New Fluorinated Poly(imide siloxane) Random and Block Copolymers with Variation of Siloxane Loading

Several new random and block copoly(imide siloxane)s have been prepared by the solution polycondensation of commercially available 4,4′-oxydianiline (ODA) and amino-propyl terminated polydimethylsiloxane (APPS) with 4,4′-(hexafluoro-isopropylidene)diphthalic anhydride (6FDA). The siloxane loading was kept to 10, 20, 30, 40 and 50 wt% in the copolymers. The random copolymers were prepared by a one pot solution imidization technique, and two pot solution imidization technique was adopted for the synthesis of the block copolymers. The diamine ODA and the dianhydride 6FDA composed the hard block segment, while APPS and 6FDA composed the soft block segment. The hard block length was kept constant while the soft block lengths were varied by varying the siloxane loading. Accordingly, block copoly(imide siloxane)s were prepared on increasing the soft block lengths (DP) from 3 to 6, 10, 18 and 36 for fixed hard block length of 22. The resulting polymers have been well characterized by IR, NMR and GPC techniques. Thermal and mechanical properties of the random and block copolymers were compared with the already reported homopolyimide without siloxane moiety.     

Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Five new block copoly(imide siloxane)s have been prepared by reacting two different diamines, 4,4″-bis(p-aminophenoxy)-3,3″-trifluoromethyl terphenyl (APTTFT) and amino-propyl terminated polydimethylsiloxane (APPS), separately with 4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride); BPADA. The reactions were conducted by a two pot solution imidization technique. The diamine APTTFT and the dianhydride BPADA composed the hard block segment while APPS and BPADA composed the soft block segment. The soft and hard blocks of different block lengths were generated by different stoichiometric imbalance in two different flasks and the final polymers were obtained by reacting both the blocks together. Different block copoly(imide siloxane)s were prepared on increasing the hard block lengths (DP) from 7 to 12, 18, 23 and 28 and the soft block lengths (DP) from 4 to 6, 8, 10 and 12, respectively. The resulting polymers have been well characterized by NMR, DSC and DMA techniques. The properties of the block copolymers were compared with the analogous random copolymers and homopolyimide prepared without APPS.     

Structure–property co‐relationship of fluorinated poly(imide‐siloxane)s

Eight poly(imide‐siloxane)s co‐polymers have been prepared by one pot solution imidization method. The polymers are synthesized by the reaction of bisphenol‐A‐dianhydride (BPADA) with fluorinated diamine 4,4′‐bis(3″‐trifluoromethyl‐p‐aminobiphenyl ether) biphenyl, and aminopropyl‐terminated polydimethylsiloxane (APPS). The polymers are synthesized by varying the siloxane loading to 5, 10, 15, 20, 25, 30, 35, and 40 wt%, respectively. Thermal, mechanical, rheological, and dielectric properties of these polymers have been evaluated with respect to siloxane loading. The polymers showed glass transition temperature of 107–203°C and tensile strength at break of 24–75 MPa depending on siloxane loading. The elongation break of the polymers ranges from 24 to 144% depending on siloxane loading. The amounts of char residue in the polymers have been correlated with incorporated siloxane in the polymer by NMR techniques. The polymers showed very low water absorption and dielectric constant as low as 2.43 when the siloxane loading is 40 wt%. Copyright © 2008 John Wiley & Sons, Ltd.     

Morphology and properties of polycaprolactone-poly(dimethyl siloxane)-polycaprolactone triblock copolymers

The molecular structure, crystallization, solid-state morphology, thermal properties, and phase behavior of two copolymers consisting of a poly(dimethylsiloxane) (PDMS) mid-block coupled to polycaprolactone (PCL) end-blocks were investigated. Both copolymers (which differ only in the molecular lengths of the PCL end-blocks) were found to be lamellar systems, whose core consists of PCL chains having the same crystal structure as PCL homopolymer, and whose amorphous interlayers contain the PDMS blocks and the PCL noncrystalline segments. From x-ray and electron-microscopy results, it is expected that the PCL blocks may be folded once in the longer copolymer and not at all in the shorter. As a result of their differing PCL lengths, the former crystallizes as regular PCL spherulites (at a growth rate reduced with respect to PCL homopolymer), whereas the latter yields only defective, immature axialites of low overall crystallinity. Electron diffraction showed that these spherulites grow preferentially along b crystallographic axis and that the PCL crystalline stems are arranged perpendicularly to their lamellae. © 1993 John Wiley & Sons, Inc.     

