Solvolysis of bisphenol A diglycidyl ether/anhydride model networks

The chemical recycling by solvolysis of epoxy resins, in particular those of the type including bisphenol A diglycidyl ether (DGEBA) cured by anhydrides, appears rather easy. The association of titanium(IV) n-butoxide (TBT) and diethyleneglycol (DEG) catalyst/solvent system proved effective. The depolymerisation of a model matrix, as well as composite waste, is pushed practically to the monomer stage. The glycolysis products are constituted by esterdiols, tetraalcohols and excess of glycol. The excess solvent can be eliminated by distillation under vacuum, without re-equilibration reactions towards the formation of higher molar mass species. Solvolysis by monoethanolamine (MEA) has also been studied. The reaction is more effective but the depolymerisation products are solid. Characterization of the depolymerisation products by NMR and Maldi-Tof has confirmed the reaction mechanism of transesterification and the presence of other alcoholysis side reactions.     

Analysis of curing of diglycidyl ether of bisphenol A (BADGE n = 0) with 2‐adamantylethanamine

The epoxy resin diglycidyl ether of Bisphenol A (BADGE n = 0) has been cured with a new synthesized hardener (2‐adamantylethanamine) and the crosslinking reaction was characterized by DSC. Values of 413.3 J/g and 95°C have been obtained for the enthalpy of the reaction and the glass transition temperature, respectively. The experimental results obey Kamal's model over all conversion range of temperatures (70°C‐100°C). The activation energies of the mechanisms involved in the curing reaction have been determined for both the autocatalytic and the n‐order mechanism, the values being 63.3 and 29.8 kJ/mol, respectively. The value for T_g is 23°C higher than the one for (BADGE n = 0)/amantadine, while the activation energy for the n‐order mechanism is around 13 kJ/mol lower. This is consistent with a higher steric effect of the adamantyl group in the second hardener since it will hinder the opening the oxirane ring by the nitrogen atom of the amino group. As the polymerization reaction progress, this effect will disappear as the distance adamantyl‐oxirane increase when new oxirane groups react with the hydroxyl groups (autocatalyzed reaction). Consequently, by selecting the appropriate cross‐linking agent, it is possible to simultaneously increase T_g while reducing theactivation energy, two effects which may be desirable for some industrial applications of the material.     

Copolymer networks from carboxyl‐containing polyaryletherketone and diglycidyl ether of bisphenol‐A: Preparation and properties

This article presents a new type of epoxy‐toughening system, in which high‐T_g polyaryletherketone (PEK‐L) containing one carboxyl group per repeating unit was utilized to randomly copolymerize with epoxy resin (DGEBA) to form crosslinking network. Compared to the neat epoxy resin, the PEK‐L/DGEBA copolymers showed simultaneous enhancement in flexural strains at break by 282%, G_IC value by 193%, and flexural strength by 14%. The reason was attributed to the uniform three‐dimensional copolymer network interweaved by PEK‐L and DGEBA segments through strong covalent bonds. The copolymerization process were monitored and examined by FTIR spectra. The effect of copolymer composition on the thermal and mechanical properties as well as toughening mechanism were also investigated and discussed in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Structure and property relationships in model diglycidyl ether of bisphenol‐a and diglycidyl ether of tetramethyl bisphenol‐a epoxy systems. I. Mechanical property characterizations

Model epoxy networks, with variations in crosslink density and in epoxy monomer rigidity, were prepared to study how the network structure affects modulus, T_g, and toughness/toughenability of epoxy resins. Diglycidyl ether of bisphenol‐A and diglycidyl ether of tetramethyl‐bisphenol‐A, along with the corresponding chain extenders, were chosen to study how monomer backbone rigidity and crosslink density affect physical and mechanical properties of epoxies. The present study indicates that, as expected, the backbone rigidity of the epoxy network, not the crosslink density alone, will strongly influence modulus and T_g of epoxy resins. Upon rubber toughening, it is found that the rigidity of the epoxy backbone and/or the nature of the crosslinking agent utilized are most critical to the toughenability of the epoxy. That is, the well‐known correlation between toughenability and the average molecular weight between crosslinks (M_c) does not necessarily hold true when the nature of epoxy backbone molecular mobility is altered. The potential significance of the present findings for a better design of toughened thermosets for structural applications is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2137–2149, 1999     

Properties of epoxy networks derived from the reaction of diglycidyl ether of bisphenol A with polyhedral oligomeric silsesquioxanes bearing OH‐functionalized organic substituents

