Double‐crosslinked reversible redox‐responsive hydrogels based on disulfide–thiol interchange

We present novel redox‐responsive hydrogels based on poly(N‐isopropylacrylamide) or poly(acrylamide), consisting of a reversible disulfide crosslinking agent N,N′‐bis(acryloyl)cystamine and a permanent crosslinking agent N,N′‐methylenebisacrylamide for microfluidic applications. The mechanism of swelling/deswelling behavior starts with the cleavage and reformation of disulfide bonds, leading to a change of crosslinking density and crosslinking points. Raman and ultraviolet‐visible spectroscopy confirm that conversion efficiency of thiol–disulfide interchange up to 99%. Rheological analysis reveals that the E modulus of hydrogel is dependent on the crosslinking density and can be repeatedly manipulated between high‐ and low‐stiffness states over at least 5 cycles without significant decrease. Kinetic studies showed that the mechanical strength of the gels changes as the redox reaction proceeds. This process is much faster than the autonomous diffusion in the hydrogel. Moreover, cooperative diffusion coefficient (D_coop) indicates that the swelling process of the hydrogel is affected by the reduction reaction. Finally, this reversibly switchable redox behavior of bulky hydrogel could be proven in microstructured hydrogel dots through short‐term photopatterning process. These hydrogel dots on glass substrates also showed the desired short response time on cyclic swelling and shrinking processes known from downsized hydrogel shapes. Such stimuli‐responsive hydrogels with redox‐sensitive crosslinkers open a new pathway in exchanging analytes for sensing and separating in microfluidics applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2590–2601     

Crosslinking Parameter on the Preparation of Cellulose Based Hydrogel with Divynilsulfone

Polymeric hydrogels are crosslinked polymers which display high sorption capacity in water and water solution. In this work, cellulose based hydrogel was prepared with divinylsulfone as crosslinking agent. Cellulose based hydrogel was synthesized as a mixture of sodium salt of carboxymethylcellulose (CMCNa) and hydroxyethylcellulose (HEC). The effect of chemical composition, temperature and reaction time during crosslinking processes was investigated both the value of equilibrium water uptake and swelling ratio. Infrared spectra of the synthesized polymeric networks were studied to investigate the chemical structure of crosslinking reaction qualitatively. The thermal properties and morphology of the obtained cellulose based hydrogels were observed by means of TGA (thermo-gravimetry analysis) and SEM (scanning electron microscopy), respectively. Crosslinking of CMCNa/HEC polymeric network results in a decrease in thermal stability. Hydrogel with weight ratio of CMCNa/HEC 5 to 1 at reaction temperature of 60 °C gave the highest absorption capacity in distilled water.     

Structural rearrangement and stiffening of hydrophobically modified supramolecular hydrogels during thermal annealing

Dynamic crosslinks formed by thermoreversible associations provide an energy dissipation mechanism to toughen hydrogels. However, the details of the organization of these crosslinks impact the hydrogel properties through constraints on the network chain conformation. The physical crosslinks generated by hydrophobic association of the 2‐(N‐ethylperfluorooctane‐sulfonamido)ethyl methacrylate (FOSM) groups in a random copolymer of N,N‐dimethylacrylamide (DMA) and FOSM provide a simple system to investigate how the hydrogel structure (as determined from small angle neutron scattering impacts the mechanical properties of the hydrogel. The initial hydration of the copolymer at 25 °C leads to a kinetically trapped structure with large‐scale heterogeneities. Heating the hydrogel at 60 °C, which is above the glass transition temperature for the FOSM domains, allows the hydrogel structure to rearrange to reduce the density of network defects and the structural heterogeneities. That effectively increases the crosslink density of the network, which stiffens the hydrogel and decreases the swelling at equilibrium at 25 °C. The processing history determines how the hydrophobes aggregate to form the physically crosslinked network, whose structure defines the mechanical properties of these hydrogels. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1036–1044     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Swelling Behavior and Metal-Ion Uptake Capacity of pH-Responsive Hydrogels of Poly(N-acryloyl-N′-ethylpiperazine)

