Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Synthesis and rheological properties of polylactide/poly(ethylene glycol) multiblock copolymers

Ring-opening polymerization of D,L-lactide was carried out in the presence of poly(ethylene glycol), using Zn powder as catalyst. The hydroxyl-capped PLA-PEG-PLA triblock copolymers were coupled with adipoyl chloride at different molar ratios under mild conditions. N-Dimethylaminopyridine (DMAP) was used as catalyst of the coupling reaction. The resulting PLA/PEG multiblock copolymers were characterized by various analytical techniques such as IR, 1H NMR, SEC, and DSC. Sol-gel transition properties of the multiblock copolymers were investigated by mechanical rheology. The data showed that the sol-gel transition temperature and the transition modulus increased with increasing molecular weight and the solution concentration of the multiblock copolymers. [Graph: see text] Variation of storage modulus (G') and loss modulus (G') as a function of temperature for a 20% sample of MB3.     

Preparation of interpenetrating polymer network composed of poly(ethylene glycol) and poly(acrylamide) hydrogels as a support of enzyme immobilization

Poly(ethylene glycol)(PEG)‐based interpenetrating polymeric network (IPN) hydrogels were prepared for the application of enzyme immobilization. Poly(acrylamide)(PAAm) was chosen as the other network of IPN hydrogel and different concentration of PAAm networks were incorporated inside the PEG hydrogel to improve the mechanical strength and provide functional groups that covalently bind the enzyme. Formation of IPN hydrogels was confirmed by observing the weight per cent gain of hydrogel after incorporation of PAAm network and by attenuated total reflectance/Fourier transform infrared (ATR/FTIR) analysis. Synthesis of IPN hydrogels with higher PAAm content produced more crosslinked hydrogels with lower water content (WC), smaller M_c and mesh size, which resulted in enhanced mechanical properties compared to the PEG hydrogel. The IPN hydrogels exhibited tensile strength between 0.2 and 1.2 MPa while retaining high levels of hydration (70–81% water). For enzyme immobilization, glucose oxidase (GOX) was immobilized to PEG and IPN hydrogel beads. Enzyme activity studies revealed that although all the hydrogels initially had similar enzymatic activity, enzyme‐immobilizing PEG hydrogels lost most of the enzymatic activity within 2 days due to enzyme leaching while IPN hydrogels maintained a maximum 80% of the initial enzymatic activity over a week due to the covalent linkage between the enzyme and amine groups of PAAm. Copyright © 2008 John Wiley & Sons, Ltd.     

Injectable poly(ethylene glycol) hydrogels for sustained doxorubicin release

Water‐soluble poly(ethylene glycol) derivatives with multiple “clickable” mercapto groups or double bonds were facilely synthesized in a large scale by direct polycondensation of oligo(ethylene glycol) diol with mercaptosuccinic acid or maleic acid catalyzed by scandium trifluoromethanesulfonate under mild conditions. Injectable hydrogels containing doxorubicin hydrochloride (DOX · HCl) could be rapidly formed using these poly(ethylene glycol) derivatives as precursors via in situ thiol‐ene “click” reaction under physiological conditions without light, initiator, or metal catalyst. DOX · HCl could be sustained released from the hydrogels as a result of the hindrance of the three dimensional hydrogel network on the drug molecules, which makes this kind of DOX‐loaded hydrogels a promising candidate for localized tumor chemotherapy. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermal,morphological, mechanical and aging properties of polylactide blends with poly(ether urethane) based on chain-extension reaction of poly(ethylene glycol) using diisocyanate

Poly(ether urethane)s(PEU), including PEUI15 and PEUH15, were prepared through chain-extension reaction of poly(ethylene glycol)(PEG-1500) using diisocyanate as a chain extender, including isophorone diisocyanate(IPDI) and hexamethylene diisocyanate(HDI). These PEUs were used to toughen polylactide(PLA) by physical and reactive blending.Thermal, morphological, mechanical and aging properties of the blends were investigated in detail. These PEUs were partially compatible with PLA. The elongation at break of the reactive blends in the presence of triphenyl phosphate(TPP)for PLA with PEUH15 or PEUI15 was much higher than that of the physical blends. The aging test was carried out at-20 °C for 50 h in order to accelerate the crystallization of PEUs. The PEUs in the PLA/PEU blends produced crystallization and formed new phase separation with PLA, resulting in the declined toughness of blends. Fortunately, under the aging condition,although PEUH15 in blends could also form crystallization, the reactive blend of PLA/PEUH15/TPP(80/20/2) had higher toughness than the other blends. The elongation at break of PLA/PEUH15/TPP(80/20/2) dropped to 287% for the aging blend from 350% for the original blend. The tensile strength and modulus of PLA/PEUH15/TPP blend did not change obviously because of the crystallization of PEUH15.     

