Fluorescence study on the domain formation of <Emphasis Type="Italic">N</Emphasis>-dodecanoyl-<Emphasis Type="SmallCaps">l</Emphasis>-tryptophan within a liposome membrane

The aggregation behavior of N-dodecanoyl-l-tryptophan within a liposome membrane was investigated by fluorescence spectroscopy. Liposomes with a mean diameter of 100 nm, formed from either 1-2-dilauroyl-sn-glycero-3-phosphocholine, 1-2-myristoyl-sn-glycero-3-phosphocholine, or 1-2-palmitoyl-sn-glycero-3-phosphocholine, were used. Fluorescence measurements indicate that the sodium salt of N-dodecanoyl-l-tryptophan forms domains with the liposome membranes below the main phase transition temperature, T _m. Above T _m, the molecules are homogeneously dispersed in the liquid crystalline state of the membranes.     

Analysis of Amphiphilic Lipids and Hydrophobic Proteins Using Nonresonant Femtosecond Laser Vaporization with Electrospray Post-Ionization

Amphiphilic lipids and hydrophobic proteins are vaporized at atmospheric pressure using nonresonant 70 femtosecond (fs) laser pulses followed by electrospray post-ionization prior to being transferred into a time-of-flight mass spectrometer for mass analysis. Measurements of molecules on metal and transparent dielectric surfaces indicate that vaporization occurs through a nonthermal mechanism. The molecules analyzed include the lipids 1-monooleoyl-rac-glycerol, 1,2-dihexanoyl-sn-glycero-3-phosphocholine, 1,2-dimyristoyl-sn-glycero-3-phosphocholine, and the hydrophobic proteins gramicidin A, B, and C. Vaporization of lipids from blood and milk are also presented to demonstrate that lipids in complex systems can be transferred intact into the gas phase for mass analysis.     

Discriminating binding and positioning of amphiphiles to lipid bilayers by H NMR

The binding and positioning in lipid bilayers of three well-known drugs—imipramine, nicotine, and caffeine—have been studied using ¹H NMR. The membrane model system consisted of “fast-tumbling” lipid bicelles, in which a bilayered lipid domain, composed of the unsaturated lipid, 1,2-dimyristelaidoyl-sn-glycero-3-phosphocholine (DMLPC) was surrounded by a rim of deuterated detergent-like lipids, consisting of 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC-d22). Binding and immersion depth information was obtained by three experiments. (1) ¹H chemical shift perturbations, upon transfer of the amphiphiles from water to a bicelle mixture, were used to estimate regions of the amphiphiles that interact with the membrane. (2) Water contact to resolvable protons was measured through a Nuclear Overhauser Effect (NOE) between water and resolvable drug and lipid resonances. In the case of both lipids and membrane bound drugs, positive NOEs with large cross-relaxation rates were measured for most resonances originating from the membrane hydrophilic region, while negative NOEs were observed predominantly to resonances in the hydrophobic region of the membrane. (3) ¹H NMR measurements of oxygen-induced (paramagnetic) spin-lattice relaxation rates, which are known to increase with membrane immersion depth, were used to corroborate conclusions based on chemical shift perturbations and water-ligand NOEs.     

Spectroscopic studies of polymerized surfactants: 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine

Spectroscopic studies have been performed on aqueous dispersions of the surfactant 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine before and after polymerization with ul-traviolet light. Monomers of this lipid can, under certain conditions, convert from the expected spherical liposomal form to a unique phase consisting of hollow tubules. To determine the molecular conformation of these structures we have used Raman and infrared spectroscopies to probe the structure of the hydrocarbon chains and head groups of the lipids, and used absorption spectroscopy and resonance enhanced Raman scattering of the colored polymer to monitor the length and structure of the diacetylenic polymer backbone. Unusual C? H stretch-ing Raman bands imply that the hydrocarbon chain packing in the monomeric bilayers is different from that observed in other phosphatidylcholines, and that a distrubance in alkyl chain packing occurs on polymerization. Depending on irradiation conditions and the dispersal state of the lipid the polymer chains may be of at least three different colors, from which distinct resonance Raman spectra are obtained. The effective bond conjugation lengths range from quite short in the yellow polymer produced in sonicated vesicles to extremely long in a blue component seen in polymerized tubules.     

