Fully aromatic liquid crystalline homopolyesters and copolyesters of 1,1′-binaphthyl-4,4′-diol

A series of fully aromatic, thermotropic polyesters based on 1,1′-binaphthyl-4,4′-diol, BND, was prepared by the melt polycondensation method and characterized for their thermotropic behavior by a variety of experimental techniques. The homopolymer of BND with terephthalic acid formed a nematic melt at 353°C. In contrast, the polyester from BND and 2,6-naphthalenedicarboxylic acid had a melting transition, T_m, above 400°C, so it was not possible with the equipment available to determine whether it formed a nematic melt. All of the copolymers of BND formed nematic melts at much lower T_m values than those of its respective homopolymers, as expected, because of the copolymerization effect of the added monomer. Moreover, all of the copolymers had higher glass transition temperatures, T_g, than those of other liquid crystalline polyesters and higher thermal stabilities. © 1994 John Wiley & Sons, Inc.     

Wholly aromatic thermotropic liquid crystalline polyesters of 4,4′-biphenol,substituted biphenols,and 1,1′-binaphthyl-4,4′-diol with 3,4′-benzophenone dicarboxylic acid

Wholly aromatic, thermotropic homopolyesters, derived from 4,4′-biphenol, substituted biphenols, or 1,1′-binaphthyl-4,4′-diol and 3,4′-benzophenone dicarboxylic acid, and two copolyesters, each of which contained 30 mol % of 6-hydroxy-2-naphthoic acid, were prepared by acidolysis polycondensation reactions and characterized for their liquid crystalline properties. The solubility behavior of these polymers has also been investigated. The two homopolymers of phenyl-substituted biphenols with 3,4′-benzophenone dicarboxylic acid were soluble in many common organic solvents. All of the homopolymers had lower T_m/T_f values than those with terephthalic acid, which was attributed to the incorporation of the asymmetric 3,4′-benzophenone dicarboxylate units in a head-to-head and head-to-tail fashion along the polyester chain. Two copolymers had lower T_m values than those of the respective homopolymers, as expected. They formed nematic phases which persisted up to 400°C, except those of phenyl-substituted biphenols with 3,4′-benzophenone dicarboxylic acid. Each of these two polymers also exhibited an accessible T_i transition, and had a broad range of LC phase. They had glass transition temperatures, T_g, in the range of 139-209°C and high thermal stabilities in the temperature range of 465-511°C. © 1995 John Wiley & Sons, Inc.     

Fully aromatic thermotropic liquid crystalline homopolyesters of 3,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic homopolyesters, derived from 3,4′-benzophenone dicarboxylic acid and various aromatic diols, was prepared by the melt polycondensation method and examined for thermotropic behavior by a variety of experimental techniques. The aromatic diols used in the study were hydroquinone, 2,6-, 1,4-, 1,5-, 2,3-, and 2,7-naphthalenediol isomers. All of the homopolyesters of 3,4′-benzophenone dicarboxylic acid with aromatic diols (except that with 2,7-naphthalenediol) formed a nematic LC phase in the melt. They had the glass transition temperatures (T_g) in the range of 133–164°C, the melting transitions (T_m) in the range 305–360°C and the high thermal stabilities (T_d) in the range of 410–483°C. The 2,6-naphthalenediol based homopolymer had the highest T_m (360°C) and the 2,3-naphthalenediol based homopolymer had the lowest T_m (305°C) among all of the homopolymers of naphthalenediol isomers. © 1994 John Wiley & Sons, Inc.     

Fully aromatic thermotropic liquid crystalline polyesters of 3-phenyl-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic polyesters, derived from 3-phenyl-4,4′-biphenol (MPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various other comonomers was prepared by the melt polycondensation method and characterized for their thermotropic liquid crystalline behavior by a variety of experimental techniques. The homopolymer of MPBP with 4,4′-BDA had a fusion temperature (T_f) at 240°C, exhibited a nematic liquid crystalline phase, and had a narrow liquid crystalline range of 60°C. All of the copolyesters of MPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA) or 50 mol % terephthalic acid (TA), 2,6-naphthale-nedicarboxylic acid (2,6-NDA) and low T_f values in the range of 210–230°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 320–420°C, respectively. As expected, each of them had a broader range of liquid crystalline phase than the homopolymer. They had a “frozen” nematic, glassy order as determined with the wide-angle X-ray diffraction (WAXD) studies. The morphology of each of the “as-made” polyesters had a fibrous structure as determined with the scanning electron microscopy (SEM), which arises because of the liquid crystalline domains. Moreover, they had higher glass transition temperatures (T_g) in the range of 167–190°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 500–533°C, respectively. © 1995 John Wiley & Sons, Inc.     