Surface fixation of poly(ethylene glycol)via photodimerization of cinnamate group

This article reports a new fixation method for hydrophilic layers on substrates. The method is based on the photochemistry of the cinnamate group, which is capable of intermolecular dimerization upon ultraviolet (UV) light irradiation. The method used was as follows. First, two photoreactive polymers were sequentially coated on a polymeric surface: a polycinnamate as an adhesive layer and a cinnamated poly(ethylene glycol) (PEG) as a hydrophilic layer. Subsequently the surface was exposed to UV light. No delamination occurred upon washing with water and methanol; the photoreactive PEG was chemically bonded onto the surface via the polycinnamate. The higher the molecular weight of PEG, the higher the wettability of the surface was formed. Minimal cell adhesion was observed on such a surface. The biomedical applications of the method are discussed. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(ethylene glycol)‐based thermo‐responsive polyurethane hydrogels for controlled drug release

The thermo‐responsiveness, swelling and mechanical properties of a series of novel poly(ester‐ether urethane) hydrogels have been investigated. These thermo‐sensitive hydrogels were obtained by combining hydrophobic biodegradable poly(ε‐caprolactone) diols and hydrophilic two‐, three‐ and four‐arm hydroxyl terminated poly(ethylene glycol) (PEG) of various molecular weights, using hexamethylene diisocyanate, dichloroethane as solvent and a tin‐based catalyst. The use of multifunctional PEGs leads to the formation of covalent crosslinking points allowing an additional control of the swelling capability. Thus, it was found that tuning the hydrophilic/hydrophobic balance and the crosslinking degree by changing the composition, the swelling and the thermo‐responsive behavior of these hydrogels could be modulated. The obtained hydrogels showed a volume transition at around room temperature. Therefore, and taking into account their biocompatibility, these hydrogels show promising properties for biomedical applications, such as drug delivery. Thus, the loading and release of diltiazem hydrochloride, an antihypertensive drug used as model, were investigated. These new PEG polyurethane hydrogels were able to incorporate a high amount of drug providing a sustained release after an initial burst effect. Copyright © 2013 John Wiley & Sons, Ltd.     

Gelation characteristics and applications of poly(ethylene glycol) end capped with hydrophobic biodegradable dipeptides

Poly(ethylene glycol) (PEG) end capped with biodegradable hydrophobic dipeptides shows versatile gelation behavior in a wide range of aqueous and organic solvents. This gelation characteristic is attributed to the aggregation of polymer chains induced by dipeptide end groups. Both PEG molecular weight and molecular structure of end groups control this aggregation by striking a balance between two opposing molecular interactions: solubility of the PEG segment which tends to dissolve the polymer while hydrophobic and intermolecular noncovalent interactions between the end groups induce aggregation. Morphologically, this aggregated structure forms interpenetrating nano sheets with characteristic microstructural features. These gels are biodegradable and possess physicomechanical characteristics suitable for biomedical applications. Furthermore, proteins and hydrophobic model drugs can be encapsulated within the gels from aqueous and organic solvents, respectively, and can be released in a controlled fashion which indicates the applicability of the gels as drug delivery vehicles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1917–1928     

Fabrication of poly(ethylene glycol)‐based hydrogels entrapping enzyme‐immobilized silica nanoparticles