Synthesis,structure, and properties of polyimide and polyurethane‐urea‐imide copolymers

Several, novel polyimide–polyurethane‐urea‐imide (PI‐PUI) copolymers with different polyimide (PI) contents were prepared by an in situ interpenetrating reaction between polyurethane‐urea‐imide (PUI) precursor and poly(amide acid). Changing the ratio of the PUI precursor and poly(amide acid) resulted in a change of the properties of the PI‐PUI copolymers from plastic to elastomer. Fourier transform infrared spectra revealed the characteristic absorption bands of PI‐PUI copolymers; differential scanning calorimetry (DSC) analyses revealed that the glass‐transition temperature of the soft‐segment‐rich phase decreased as the PI content increased in PI‐PUIs, meaning that the soft segments (i.e., PEG) were more incompatible and had better crystallizability with a high‐PI‐segment content in PI‐PUI. Wide‐angle X‐ray diffraction curves exhibited more ordered structure within the disordered PI‐PUI copolymer's state with an increasing PI content, which further agreed with the DSC results. Scanning electron micrographs clearly showed that the molecular chains in PI‐PUI with a high‐PI‐content packed, ordered lamellar structure. Thermogravimetric curves indicated that the heat resistance of PI‐PUI was better than pure PUI. The introduction of the PI component into PUI by an in situ interpenetrating reaction method is an effective way to improve the thermal stability and solvent resistance of PUI. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 216–225, 2004     

Preparation and properties of polybenzoxazine/poly(imide‐siloxane) alloys: In situ ring‐opening polymerization of benzoxazine in the presence of soluble poly(imide‐siloxane)s

Benzoxazine monomer (Ba) was blended with soluble poly(imide‐siloxane)s in various weight ratios. The soluble poly(imide‐siloxane)s with and without pendent phenolic groups were prepared from the reaction of 2,2′‐bis(3,4‐dicarboxylphenyl)hexafluoropropane dianhydride with α,ω‐bis(aminopropyl)dimethylsiloxane oligomer (PDMS; molecular weight = 5000) and 3,3′‐dihydroxybenzidine (with OH group) or 4,4′‐diaminodiphenyl ether (without OH group). The onset and maximum of the exotherm due to the ring‐opening polymerization for the pristine Ba appeared on differential scanning calorimetry curves around 200 and 240 °C, respectively. In the presence of poly(imide‐siloxane)s, the exothermic temperatures were lowered: the onset to 130–140 °C and the maximum to 210–220 °C. The exotherm due to the benzoxazine polymerization disappeared after curing at 240 °C for 1 h. Viscoelastic measurements of the cured blends containing poly(imide‐siloxane) with OH functionality showed two glass‐transition temperatures (T_g's), at a low temperature around ?55 °C and at a high temperature around 250–300 °C, displaying phase separation between PDMS and the combined phase consisting of polyimide and polybenzoxazine (PBa) components due to the formation of AB‐crosslinked polymer. For the blends containing poly(imide‐siloxane) without OH functionalities, however, in addition to the T_g due to PDMS, two T_g's were observed in high‐temperature ranges, 230–260 and 300–350 °C, indicating further phase separation between the polyimide and PBa components due to the formation of semi‐interpenetrating networks. In both cases, T_g increased with increasing poly(imide‐siloxane) content. Tensile measurements showed that the toughness of PBa was enhanced by the addition of poly(imide‐siloxane). Thermogravimetric analysis showed that the thermal stability of PBa also was enhanced by the addition of poly(imide‐siloxane). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2633–2641, 2001     