Fully aromatic thermotropic liquid crystalline polyesters of substituted 4,4′-biphenols. IV. Homopolyesters with terephthalic acid and copolyesters with terephthalic acid and 4-hydroxybenzoic acid

A series of fully aromatic thermotropic polyesters based on mono-, di-, and tetra-substituted biphenols was prepared by the melt polycondensation method and examined for their thermotropic behavior by a variety of experimental techniques. The homopolyesters obtained from substituted biphenols containing either one phenyl or two phenyl groups as substituent(s) and TA formed nematic melts, but the homopolymers of the substituted biphenols containing either four sec-butyl groups or two tert-butyl groups with TA had melting transitions, T_m, above 400°C. Thus, it was not possible to determine whether they formed nematic melts. On copolymerization with 30 mol % HBA most of the resulting copolyesters had much lower T_m values, compared to those of respective homopolyesters, and the copolymers of the biphenol monomer containing the tert-butyl groups formed a nematic melt at an observable temperature. However, the copolymer of the biphenol with sec-butyl groups still had a T_m above 400°C. © 1993 John Wiley & Sons, Inc.     

Wholly aromatic thermotropic liquid crystalline polyesters of 3,3′-bis(phenyl)-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of wholly aromatic, thermotropic polyesters, derived from 3,3′-bis(phenyl)-4,4′-biphenol (DPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various linear comonomers, were prepared by the melt polycondensation reaction and characterized for their thermotropic properties by a variety of experimental techniques. The homopolymer of DPBP with 4,4′-BDA had a fusion temperature (T_f) at 265°C, exhibited a nematic phase, and had a liquid crystalline range of 105°C. All of the copolyesters of DPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA), or 50 mol % terephthalic acid (TA), 2,6-naphthalenedicarboxylic acid (2,6-NDA) had low T_f values in the range of 220–285°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 270–420°C, respectively. Their accessible T_i values would enable one to observe a biphase structure. Each of the copolymers with HBA or HNA had a much broader range of liquid crystalline phase. In contrast, each of the copolymers with TA or 2,6-NDA had a relatively narrow range of liquid crystalline phase. Each of these polyesters had a glassy, nematic morphology that was confirmed with the DSC, PLM, WAXD, and SEM studies. As expected, they had higher glass transition temperatures (T_g) in the range of 161–217°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 494–517°C, respectively. Despite their noncrystallinity, they were not soluble in common organic solvents with the exception that the homopolymer and its copolymer with TA had limited solubility in CHCl₃. However, they were soluble in the usual mixture of p-chlorophenol/1,1,2,2-tetrachloroethane (60/40 by weight) with the exception of the copolymer with 2,6-NDA. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 769–785, 1997     

Fully aromatic thermotropic liquid crystalline polyesters of 3,4′-dihydroxybenzophenone

A series of fully aromatic, thermotropic polyesters, derived from 3,4′-dihydroxybenzophenone and various aromatic dicarboxylic acids, was prepared by the high-temperature solution polycondensation method and examined for thermotropic behavior by a variety of experimental techniques. The aromatic dicarboxylic acids used in this study were 2,6-naphthalenedicarboxylic acid, 4,4′-bibenzoic acid, and terephthalic acid. The two homopolymers of 3,4′-DHB with either 2,6-NDA or 4,4′-BBA formed nematic LC phases at 285°C and 255°C and also exhibited isotropization transitions (T_i) at 317°C and 339°C, respectively. The copolymer of 3,4′-DHB with 50% TA and 50% 2,6-NDA also formed a nematic LC phase and had a broader range of LC phase than that of its respective homopolymers. Two other copolymers of 3,4′-DHB, both containing 50% 4,4′-BBA, also formed nematic LC phases at low T_f values. All of the thermotropic polyesters had high thermal stabilities. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of a series of wholly aromatic copolyesters containing 2‐(α‐phenylisopropyl)hydroquinone moiety

