarboxylic acid derivatives having tertiary butyl pendant groups at the upper rim using five different diols. All polyesters were readily soluble in polar solvents such as NMP(N-methylpyrrolidone), DMF(dimethylformamide), DMSO(dimethylsulfoxide), pyridine, THF(tetrahydrofurane), HMPA(hexamethylenephosphoramide) and DMAC(dimethylacetamide). The PCES were also partially soluble in TCE(tetrachloroethane) and ethanol and they were unsoluble in aceton. The glass transition temperatures of polyesters were between 80-184 °C, the crystallinity temperatures of polyesters were between 130–212 °C and the melting temperatures of polyesters were between 185–234 °C, as determined by differential scanning calorimeter(DSC). The inherent viscosities of polyesters were obtained from 0.55 dL/mg to 0.61 dL/mg. The temperatures at 10% weight loss of polyesters ranged from 182 °C to 237 °C. The temperatures at 25% weight loss of polyesters ranged from 258 °C to 331 °C. The half weight loss(50%) temperatures of polyesters were among 315 °C to 371 °C and the char yields at 600 °C were determined within 13% to 22.3% in N2 atmosphere, as determined by thermo gravimetric analysis(TGA). The polyester, PES3, has the higher melting point(234 °C) and higher inherent viscosity(molecular weight) than the other polyesters.     

Synthesis and Evaluation of Some Novel Polymeric Surfactants Based on Aromatic Amines Used as Wax Dispersant for Waxy Gas Oil

Dicarboxy methyl ethoxylated aniline and 1,3‐dicarboxy methoxy benzene were synthesized as intermediate monomers to prepare six polyester surfactants. The first three of them were obtained by polyesterification of dicarboxy methoxy ethoxylated (EO=10) aniline with polyethylene glycol (M. wt.; 400, 600, 1000). The product named as An E₁₀ 400, An E₁₀ 600, and An E₁₀ 1000. The later three was obtained by polyesterification of 1, 3 dicarboxymethoxy benzene with the same PEG at different molecular weights. The product named as; R 400, R 600, and R 1000. These polyesters were characterized by FT.ir, and GPC. These polyesters were evaluated as pour point depressants of a mixed blend of Egyptian Western desert gas oil, (PP=18^oC). The obtained data showed that, the maximum reduction of pour point was obtained with An E₁₀ 1000 (ΔPP=15°C) and R 1000 (ΔPP=18°C) regarding to the two groups of polyesters respectively. Blends from these compounds were done. From the results, it was found that, the blend IV exhibit the maximum depression of pour point, (ΔPP=24°C). The photomicrographic investigation for the change of wax crystals morphology and size as the results of using the pour point dispersants was carried out after the treatment by the blends. The photomicrographic pictures showed a great modification of wax crystals was obtained as a result of dispersion of wax by the additives. The results were compared with a commercial additive at 1000 ppm. It was found that, its ΔPP=18°C. This work was extended to study the surface active properties of these polyesters at liquid/air interface. The obtained data were used to explain the discrepancy of these polyesters toward pour point depression.     

Synthesis,thermal, rheological characteristics,and enzymatic degradation of aliphatic polyesters with lignin‐based aromatic pendant groups

This research aims to produce lignin‐based biodegradable polyesters with improved thermal quality. A series of aliphatic polyesters with lignin‐based aromatic side groups were synthesized by conventional melt‐polycondensation. Decent molecular weight (21–64 kg mol^?1) was achieved for the polymerizations. The molecular structures and thermal and mechanical properties of the obtained polyesters were characterized. As a result, the obtained polyesters are all amorphous, and their glass‐transition temperature (T_g) depends on the size of the pendant aromatic group (31–51 °C). Furthermore, according to the TGA results, the thermal decomposition temperatures of the polyesters are all above 390 °C, which make them superior compared with commercial biodegradable polyesters like polylactic acid or polyhydroxyalkanoates. Finally, rheological characteristics and enzymatic degradation of the obtained polyesters were also measured. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2314–2323     

Aromatic polyesters containing cardo perhydrocumyl cyclohexylidene groups: Synthesis,characterization and gas permeation study

Three bisphenols containing cardo perhydrocumyl cyclohexylidene group, namely; 1,1-bis(4-hydroxyphenyl)-4-perhydrocumylcyclohexane, 1,1-bis(4-hydroxy-3-methylphenyl)-4-perhydrocumylcyclohexane and 1,1-bis(4-hydroxy-3,5-dimethylphenyl)-4-perhydrocumylcyclohexane were synthesized starting from p-cumyl phenol. Each of these bisphenols was polycondensed with both terephthaloyl chloride and isophthaloyl chloride by phase transfer-catalyzed interfacial polymerization to obtain a series of new aromatic polyesters. Inherent viscosities and number average molecular weights of polyesters were in the range 0.51-0.64 dL/g and 17390-41430?g/mol, respectively which indicated the formation of reasonably high molecular weight polymers. The detailed NMR studies revealed that axial and equatorial identity of the phenyl rings of bisphenols was retained in polyesters resulting in constitutional isomerism. Polyesters containing perhydrocumyl cyclohexylidene groups showed excellent solubility in organic solvents viz, chloroform, dichloromethane, 1,1,2,2-tetrachloroethane and tetrahydrofuran. The self-standing films of polyesters could be cast from their chloroform solution. The 10% weight loss temperatures and glass transition temperatures of polyesters were in the range 453–485?°C and 201–267?°C, respectively demonstrating their excellent thermal characteristics. The gas permeability study of polyesters was carried out for He, H₂ and N₂ by variable-volume method. An improvement in permeability and decrease in selectivity was observed due to symmetric methyl substituents while reverse trend was observed in case of polyesters with asymmetric methyl substituents.     

