Fully aromatic poly(ether ketone)s bearing macrocycle pendants: Synthesis and crosslinking

This study reports a method to prepare fully aromatic poly(ether ketone) thermosets. The cyclization of 2′,5′‐dimethoxy[1,1′‐biphenyl]‐2,5‐diol and a difluoro monomer was carried out under pseudo high dilution condition. Two types of fully aromatic poly(ether ketone)s with macrocycle were successfully prepared by copolymerization of macrocycle of aryl ether ketone containing hydroxyphenyl groups, 4,4′‐(hexafluoroisopropylidene)diphenol (HFBPA), and 4,4‐difluorobenzophenone. The obtained copolymers have high molecular mass, good solubility, and high glass transition temperatures in the presence of CsF, the crosslinking reaction of copolymers occurred and afforded fully aromatic thermoset poly(aryl ether ketone)s by ring‐opening reaction driven by entropy. After crosslinking, these copolymers show much higher glass transition temperatures, excellent thermal stability, and better mechanical strength. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7002–7010, 2008     

Modification of sulfonated poly(ether ether ketone) with phenolic resin

Soluble phenol formaldehyde resin containing hydroxymethyl groups has been used to modify sulfonated poly(ether ether ketone) (SPEEK). Modification has been carried out with films containing both the polymers and using dimethyl formamide (DMF) as casting solvent at various temperatures under reduced pressure. Associated solvent and the hydrogen‐bonded by‐product dimethyl amine (DMA) were removed through mild alkali–acid–water treatment. Cured and treated films show good and consistent mechanical properties, water uptake (22–25%), ion‐exchange capacity (1.1–1.5 meq/g) and proton conductivity (125–150 mS/cm) at 30°C and hold promise for application in fuel cells, as indicated by a polarization study in a fuel cell test station. Copyright © 2007 John Wiley & Sons, Ltd.     

气相色谱法探究聚醚醚酮的热降解及热氧化降解（英文）

Poly(ether ether ketone)(PEEK)was synthesized via polycondensation of hydroquinone with 4,4′-difluorobenzophenone at 320℃for 5 h.Thermal and thermo-oxidative degradation of PEEK was studied over a wide range of temperatures.In an inert medium,decomposition of the polymer occurred in one stage,with the formation of a coke residue accounting for approximately 50%of the original polymer mass.In air,the mass loss curve exhibited two distinct stages.The first stage involved breakdown of the main polymer chain,the speed of which indicated a radical chain failure mechanism.In the second stage,the rate of mass loss clearly decreased,indicating a transition from the radical chain failure mechanism to simple combustion reactions(wherein the polymer combusted completely).To further investigate the nature of the processes occurring during the pyrolysis of PEEK,the investigations were carried out using gas chromatograph under isothermal conditions.It was concluded that during thermal degradation,the decomposition of the polymer starts with the rupture of ketone and ether bonds and proceeds to destruction of the benzene ring at higher temperatures,which is accompanied by the formation of H2O and CH4.Above 500℃,the polymer degradation further involved thermohydrolysis.The thermo-oxidation of PEEK,which was accompanied mainly by the formation ofH2,was noticeable beginning at 325℃.The total yield of the latter indicated oxidation of fragments of the benzene ring.     

Temperature-sensitive poly(vinyl methyl ether) hydrogel beads

Temperature-sensitive hydrogel beads were prepared by radiation crosslinking of poly(vinyl methyl ether) PVME spheres wrapped in Ca-alginate. The obtained gel beads have diameters in the sub-millimeter or millimeter range (depending on the PVME concentration). They were characterized by sol-gel analysis, swelling measurements, and differential scanning calorimetry. The gel content g increases with increasing radiation dose D. The swelling degree Q_v decreases with increasing PVME concentration c_p and increasing D. In comparison to PVME bulkgels the phase-transition temperature of the synthesized PVME gel beads is a little decreased.     