Two series of new wholly aromatic thermotropic copolyesters containing the 2‐(α‐phenylisopropyl)hydroquinone (PIHQ) moiety have been synthesized and their basic properties such as glass transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity were studied by differential scanning calorimetry (DSC), thermogravimetry (TG), and wide‐angle X‐ray diffractometry (WAXD) and on a polarizing microscope. The first series was prepared from acetylated PIHQ, terephthalic acid (TPA), and 2,6‐naphthalenedicarboxylic acid (NDA), and the second series from acetylated PIHQ, TPA, and 1,1′‐biphenyl‐4,4′‐dicarboxylic acid (BDA). The T_g values (152–168°C) of the two series are not much different, although the values for the first series appear slightly higher. The T_m values (287–378°C) and the degree of crystallinity of the first series are appreciably greater than those of the second series. Such differences can be explained by the geometric structure of NDA and BDA moieties. All of the present polyesters are thermotropic and nematic. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 881–889, 1999     

Wholly aromatic thermotropic liquid crystalline polyesters of 2-(α-phenylisopropyl)hydroquinone; copolymers with 1,1′-biphenyl-4,4′-diol and 2,6-dihydroxynaphthalene

Two series of new aromatic copolyesters have been synthesized and their properties including liquid crystallinity have been studied. The first series was synthesized by polymerizing mixtures of diacetates of 2-(α-phenylisopropyl)hydroquinone and 1,1′-biphenyl-4,4′-diol with terephthalic acid, and the second by polymerizing mixtures of diacetates of 2-(α-phenylisopropyl)hydroquinone and 2,6-dihydroxynaphthalene with terephthalic acid. These polyesters were characterized by differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffractomerty, and optical microscopy. The glass transition temperatures of the first series decrease from 167 to 138°C as one increases the content of the 1,1′-biphenyl-4,4′-diol unit to 50 mol %. The T_g values of the second series are slightly higher than those of the first series, and appear to be less dependent on their composition. The degree of crystallinity of the first series decreases rapidly by copolymerization, much faster than that of the second series. The melting points of the first series copolymers are significantly lower than those of the second series. All of the copolyesters reported in this investigation form nematic melts. The initial decomposition temperatures of the copolymers were higher than 450°C. It was confirmed that thermal stability of the homopolyester, PIBPL-1.00, containing the isopropylidene units is significantly improved when compared with that carrying benzylic hydrogens. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2777–2786, 1997     

Synthesis and characterization of wholly aromatic polyesters derived from 1-phenyl-2,6-naphthalene-dicarboxylic acid and aromatic diols

A series of new wholly aromatic polyesters was synthesized by melt polycondensation of 1-phenyl-2,6-naphthalenedicarboxylic acid (PNDA) and diacetates of various aromatic diols. The aromatic diols studied are hydroquinone (HQ), methylhydroquinone (MHQ), phenylhydroquinone (PHQ), (α-phenylisopropyl)hydroquinone (PIHQ), 2,6-naphthalenediol (2,6-ND), 1,4-naphthalenediol (1,4-ND), and 4,4′-biphenol (BP). These polyesters were characterized for their crystallinity, glass transition temperature (T_g), melting temperature (T_m), liquid crystallinity, and thermal stability. In general, crystallinity of the polyesters are very low and the T_g values of the polyesters range from 150 to 172°C depending on the structure of aromatic diols. All of the polymers formed nematic phases above their T_m or T_g. The polyesters derived from PHQ and PIHQ are soluble in chlorinated hydrocarbon solvents. The initial decomposition temperatures of the polyesters are above 400°C under N₂ atmosphere. © 1996 John Wiley & Sons, Inc.     

Hydroxy-terminated poly(ε-caprolactone-co-δ-valerolactone) oligomers: Synthesis,characterization, and polyurethane network formation

Difunctional hydroxy-terminated poly(ε-caprolactone-co-ε-valerolactone) (PCV) oligomers were synthesized by the diol-initiated bulk copolymerization of ε-caprolactone (C) and δ-valerolactone (V). The two homopolymers were semicrystalline, with almost identical melting temperatures; copolymerization significantly lowered the melting point (T_m) compared to either homopolymer. Copolymer melting points were found to decrease with decreasing molecular weight and to be dependent on composition, i.e., the incorporation of a comonomer into either homopolymer resulted in a decrease in T_m, with the maximum decrease occurring at a copolymer composition of about 60 mol % ε-caprolactone. The molar compositions of the copolyesters were determined from ¹³C-NMR spectra. The reactivity ratios of the two monomers (M₁ = C, M₂ = V) were determined to the r₁ = 0.25 and r₂ = 0.49. Number average molecular weight (M?_n) of the PCV diols was inversely proportional to the initial diol concentration within the studied molecular weight range of 900 to 11,100 g/mol. Crosslinked polyurethane networks were prepared by reacting PCV diols with triphenylmethane triisocyanate. Network characterization included determination of sol content by solvent extraction, glass transition (T_g) and T_m by DSC, and tensile properties by stress-strain measurements. Completely amorphous networks resulted from PCV diols of M?_n ≤ 2,400; semicrystalline networks resulted from PCV diols of M?_n ≥ 3,600.     