Synthesis and characterization of poly[styrene‐b‐methyl(3,3,3‐trifluoropropyl)siloxane] diblock copolymers via anionic polymerization

A series of narrow molecular weight distribution (MWD) polystyrene‐b‐poly[methyl(3,3,3‐trifluoropropyl)siloxane] (PS‐b‐PMTFPS) diblock copolymers were synthesized by the sequential anionic polymerization of styrene and trans‐1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane in tetrahydrofuran (THF) with n‐butyllithium as the initiator. The diblock copolymers had narrow MWDs ranging from 1.06 to 1.20 and number‐average molecular weights ranging from 8.2 × 10³ to 37.1 × 10³. To investigate the properties of the copolymers, diblock copolymers with different weight fractions of poly[methyl(3,3,3‐trifluoropropyl)siloxane] (15.4–78.8 wt %) were prepared. The compositions of the diblock copolymers were calculated from the characteristic proton integrals of ¹H NMR spectra. For the anionic ring‐opening polymerization (ROP) of 1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane (F₃) initiated by polystyryllithium, high monomer concentrations could give high polymer yields and good control of MWDs when THF was used as the polymerization solvent. It was speculated that good control of the block copolymerization under the condition of high monomer concentrations was due to the slowdown of the anionic ROP rate of F₃ and the steric hindrance of the polystyrene precursors. There was enough time to terminate the ROP of F₃ when the polymer yield was high, and good control of block copolymerization could be achieved thereafter. The thermal properties (differential scanning calorimetry and thermogravimetric analysis) were also investigated for the PS‐b‐PMTFPS diblock copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4431–4438, 2005     

The influence of soft segments on some properties of new transparent segmented polyurethanes

This work describes the synthesis and structure of the new segmented polyurethanes (SPURs) formed from an aliphatic diisocyanate [1,1′‐methanediylbis(4‐isocyanatocyclohexane] (Desmodur W^®) and unconventional sulfur‐containing chain extender [2,2′‐methylenebis([4,1‐phenylene]methylenesulfanediyl)diethanol]. Soft segments were poly(oxytetramethylene)diol of  = 1000 g/mol (PTMO) or poly(hexametylene carbonate)diol of  = 860 g/mol (PHCD). For all the polymers, the structure, physicochemical, thermal, and mechanical properties were determined. In addition, for selected polymers, optical properties (refractive index and transparency), adhesive properties, and antimicrobial activity were also determined. The type and amount of soft segment used for the synthesis of SPURs had a significant effect on the properties of the polymers. SPURs from PHCD are characterized by higher glass transition temperatures, molar masses, hardness (up to 91/50°Sh in scale A/D), and tensile strengths (up to 36.5 MPa) but lower elongations at break compared with the SPURs with PTMO. The tests of adhesion and optical properties showed that the PHCD‐based SPUR was characterized by higher value of refractive index, transparency, and more than three times the adhesive strength than the PTMO‐based SPUR. Antimicrobial activity studies showed that the SPUR presence in the medium inhibited proliferation of both Gram‐positive and Gram‐negative bacteria. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis and properties of polystyrene/polydimethylsiloxane graft copolymers

Polystyrene-graft-polydimethylsiloxane (PS-g-PDMS) copolymers with different PDMS content were synthesized by the radical bulk copolymerization of PDMS macromonomer and styrene. The copolymers were characterized by Fourier transform infrared (FT-IR), ¹H-nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), transmission electron microscopy (TEM) and the mechanical properties of the copolymers were also carried out. It was indicated that the notched impact strength and elongation at break of the polymers increased with the increase of PDMS content. The thermal stability of PS-g-PDMS is better than that of PS. __________ Translated from Journal of East China University of Science and Technology 2005, 31(2) (in Chinese)     

