Models for adhesion at weak polymer interfaces

The weak interfaces between immiscible polymer pairs typically fail through chain scission. The critical facture toughness for such interfaces is closely related to the density of intermolecular entanglements at the interface. From scaling analysis, a simple correlation between facture toughness and chain entanglement was developed. It predicts well the interfacial adhesion for many immiscible polymer pairs found in the literature. For an interface with block copolymer reinforcement, its critical fracture toughness comes from both intermolecular entanglements of homopolymers and copolymer bridges. In the chain scission regime (low copolymer coverage), the block copolymer contribution is found proportional to copolymer interfacial coverage, with the coefficient being the energy to stretch and break a copolymer chain. The chain‐breaking energy for different copolymers was evaluated and compared to literature data. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2313–2319, 2009     

Headgroup effect on silane structures at buried polymer/silane and polymer/polymer interfaces and their relations to adhesion

Sum frequency generation (SFG) vibrational spectroscopy was used to study the effect of silane headgroups on the molecular interactions that occur between poly(ethylene terephthalate) (PET) and various epoxy silanes at the PET/silane and PET/silicone interfaces. Three different silanes were investigated: (3-glycidoxypropyl) trimethoxysilane (γ-GPS), (3-glycidoxypropyl) methyl-dimethoxysilane (γ-GPMS), and (3-glycidoxypropyl) dimethyl-methoxysilane (γ-GPDMS). These silanes share the same backbone and epoxy end group but have different headgroups. SFG was used to examine the interfaces between PET and each of these silanes, as well as silanes mixed with methylvinylsiloxanol (MVS). We also examined the interfaces between PET and uncured or cured silicone with silanes or silane-MVS mixtures. Silanes with different headgroups were found to exhibit a variety of methoxy group interfacial segregation and ordering behaviors at various interfaces. The effect of MVS was also dependent upon silane headgroup choice, and the interfacial molecular structures of silane methoxy headgroups were found to differ at PET/silane and PET/silicone interfaces. Epoxy silanes have been widely used as adhesion promoters for polymer adhesives; therefore, the molecular structures probed using SFG were correlated to adhesion testing results to understand the molecular mechanisms of silicone-polymer adhesion. Our results demonstrated that silane methoxy headgroups play important roles in adhesion at the PET/silicone interfaces. The presence of MVS can change interfacial methoxy segregation and ordering, leading to different adhesion strengths.     

Globular proteins at solid/liquid interfaces

Seven years have passed since one of us (W.N.) published the last comprehensive review on the mechanism of globular protein adsorption to solid/water interfaces. Since that time, annual contributions to the field have steadily increased and substantial progress has been made in a number of important areas. This review takes a fresh look at the driving force for protein adsorption by combining recent advances with key results from the past. The analysis indicates that four effects, namely structural rearrangements in the protein molecule, dehydration of (parts of) the sorbent surface, redistribution of charged groups in the interfacial layer, and protein surface polarity usually make the primary contributions to the overall adsorption behavior.     

Relating fracture energy to entanglements at partially miscible polymer interfaces

A new model has been developed to calculate the areal chain density of entanglements (Σ_eff) at partially miscible polymer–polymer interfaces. The model for Σ_eff is based on a stochastic approach that considers the miscibility of the system. The values agree between Σ_eff calculated from the model and literature values for the reinforced interfaces. Using Σ_eff calculated from the model, the interfacial width, and the average distance between entanglements, an equation for the fracture energy of nonreinforced polymer interfaces is proposed. This equation is used to model the transition from chain pullout to crazing. As a function of system miscibility, the model for Σ_eff also accurately predicts a maximum in mode I fracture energy (G_c) as a result of the transition from gradient‐driven to miscibility‐limited interdiffusion, which is observed experimentally. As Σ_eff increases, the fracture energy increases accordingly. Compared with a recent model developed by Brown, the new model correctly predicts a reduced G_c (attributed to chain pullout) when the interfacial width is less than the average distance between entanglements. Theoretical predictions of the change in fracture energy with respect to interfacial width agree with the experimental measurements. Finally, it is postulated that the use of a miscibility criterion for G_c may reveal the universal nature of the pullout to crazing transition. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2292–2302, 2002     

Graft and block copolymers with polysiloxane and vinyl polymer segments

A convenient new process to make silicone/organic block and graft copolymers has been recently demonstrated. This dual copolymerization process combines conventional condensation polymerization of the siloxane segments with free radical polymerization of the organic vinyl polymer segments. The copolymerization process is relatively simple and economical compared with other copolymerization techniques as it uses commonly available starting materials and available process equipment. Silicone segments containing alkene side chains or end-groups are prepared in the usual way by polycondensation using an acid or base catalyst. The double bonds of the alkene groups are oxidized to carbonyls which are then used to initiate vinyl monomer polymerization and link the siloxane with the vinyl segments. This initiation step is based on a redox system of copper^(II) salts which generates free radicals on the alpha carbons next to the carbonyl groups. This copolymerization process is relatively fast and proceeds at high yields.     