A polyhedral oligomeric silsesquioxane (POSS), consisting mainly of a mixture of octahedra, nonahedra, and decahedra with bulky and flexible organic substituents, with three secondary hydroxyls per organic group, was used to modify epoxy networks produced by the homopolymerization of diglycidyl ether of bisphenol A in the presence of benzyldimethylamine. Several physical, thermal, and mechanical properties of the cured materials containing 0, 10, 30, and 50 wt % POSS were determined. The addition of POSS increased the elastic modulus and the yield stress measured in uniaxial compression tests, mainly because of the increase in the cohesive energy density produced by hydrogen bonding through the hydroxyl groups. A constant yield stress/elastic modulus ratio equal to 0.03 was observed for different POSS concentrations and test temperatures. The glass‐transition temperature decreased with POSS addition because of the flexibility of organic branches present in the POSS structure and the decrease in the crosslink density (determined from the rubbery modulus). Although a combination of a reduction in the glass‐transition temperature (plasticization) with an increase in the glassy modulus (antiplasticization) is a well‐known phenomenon, what is original is that in this case it was not the result of the suppression (or reduction in intensity) of subglass relaxations but was produced by an increase in the cohesive energy density. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1451–1461, 2003     

Rheology and interdiffusion in miscible blends of a low molar mass liquid crystal and bisphenol A–polycarbonate

The melt rheology of blends of a low molar mass liquid crystal (LC) blended with bisphenol A–polycarbonate (PC), and the self‐diffusion of the polycarbonate in the blends are reported. Results of small angle light scattering indicate that the LC is miscible in the mixture for weight fraction of LC less than 6%. The rheological properties of the blended sample within the miscible regime of the blends vary significantly with LC content. Although at low shear rates, the viscosity is similar to that of the pure polycarbonate, at high shear rates the curves show three regions of behavior, as has been described previously for pure LCs. The diffusion coefficient was obtained from interdiffusion studies using nuclear reaction analysis of bilayer films. An addition of only 1 wt % LC to the polycarbonate significantly increased the diffusion coefficient, but at higher concentration the converse was found. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2187–2195, 2007     

Microwave‐assisted extraction for the simultaneous determination of Novolac glycidyl ethers,bisphenol A diglycidyl ether,and its derivatives in canned food using HPLC with fluorescence detection

A microwave‐assisted extraction (MAE) protocol and an efficient HPLC analysis method were first developed for the fast extraction and simultaneous determination of bisphenol F diglycidyl ether (Novolac glycidyl ether 2‐Ring), Novolac glycidyl ether 3‐Ring, Novolac glycidyl ether 4‐Ring, Novolac glycidyl ether 5‐Ring, Novolac glycidyl ether 6‐Ring, bisphenol A diglycidyl ether, bisphenol A (2,3‐dihydroxypropyl) glycidyl ether, bisphenol A (3‐chloro‐2‐hydroxypropyl) glycidyl ether, bisphenol A bis(3‐chloro‐2‐hydroxypropyl) ether, bisphenol A (3‐chloro‐2‐hydroxypropyl) (2,3‐dihydroxypropyl) ether in canned fish and meat. After being optimized in terms of solvents, microwave power and irradiation time, MAE was selected to carry out the extraction of ten target compounds. Analytes were purified by poly(styrene‐co‐divinylbenzene) SPE columns and determinated by HPLC‐fluorescence detection. LOD varied from 0.79 to 3.77 ng/g for different target compounds based on S/N=3; LOQ were from 2.75 to 10.92 ng/g; the RSD for repeatability were <8.64%. The analytical recoveries ranged from 70.46 to 103.44%. This proposed method was successfully applied to 16 canned fish and meat, and the results acquired were in good accordance with the studies reported. Compared with the conventional liquid–liquid extraction and ultrasonic extraction, the optimized MAE approach gained the higher extraction efficiency (20–50% improved).     

Studies on the cross‐interaction between hIAPP and Aβ25–35 and the aggregation process in binary mixture by electrospray ionization‐ion mobility‐mass spectrometry

A wealth of epidemiological evidence indicates a strong link between type 2 diabetes (T2D) and Alzheimer's disease (AD). The fiber deposition with cross‐β‐sheet structure formed by self‐aggregation and misfolding of amyloidogenic peptides is a common hallmark of both diseases. For the patients with T2D, the fibrils are mainly found in the islets of Langerhans that results from the accumulation of human islet amyloid polypeptide (hIAPP). The major component of aggregates located in the brain of AD patients is amyloid‐β (Aβ). Many biophysical and physiological properties are shared by hIAPP and Aβ, and both peptides show similar cytotoxic mechanisms. Therefore, it is meaningful to investigate the possible cross‐interactions of hIAPP and Aβ in both diseases. In this article, the segment 25–35 of Aβ was selected because Aβ_25–35 was a core region in the process of amyloid formation and showed similar aggregation tendency and toxicity with full‐length Aβ. The electrospray ionization‐ion mobility‐mass spectrometry analysis and thioflavin T fluorescence kinetic analysis combined with transmission electron microscopy were used to explore the effects of the coexistence of Aβ_25–35 and hIAPP on the self‐aggregation of both peptides and whether there was co‐assembly in fibrillation. The results indicated that the aggregation of hIAPP and Aβ_25–35 had two nucleation stages in the binary mixtures. hIAPP and Aβ_25–35 had a high binding affinity and a series of hetero‐oligomers formed in the mixtures of hIAPP and Aβ_25–35 in the early stage. The cross‐reaction between hIAPP monomers and Aβ_25–35 monomers as well as a little of oligomers during primary nucleation stage could accelerate the aggregation of Aβ_25–35. However, owing to the obvious difference in aggregation ability between hIAPP and Aβ_25–35, this cross‐interaction had no significant impact on the self‐assembly of hIAPP. Our study may offer a better understanding for exploring the molecular mechanism of the association between AD and T2D observed in clinical and epidemiological studies and developing therapeutic strategies against amyloid diseases.     

