Synthesis and characterization of new aromatic polyesters and a polyether derived from 2,2-bis(4-hydroxyphenyl)-1,2-diphenylethanone

New polyarylates having benzopinacolone units were synthesized from 2,2-bis(4-hydroxyphenyl)-1,2-diphenylethanone and aromatic dicarboxylic acid chlorides. The polymers having an inherent viscosity of 0.71–0.94 dL/g were obtained by the two-phase method using toluene as an organic solvent. The polymers were easily soluble in various organic solvents and had high glass transition temperatures in the range of 200–240°C. An aromatic polyether having benzopinacolone unit was also prepared. However, its inherent viscosity was low because of the occurrence of a side reaction. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2229–2235, 1998     

Synthesis and characterization of novel polyarylates from 2,5-bis(4-hydroxyphenyl)-3,4-diphenylpyrrole and various aromatic dicarboxylic acids

A new tetraphenylated heterocylic diol, 2,5-bis(4-hydroxyphenyl)-3,4-diphenylpyrrole, was synthesized in three steps starting from 4-methoxydeoxybenzoin. The tetraphenylpyrrole-containing polyarylates having inherent viscosities of 0.28–0.88 dL/g were prepared from the diol and various aromatic dicarboxylic acid chlorides by both phase transfer catalyzed two-phase polycondensation and high temperature solution polymerization methods. All the polyarylates were semi-crystalline, and were readily soluble in a variety of solvents including N-methyl-2-pyrrolidone, m cresol, pyridine, and 1,4-dioxane. These polymers had glass transition temperatures in the range of 223–279°C, with no weight loss below 400°C in both air and nitrogen atmospheres. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of new fluorinated polyarylates derived from 1,1-bis(4-hydroxyphenyl)-1-phenyl-2,2,2-trifluoroethane and aromatic diacid chlorides

A new series of fluorine-containing polyarylates were synthesized by interfacial or high-temperature solution polymerization of 1,1-bis(4-hydroxyphenyl)-1-phenyl-2,2,2-trifluoroethane with six aromatic diacyl chlorides. These polyarylates had inherent viscosities ranging from 0.47 to 1.37 dl/g that corresponded to weight-average and number-average molecular weights (by gel permeation chromatography) of 35,800-72,400 and 30,700-67,700, respectively. All polymers were highly soluble in a variety of solvents, and could afford tough, transparent, and colorless films via solution casting. The glass-transition temperatures of the polymers ranged from 209 to 271 °C. All of them did not show significant decomposition below 450 °C in both nitrogen and air atmospheres.     

Synthesis and characterization of aromatic polythiazole-amides from new aromatic diamines containing phenyl-pendant thiazole units

New aromatic diamines containing phenyl-pendant thiazole units were synthesized in three steps starting from p-nitrobenzyl phenyl ketone. Novel aromatic polyamides containing phenyl-pendant thiazole units were prepared by the low-temperature solution polyconden-sation of 1,4- (or 1.3-) bis[5-(p-aminophenyl)-4-phenyl-2-thiazolyl] benzene with various aromatic dicarboxylic acid chlorides in N,N-dimethylacetamide. High molecular weight polyamides having inherent viscosities of 0.5–3.0 dL/g were obtained quantitatively. The polythiazole-amides with m-phenylene, 4,4′-oxydiphenylene, and 4,4′-sulfonyldiphenylene units were soluble in N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and pyridine, and gave transparent flexible films by casting from the solutions. These organic solvent-soluble polyamides displayed prominent glass transition temperatures (T_g) between 257 and 325°C. On the other hand, the polythiazole-amides with p-phenylene and 4,4′-biphenylene units were insoluble in most organic solvents, and had no observed T_g. All the polythiazole-amides started to decompose at about 400°C with 10% weight loss being recorded at 450–525°C in air. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of new soluble polyamides derived from 2,6-bis(4-aminophenyl)-3,5-dimethyltetrahydro-4H-pyran-4-one