水-油界面上聚合物单链的动态性质及疏水相互作用

通过荧光关联光谱研究了不相容的水-油界面上聚乙二醇单链的横向扩散运动,系统地研究了PEO单链的扩散运动速率随着水溶液中电解质NaCl浓度的升高的变化规律,发现随着盐浓度的升高,扩散系数的变化主要取决于油相的黏度,说明NaCl浓度的升高增强了聚合物链与烷烃油相的疏水相互作用.     

Probing polymer/polymer interfaces

Infrared-visible sum frequency generation spectroscopy (SFG) has been used to study the interface between poly(vinyl-N-octadecylcarbamate-co-vinyl acetate) (Comb) and deuterated or hydrogenated polystyrene (dPS or hPS) films. Strong methyl symmetric and Fermi resonance bands associated with the alkyl side chains of the Comb polymer are observed in the SFG spectra. In addition, for Comb/hPS spectra, symmetric and asymmetric vibration modes of phenyl groups are observed. The presence of asymmetric modes indicates the phenyl rings are tilted with respect to the interface normal.     

Molecular weight dependence of diblock copolymer segregation at a polymer/polymer interface

Utilizing forward recoil spectrometry (FRES), we have determined the segregation isotherm which describes the interfacial excess z_i^* of diblock copolymers of poly (d₈-styrene-b-2-vinylpyridine) (dPS-PVP) at the interface between the homopolymers PS and PVP as a function of ?_∞, the volume fraction of diblock copolymer remaining in the host homopolymer. All the samples were analyzed after annealing at temperatures and times sufficient to achieve equilibrium segregation. The effect of the degree of polymerization of both the diblock copolymers and the host homopolymers on the segregation isotherm is investigated. When the degree of polymerization of the homopolymer is much larger than that of the diblock copolymer, the normalized interfacial excess (z_i^*/R_g), where R_g is the radius of gyration of an isolated block copolymer chain, is a universal function of that portion of the block copolymer chemical potential due to chain stretching. The existence of such a universal function is predicted by theory and its form is in good agreement with self-consistent mean field calculations. Using these results, one can predict important aspects of the block copolymer segregation (e.g., the saturation interfacial excess) without recourse to the time-consuming numerical calculations. © 1994 John Wiley & Sons, Inc.     

Deformation and adhesive contact of elastomeric membranes

We have developed a highly sensitive inflation technique for probing adhesive interactions between soft materials. In this method, an elastomeric membrane is placed across a cylindrical glass tube and is pressurized into contact with a substrate. The adhesive interaction between the membrane and the substrate is obtained from the angle of contact, which is determined indirectly from the measured contact radius and applied pressure. An analysis of the membrane profile based on the numerical solution of the axisymmetric Laplace equation is developed. In a nonadhesive situation, where the membrane contact angle is known to be zero, the analysis is used to obtain the relationship between the membrane deformation and the biaxial membrane strain. Linearization of the governing equations is used to develop an analytic solution for the contact angle and energy release rate, making a connection to existing, more restrictive analyses of this problem. Results from three different types of membranes are presented as illustrative applications of the method. The substrate in these experiments is the gold electrode surface of a quartz crystal resonator, and the effect of membrane contact on the crystal resonance is summarized briefly. Adhesive interactions between the membranes are minimized in most cases by adding a grafted polyethylene glycol brush to one or both of the contacting surfaces. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3361–3374, 2007     

Structured multistimuli‐responsive functional polymer surfaces obtained by interfacial diffusion of amphiphilic block copolymers