Synthesis and properties of hyperbranched poly(ether sulfone)s prepared by self‐polycondensation of novel AB2 monomer

Hyperbranched poly(ether sulfone)s were prepared by the self‐polycondensation of the novel AB₂ monomer, 4‐(3,5‐hydroxyphenoxy)‐4′‐fluorodiphenylsulfone. The high‐molecular‐weight polymers were isolated in good yields. The degree of branching (DB) of the resulting polymers was investigated by the preparation of dendritic and linear model compounds. The DB determined by gated decoupling ¹³C NMR measurements was in the range 0.17–0.41 and was dependent on the base used for the self‐polycondensation. It was found that cesium fluoride was an effective base to form the polymer having the DB of 0.41. The resulting hyperbranched poly(ether sulfone)s showed good solubility in organic solvents. The solubility and the glass transition temperature of the polymers were influenced by the terminal functional groups. The unique thermal crosslinking phenomenon was observed during the DSC measurements of the hydroxyl‐terminated hyperbranched poly(ether sulfone) under air condition. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,characterization, and antimicrobial activity of some novel poly(ether ketone)s

Low molecular weight poly(ether ketone)s were synthesized from phenol, 1,4‐phenylenedioxy diacetylchloride, chloroacetylchloride, and dichloroalkanes [1,2‐dichloroethane and dichloromethane] by a Friedel–Crafts reaction with anhydrous aluminum chloride as a catalyst and carbon disulfide as a solvent. The conditions for the preparation of the poly(ether ketone)s and the chlorine contents obtained with the Carius method were examined, and a reaction scheme for each resin was established. The molecular weights and polydispersities of the resins were obtained by gel permeation chromatography. The polyketones were characterized by IR spectroscopy. The characteristic frequencies due to different functional groups were assigned. The thermal properties of the resins were studied with thermogravimetry and differential scanning calorimetry. The characteristic temperatures of thermal degradation for the poly(ether ketone)s were evaluated with thermogravimetric analysis. The kinetic parameters for the decomposition reactions of the resins were obtained with Broido and Doyle's method, and the heats of fusion were obtained from differential scanning calorimetry thermograms. The polyketones were thermally stable up to 200 °C. All the polyketones were tested for their microbial properties against bacteria, fungi, and yeast. The effect of poly(ether ketone)s on the growth of these microorganisms was investigated, and the polyketones were found to inhibit the growth of the microorganisms to a considerable extent. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2335–2344, 2003     

Facile synthesis and characterization of hyperbranched poly(ether amide)s generated from Michael addition polymerization of in situ created AB2 monomers

A new straightforward strategy for synthesis of novel hyperbranched poly (ether amide)s from readily available monomers has been developed. By optimizing the reaction conditions, the AB₂‐type monomers were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to further polymerization in the presence (or absence) of an initiator, to prepare the hyperbranched polymer‐bearing multihydroxyl end‐groups. The influence of monomer, initiator, and solvent on polymerization and the molecular weight (MW) of the resultant polymers was studied thoroughly. The MALDI–TOF MS of the polymers indicated that the polymerization proceeded in the proposed way. Analyses of ¹H NMR and ¹³C NMR spectra revealed the branched structures of the polymers obtained. These polymers exhibit high‐moderate MWs and broad MW distributions determined by gel permeation chromatography (GPC) in combination with triple detectors, including refractive index, light scattering, and viscosity detectors. In addition, the examination of the solution behavior of these polymers showed that the values of intrinsic viscosity [η] and the Mark–Houwink exponent α were remarkably lower compared with their linear analogs, because of their branched nature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4309–4321, 2007     

Synthesis of thermally crosslinkable fluorine‐containing poly(arylene ether ketone)s—II. Propargyl ether terminated poly(arylene ether ketone)s

Novel thermally crosslinkable fluorine‐containing poly(arylene ether ketone)s comprised of 2,3,5, 6‐tetrafluoro‐1,4‐phenylene moiety were synthesized by the termination of polymer chain ends with propargyl ether groups in order to improve solvent resistance. Crosslinking reaction occurred over 250°C through the formation of both chromen ring and polyene structure. This structure change brought about not only the outstanding solvent resistance but also the increase in glass transition temperature (T_g). The cured films also exhibited excellent thermal stability, transparency and hydrophobicity derived from fluorine atoms. Copyright © 2004 John Wiley & Sons, Ltd.     