New hydrogels based on N-acryloyl-N′-ethylpiperazine (AcrNEP) and N,N-methylene bisacrylamide (MBA) were prepared by thermal initiated solution polymerization. The hydrogels swelled extensively in buffer solutions of low pH due to protonation of the amine functions of the monomers, while the swelling was less significant in buffer solutions of high pH. The increased swelling of the gel in low pH is due to the development and interaction of fixed charges within the gel network. As a result of the electrostatic repulsion between the charges the elastic constraint of the gel is modified which leads to pronounced swelling and hence to high water uptake. Water transport in the hydrogel both in buffer solutions of pH 2.6 and pH 8.4 was non-Fickian due to polymer relaxation (anomalous process). The gels demonstrated good uptake of divalent metal ions such as Ni²⁺, Co²⁺, and Zn²⁺, with high selectivity for Ni²⁺ ions due to the formation of a more stable ligand-metal complex. The metal uptake capacity increased with increase in pH of the solution, while an increase in the crosslinker amount of the hydrogel reduced its metal uptake capacity. In the presence of metal ions the swelling of the hydrogel reduced considerably due to the formation of additional physical crosslinks within the hydrogel network. The metal ion loaded hydrogels could be stripped and regenerated with 1 M sulfuric acid without any loss in swelling or metal uptake capacities.     

Effects of synthesis-solvent on swelling and elastic properties of poly(N-isopropylacrylamide) hydrogels

Thermosensitive N-isopropylacrylamide (NIPA) hydrogels were synthesized by a free radical copolymerization with N,N′-methylenebisacrylamide (MBAA) in four solvents: water, ethanol, acetone and N,N-dimethylformamide. The swelling and elastic properties of the hydrogels were affected by the synthesis-solvents; the hydrogels (e.g. NIPA/MBAA = 1000/50 mol/m³-pre-gel solution) synthesized in water have smaller swelling volume and larger shear modulus at 10 °C than those synthesized in amphiphilic solvents. The network structure of hydrogels was estimated in terms of the conversion and two sorts of effective crosslinking density based on the Flory theory and the concentration of crosslinker. The hydrogels synthesized in water can have the microscopic inhomogeneous network arising from the entanglement of polymer chains, while the hydrogels synthesized in amphiphilic solvents can have the homogeneous network arising from the polymer concentration lower than the pre-gel solution and can be similar in network structure to the lightly crosslinked hydrogel synthesized in water.     

Structural characterization of temperature-sensitive hydrogels by field emission scanning electron microscopy (FESEM)

The submicrometer structure of the temperature-sensitive hydrogels was observed by field emission scanning electron microscopy (FESEM), using synthesized hydrogels of different outer size and shape. The hydrogel structure strongly depends on the homogeneity of the polymer chains during the crosslinking process. A porous structure of the poly(vinyl-methyl-ether) (PVME) bulkgel, synthesized by electron beam irradiation of a concentrated polymer solution, was observed in the swollen state because the phase transitions temperature is acquired through the crosslinking process. Photo-crosslinking reaction of the poly(N-isopropylacrylamide) (PNIPAAm) copolymer in the dry state to form PNIPAAm thin films leads to a rather homogeneous structure. In the shrunk state both gels possess structure being more compact than in the swollen state. We also synthesized PVME and PNIPAAm gels with small outer dimensions in the range of some 100 nm. Heating of the thermo-sensitive polymer in diluted solutions collapses the polymer chains or aggregates. The crosslinking reaction (initiated by electron beam or UV irradiation) of these phase separated structures produces thermo-sensitive microgels. These microgel particles of PVME and PNIPAAm are spherical shape having diameters in the range of 30 - 500 nm.     

An enhanced immobilization of BSA biomolecule on anionic hydrogels: swelling and adsorption modeling

The three-dimensional structure of hydrogels plays a leading role in several areas of applications. The hydrogels are more and more used as systems of immobilized and controlled release of biomolecules in biotechnology and bio-pharmacy industries. To improve protein adsorption capacity in poly(acrylamide) hydrogels, maleic acid co-monomer was included into the reaction mixture during hydrogel synthesis. So, hydrogels of poly(acrylamide) and its copolymers with diprotic maleic acid were prepared by copolymerization and chemical crosslinking with N,N′-methylene bis-acrylamide. Swelling behavior in distilled water, in physiological saline and in bovine serum albumin (BSA) solutions was studied. Influence of initial BSA concentration on hydrogel swelling and BSA adsorption was investigated. The high amount of maleic acid present in the hydrogels has a significant effect on the swelling behavior and BSA adsorption. Results showed that the pH sensitivity of hydrogels resulted in the high amount of adsorbed BSA. The adsorption isotherms were described by Langmuir and Freundlich models. The thermodynamic parameter (ΔG _ads ⁰ ) was determined for all obtained hydrogels. We demonstrated the favorable character and reversibility of the BSA adsorption process.     