A new oxypyrone diamine, 2,6-bis(4-aminophenyl)-3,5-dimethyltetrahydro-4H-pyran-4-one (DAPP), was prepared from 4-nitrobenzaldehyde and 3-oxa-n-pentane in a two-step reaction with a high yield and a high purity. Aromatic polyamides were obtained from this novel condensation monomer and several diacid chlorides through the conventional low-temperature solution method in N,N-dimethylacetamide. Polycondensation results were consistent with a high reactivity for DAPP because high yields and high molecular weight polyamides were obtained with inherent viscosities up to 1.8 dL/g. The reactivity of DAPP was also estimated with theoretical calculations from computer programs for molecular simulation, with orbital and charge factors considered. The polymers showed improved solubility in organic solvents, relative to conventional wholly aromatic polyamides, and high glass-transition temperatures (from differential scanning calorimetry) over 270 °C. However, the thermal resistance, as estimated by thermogravimetric analysis, was lower than that of conventional aromatic polyamides; nevertheless, decomposition temperatures well beyond 300 °C were observed in nitrogen and air. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1825–1832, 2001     

Synthesis and characterization of new polyamides derived from 1,6-bis[4-(4-aminophenoxy)phenyl]diamantane

A series of new polyamides 3 were synthesized by direct polycondensation of the 1,6-bis[4-(4-aminophenoxy)phenyl]diamantane (1) with various dicarboxylic acids. The polyamides had inherent viscosities of 0.45–1.90 dL/g and number-average molecular weights (M_n) of 24,000–110,000. Dynamic mechanical analysis (DMA) reveals that polymers 3 have two relaxations on the temperature scale between −100 and 400°C. Their α relaxations occurred at high temperatures, ranging from 338 to 389°C. Moreover, these polymers remained quite stable at high temperatures and maintained good mechanical properties (G′ = ca. 10⁸ Pa) up to temperatures close to the main transition markedly exceeding 350°C. Due to the bulky diamantane elements and the flexible ether segments, the polymers 3 were amorphous and soluble in a number of organic solvents such as pyridine, N-methyl-2-pyrrolidone (NMP), and N,N-dimethylacetamide (DMAc). The polyamides 3 have tensile strengths of 56.7–90.2 MPa, elongation to breakage values of 7.5–27.7%, and initial moduli of 1.8–2.1 GPa. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2185–2192, 1998     

Synthesis and characterization of new soluble aromatic polyimides from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and aromatic tetracarboxylic dianhydrides

Novel aromatic polyimides containing tetraphenylpyrrole unit were synthesized from 3,4-bis(4-aminophenyl)-2,5-diphenylpyrrole and various aromatic tetracarboxylic dianhydrides by the usual two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polymers had inherent viscosities in the 0.20–0.65 dL/g range and were practically amorphous as shown by the X-ray diffraction studies. All the polyimides except for polypyromellitimide were easily soluble in a wide range of organic solvents such as o-chlorophenol, pyridine, 1,3-dimethyl-2-imidazolidone, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone at room temperature. These polyimides had high glass transition temperatures of 302–359°C and exhibited 10% weight loss at temperatures above 510°C in nitrogen.     

Synthesis and characterization of aromatic polyamides from 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diacid chlorides

Novel, soluble aromatic polyamides and copolyamides containing tetraphenylethylene units were prepared by the low temperature solution polycondensation of 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diamines with various aromatic diacid chlorides. Highmolecular-weight polyamides having inherent viscosities of 0.6–1.5 dL/g and number-average molecular weight above 21000 were obtained quantitatively. These polymers were readily soluble in various solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), and dimethyl sulfoxide and gave pale yellow, transparent, flexible films by casting from DMAc solution. The polymers had glass transition temperatures between 290 and 340°C, and started to lose weight around 400°C, with 10% weight loss being recorded at about 470°C in air.     

Synthesis and characterization of new soluble aromatic polyimides from diaminotetraphenylimidazolinone and aromatic tetracarboxylic dianhydrides

A series of new soluble aromatic polyimides with inherent viscosities of 0.65–1.12 dL/g were synthesized from 1,3-bis(4-aminophenyl)-4,5-diphenylimidazolin-2-one and various aromatic tetracarboxylic dianhydrides by the conventional two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polyimides could also be prepared by the one-pot procedure in homogeneous m-cresol solution. Most of the tetraphenyl-pendant polyimides were soluble in organic solvents such as N,N-dimethylacetamide, 1,3-dimethyl-2-imidazolidone, and m-cresol. Some polyimides gave transparent, flexible, and tough films with good tensile properties. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyimides were in the range of 287–326 and 520–580°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1767–1772, 1998     

Synthesis and characterization of soluble aromatic polyurea-amides from new N,N′--dimethyl-N,N′-bis(aminophenyl)ureas and aromatic dicarboxylic acid chlorides