3种新型聚苯基醚喹噁啉的合成

用4,4′-二氟代二苯甲酰与双酚A的溶液缩聚制得聚醚苯偶酰(PEB),经邻苯二胺改性后,通过两步法得到聚苯基醚喹噁啉（PEQ-1）。 在PEB的改性反应中加入质量分数分别为1.0%和1.3%的3,3′,4,4′-四胺基二苯醚,可有效增加聚苯基醚喹噁啉的相对分子质量,得到PEQ-2和PEQ-3（总收率≥90%）,其质均相对分子质量分别为7.492×104和1.486×105。 并用IR、 NMR等对这些聚合物进行了表征。 该法操作简便,具有潜在的应用价值。     

Glass transition and miscibility in blends of two semicrystalline polymers: Poly(aryl ether ketone) and poly(ether ether ketone)

Binary melt‐blended mixtures of two aryl ether ketone polymers (i.e., a new poly(aryl ether ketone) (code name PK99) and poly(ether ether ketone) (PEEK), have been studied. Polymer miscibility in glassy amorphous (or melt) domains has been demonstrated for the binary blend comprising of two aryl‐ether‐ketone‐type semicrystalline polymers. Composition‐dependent, single T_g was observed within full composition range in the PK99/PEEK blends, and the narrow T_g breadth also suggests that the scale of mixing was fine and uniform. To better resolve any possible overlapping T_g's, physical aging was imposed on a comparison set of blend samples for the purpose of improving detectability of overlapped multiple transitions if existing. The result still showed one single T_g. The relative sharp T_g and lack of cloud point transition suggest that the scale of molecular intermixing is good. Phase homogeneity was further confirmed using optical and scanning electron microscopy. The X‐ray diffractograms suggest that isomorphism does not exist in the PK99/PEEK blends and that the crystal forms of the respective polymers remain distinct and unchanged by the miscibility in the amorphous region. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1485–1494, 1999     

Synthesis and characterization of poly(ether naphthalimide)s

A series of new poly(ether imide)s containing the naphthalimide moiety were prepared from bis(4-fluorobenzoyl)naphthalimides and several bisphenols by aromatic nucleophilic displacement polymerization. These polyimides had inherent viscosities in the range of 0.31–1.04 dL/g in chloroform and glass transition temperatures of 283.0–341.6°C by differential scanning calorimetry. The onset temperature for 5% weight loss for all the polymers was over 448°C, as assessed by thermogravimetry at a heating rate 10°C/min in nitrogen. In addition, these novel polyimides exhibited good solubility in organic solvents including N-methyl-2-pyrrolidone, N,N-dimethylformamide, N,N-dimethylacetamide, 1,1,2,2-tetrachloroethane and chloroform. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3227–3231, 1999     

Microcellular processing and relaxation of poly(ether ether ketone)

The semicrystalline microcellular closed‐cell foams are prepared by a two‐stage batch foaming process from poly(ether ether ketone) and characterized by scanning electronic microscopy. It can be observed that there are two kinds of cells with obviously different cellular sizes in the same transect and the distribution of larger cells (about 7 μm) looks like sandwich. The effects of foaming temperatures and transfer times on the cellular sizes and cell densities of porous materials were discussed. Particular emphasis was given to the effects of crystalline on the microcellular morphology. The relaxation mechanism of microcellular materials was systemically investigated by dynamic mechanics analysis. A plain on the storage modulus curve before T_g was observed due to the densification of cells. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2890–2898, 2007     