In this study, we immobilized enzymes by combining covalent surface immobilization and hydrogel entrapment. A model enzyme, glucose oxidase (GOX), was first covalently immobilized on the surface of silica nanoparticles (SNPs) via 3‐aminopropyltriethoxysilane (APTES), and the resultant SNP‐immobilized enzyme was physically entrapped within photopolymerized hydrogels prepared from two different molecular weights (MWs) (575 and 8000 Da) of poly(ethylene glycol)(PEG). The hydrogel entrapment resulted in a decrease in reaction rate and an increase in apparent K_m of SNP‐immobilized GOX, but these negative effects could be minimized by using hydrogel with a higher MW PEG, which provides higher water content and larger mesh size. The catalytic rate of the PEG 8000 hydrogel was about ten times faster than that of the PEG 575 hydrogel because of enhanced mass transfer. Long‐term stability test demonstrated that SNP‐immobilized GOX entrapped within hydrogel maintained more than 60% of its initial activity after a week, whereas non‐entrapped SNP‐immobilized GOX and entrapped GOX without SNP immobilization maintained less than 20% of their initial activity. Incorporation of SNPs into hydrogel enhanced the mechanical strength of the hydrogel six‐fold relative to bare hydrogels. Finally, a hydrogel microarray entrapping SNP‐immobilized GOX was fabricated using photolithography and successfully used for quantitative glucose detection. Copyright © 2009 John Wiley & Sons, Ltd.     

紫外光交联可降解聚对二氧环己酮/聚乙二醇薄膜制备与表征

以2,2-二甲氧基-2-苯基苯乙酮(DMPA)为引发剂,将四臂端丙烯酸酯聚对二氧环己酮(PPDO-4AC)和聚乙二醇双丙烯酸酯(PEG-DA)经紫外光照射制得PPDO/PEG交联薄膜.研究了光照时间和DMPA用量对PPDO/PEG交联薄膜凝胶含量的影响.DSC研究表明共聚物中两组分的相容性较好,Tg随着共聚物中PEG链...     

Associative diblock copolymers of poly(ethylene glycol) and coiled-coil peptides

A series of peptides of general primary structure (VSSLESK)_n (n = 2, 3, 4, 5 and 6) were designed and synthesized by fluorenylmethyloxycarbonyl solid-phase synthesis using a convergent approach. Peptides containing 21, 28, 35 and 42 residues were modified with α-methoxy poly(ethylene glycol) (mPEG; mol. wt. 2000) by reaction of mPEG–succinimidyl carbonate with the α-amino group of the resin-attached protected peptides. The conformation and thermal stability of the peptides and of their AB block copolymers (A is the mPEG block, B the (VSSLESK)_n block) in aqueous medium were investigated by circular dichroism, size-exclusion chromatography and by analytical ultracentrifugation. The helicity of peptides increased with increasing length in a cooperative manner. The peptides and mPEG–peptides with 35 and 42 amino acid residues (block copolymers) adopted a two-stranded α-helical coiled-coil conformation in aqueous solution. The presence of the polymer chain in the diblock hybrid copolymers had no disturbing effect with respect to the stability of the α-helical peptide part in these constructs. Moreover, the thermal stability of mPEG-modified 42-peptide was substantially higher than that of the native 42-peptide. Analytical ultracentrifugation data revealed that in phosphate-buffered saline solution (25–200 μM ) the block copolymer mPEG-block-(VSSLESK)₆ ( PEG42 ) associated into stable intermolecular coiled-coil dimers.

Thermal melting profiles of peptides and mPEG–peptides at concentration 0.4 g · L⁻¹ in PBS. Molar ellipticity at 222 nm versus temperature. Heating rate 0.5 °C · min⁻¹.     

The behavior of poly(amino acids) containing l‐cysteine and their block copolymers with poly(ethylene glycol) on gold surfaces

Poly(ethylene glycol) (PEG) is often used to biocompatibilize surfaces of implantable biomedical devices. Here, block copolymers consisting of PEG and l ‐cysteine‐containing poly(amino acid)s (PAA's) were synthesized as polymeric multianchor systems for the covalent attachment to gold surfaces or surfaces decorated with gold nanoparticles. Amino‐terminated PEG was used as macroinitiator in the ring‐opening polymerization, (ROP), of respective amino acid N‐carboxyanhydrides (NCA's) of l ‐cysteine (l ‐Cys), l ‐glutamate (l ‐Glu), and l ‐lysine (l ‐Lys). The resulting block copolymers formed either diblock copolymers, PEG‐b‐p(l ‐Glu_x‐co‐l ‐Cys_y) or triblock copolymers, PEG‐b‐p(l ‐Glu)_x‐b‐p(l ‐Cys)_y. The monomer feed ratio matches the actual copolymer composition, which, together with high yields and a low polydispersity, indicates that the NCA ROP follows a living mechanism. The l ‐Cys repeat units act as anchors to the gold surface or the gold nanoparticles and the l ‐Glu repeat units act as spacers for the reactive l ‐Cys units. Surface analysis by atomic force microscopy revealed that all block copolymers formed homogenous and pin‐hole free surface coatings and the phase separation of mutually immiscible PEG and PAA blocks was observed. A different concept for the biocompatibilization of surfaces was followed when thiol‐terminated p(l ‐Lys) homopolymer was first grafted to the surface and then covalently decorated with HOOC‐CH₂‐PEG‐b‐p(Bz‐l ‐Glu) polymeric micelles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 248–257     