Glucose-sensitive hydrogel systems

The effect of concanavalin A on the structure of polymer hydrogels prepared via the free-radical copolymerization of acrylamide, N-(2-D-glucos)acrylamide, and N,N′-methylene-bis(acrylamide) is studied. When complexed with N-(2-D-glucos)acrylamide, concanavalin A is involved in copolymerization as a macromolecular crosslinking agent. This circumstance ensures a decrease of the degree of swelling of hydrogels in aqueous solutions with an increase in the concentration of concanavalin A in the initial monomer mixture. After the addition of glucose to an aqueous solution, the complex of concanavalin A with units of N-(2-D-glucos)acrylamide in the crosslinked copolymer dissociates and the degree of swelling of hydrogels increases considerably. Dissociation of the complex occurs at a strictly specified concentration of glucose in the solution that depend on the content of N-(2-D-glucos)acrylamide units in the copolymer. This phenomenon can be used for the controlled release of insulin previously introduced into the hydrogel through a change in the concentration of glucose in the solution.     

“Click” chemistry for in situ formation of thermoresponsive P(NIPAAm‐co‐HEMA)‐based hydrogels

The strategy for in situ chemical gelation of poly(N‐isopropylacrylamide‐co‐hydroxylethyl methacrylate) [P(NIPAAm‐co‐HEMA)]‐based polymers was demonstrated. Two types of new P(NIPAAm‐co‐HEMA) derivatives with alkyne and azide pendant groups, respectively, were prepared. When the solutions of the two derivatives were mixed together, a crosslinking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, in the presence of Cu(I) catalyst occurs. The morphology, equilibrium swelling ratio, swelling kinetics, and temperature response kinetics of the in situ gelated hydrogels were studied. In comparison with the conventional PNIPAAm hydrogel, because of the spatial hindrance of polymeric chains, the resulted hydrogels had a macroporous structure as well as a fast shrinking rate. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermoresponsive hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5263–5277, 2008     

Chondroitin/polypyrrole nanocomposite hydrogels for the accurate release of 5-fluorouracil by electrical stimulation

The development of electro-stimulated drug release devices is an innovative approach to attain the drug delivery in accurate doses at target sites in a programmed manner. In this work, novel electroactive nanocomposite hydrogels were prepared by encapsulating green-synthesized polypyrrole (PPy) colloids within chondroitin sulfate (CS) networks during the self-crosslinking of CS via N-ethyl-N′-(3-dimethylaminopropyl) carbodiimide chemistry. The structural and morphological properties of CS/PPy hydrogels were studied by Fourier-transformed infrared spectroscopy, scanning electron microscopy, and swelling kinetic measurements. The chemotherapeutic agent 5-fluorouracil (5-FU) was loaded into CS/PPy samples by hydrogel swelling method, or alternatively, by pre-incubating the drug in polymer mixture before crosslinking. Different electrical stimulations can be used to switch ON and accurately tune the 5-FU delivery from GG/PPy hydrogels. A single pulse potential of 5 V switched on the drug delivery up to 90% from nanocomposite hydrogel, in contrast to the low 5-FU amount released in a passive form (< 20%). PPy electroactive behavior played a determining role as the main driving force in 5-FU release activation. Cytotoxicity of hydrogels with and without 5-FU was examined in normal and cancer cells. Considering the high cytotoxicity of 5-FU, the ON/OFF 5-FU release patterns evidenced the potential of CS/PPy hydrogels for electrically controlled drug delivery in implantable or transdermal drug release devices.     

Thermal behavior and network structure of poly(N‐vinyl‐2‐pyrrolidone‐crotonic acid) hydrogels prepared by radiation‐induced polymerization

Poly(N‐vinyl‐2‐pyrrolidone‐crotonic acid) [P(VP/CrA)] hydrogels were prepared by irradiating the ternary mixture of VP/CrA and crosslinking agent ethylene glycol dimethacrylate (EGDMA) in water by γ rays at ambient temperature. Differential scanning calorimetry and thermogravimetric analysis were performed to evaluate the thermal properties of ionized networks and to establish if they showed thermal differences that could be related to the CrA content in the gel system. The volume swelling ratio of P(VP/CrA) hydrogels were investigated as a function of the pH in the immersing solution. The volume swelling ratio of these hydrogels increased with an increase in pH and a decrease CrA content in the hydrogel. The volume swelling ratio of the hydrogels was also evaluated using an equation, based on the Flory—Huggins thermodynamic theory, the phantom network theory of James–Guth and Donnan theory of swelling of weakly charged ionic gels for determination of the molecular weight between crosslinks and the polymer–solvent interaction parameter (χ). Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of dual responsive cyclotriphosphazene‐based IPN hydrogels for controlled release of chemotherapeutic agent