Synthesis and characterization of polyesters derived from sebacic acid,hexanediol, and hydroquinone

Oils and fats derived from animals and plants provide a good renewable source for polymer precursors. In this investigation, fatty acids derived from plant oils and diols were used as monomers to produce polyesters by melt polycondensation. Sebacic acid, hexanediol, and hydroquinone were used as precursors in the polymer synthesis. The polymers were characterized by gel permeation chromatography, Fourier transform infrared spectroscopy, three-bending point flexural test, X-ray diffraction, tensile testing, and contact angle. The resulting polyesters were blended with epoxies to create materials with an increased elongation at break without affecting other mechanical properties.     

Synthesis of polyester having pendent hydroxyl groups via regioselective dehydration polycondensations of dicarboxylic acids and diols by low temperature polycondensation

In this article, we describe the one‐step synthesis of polyesters having pendent hydroxyl groups by Lewis acid‐catalyzed, regioselective, dehydration polycondensations of diols (glycerol and sorbitol) and dicarboxylic acids [tartaric acid (TA) and malic acid (MA)] containing pendent hydroxyl groups, using low temperature polycondensation technique. Direct polycondensations of TA or MA and 1,9‐nonanediol catalyzed by scandium trifluoromethanesulfonate [Sc(OTf)₃] successfully yielded linear polyesters having hydroxyl functionality (M_n = ca. 1.0 × 10⁴). To demonstrate the reactivity of the pendent hydroxyl group, a glycosidation was performed. Poly(nonamethylene L ‐malate) showed significant higher biodegradability, compared with poly(nonamethylene L ‐tartrate) or poly(nonamethylene succinate). Stable poly(nonamethylene L ‐tartrate) emulsion could be prepared using poly(vinyl alcohol) as the surfactant, although emulsions consisting of poly(nonamethylene succinate) were unstable and phase‐separated within a few days. Furthermore, direct polycondensations of TA and diethylene glycol (DEG) or triethylene glycol (TEG) successfully produced water‐soluble polyesters having hydroxyl groups. This new polycondensation system may be extremely effective not only for advanced material design using functional monomers but also for effective utilization of biomass resources as chemical substances. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5747–5759, 2009     

Influence of chemical structure on physicochemical properties and thermal decomposition of the fully bio-based poly(propylene succinate-co-butylene succinate)s

In this work, two polyesters and four copolyesters were studied. All materials were synthesized to obtain the monomers dedicated for thermoplastic polyurethane elastomers. For this type of PUR, the monomers should characterize by appropriate selected physicochemical properties and macromolecular structure distribution, which depends on synthesis conditions. The study of chemical structure with extensive and knowledgeable analysis of formed macromolecules of synthesized bio-based copolyesters was conducted with the use of FTIR and ¹H NMR spectroscopy and MALDI-ToF mass spectrometry. The results allowed to propose the majority of probable chemical structures of macromolecules formed during synthesis. Moreover, the impact of the structure on the thermal stability of the obtained copolyesters was also determined with the use of thermogravimetric analysis. The temperature of the beginning of thermal decomposition equaled even 330 °C. Furthermore, the results of DSC-TG/QMS coupled method confirmed that all prepared polyesters degraded by α and β-hydrogen bond scission mechanisms.     

Thermotropic liquid-crystalline copolyesters containing substituted phenylene terephthalate and ethylene terephthalate units

Three series of aromatic, thermotropic copolyesters, based on terephthalic acid (TA), ethylene glycol (EG), and another diol were prepared. The third monomer was selected from three different hydroquinones including, ethoxyhydroquinone (EHQ), phenylhydroquinone (PHQ), and hydroquinone itself (HQ). The amounts of the different hydroquinone terephthalate units were varied while the amounts of ethylene terephthalate units remained constant. The copolymers and terpolymers were characterized for solubility, for morphology by polarized light microscopy (PLM), for molecular weight by solution viscometry, and by NMR, DSC, and TGA. At elevated temperatures all samples, when observed by PLM, displayed the characteristic texture of a nematic phase. The melting transition temperatures, T_m, were found to vary from 255 to 325°C, while the 5 wt % loss temperatures, T_d, were found to vary from 330 to 440°C. The inherent viscosities varied from 0.6 to 1.9 dL/g. Increases in the HQ monomer content caused a decreased solubility and an increase in melting point. Copolymer compositions determined by NMR showed that only about one-half of the EG added was incorporated into the copolymers. © 1997 John Wiley & Sons, Inc.