Synthesis and characterization of siloxane resins derived from silphenylene‐siloxane copolymers bearing benzocyclobutene pendant groups

Two bis(dimethylamimo)silanes with benzocyclobutene (BCB) groups, bis(dimethylamino)methyl(4′‐benzocyclobutenyl)silane ( 2 ) and bis(dimethylamino)methyl [2′‐(4′‐benzocyclobutenyl)vinyl]silane ( 4 ), were synthesized from different synthetic routes, which were then employed to prepare two novel silphenylene‐siloxane copolymers (SiBu and SiViBu) bearing latent reactive BCB groups by polycondensation procedure with 1,4‐bis(hydroxydimethylsilyl)benzene. At elevated temperatures these copolymers were readily converted to highly crosslinked films and molding disks with network structures by polymer chain crosslinking, which followed the first‐order kinetic reaction model. The final resins of SiBu and SiViBu demonstrated excellent thermal stability with high glass transition temperatures (218 and 256 °C) and high temperatures at 5% weight loss (553 and 526 °C in N₂, 530 and 508 °C in air). After aging at 300 °C in air for 100 h, the cured resins showed weight loss lower than 4%. The films of cured SiBu and SiViBu also exhibited relatively low dielectric constants of 2.66 and 2.64, low dissipation factors of 2.23 and 2.12 × 10^?3, low water absorptions (≤0.28%), and high transparence in the visible region with cutoff wavelengths of 321 and 314 nm. Moreover, the aged films exhibited good dielectric properties and low water absorptions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7868–7881, 2008     

New fluorinated thermoplastic elastomers. III. Novel method of synthesis and characterization of alternating fluorinated polyimide/fluorinated polyhybridsiloxane block copolymers via polycondensation

The synthesis of fluorinated polyimide/fluorinated polyhybridsiloxane (FPI–FPHSX) block copolymers was achieved through the polycondensation of α,ω‐dichlorosilane fluorinated polyimides and α,ω‐disilanol fluorinated polyhybridsiloxanes. Three FPI–FPHSX block copolymers with 41, 50, and 76 wt % polyimide were synthesized and characterized by the tuning of the number‐average molecular weight of the soft polyhybridsiloxane segments. The influence of the soft‐segment length on the behavior of the thermoplastic elastomer material was studied, including the surface tension and thermal properties. The thermomechanical properties of the FPI–FPHSX block copolymers were also examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2237–2247, 2005     

Preparation and characterization of polyimide alternating copolymers incorporating N,N′-bis-(4-anilino)-1,2,4,5-benzene bis(dicarboximide)

N,N′-Di-(4-anilino)-1,2,4,5-benzene bis(dicarboximide) was prepared in a three-step synthesis and purified by heating the resulting solid to 200°C. Condensation of the diamino-diimide with several dianhydrides (BPDA, BTDA, and 6-FDA) yielded polyamic acid-imides that could be either thermally or chemically cured to the corresponding alternating copolyimides. Imidization of the polyamic acid-imide to the final polyimide was monitored by FTIR for samples coated on silicon wafers before being thermally cured. Polyimides prepared by chemical imidization were found by thermogravimetric analysis to be stable to temperatures of 600°C. © 1997 John Wiley & Sons, Inc.     

Synthesis and characterization of novel h‐HTBN/PEG PU copolymers for tissue engineering: degradation,phase behavior,and mechanical properties