Dual responsive cyclotriphosphazene (CTP)‐based hydrogels have been synthesized for a controlled release of FU, a hydrophilic drugs. These hydrogels composed of mono (methacryloyl‐2‐ethoxy)‐pentakis(N¹,N¹‐dimethylpropane‐1,3‐diamino)‐cyclotriphosphazene (HEMA (DMPDA)₅CP), acryl amide and pectin were synthesized by free radical polymerization method using methylenebisacrylamide cross linker. The CTP hydrogels were characterized to understand the structure, drug nature in the network and morphology by FTIR, DSC, XRD and SEM, respectively. In this paper, the swelling (dynamic and equilibrium) properties of cyclotriphosphazene hydrogels were investigated, showing dual (pH and thermo) responsiveness and large variation in the swelling capacity. Based on these results the structural parameters of the hydrogel networks such as the average molecular weight between cross‐links (M_c) and polymer–solvent interaction parameter (χ) were determined. The CTP hydrogels has high FU loading efficiency 65 ± 0.5. In‐vitro FU release of these hydrogels was controlled for about 24 hr also hydrogel showed a distinct initial burst. The CTP hydrogels are bearing both hydrophilic groups of pectin and hydrophobic groups of CTP exhibited dual responsive behaviors with pH and temperature. Copyright © 2015 John Wiley & Sons, Ltd.     

不同交联剂对甲基丙烯酸-β-羟乙酯/E-51双甲基丙烯酸酯聚合物水凝胶性能的影响

以水溶性单体甲基丙烯酸-β-羟乙酯(HEMA)与大分子交联剂E-51双甲基丙烯酸酯(E-51-DMA)(质量比HEMA/E-51-DMA=90/10)为主要原料,分别引入了5种小分子交联剂:N,N′-亚甲基双丙烯酰胺(MBA)、二乙烯基苯(DVB)、双甲基丙烯酸乙二醇酯(EDMA)、1,1,1-三(丙烯酰氧甲基)丙烷(TAP)和2,2,2-三(丙烯酰氧甲基)乙醇(TAE),采用本体聚合方法合成了5个系列的聚合物水凝胶.研究了小分子交联剂的类型及用量对水凝胶溶胀性能、杨氏模量以及有效交联密度ve和聚合物-水相互作用参数χ的影响,并比较了不同交联剂的交联效率.结果表明,随着小分子交联剂用量的增大,水凝胶平衡含水量EWC逐渐降低,聚合物体积分数2逐渐增大,反映聚合物网络结构的有效交联密度ve以及热力学参数聚合物-水相互作用参数χ值也随之增大.通过理论交联密度和有效交联密度的线性拟合,得到所选用的5种小分子交联剂在E-51-DMA10/HEMA90水凝胶体系中的交联效率,其顺序为DVB>EDMA>TAE>MBA≈TAP.     

Synthesis and characterization of κ‐carrageenan/poly(N,N‐diethylacrylamide) semi‐interpenetrating polymer network hydrogels with rapid response to temperature

In this study, a novel classical thermo‐ and salt‐sensitive semi‐interpenetrating polymer network (semi‐IPN) hydrogel composed of poly(N,N‐diethylacrylamide) (PDEAm) and κ‐carrageenan (KC) was synthesized by free radical polymerization. The structure of the hydrogels was studied by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR and SEM revealed that the semi‐IPN hydrogels possessed the structure of H‐bonds and larger number of pores in the network. Compared to the PDEAm hydrogel, the prepared semi‐IPN hydrogels exhibited a much faster response rate to temperature changes and had larger equilibrium swelling ratios at temperatures below the lower critical solution temperature (LCST). The salt‐sensitive behavior of the semi‐IPN hydrogels was dependent on the content of KC. In addition, during the reswelling process, semi‐IPN hydrogels showed a non‐sigmoidal swelling pattern. Copyright © 2008 John Wiley & Sons, Ltd.     