Aromatic polyurea-amides having inherent viscosities of 0.36–0.67 dL/g were synthesized by the low temperature solution polycondensation of new N,N′-dimethyl-N,N′-bis(aminophenyl)ureas with various aromatic dicarboxylic acid chlorides. All the polymers were amorphous, and most of them were soluble in a variety of organic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), m-cresol, and pyridine. Some of the polymers could be cast from the DMAc solutions into transparent and flexible films having good tensile properties. The glass transition temperatures of the polyurea-amides obtained from the bis(4-aminophenyl)-substituted ureas were 244–272°C. The temperatures of 10% weight loss under nitrogen of the polymers were in the range of 430 and 480°C. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of novel polyesters derived from 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines and various aromatic diols

A new class of aromatic polyesters containing pyridine heterocyclic rings (PE_1-15) was prepared via reactions of 4-aryl-2,6-bis(4-chlorocarbonyl phenyl) pyridines (DAC_1-3) and commercial diols by high temperature solution polymerization method in o-dichlorobenzene and catalytic amount of triethylamine hydrochloride. The optimum condition of polymerization was obtained via study of a model compound prepared from reaction of 4-phenyl-2,6-bis(4-chlorocarbonylphenyl) pyridine (DAC₁) and phenol. All polymers were characterized by FTIR and ¹H-NMR spectroscopies, and their physical properties including solution viscosity, solubility properties, thermal stability and thermal behavior were studied. The prepared polyesters showed excellent thermal stability and good solubility in polar aprotic solvents.     

Synthesis and characterization of novel polyarylates from 2,5-bis(4-hydroxyphenyl)-3,4-diphenylfuran and aromatic diacid chlorides

New tetraphenylated heterocyclic diol, 2,5-bis(4-hydroxyphenyl)-3,4-diphenylfuran, was synthesized by the oxidative coupling of 4-methoxydeoxybenzoin as a starting material, followed by simultaneous cyclodehydration and demethylation. Tetraphenylfuran-containing polyarylates with inherent viscosities of 0.2–0.7 dL/g were prepared from various diacid chlorides by both solution polycondensation and phase transfer catalyzed two-phase polymerization methods. All the polymers were easily soluble in dichloromethane, o-chlorophenol, 1,4-dioxane, pyridine, and N-methyl-2-pyrrolidone and showed semicrystalline patterns as evidenced by the X-ray diffraction studies. These polyarylates have glass transition temperatures in the range of 222–236°C and 10% weight loss was observed above 430°C in both air and nitrogen.     

Preparation and properties of new random and block copolyamides derived from 1,3-bis(3-aminopropyl)tetramethyldisiloxane,aromatic diamines,and isophthaloyl chloride

Random and block disiloxane-containing copolyamides were prepared through one- and two-step procedures, respectively, by the low temperature solution polycondensation in chloroform containing triethylamine hydrochloride starting from 1,3-bis(3-aminopropyl)tetramethyldisiloxane, an aromatic diamine [3,4'-diaminodiphenyl ether (ODA) or m-phenylenediamine], and isophthaloyl chloride. The random copolyamides exhibited composition-dependent single glass transition temperature (T_g), and gave transparent and tough films by solution casting or hot pressing. The ODA-based block copolyamides had two T_g's, and the solvent-cast transparent films exhibited microphase separated morphology. The block copolymers gave better quality films than the single-phase random copolymers. © 1992 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic polyureas from N,N′-bis(trimethylsilyl)-substituted aromatic diamines and aromatic diisocyanates

Silylated aromatic polyureas were synthesized by the polyaddition of N,N′-bis(trimethylsilyl)-substituted aromatic diamines to aromatic diisocyanates in various organic solvents at a temperature ranging from 30 to 100°C. Colorless and transparent films of the silylated polyureas were obtained by casting directly from these solutions in a dry nitrogen atmosphere. The silylated polyureas thermally decomposed at around 200°C and were easily desilylated with alcohol to convert to almost amorphous aromatic polyureas having inherent viscosities of 0.4–1.0 dL/g. The polyureas exhibited better solubility in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and dimethyl sulfoxide and had somewhat lower thermal decomposition temperatures (around 300°C) than the polyureas prepared by a conventional method from the parent aromatic diamines and diisocyanates.     