Synthesis and polymerization of 8,9-benzo-2-methylene-1,4,6-trioxaspiro[4,4]nonane (BMTN)

8,9-Benzo-2-methylene-1,4,6-trioxaspiro[4,4]nonane (BMTN) was prepared by the reaction of phthalide with epichlorohydrin, followed by dehydrochlorination. BMTN was polymerized with di-t-butyl peroxide (DTBP) to give a solyble polymer with a high molecular weight and good thermal stability. The infrared (IR) and nuclear magnetic resonance (NMR) spectra indicated that the polymer structure contained aromatic ester and ketone in the backbone. T_g and T_m of homopolymer of BMTN were, respectively, 98 and 282°C. BMTN was also readily copolymerized with such vinyl monomers as methyl methacrylate (MMA), acrylonitrile (AN), and maleic anhydride (MA), but not with styrene, in the presence of radical initiators. AN and MA, in particular, were spontaneously copolymerized with BMTN in the absence of radical initiators at 40°C. From the results of ultra violet (UV) spectra it is suggested that spontaneous copolymerization proceeds via a charge-transfer complex between BMTN as an electron donor and AN or MA as an acceptor.     

Synthesis and properties of aramids and polyarylates having perfluoro-substituents on the benzene ring

A new series of 16 aramids and 16 polyarylates having perfluoro-substituents on the benzene ring was prepared by a low temperature solution or an interfacial polycondensation. The effects of fluorine substituents on the structure and properties of polymers were examined. Fluorinated aramids exhibited higher crystallinity, while fluorinated polyarylates show lower crystallinity. The melting point (T_m) of aramids decreased with fluorine substitution, whereas T_m of polyarylates from fluorinated aromatic diols was higher than that of those from unfluorinated ones. The temperature of 10% weight loss and the residue at 900°C decreased with fluorine substitution except for the aramids from fluorinated diamines. Solubility and contact angle also increased with fluorine substitution. Some polyarylates were found to exhibit an optical anisotropy.     

Thermotropic liquid‐crystalline polyesters of 4,4′‐biphenol and phenyl‐substituted 4,4′‐biphenols with 4,4′‐oxybisbenzoic acid

A series of thermotropic polyesters, derived from 4,4′‐biphenol (BP), 3‐phenyl‐4,4′‐biphenol (MPBP), and 3,3′‐bis(phenyl)‐4,4′‐biphenol (DPBP), 4,4′‐oxybisbenzoic acid (4,4′‐OBBA), and other aromatic dicarboxylic acids as comonomers, were prepared by melt polycondensation and were characterized for their thermotropic liquid‐crystalline (LC) properties with a variety of experimental techniques. The homopolymer of BP with 4,4′‐OBBA and its copolymers with either 50 mol % terephthalic acid or 2,6‐naphthalenedicarboxylic acid had relatively high values of the crystal‐to‐nematic transition (448–460 °C), above which each of them formed a nematic LC phase. In contrast, the homopolymers of MPBP and DPBP had low fusion temperatures and low isotropization temperatures and formed nematic melts above the fusion temperatures. Each of these two polymers also exhibited two glass‐transition temperatures, which were associated with vitrified noncrystalline (amorphous) regions and vitrified LC domains, as obtained directly from melt polycondensation. As expected, they had higher glass‐transition temperatures (176–211 °C) than other LC polyesters and had excellent thermal stability (516–567 °C). The fluorescence properties of the homopolymer of DPBP with 4,4′‐OBBA, which was soluble in common organic solvents such as chloroform and tetrahydrofuran, were also included in this study. For example, it had an absorption spectrum (λ_max = 259 and 292 nm), an excitation spectrum (λ_ex = 258 and 292 nm with monitoring at 350 nm), and an emission spectrum (λ_em = 378 nm with excitation at 330 nm) in chloroform. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 141–155, 2002     