Polymerization of liposomes composed of diene-containing lipids by radical initiators. II. Polymerization of monodiene-type lipids as liposomes

1-Palmitoyl-2(2,4-octadecadienoyl)-sn-glycero-3-phosphocholine (POPC), a polymerizable lipid that contains one diene group in only a 2-acyl chain, was polymerized as liposome in an aqueous medium. Polymerization was initiated by water-insoluble azobisisobutyronitrile (AIBN), or water-soluble azobis(2-amidinopropane) dihydrochloride (AAPD). AIBN was mixed with monomeric lipids, and the mixture was dispersed in an aqueous medium by sonication to prepare AIBN-containing monomeric lipid liposomes. On the other hand, AAPD was simply added to the liposome suspension. The POPC liposomes were easily polymerized by the addition of AAPD, a water-soluble radical initiator, but few were polymerized by AIBN. The results suggested that the diene group in the 2-acyl chain was in an aqueous phase and, therefore, easily polymerized by a water-soluble radical initiator. The polymerized POPC liposomes were revealed to be more stable than those of monomeric ones because the scattered-light intensity from the polymerized POPC liposome suspension changed a little by the addition of Triton X-100. For only the polymerized ones, the liposome structure was confirmed by TEM after addition of an excess amount of Triton X-100.     

Voltammetric study of gold-supported lipid membranes in the presence of perfluorooctanesulphonic acid

The effect of perfluorooctanesulphonic acid (PFOS) on lipid membranes was studied using supported 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayer as the model membrane. Phospholipid bilayer was deposited on gold electrode using a combination of the Langmuir–Blodgett and Langmuir–Schaefer (LB/LS) techniques. Electrodes were modified with two different types of membranes: DMPC bilayers initially containing PFOS and pure DMPC bilayers later exposed to the PFOS solutions. Such approach allowed studying both the changes in membrane characteristic imposed by the perfluorinated compound present in the model membrane and the process of its incorporation into the membrane. Studies with anticancer drug doxorubicin revealed that PFOS inhibits drug transport through the phospholipid bilayer and its effect can be compared to that of cholesterol. Moreover, the different trends observed in the changes in electron transfer rate constant (k_s) calculated for ferricyanides and in peak current of hexaamineruthenium chloride showed that electrostatic interactions between electroactive probes and PFOS molecules incorporating into phospholipid bilayers play an important role and should be taken into account while explaining the interactions of perfluorooctanesulphonic acid with model biological membranes.     

Design of liposomes containing photopolymerizable phospholipids for triggered release of contents

We describe a novel class of light-triggerable liposomes prepared from a photo-polymerizable phospholipid DC_8,9PC (1,2-bis (tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine) and DPPC (1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine). Exposure to UV (254 nm) radiation for 0–45 min at 25 °C resulted in photo-polymerization of DC_8,9PC in these liposomes and the release of an encapsulated fluorescent dye (calcein). Kinetics and extents of calcein release correlated with mol% of DC_8,9PC in the liposomes. Photopolymerization and calcein release occurred only from DPPC/DC_8,9PC but not from Egg PC/DC_8,9PC liposomes. Our data indicate that phase separation and packing of polymerizable lipids in the liposome bilayer are major determinants of photo-activation and triggered contents release.     

Zeta potential and surface free energy changes of solid-supported phospholipid (DPPC) layers caused by the enzyme phospholipase A2 (PLA2)

Stability and wetting properties changes of systems formed of phospholipid DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) layers covering silica particles or glass slides due to the phospholipase A₂ (PLA₂) action were determined by zeta potential measurements and the surface free energy evaluation, respectively. The comparison of the zeta potential and surface free energy, which was evaluated from advancing and receding contact angles via applying models of interfacial interactions, i.e. van Oss et al. (LWAB) and contact angle hysteresis (CAH), was found to be helpful for better understanding the mechanism of PLA₂ action on the lipid layers, what is discussed in the paper.     