Regioselective grafting of poly(ethylene glycol) onto chitosan and the properties of the resulting copolymers

PEG was grafted onto chitosan regioselectively at the hydroxyl groups with phthaloylchitosan as an intermediate. After the graft reaction, the phthaloyl groups were deprotected to give chitosan-g-PEG copolymers with free amino groups. The chemical structure of the graft copolymers was confirmed by FT-IR, (1)H and (13)C NMR spectroscopy. The resulting graft copolymers showed improved thermal stability compared to the original chitosan, and showed a lower thermal transition temperature at around 185 degrees C. Chitosan-g-PEG exhibited a high affinity not only for aqueous acid but also for some organic solvents because of the presence of abundant free amino groups and PEG branches, and it exhibited higher hygroscopicity and moisture retention ability than chitosan. [structure: see text]     

Synthesis and characterization of poly(ethylene glycol) methyl ether endcapped poly(ethylene terephthalate)

Linear and branched poly(ethylene terephthalate) (PET) copolymers with polyethylene glycol) (PEG) methyl ether (700 or 2000 g/mol) end groups were synthesized using conventional melt polymerization. DSC analysis demonstrated that low levels of PEG end groups accelerated PET crystallization. The incorporated PEG end groups also decreased the crystallization temperature of PET dramatically, and copolymers with a high content of PEG (>17.6 wt%) were able to crystallize at room temperature. Rheological analysis demonstrated that the presence of PEG end groups effectively decreased the melt viscosities and facilitated melt processing. XPS and ATR-FTIR revealed that the PEG end groups tended to aggregate on the surface, and the surface of compression molded films containing 34.0 wt% PEG were PEG rich (85 wt% PEG). PEG end-capped PET (34.0 wt% PEG) and PET films were immersed into a fibrinogen solution (0.7 mg/mL BSA) for 72 h to investigate the propensity for protein adhesion. XPS demonstrated that the concentration of nitrogen (1.05%) on the surface of PEG endcapped PET film was statistically lower than PET (7.67%). SEM analysis was consistent with XPS results, and revealed the presence of adsorbed protein on the surface of PET films.     

New architectures of poly(ethylene glycol) and poly(methylthiirane) in block copolymers

Two synthetic ways were experimented to prepare new architectures of block copolymers made of poly(ethylene glycol) (PEG) and poly(methylthiirane). The coupling of both blocks conveniently end-capped as well as anionic polymerization of methylthiirane initiated by PEG-thiols gave readily the copolymers. Their characterization by ¹H NMR, SEC and IR confirmed the expected structures.     

Novel synthesis of biodegradable star poly(ethylene glycol)‐block‐poly(lactide) copolymers

Biodegradable star‐shaped poly(ethylene glycol)‐block‐poly(lactide) copolymers were synthesized by ring‐opening polymerization of lactide, using star poly(ethylene glycol) as an initiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature. Two series of three‐ and four‐armed PEG‐PLA copolymers were synthesized and characterized by gel permeation chromatography (GPC) as well as ¹H and ¹³C NMR spectroscopy. The polymerization under the used conditions is very fast, yielding copolymers of controlled molecular weight and tailored molecular architecture. The chemical structure of the copolymers investigated by ¹H and ¹³C NMR indicates the formation of block copolymers. The monomodal profile of molecular weight distribution by GPC provided further evidence of controlled and defined star‐shaped copolymers as well as the absence of cyclic oligomeric species. The effects of copolymer composition and lactide stereochemistry on the physical properties were investigated by GPC and differential scanning calorimetry. For the same PLA chain length, the materials obtained in the case of linear copolymers are more viscous, whereas in the case of star copolymer, solid materials are obtained with reduction in their T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3966–3974, 2007     