New thermosets obtained by the cationic copolymerization of diglycidyl ether of bisphenol A with γ‐caprolactone with an improvement in the shrinkage. I. Study of the chemical processes and physical characteristics

Diglycidyl ether of bisphenol A was cured with different proportions of γ‐caprolactone with ytterbium triflate as an initiator. The curing was studied by means of differential scanning calorimetry and Fourier transform infrared in the attenuated total reflection mode. The latter was used to monitor the competitive reactive processes and to quantify the conversions of the epoxide, lactone, and intermediate spiroorthoester groups. A partial depolymerization process from the cured material to free γ‐caprolactone was also identified. The formation of a stable carbocation and the coordinative capability of ytterbium triflate were the reasons for this unexpected process. The thermal and dynamic mechanical properties of the cured materials were determined with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical thermal analysis. An increase in the proportion of γ‐caprolactone resulted in an increased curing rate, a decrease in the shrinkage after gelation, and a significant decrease in the glass transition temperature. The introduction of ester linkages into the three‐dimensional structure led to more thermally degradable thermosets. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1968–1979, 2007     

Aggregation of amyloid Aβ(1–40) peptide in perdeuterated 2,2,2‐trifluoroethanol caused by ultrasound sonication

Ultrasound sonication of protein and peptide solutions is routinely used in biochemical, biophysical, pharmaceutical and medical sciences to facilitate and accelerate dissolution of macromolecules in both aqueous and organic solvents. However, the impact of ultrasound waves on folding/unfolding of treated proteins, in particular, on aggregation kinetics of amyloidogenic peptides and proteins is not understood. In this work, effects of ultrasound sonication on the misfolding and aggregation behavior of the Alzheimer's Aβ_(1–40)‐peptide is studied by pulsed‐field gradient (PFG) spin–echo diffusion NMR and UV circular dichroism (CD) spectroscopy. Upon simple dissolution of Aβ_(1–40) in perdeuterated trifluoroethanol, CF₃‐CD₂‐OD (TFE‐d₃), the peptide is present in the solution as a stable monomer adopting α‐helical secondary structural motifs. The self‐diffusion coefficient of Aβ_(1–40) monomers in TFE‐d₃ was measured as 1.35 × 10^?10 m² s^?1, reflecting its monomeric character. However, upon ultrasonic sonication for less than 5 min, considerable populations of Aβ molecules (ca 40%) form large aggregates as reflected in diffusion coefficients smaller than 4.0 × 10^?13 m² s^?1. Sonication for longer times (up to 40 min in total) effectively reduces the fraction of these aggregates in ¹H PFG NMR spectra to ca 25%. Additionally, absorption below 230 nm increased significantly upon sonication treatment, an observation, which also clearly confirms the ongoing aggregation process of Aβ_(1–40) in TFE‐d₃. Surprisingly, upon ultrasound sonication only small changes in the peptide secondary structure were detected by CD: the peptide molecules mainly adopt α‐helical motifs in both monomers and aggregates formed upon sonication. Copyright © 2010 John Wiley & Sons, Ltd.     

Properties of oxygen permeation and partial oxidation of methane in La0.6Sr0.4CoO3−δ (LSC)–La0.7Sr0.3Ga0.6Fe0.4O3−δ (LSGF) membrane

The oxygen separation membrane having perovskite structure for the partial oxidation of methane to synthesis gas was prepared. La_0.7Sr_0.3Ga_0.6Fe_0.4O_3−δ (LSGF) perovskite membrane coated with La_0.6Sr_0.4CoO_3−δ (LSC) (M1), and the one side of M1 membrane coated with NiO (M2) was prepared to examine the partial oxidation of methane. The single oxygen permeations of the LSC + LSGF (M1) membrane and NiO coated membrane (M2) were measured. The oxygen permeation flux in M1 membrane was higher than that of M1 membrane at 850 °C.

The partial oxidation experiment of methane using the prepared membranes was examined at 850 °C. The value of CH₄ conversion and CO selectivity of M2 membrane was higher than that of M1 membrane.

NiO/NiAl₂O₄ catalyst was used to improve the methane conversion, and the partial oxidation experiment of methane with M1 membrane was examined at 850 °C. The CH₄ conversion was 88%, and CO selectivity was 100%.