Preparation of HPEEK by Oligomer A2+B3 Approach

A series of hyperbranched poly(ether ether ketones) with different chain length between branching point (L) were prepared using a A₂+B₃ methodology, in which the A₂ is hydroxyl‐terminated PEEK oligomer. The L affects the properties of the polymers such as the inherent viscosity, the degree of crystallinity, the thermal properties of the polymers etc. The polymer with a L₂≈8 had T _g (122.4°C), T _c (200.2°C), and broad T _m (247.4°C). With the increment of L, up to the point L₂≈20 and L₂≈35, the polymers become semi‐crystalline, with a melting point of 300.9°C and 317.9°C, respectively. Their wide angle X‐ray scattering (WAXS) pattern indicated that their crystal structure is exactly the same as that of the linear homopolymer.     

Synthesis,liquid crystallinity,and mechanical properties of thermotropic polyquinolines

Thermotropic liquid-crystalline polyquinolines with high molecular weights, i.e., poly[2,2′-(α,ω-dioxyphenylene (or -dioxybiphenylene) alkane)-6,6′-(4,4′-dioxybiphenyl)-bis(4-phenylquinoline)]s (P-H-B1Mns or P-H-B2Mns), were synthesized by polycondensation of 4,4′-bis(4-amino-3-benzoylphenoxy)biphenyl and α,ω-bis(4-acetophenoxy (or -acetobiphenoxy))alkanes. For P-H-B1Mn series, the T_m and T_i were in the range of 129–230°C and 156–254°C, respectively, while for the P-H-B2Mn series, those were 182–275°C and 217–309°C, respectively. The introduction of both the dioxybiphenylene group and an alkylene spacer induced thermotropic liquid crystallinity in the polyquinoline, although the introduction of the alkylene spacer alone did not induce it. In addition, polyquinolines substituted with methyl, methoxy, and chloro groups exhibited larger mesophase temperature ranges as well as higher T_ms and T_is than the unsubstituted ones. Tensile strengths of these thermotropic polyquinolines were considerably high in the range of 770 to 1170 kgf/cm². © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 749–759, 1998     

Synthesis of thermotropic LCPs using p‐methoxycarbonyloxy aromatic acids

4‐Methoxycarbonyloxybenzoic acid (MCOBA) and 6‐methoxycarbonyloxy‐2‐naphthoic acid (MCONA) were synthesized as new monomers to replace 4‐acetoxybenzoic acid (ABA) and 6‐acetoxy‐2‐naphthoic acid (ANA) in the synthesis of liquid crystal polymers. MCOBA and MCONA (73 : 27, mol : mol) were reacted at temperatures ranging from 220 to 325°C in bulk. The copolymer (M_w = 14,200) has a T_g (90°C) and a T_m (249°C). The MCOBA/MCONA copolymer is lighter in color than the ABA/ANA copolymer. During the copolymerization, six by‐products were collected, isolated, and analyzed, and their formation was investigated. The copolymerization rate was studied by the measurement of evolved carbon dioxide. The polymerization of MCOBA and MCONA is cleaner and faster than the polymerization of ABA and ANA. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1703–1707, 1999     

Thermotropic copolyesters having ordered comonomer sequences and flexible spacers

A series of new copolyesters having ordered comonomer sequences were synthesized via multistep routes and their properties such as glass transition (T_g) and melting temperatures (T_m), crystallization tendency, and mesomorphic properties were compared with those of the corresponding random copolyesters. All of the present copolyesters contain 1,8-octamethylene or 1,10-decamethylene spacers and hydroquinone (HQ) and terephthalic acid (TPA) moieties. In general, both melting and clearing temperatures of the ordered sequence copolyesters were much higher than those of the random counterparts. Crystallization tendency, however, was comparable. All of the present copolyesters are thermotropic and form nematic phase in melts. © 1993 John Wiley & Sons, Inc.     

含二苯并-18-冠-6酰胺型液晶冠醚钾配合物的合成和性质

合成了2个系列酰胺型液晶冠醚钾配合物，配合物的结构通过元素分析、IR、UV-Vis和AAS等方法表征。液晶行为通过DSC、POM、XRD等方法表征。实验结果表明，所有配合物均具有热致液晶性，且随分子末端烷氧基碳原子数增加，其熔点和清亮点呈规律性变化。与配体相比，配合物液晶态温度范围变宽。液晶相态类型发生改变，配体只有近晶相，而配合物既有近晶相，又有向列相。     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.