The phase behavior of the as‐prepared polyether polyurethane (PU) elastomers was investigated by dynamic mechanical analysis (DMA), polarized optical microscope (POM), and atomic force microscopy (AFM). This PU copolymers were composed of different compositions of two soft segments, poly(ethylene glycol) (PEG) and hydrolytically modified hydroxyl‐terminated poly(butadiene‐co‐acrylonitrile) (h‐HTBN) oligomers. The microphase separation behavior is confirmed to occur between soft and hard segments as well as soft and soft segments as the h‐HTBN is incorporated into the PU system, depending on soft‐soft and/or soft‐hard microdomain composition, molecular weight (MW) of PEG, and hydrolysis time of HTBN. The driving force for this phase separation is mainly due to the formation of inter‐ and intramolecular hydrogen bonding interaction. The PU‐70, PU‐50 samples with non‐reciprocal composition seem to exhibit larger microphase separation than any other PU ones. The hydrolysis degradation, thermal stability, and mechanical properties of the copolymers were assessed by gravimetry, scanning electron microscope (SEM), thermal gravity analysis (TGA), and tensile test, respectively. The experimental results indicated that the incorporation of h‐HTBN soft segment into PEG as well as low MW of PEG leads to increased thermal and degradable stability based on the intermolecular hydrogen bond interaction. The PU‐70 and PU‐50 copolymers exhibit better mechanical properties such as high flexibility and high ductility because of their larger microphase separation architecture with the hard domains acting as reinforcing fillers and/or physical crosslinking agents dispersed in the soft segment matrix. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of anionic graft copolymers containing poly(ethylene oxide) grafts

Anionic graft copolymers were synthesized through grafting of poly(ethylene glycol) monomethyl ether (MPEG) onto terpolymers containing succicinic anhydride groups. The backbone polymers were prepared through radical terpolymerization of maleic anhydride, styrene, and one of the following monomers: methyl methacrylate, ethylhexyl methacrylate, and diethyl fumarate. MPEG of different molecular weights were grafted onto the backbone through reactions with the cyclic anhydride groups. In this reaction one carboxylic acid group is formed together with each ester bond. The molecular weights of MPEG were found to influence the rate of the grafting reaction and the final degree of conversion. The graft copolymers were characterized by IR, GPC, and ¹H-NMR. Thermal properties were examined by DSC. Graft copolymers containing 50% w/w of MPEG 2000 grafts were found to be almost completely amorphous, presumably because of crosslinking, and hydrogen bonding between carboxylic acid groups in the backbone and the ether oxygens in MPEG grafts. © 1995 John Wiley & Sons, Inc.     

Properties of well‐defined alternating and random copolymers of methacrylates and styrene prepared by controlled/living radical polymerization

The physical properties of well‐defined alternating copolymers poly(methyl methacrylate‐alt‐styrene) and poly(n‐butyl methacrylate‐alt‐styrene), prepared by reversible addition–fragmentation chain transfer polymerization in the presence of Lewis acids, were investigated with differential scanning calorimetry, wide‐angle X‐ray scattering, and dynamic mechanical measurements. The properties were compared with those of random copolymers of the same overall composition and the corresponding homopolymers. Wide‐angle X‐ray scattering data showed that the alternating copolymers possessed a more regular comonomer sequence than the random copolymers. The thermomechanical properties of alternating copolymers and random copolymers were quite similar and typical for amorphous polymers, but in one of the cases studied the glass‐transition temperature for alternating copolymer was remarkably higher than for the random copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3440–3446, 2005     

Synthesis and characterization of bismaleimide–polyurethane crosslinked copolymers

A series of novel crosslinked copolymers of bismaleimide (BMI) and polyurethanes (PU) were prepared by direct copolymerization of BMI monomer and urethane-modified bismaleimide (UBMI). The copolymers were characterized by FT-IR and solid state ¹³C-NMR. The reaction rate of the BMI monomer can be significantly increased by copolymerization with UBMI. The crosslinked copolymers show good mechanical properties and high thermal stability. Studies on glass transition temperatures and dynamic mechanical properties indicate that the copolymer is a homogeneous system as the polyester-type PU employed. The transmission electron microscopy (TEM) of the copolymer illustrated a one-phase structure of the cured resins when the polyester-type PU was incorporated. © 1995 John Wiley & Sons, Inc.     