光固化聚乙二醇水凝胶及其固定化枯草杆菌的研究

制备了一系列光固化聚乙二醇水凝胶固定化载体，研究了该水凝胶的结构、性能及其固定化枯草杆菌发酵产出α－淀粉酶的特性。结果表明，用水凝胶作载体制备的固定化枯草杆菌具有强度高、对温度和酸碱度变化的适应性强、贮存及重复使用性能好等优点。而且其产出α－淀粉酶的活力比相应的游离细胞高出２０％　以上。固定化细胞半连续发酵１７批，历时３７天，产酶活力仅下降２０％。基本能达到实际应用的要求。     

Water-soluble dendrimer–poly(ethylene glycol) starlike conjugates as potential drug carriers

The design and synthesis of a new dendrimer–poly(ethylene glycol) (PEG) conjugate that may be used as a model drug carrier are described. The starting material is a polyether dendrimer with two different types of chain end functionalities. The dendritic assembly is made water soluble through attachment of short PEG chains to the dendrimer via one type of functionality. The remaining chain end functionalities then were used to incorporate model drug molecules of varying polarity into the modified dendrimer. Cholesterol and two amino acid derivatives were selected as model drugs for attachment through their respective hydroxyl, carboxylic acid, and amino functional groups to the dendrimer via carbonate, ester, and carbamate linkages. The resulting water-soluble dendrimer-model drug conjugates were characterized by matrix-assisted laser desorption ionization time of flight (MALDI-TOF) mass spectrometry. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3492–3503, 1999     

Soft nanoparticles assembled from linear poly(ethylene glycol) and linear brush polydimethylsiloxane diblock copolymers

A series of novel amphiphilic diblock copolymers composed of hydrophilic linear poly(ethylene glycol) (PEG) and linear brush hydrophobic polydimethylsiloxane (PDMS) were synthesized. Three different molecular weights of monomethyl ether PEG were initially functionalized with 2‐bromoisobutyryl bromide to afford macroinitiators suitable for atom‐transfer radical polymerization. The macroinitiators were characterized by gel permeation chromatography, ¹H and ¹³C nuclear magnetic resonance spectroscopic analysis and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy. The three different molecular weight macroinitiators were then chain extended with monomethacryloxypropyl‐terminated PDMS and photoactive 2‐(methylacyloyloxy)ethyl anthracene‐9‐carboxylate in different molar ratios to afford a series of photoresponsive amphiphilic diblock copolymers with high conversions. Self‐assembly of these linear–linear brush diblock copolymers in N,N‐dimethylformamide afforded nanoparticles with hydrodynamic diameters (d_H) ranging from 41 to 268 nm, as determined by dynamic light scattering analysis. Crosslinking and stabilization of the nanoparticles was achieved via [4+4] photodimerization of the anthracene moieties upon exposure to UV radiation at 365 nm with the reverse reaction studied at a wavelength of 254 nm. Transmission electron microscopy revealed that the self‐assembled nanoparticles and their crosslinked derivatives had spherical morphologies. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1251–1262     

Synthesis and characterization of novel biodegradable unsaturated poly(ester amide)/poly(ethylene glycol) diacrylate hydrogels

A series of novel biodegradable hydrogels were designed and synthesized from four types of unsaturated poly(ester amide) (UPEA) and poly(ethylene glycol) diacrylate (PEG‐DA) precursors by UV photocrosslinking. These newly synthesized biodegradable UPEA/PEG‐DA hydrogels were characterized by their gel fraction (G_f), equilibrium swelling ratio (Q_eq), compressive modulus, and interior morphology. The effect of the precursor feed ratio (UPEAs to PEG‐DA) on the properties of the hydrogels was also studied. The incorporation of UPEA polymers into the PEG‐DA hydrogels increased their hydrophobicity, crosslinking density (denser network), and mechanical strength (higher compressive modulus) but reduced Q_eq. When different types of UPEA precursors were coupled with PEG‐DA at the same feed ratio (20 wt %), the resulting hydrogels had similar Q_eq values and porous three‐dimensional interior morphologies but different G_f and compressive modulus values. These differences in the hydrogel properties were correlated to the chemical structures of the UPEA precursors; that is, the different locations of the >C?C< double bonds in individual UPEA segments resulted in their different reactivities toward PEG‐DA to form hydrogels. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3932–3944, 2005