Herein, we report the preparation of structured multistimuli‐responsive surfaces able to change reversibly both their chemical composition depending on the environment and their surface behavior by varying either/both the pH or/and the temperature. For that purpose, we took advantage of the surface segregation in homopolymer/diblock copolymer blends, composed of either polystyrene‐block‐poly(N,N′‐dimethylaminoethylmethacrylate) (PS‐b‐PDMAEMA) or polystyrene‐block‐poly (N,N′‐diethylaminoethylmethacrylate) (PS‐b‐PDEAEMA) and high molecular weight polystyrene used as a matrix. The variations of the surface composition as a function of the environment of exposure (air or water vapor) was investigated were investigated by XPS and contact angle measurements. The water‐annealed surfaces contain PDMAEMA or PDEAEMA at the surface and are additionally able to respond both to pH and temperature as demonstrated by the Wilhelmy technique. Both PDMAEMA and PDEAEMA can switch from a hydrophilic state to a collapsed hydrophobic state increasing the temperature above the LCST. More interestingly, as a result of the microphase separation of the block copolymers at the interface, the surfaces of the blends exhibit structuration. Thus, either micellar structures or “donut‐like” morphologies were obtained by using THF or toluene, respectively, as solvent. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1952–1961, 2010     

Surface-induced shift of melting/freezing temperatures at interfaces between two semi-infinite media

Many physical properties and the structure of liquids at interfaces differ from those of the same liquids in the bulk state. In particular, the freezing temperatures of numerous liquid systems at interfaces between two fluids can be either increased or decreased compared to the temperature of corresponding bulk phase transition. The approach proposed in this paper allows one to predict the surface-induced shift of the melting/freezing temperatures in various systems. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 14–18, January, 2007.     

Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998     

Relation between the adhesion strength and interfacial width for symmetric polystyrene bilayers

Polystyrene (PS) bilayers were prepared and were adhered at a temperature between the surface and bulk glass-transition temperatures for a given time. Then, the interfacial adhesion strength (G_L) was examined with a conventional lap-shear measurement. G_L first increased with increasing adhesion time and then reached a constant value. This result implied that the segments moved across the interface, to a certain depth, even at a temperature below the bulk glass-transition temperature. To confirm this, the interfacial evolution for the PS/deuterated PS bilayers was examined with dynamic secondary-ion mass spectrometry. The G_L value was linearly proportional to the thickness of the interfacial adhesion layer. Finally, we propose a strategy for regulating the adhesion strength based on the chain-end chemistry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3598–3604, 2006     

Small solid particles and liquid lenses at fluid/fluid interfaces

The behaviour of small solid particles and liquid droplets at fluid interfaces is of wide interest, in part because of the roles they play in the stability of foams and emulsions. Here we focus on solid particles at liquid interfaces, both singly and in highly structured monolayers. We briefly mention small oil lenses on water in connection with the determination of line tension, τ. Particles are surface-active in the sense that they often adhere quite strongly to liquid surfaces, although of course they are not usually amphiphilic. The three-phase contact line around a particle at an interface is associated with an excess free energy resulting in a tendency of the line to contract (positive τ, which is a 1D analogue of surface tension) or to expand (negative τ). Positive line tension acts so as to push the contact angle of a particle with the fluid interface further away from 90°, i.e. to force the particle towards the more “wetting” of the two bulk phases. It also leads to activation barriers to entry and departure of particles from an interface. The behaviour of particle monolayers at octane/water interfaces is also discussed . It is found that, for monodisperse spherical polystyrene particles containing ionisable sulphate groups at the surface, highly ordered monolayers are formed. This appears to result from very long range electrostatic repulsion mediated through the oil phase. Surface pressure–surface area isotherms are discussed for particle monolayers and it is shown, using light microscopy, that at monolayer “collapse” particles are not expelled from the monolayers but rather the monolayer folds, remaining intact. This has an important bearing on methods, involving the use of the Langmuir trough, for the experimental determination of contact angles and line tensions in particulate systems. Received: 18 July 1999/Accepted: 30 August 1999     

Experimental aspects of polymer adsorption at solid/solution interfaces

Several recent review articles have been concerned with the topic of polymers at interfaces from the theoretical standpoint. This reflects the extensive effort made in this area over the last 10 – 15 years. However, new experimental techniques for studying polymers at interfaces have also begun to appear in recent years; so have better defined model systems. This article is therefore directed more to a survey of these experimental aspects of the subject. However, a short review of the current state of the theory is given first as background and to define concepts. In the following chapter, details of the modern experimental methods are given. The last chapter comprises an extensive comparative review of results obtained using these techniques with model systems, covering homopolymers, copolymers and polyelectrolytes.