Effect of comonomer on thermal/mechanical and shape memory property of L‐lactide‐based shape‐memory copolymers

In this study, three kinds of L ‐lactide‐based copolymers, poly(lactide‐co‐glycolide) (PLGA), poly(lactide‐co‐p‐dioxanone) (PLDON) and poly(lactide‐co‐caprolactone) (PLC), were synthesized by the copolymerization of L ‐lactide (L) with glycolide (G), or p‐dioxanone (DON) or ε‐caprolactone (CL), respectively. The copolymers were easily soluble in common organic solvents. The compositions of the copolymers were determined by ¹H‐NMR. Thermal/mechanical and shape‐memory properties of the copolymers with different comonomers were compared. Moreover, the effect of the chain flexibility of the comonomers on thermal/mechanical and shape‐memory properties of the copolymers were investigated. The copolymers with appropriate lactyl content showed good shape‐memory properties where both the shape fixity rate (R_f)and the shape recovery rate (R_r) could exceed 95%. It was found that the comonomers with different flexible molecular chain have different effects on their thermal/mechanical and shape‐memory properties. Among them, PLGA has the highest mechanical strength and recovery rate while PLC copolymer has high recovery rate when the lactyl content exceeded 85% and the lowest transition temperature (T_trans). Copyright © 2007 John Wiley & Sons, Ltd.     

Ion transport properties of mechanically stable symmetric ABCBA pentablock copolymers with quaternary ammonium functionalized midblock

Anion exchange membranes (AEMs) are a promising class of materials for applications that require selective ion transport, such as fuel cells, water purification, and electrolysis devices. Studies of structure–morphology–property relationships of ion‐exchange membranes revealed that block copolymers exhibit improved ion conductivity and mechanical properties due to their microphase‐separated morphologies with well‐defined ionic domains. While most studies focused on symmetric diblock or triblock copolymers, here, the first example of a midblock quaternized pentablock AEM is presented. A symmetric ABCBA pentablock copolymer was functionalized to obtain a midblock brominated polymer. Solution cast films were then quaternized to obtain AEMs with resulting ion exchange capacities (IEC) ranging from 0.4 to 0.9 mmol/g. Despite the relatively low IEC, the polymers were highly conductive (up to 60 mS/cm Br^? at 90 °C and 95%RH) with low water absorption (<25 wt %) and maintained adequate mechanical properties in both dry and hydrated conditions. X‐ray scattering and transmission electron microscopy (TEM) revealed formation of cylindrical non‐ionic domains in a connected ionic phase. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 612–622     

Statistical copolymers of N‐vinylpyrrolidone and 2‐(dimethylamino)ethyl methacrylate via RAFT: Monomer reactivity ratios,thermal properties,and kinetics of thermal decomposition

Statistical copolymers of N‐vinylpyrrolidone (NVP) with 2‐(dimethylamino)ethyl methacrylate (DMAEMA) were prepared by Reversible Addition‐Fragmentation chain Transfer Polymerization (RAFT), employing three different RAFT agents: [(O‐ethylxanthyl)methyl]benzene, [1‐(O‐ethylxanthyl)ethyl]benzene, and O‐ethyl S‐(phthalimidylmethyl) xanthate. The reactivity ratios were estimated using the Fineman‐Ross, inverted Fineman‐Ross, Kelen‐Tüdos, and extended Kelen‐Tüdos graphical methods, along with the computer program COPOINT. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the mean sequence length. All the methods indicate that the DMAEMA reactivity ratio is much greater than the one of NVP, thus, the statistical copolymers are in fact pseudo‐diblocks. The glass‐transition temperature (T_g) values of the copolymers were measured by Differential Scanning Calorimetry. Furthermore, a systematic and detailed investigation has been done, on the thermal degradation of the copolymers compared with the respective homopolymers, by Thermogravimetric Analysis, within the framework of the Ozawa‐Flynn‐Wall and Kissinger methodologies. Apparently, the thermal stability of the copolymers is influenced by both monomers and by the structure of the thiocarbonylthio end groups due to the RAFT agents. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3776–3787