13C NMR spectra of 1-stearoyl-2-linoleyl-sn-glycero-3-phosphorylcholine and 1-stearoyl-2-arachidonoyl-sn-glycero-3-phosphorylcholine in CDCl3 solution and in sonicated dispersions in 2H2O

Two mixed-acid lecithins: 1-stearoyl-2-linoleyl-sn-glycero-3-phosphorylcholine (SLL) and 1-stearoyl-2-arachidonoyl-sn-glycero-3-phosphorylcholine (SAL) have been synthesized by phospholipase A₂ digestion of 1,2-distearoyl-sn-glycero-3-phosphorylcholine (DSL), followed by reacylation of the lysolecithin with the desired fatty acid anhydride. ¹³C (25.2 MHz) NMR spectra of SLL and SAL in CDCl₃ solution and in sonicated dispersions in ²H₂O have been obtained. Complete spectral assignments are reported for the two molecules in both systems. ¹³C nuclear spin-lattice relaxation times (T₁) of SLL and SAL in sonicated aqueous dispersions have also been measured. Relaxation rate profiles as a function of the chain segment position are in general agreement with those recently obtained from ²H NMR for similar systems.     

Patterned monomolecular films from polymerizable and fluorinated lipids for the presentation of glycosylated lipids

This paper deals with pattern formation in Langmuir monolayers of two sets of lipid mixtures that include (1) a fluorinated lipid for phase separation, (2) a polymerizable lipid for stabilization of the patterned structure, and (3) a unit for the presentation of biological recognition units. Differences in the distribution of these functionalities allow a polymerization of dispersed or continuous phase and a placement of the recognition units in crystalline or solid analogue phase. Also, a ternary mixture including a lipid modified with the tandem repeat domain of MUC1 plus a T_N-antigen was studied. Based on the biphasic pattern obtained (starlike crystals of up to 50 μm with a fine structure of some micrometers), we also verified the potential of the laterally patterned monolayer to stimulate the immune system (quartz crystal microbalance). The second set of lipids combines a highly fluorinated itaconic ester (polymerizable unit) with the natural phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine.     

Effect of liposome composition on β-blocker interactions studied by capillary electrokinetic chromatography

Liposome capillary electrokinetic chromatography was used to investigate the interactions between three β-blockers of different hydrophobicity and various liposome solutions. The studied β-blockers comprised alprenolol, propranolol, and carvedilol. The composition of the liposome solutions, containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, 1,2-dioleoyl-sn-glycero-3-phos-phoethanolamine, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l -serine, and cholesterol in various molar ratios, was designed by a response surface methodology-central composite design approach. Subsequently, after conducting the liposome capillary electrokinetic chromatography experiments and determining the retention factors from the electrophoretic mobilities of the compounds, and further calculating the distribution coefficients, an analysis of variance was performed. After extracting the statistical models, optimal operational conditions were obtained based on the developed models. To further investigate the interactions between the β-blockers and the liposomes, nanoplasmonic sensing experiments were carried out on two different liposome systems. The overall results demonstrate the strong influence of cholesterol and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l -serine on the distribution coefficients.     

Liquid chromatography–mass spectrometric determination of plasmalogens in human plasma

A new liquid chromatography–mass spectrometry (LC/MS) method has been developed for the quantitative analysis of plasmalogens in human plasma using a nonendogenous plasmalogen (1-O-1′-(Z)-tricosenyl-2-oleoyl-rac-glycero-3-phosphocholine, PLS 23:0/18:1) as an internal standard. 1-O-1′-(Z)-Tricosenyl glyceryl ether was prepared by reacting lithioalkoxyallyl with 1-iodoeicosane as the key intermediate in the formation of PLS 23:0/18:1. In LC/MS analyses, PLS 23:0/18:1 generated significant fragment ions in positive and negative modes. In positive ion mode, the [M+H]⁺ of PLS 23:0/18:1 yielded unique fragments with cleavages at the sn-1 and sn-2 positions of the glycerol backbone. In negative ion mode, the [M+CH₃COO]⁻ of PLS 23:0/18:1 resulted in characteristic fragmentation at the sn-2 and sn-3 positions. 1-O-1′-(Z)-Hexadecenyl-2-linoleoyl-rac-glycero-3-phosphocholine (PLS 16:0/18:2) and 2-arachidonoyl-O-1′-(Z)-hexadecenyl-rac-glycero-3-phosphocholine (PLS 16:0/20:4) were chemically synthesized as PLS 23:0/18:1. The calibration curves obtained for PLS 16:0/18:2 and PLS 16:0/20:4 were linear throughout the calibration range (0.04–1.60 pmol). The LOD (S/N = 5:1) was 0.008 pmol and the LOQ (S/N = 6:1) was 0.01 pmol for both PLS 16:0/18:2 and PLS 16:0/20:4. Plasma concentrations of PLS 16:0/18:2 and PLS 16:0/20:4 were 4.0 ± 1.3 μM and 3.5 ± 1.2 μM (mean ± SD), respectively, in five healthy volunteers.     