Synthesis and properties of aromatic polyamides derived from 1,2-bis(4-aminophenoxy)benzene and aromatic dicarboxylic acids

1,2-Bis(4-aminophenoxy)benzene was synthesized in two steps by the preparation of 1,2-bis(4-itrophenoxy)benzene from 1,2-dihydroxybenzene (catechol) and p-chloronitrobenzene and subsequent reduction with a 10% Pd-C catalyst and hydrazine hydrate. Aromatic polyamides with an inherent viscosity in the range of 1.08–2.00 dL/g were prepared by the direct polycondensation of this diamine with various aromatic dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Most of the polymers formed were soluble in aprotic solvents such as NMP and N,N-methylacetamide (DMAc), and afforded transparent, flexible, and tough films upon casting from DMAc solutions. Most of the cast films showed obvious yield points in their stress-strain curves and had tensile strength among 64–89 MPa, elongation at break among 5–23%, and initial modulus in 1.7–2.5 GPa. The glass transition temperatures (T_g) of these polymers were in the range of 207–278°C, and the 10% weight loss temperatures were recorded above 475°C in nitrogen and above 452°C in air. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of new soluble aromatic polyamides from diaminotetraphenylimidazolin-2-one and various aromatic dicarboxylic acid chlorides

Novel aromatic polyamides, having inherent viscosities of 0.76-2.31 dL/g, were synthesized by the low temperature solution polycondensation of a new highly phenylated diamine monomer having an imidazolinone group, 1,3-bis(4-aminophenyl)-4,5-diphenylimidazoline-2-one (TPIDA), with various aromatic diacid chlorides. All the polymers were amorphous, and most of the polyamides were readily soluble in organic solvents such as N-methyl–2-pyrrolidone, N,N-dimethylacetamide (DMAc), and m-cresol. Flexible and tough films could be prepared from the DMAc solutions of these soluble aromatic polyamides. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyamides were in the range of 275–315°C and 430–505°C, respectively. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of 1,3,4,-thiadiazole-containing polyethers from 2,5-bis (4-fluorophenyl)-1,3,4-thiadiazole and various aromatic diols

Seven 1,3,4-thiadiazole-containing polyethers with reduced viscosities of 0.27–1.44 dL/g were synthesized by the high-temperature solution polycondensation of novel activated difluoride, 2,5-bis (4-fluorophenyl)-1,3,4-thiadiazole, with aromatic diols possessing a variety of ring structures. The expected chemical structures were confirmed by IR and ¹H-NMR spectroscopy and elemental analysis. Of all the polymers, three polyethers were highly crystalline and soluble only in limited solvents such as concentrated sulfuric acid. The other polyethers were amorphous and dissolved easily in a variety of organic solvents including N-methyl-2-pyrrolidone (NMP), phenols, and chlorinated hydrocarbons. Colorless to slightly yellow-colored, transparent, and tough films could be cast from the NMP solutions of the amorphous polyethers. The mechanical properties of the films were excellent, and their tensile strength, elongation at break, and tensile moduli were in the ranges of 48–72 MPa, 5–7%, and 1.3–1.9 GPa, respectively. The amorphous polyethers had high glass transition temperatures of 204–299°C. All the polyethers were highly thermally and thermooxidatively stable and exhibited no weight loss up to 400°C, with 10% weight loss being recorded at 464–513°C in air. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of polyarylates derived from 4,4′-dihydroxy-meta-terphenyl and aromatic diacid chlorides

Polyarylates derived from 4,4″-dihydroxy-meta-terphenyl (DHmTP) were prepared by the phase-transfer catalyzed, two-phase polycondensation with aromatic diacid chlorides. The resulting polymers were crystalline, solvent resistant, and produced brittle films. Copolymers with bisphenol-A were also synthesized using isophthaloyl diacid chloride. At low to moderate levels of DHmTP in the copolymers (25–75%), the materials had high glass transition temperatures (186–201°C), good solvent resistance, and gave tough, clear films. Terpolymers of DHmTP and BPA with 50:50 isophthaloyl and terphthaloyl diacid chloride were prepared with not much improvement over Ardel D-100®. All the DHmTP-polyarylates had good thermal stability (5% weight loss in air > 415–460°C) and had a high % char (20–48%). © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of polyesters derived from polychlorinated aromatic diacids

New, thermally stable polyesters with varying chlorine content were prepared by solution and interfacial polycondensation between chlorinated aromatic dichlorides (perchloroterephthaloyl dichloride, 2,5-dichloroterephthaloyl dichloride, and perchloro-4,4′-dichloroformyl biphenyl with different aliphatic and aromatic diols). The polymers were characterized by infrared spectroscopy, elemental analysis, differential scanning calorimetry, and thermogravimetric analysis. Their solubilities and molecular weights were also determined. The influence of chlorine content on the thermal properties of the polymers is discussed.