Doublestimuli-responsive degradable hydrogels for drug delivery: Interpenetrating polymer networks composed of oligopeptide-terminated poly(ethylene glycol) and dextran

Biodegradable hydrogels composed of oligopeptide-terminated poly(ethylene glycol) (PEG) and dextran with interpenetrating polymer network (IPN) structure were proposed as a novel substrate for multistimuli-responsive drug delivery. IPN-structured hydrogels were synthesized by sequential crosslinking reactions of N-methacryloyl-glycilglycilglycil-terminated PEG and dextran. In vitro degradation of the IPN-structured hydrogels was examined using papain and dextranase as model enzymes for hydrolyzing the oligopeptide and the dextran. Specific degradation in the presence of papain and dextranase was observed in the IPN-structured hydrogel with a particular composition of PEG and dextran, whereas this hydrogel was not degraded by one of the two enzymes.     

Modified carrageenan. 5. Preparation,swelling behavior,salt‐ and pH‐sensitivity of partially hydrolyzed crosslinked carrageenan‐graft‐polymethacrylamide superabsorbent hydrogel

The polysaccharide, kappa‐carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′‐methylene bisacrylamide (MBA) were used as a free‐radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC‐g‐PMAM or hydrolyzed κC‐g‐PMAM (PMAM: polymethacrylamide) was characterized by FT‐IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling capacity of these hydrogels was also measured in various salt solutions. Results indicated that the swelling ratios decreased with an increase in the ionic strength of the salt solutions. This behavior can be attributed to charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. Absorbency of superabsorbing hydrogels was examined in buffer solutions with pH range 1–13. Also, the pH reversibility and on–off switching behavior, at pH values 3.0 and 8.0, makes the synthesized hydrogels good candidates for controlled delivery of bioactive agents. Finally, swelling kinetics in distilled water and various salt solutions was preliminary investigated. Results showed that the swelling in water was faster than in saline solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Facile synthesis of tough metallosupramolecular hydrogels by using phosphates as temporary ligands of ferric ions to avoid inhibition of polymerization

Forming carboxyl-Fe³⁺ coordination bonds as physical crosslinks is an effective strategy to develop tough hydrogels. Considering the inhibition of ferric ions on free-radical polymerization, these coordination bonds cannot be formed during the reaction, and a soaking process of preformed hydrogels is usually required for mechanical enhancement, resulting in uncontrollable gradient structure, long preparation time, and unnecessary waste of metallic ions. A facile strategy is reported here to prepare tough metallosupramolecular hydrogels by polymerization and in situ formation of coordination bonds with phosphates as the temporal ligands of Fe³⁺ ions. The phosphate ligands in the precursor solution form coordination complexes with the Fe³⁺ ions, which avoids the inhibition and ensures the polymerization. After swelling the resultant hydrogel in water, the ligands are substituted by carboxyl groups of the gel matrix due to the variation of local pH. The equilibrated hydrogel with carboxyl-Fe³⁺ coordination bonds as the physical crosslinks possesses excellent mechanical properties that can be tuned over a wide range by adjusting the polymer compositions and the concentrations of phosphate ligands and Fe³⁺ ions. This strategy should be applicable to other systems to enable synthesis of functional hydrogels with Fe³⁺ ions as the additive toward specific applications in engineering and biomedical fields.     

Synthesis and Swelling Behavior of Acrylate‐Based Hydrogels

The purpose of this investigation was to report the synthesis of a novel pH‐sensitive acrylate‐based hydrogel by polymerizing the comonomers 2‐hydroxyethyl methacrylate, HEMA, acrylic acid, AA, and sodium acrylate, NaAc. The NaAc component was obtained by neutralization of AA with sodium hydroxide. Hydrogels were obtained by free radical copolymerization in aqueous solution in the presence of redox initiators, Na₂S₂O₈/Na₂S₂O₅, and ethylene glycol dimethacrylate, EGDMA, crosslinker. The copolymers were synthesized by varying neutralization percent of AA in the range of 10–100. The swelling behavior of the copolymeric gels were investigated as a function of pH, temperature, ionic strength, and AA neutralization percent. The polymer mesh size, ξ, molecular weight between crosslinks, M_c , and crosslinking density, q, were determined by using the Flory‐Rehner equation in the pH range of 2–8 as 8.78–48.8 Å, 209–2667 g/mol, and 0.046–0.59, respectively. The diffusional exponent value, n, of the synthesized hydrogel was found to be 0.59, indicating a non‐Fickian diffusion mechanism. It can be concluded that the hydrogel demonstrated a sharp change in its water absorbency, mesh size and molecular weight between crosslinks of the network with a change in pH of the swelling media. The latter properties suggest strong consideration of these hydrogels for use as oral drug delivery systems and ion‐exchangers for removal of metal ions from aqueous media, owing to the carboxylate groups within the polymeric network.