Chiral recognition of dipeptides in phosphatidylcholine aggregates

Enantiodiscrimination of ditryptophan enantiomers (l-Trp-l-Trp and d-Trp-d-Trp, l-Trp-d-Trp and d-Trp-l-Trp) was observed in bio-membrane models, such as micellar aggregates of 1,2-diheptanoyl-sn-glycero-3-phospatidylcholine (DHPC) and multilamellar vesicles of either 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) or 1,2-dimyristoyl-sn-glycero-3-phospatidylcholine (DMPC) by solution ¹H NMR and HR-MAS ¹H NMR, respectively. The attainment of resolved signals, allowed the first detection of enantiodiscrimination at a molecular level, and the identification of the site of chiral recognition and of the interactions and conformations of homo- and heterochiral dipeptides in large-sized aggregates formed by a common component of bio-membranes.     

Liposome formation of selectively-polymerized diene-containing phospholipids and their postpolymerization

Small and large unilamellar liposomes composed of 1,2-bis(2,4-octadecadienoyl)-sn-glycero-3-phosphorylcholine (DODPC) are prepared by sonication and extrusion, respectively. They are polymerized with water-insoluble radical initiator, azobis(isobutyronitrile) (AIBN) which can selectively polymerize diene groups in 1-acyl chains of the lipids. Polymerized liposomes are freeze-dried to obtain the polymerized liposome powder. There are two methods to redisperse lyophilized liposomes into water. The extrusion is an effective method to disperse them because the energy at extrusion is necessary only for redispersion, whereas the excess energy at sonication gives damage on liposome structure. There is no difference in stability between polymerized liposomes before and after redispersion with extrusion. DODPC polymers, obtained from free radical-initiated polymerization with AIBN, are linear and have polymerizable diene groups in 2-acyl chains. The liposome powder is therefore soluble in organic solvents. Reconstruction of polymerized liposomes is performed with lipid polymers having low or high molecular weight. The lipid polymers having high molecular weight provide stable large unilamellar liposomes by ethanol injection, but unstable small unilamellar liposomes are formed by sonication. The liposomes reconstructed from lipid polymers having low molecular weight are unstable regardless of their size. After reconstruction of liposomes selectively polymerized by AIBN, diene groups in 2-acyl chains are polymerized by water-soluble radical initiator or UV-irradiation to yield highly crosslinked structure. Their stability is improved remarkably by this postpolymerization.     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Rapid access to phospholipid analogs using thiol-yne chemistry

Phospholipids and glycolipids constitute an essential part of biological membranes, and are of tremendous fundamental and practical interest. Unfortunately, the preparation of functional phospholipids, or synthetic analogs, is often synthetically challenging. Here we utilize thiol-yne click chemistry methodology to gain access to phospho- and glycolipid analogs. Alkynyl hydrophilic head groups readily photoreact with numerous thiol modified lipid tails to yield the appropriate dithioether phospho- or glycolipids. The resulting structures closely resemble the structure and function of native diacylglycerolipids. Dithioether phosphatidylcholines (PCs) are suitable for forming giant unilamellar vesicles (GUV), which can be used as vessels for cell-free expression systems. The unnatural thioether linkages render the lipids resistant to phospholipase A2 hydrolysis. We utilize the improved stability of these lipids to control the shrinkage of GUVs composed of a mixture of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and dioleyl-dithioether PC, concentrating encapsulated nanoparticles. We imagine that these readily accessible lipids could find a number of applications as natural lipid substitutes.     