Thermal conductivity of poly(ether ether ketone) and its short-fiber composites

The effects of crystallinity, orientation, and short-fiber filler on the thermal diffusivity D and thermal conductivity K of poly (ether ether ketone) (PEEK) have been studied. Below the glass transition, D increases by less than 10% as the crystallinity increases from 0 to 0.3. For amorphous PEEK, there is an abrupt drop in D at the glass transition (T_g ? 420 K). The drop is less prominent for the 30% crystalline sample and occurs at 20 K higher. At a draw ratio of 2.5, the axial thermal conductivity is 2.3 times higher while the transverse thermal conductivity is 30% lower than that of the unoriented material. For an injection-molded bar of carbon fiber reinforced PEEK, the variation of D with position along the width or thickness direction is found to correlate well with the fiber orientation. By regarding the injection-molded bar as a multidirectional laminate comprising a large number of unidirectional plies, the thermal conductivities along the longitudinal and transverse direction are calculated and found to agree closely with the experimental data. © 1994 John Wiley & Sons, Inc.     

Sequence analysis of poly (ether sulfone) copolymers by 13C NMR

Random and block copolymers of poly (ether sulfone) (PES) and poly (ether ether sulfone) (PEES) were synthesized by the nucleophilic polycondensation of 4,4′‐dichlorodiphenyl sulfone (DCDPS) with 4,4′‐dihydroxydiphenyl sulfone (DHDPS) and hydroquinone (HQ). Chemical structures of these copolymers were characterized by ¹³C NMR. The monomer molar fraction, sequential distribution, and degree of randomness of the copolymers were determined through analyses of the resonances of quaternary carbons in the DCDPS unit. Experimental results show that the molar fractions of the comonomer determined by ¹³C NMR analyses are close to the charged values in the synthetic step. Moreover, these copolymers, which were prepared by different polymerization methods, revealed different number‐average sequential length and degree of randomness. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1624–1630, 2005     

Poly(ether ether ketone)/poly(aryl ether sulfone) blends: Melt rheological behavior

Dynamic rheological measurements were carried out on blends of poly(ether ether ketone) (PEEK)/poly(aryl ether sulfone) (PES) in the melt state in the oscillatory shear mode. The data were analyzed for the fundamental rheological behavior to yield insight into the microstructure of PEEK/PES blends. A variation of complex viscosity with composition exhibited positive–negative deviations from the log‐additivity rule and was typical for a continuous‐discrete type of morphology with weak interaction among droplets. The point of transition showed that phase inversion takes place at composition with a 0.6 weight fraction of PEEK, which agreed with the actual morphology of these blends observed by scanning electron microscopy. Activation energy for flow, for blend compositions followed additive behavior, which indicated that PEEK/PES blends may have had some compatibility in the melt. Variation of the elastic modulus (G′) with composition showed a trend similar to that observed for complex viscosity. A three‐zone model used for understanding the dynamic moduli behavior of polymers demonstrated that PEEK follows plateau‐zone behavior, whereas PES exhibits only terminal‐zone behavior in the frequency range studied. The blends of these two polymers showed an intermediate behavior, and the crossover frequency shifted to the low‐frequency region as the PEEK content in PES increased. This revealed the shift of terminal‐zone behavior to low frequency with an increased PEEK percentage in the blend. Variation of relaxation time with composition suggested that slow relaxation of PEEK retards the relaxation process of PES as the PEEK concentration in the blend is increased because of the partial miscibility of the blend, which affects the constraint release process of pure components in the blend. A temperature‐independent correlation observed in the log–log plots of G′ versus loss modulus (G″) for different blend systems fulfilled the necessary condition for their rheological simplicity. Further, the composition‐dependent correlations of PEEK/PES blends observed in a log–log plot of G′ versus G″ showed that the blends are either partially miscible or immiscible and form a discrete‐continuous phase morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1548–1563, 2004     

聚醚醚酮醚酮的合成与表征

聚醚醚酮（ＰＥＥＫ）自工业化以来［１］，由于其优异的性能已在机械、航天等领域得到广泛应用．各种聚芳醚酮类聚合物相继被开发出来．但以亲电缩聚路线制备聚醚醚酮醚酮（ＰＥＥＫＥＫ）的报道较少［２］．本文以二苯醚和４－氟苯甲酰氯为主要反应试剂，采取付氏酰基化...     