Oxygen-Binding Profile of the Iron Porphyrin Complex Embedded in Polymerized Liposome: Effect of the Polymerized Liposome on the Stability and the Oxygen-Binding Ability of the Iron Porphyrin Complex

5,10,15,20-Tetra(α,α,α,α, -o-(2′, 2′-dimethyl-20′-(2′ α-trimethylammonioethyl)phosphonatoxyeicosanamido)phenyl)porphinatoiron(II) (lipidheme) complex embedded in polymerized liposome was prepared by polymerizing l-(9-(p-vinylbenzoyl)nonanoyl)-2-O-octadecyl-rac-glycero-3-phosphocholine in the presence of lipid-heme under ultraviolet irradiation. The polymerization proceeded rapidly, and the reduction of the hemin to the heme occurred spontaneously during the polymerization. The lipid-heme complex embedded in the polymerized liposome bound molecular oxygen reversibly under physiological conditions (pH 7, 37°C) and was chemically, physically, and mechanically stable during storage for a long period and even in a high-speed flow system. The oxygen-binding affinity was not affected by the type of medium due to the effect of the rigid polymerized liposome.     

Investigation of Factors Affecting Controlled Release from Photosensitive DMPC and DSPC Liposomes

An investigation of liposomes comprised of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) or 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) lipids with cholesterol and zinc phthalocyanine (ZnPC) revealed that several fundamental liposome properties are influenced by composition and by lipid-specific features. DMPC and DSPC liposomes were synthesized, and their compositional changes, encapsulation capacities, morphologies, and release properties were evaluated. In this research, liposome degradation, lysis, and content release were initiated by photolysis, i.e., rupture induced by exposure to light. A controlled release mechanism was created through the introduction of photosensitizers (i.e., ZnPC) embedded within the cholesterol-stabilized liposome membrane. The light wavelength and light exposure time accelerated photodegradation properties of DMPC liposomes compared to DSPC liposomes, which exhibited a slower release rate. Morphological changes in the liposomes were strongly influenced by light wavelength and light exposure time. For both the DMPC and DSPC liposomes, visible light with wavelengths in the red end of the spectrum and broad spectrum ambient lighting (400?C700?nm) were more effective for lysis than UV-A light (365?nm). Heating liposomes to 100?°C decreased the stability of liposomes compared to liposomes kept at room temperatures. In addition, the optimal lipid-to-cholesterol-to-photoactivator ratio that produced the most stable liposomes was determined.     

Durability of oxygen evolution of photosystem II incorporated into lipid bilayers

Photosystem II (PSII) has attracted a lot of attention for use in the construction of artificial photosynthetic materials due to its high activity of oxidation of water molecules. However, the robustness of PSII needs to be improved for in vitro application. In this study, we incorporated PSII (Thermosynechococcus vulcanus) into various phospholipid membranes to examine the activity and durability of oxygen evolution. PSII was incorporated into anionic 1,2-dioleoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (PSII-DOPG), zwitterionic 1,2-dioleoyl-sn-glycero-3-phosphocholine (PSII-DOPC), and cationic 1,2-dioleoyl-sn-glycero-3-ethylphosphocholine (PSII-EDOPC). Structural integrity of PSII was examined by absorption and fluorescence spectroscopy. Compared with PSII dissolved in a micellar solution of n-dodecyl-β-d-maltoside (PSII-micelle), durability of PSII-DOPC and PSII-DOPG were enhanced by 1.3- and 1.5-fold, respectively. The activity and durability of PSII-EDOPC was significantly low. Lipid-dependent activity and durability were discussed in terms of kinetic parameters of V _max and K _m, and inhibition of the electron acceptor, phenyl-p-benzoquinone.     

Membrane Permeability and Stability of Liposomes Suspended in Shear Flow

The 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) liposome has been characterized in its stability and membrane permeability to 5(6)-carboxyfluorescein (CF) in the shear flow generated in the cone-and-plate geometry. The CF-containing liposomes (CFLs) were 101–323 nm in the mean diameter D _P as measured with the dynamic light scattering (DLS) method. Adsorption of lipids to the cone-and-plate was observed, which clearly depended on the shear stress applied at the shear rate γ up to 1.5 × 10³ s^?1. The permeability of CFLs with D _P of 101 and 117 nm definitely increased at the maximum γ value where the adsorption was negligible. The permeability coefficient of CF at 40°C in the shear flow was 5.7 times larger than that in the static liquid system. The DLS measurements revealed that the size distribution of CFLs with D _P of 101–189 nm was practically unchanged under the shear stress even at 55°C. The results obtained show that the shear stress can permeabilize the CFL membranes with neither structural collapse nor coalescence.