Partially fluorinated sulfonated poly(arylene sulfone)s blended with polybenzimidazole

A partially fluorinated and sulfonated poly(arylene sulfone) (SPSO) was successfully synthesized via nucleophilic polycondensation of 2,2‐bis(4‐fluorophenyl)hexafluoro‐propane with 4,4′‐thiobisbenzenethiol (TBBT). In a second step, the prepared poly(arylene sulfide) was oxidized to SPSO. The polymer was blended with the polybenzimidazole PBIOO^® to obtain a mechanically stable membrane. This film was compared with other polymer blends, which were synthesized in our group in the last years. We were especially interested in the influence of different bridging groups such as ether, ketone, and sulfone groups. The affect on properties such as water uptake (WU), thermal stability, proton conductivity, and oxidative stability were analyzed in this work. Additionally, the blend membranes were characterized by gel permeation chromatography. The novel SPSO blend shows a high molecular weight, and its blend membrane with PBIOO has an excellent onset of ? SO₃H group splitting‐off temperature (T_onset) of 334 °C. The proton conductivity amounts to 0.11 S cm^?1, and the water uptake reaches 30%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and crosslinking of poly (aryl ether)s containing 1,1-diphenylethylene moieties

Poly (aryl ether)s containing the diphenylethylene moiety, synthesized from 1,1-bis(4-fluo-rophenyl)ethylene or 1,1-bis(4-hydroxyphenyl)ethylene, are thermally crosslinkable. Char-acterization and crosslinking studies of these polymers were carried out by GPC, DSC, TGA, and NMR. The solvent resistance and T_g's of the resulting crosslinked networks increase after crosslinking. Thermogravimetric analysis shows that no significant mass loss accompanies the crosslinking reaction. © 1995 John Wiley & Sons, Inc.     

Self-Crosslinkable poly(arylene ether)s containing pendent phenylenetriazene groups

Self-crosslinkable poly(arylene ether)s 6 , and 8 , containing pendent triazene groups were prepared by nucleophilic substitution reaction of poly(arylene ether)s 5 , and 7 , respectively, with 1-[4-(4-hydroxyphenoxy)phenylene]triazenes, 4 , in the presence of potassium carbonate in N,N-dimethylacetamide. A series of triazenes 4 containing various substituents have been synthesized. Self-crosslinkable polymer 6e containing phenyl-substituted triazene pendants can be crosslinked at 215°C, which is about 40°C lower than the glass transition temperature of the virgin base polymer 5 . The degree of crosslinking can be tailored by varying the concentration of the pendent phenylenetriazene groups in the polymer. After curing, the flexible polymer films (ca. 10 μm thick) exhibit high gel contents, increased glass transition temperatures, improved resistance to organic solvents, and little change in dielectric constant and thermal stability. These self-crosslinkable poly(arylene ether)s are potential candidates for electronic applications. © 1994 John Wiley & Sons, Inc.     

The double-melting behavior of poly(ether diphenyl ether ketone)

Poly(ether diphenyl ether ketone) (PEDEK) synthesized by the nucleophilic route has the following chemical structure: At some given temperatures for a given time isothermally crystallized PEDEK sample exhibits two endothermic peaks which are similar to PEEK and PEEKK. The melting behavior of PEDEK crystallized from the glassy state is investigated through differential scanning calorimeter (DSC). We consider that the high-melting peak is related to the perfect crystals and the low-melting peak is associated with a few imperfect crystals. © 1997 John Wiley & Sons, Inc.