NMR and x-ray studies on the morphology of thermoreversible polyacrylonitrile gels

The morphology of thermoreversible polyacrylonitrile–propylene carbonate (PAN-PC) gels was examined using solid-state carbon-13 nuclear magnetic resonance (NMR) spectroscopy and x-ray diffraction. Following complete dissolution of the polymer at elevated temperature and cooling of the concentrated PAN-PC solutions, a gel was formed. The PAN-PC gels consisted of regions of mobile polymer chains, rich in PC, “cross-linked” by regions of rigid polymer. The mobile regions of the gels showed solution-type NMR spectra with resolution of tacticity effects. The rigid component detected by NMR would correspond to the crysttallites detected previously by x-ray diffraction. Wide-angle x-ray diffractograms of the gels showed different peaks when compared with the dry polymer powder. After solvent extraction and drying of the gel, the diffractogram reverted to that of the original dry powder. This new result is the strongest evidence to support the view advanced earlier that the new peaks found in the diffraction pattern of the wet gels arises from solvated polymer crystallites rather than from ordinary polymer crystallites. © 1993 John Wiley & Sons, Inc.     

Enthalpic effect of polyacrylonitrile on the concentrated solutions in dimethyl sulfoxide: Strong thixotropic behavior and formation of bound solvents

The effect of dipole–dipole interaction by nitrile groups of PAN on the bound state of solvent molecules and the concentrated solution properties in DMSO was investigated. Variation of a solution viscosity exhibited three overlap concentrations, C1*, C2*, and C3*, at 2.7, 8.6, and 16.3 wt%, respectively, representing the transition of concentration regions in the order of dilute, unentangled‐semi dilute, entangled‐semi dilute, and concentrated regions. The two‐dimensional mapping of FT‐IR analysis and dielectric measurement confirmed that the intermolecular interaction of PAN was suddenly enhanced at the C*s, inducing polarization to DMSO. In the ice‐melting process of PAN solutions, two different melting peaks (T_m2 and T_m3) of DMSO newly appeared at each C2* and C3*, suggesting the different types of bound solvents. In the concentrated solutions, the saturated dielectric constant and the strongly delayed evaporation of the solvent even at the boiling point of DMSO along with strong thixotropic behavior were indicative of the stronger confinement state of bound DMSO than in the semidilute solutions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1080–1089     

The influence of comonomers on the degradation and flammability of polyacrylonitrile: Design input for a new generation of flame retardants

A series of homo- and copolymers of acrylonitrile was prepared under radical initiation in DMF solutions. The thermal and flammability characteristics of these polymers were evaluated through thermogravimetric analyses (TGA), differential scanning calorimetry (DSC), and by limiting oxygen index (LOI) measurements. The thermal degradation behaviours of the polymers were assessed primarily with a view to designing comonomers, for acrylonitrile-based polymers, bearing flame retardant moieties. Broadly speaking, in LOI tests acrylic-based comonomers were found to improve fire performance. For instance, the incorporation of methacrylic acid gave a limiting oxygen index value of 26.4 at 30.9 mol% loading, and an intumescent char was produced upon burning.     

General analysis of the measurements of the lateral crystal lattice moduli of semicrystalline polymers by x-ray diffraction and the application to nylon 6

A mathematical representation based on a linear elastic theory is proposed by which one may investigate the dependences of molecular orientation and crystallinity on the crystal lattice moduli and linear thermal expansion coefficients in the direction perpendicular to the chain axis as commonly measured by x-ray diffraction. In the theoretical calculation, a previously introduced model was employed in which oriented crystalline phase is surrounded by oriented amorphous phase and the strains of the two phases at the boundary are identical. The mathematical analysis indicated that the lateral crystal lattice moduli and linear thermal coefficients as measured by x-ray diffraction may be different from the intrinsic crystal moduli and linear thermal coefficients of a crystal unit cell, depending on the structure of the polymer solid. The numerical calculation was applied to nylon 6. As a result, it may be confirmed that the lateral crystal lattice moduli measured by x-ray diffraction are sensitive to the morphology of the bulk speciments and close to the intrinsic crystal moduli if the morphology of the test specimen can be represented by a parallel model with respect to the original stretching longitudinal direction.     

Characterization of polyethylenes by x-ray diffraction and 13C-NMR: Temperature studies and the nature of the amorphous halo

X-ray diffraction patterns of linear and branched polyethylenes typically show two sharp reflections and an amorphous halo. The position of the halo depends on branch content and temperature. A single curve describes the position of the halo maximum (2θ_halo) for a range of liquid hydrocarbons and polyethylenes in the 20–140°C range. At temperatures well below their melting point, branched polymers give 2θ_halo values which differ significantly from those observed for the liquid Linear polymers show a greater divergence, indicating that some of the material giving rise to the halo is much better packed than in the liquid.Parallel ¹³ C NMR spin-lattice relaxation studies suggest that this relatively ordered material has a trans conformation but a low average T_1c value. © 1993 John Wiley & Sons, Inc.     

Structural transformation of ultra-high modulus and molecular weight polyethylene fibers by high-temperature wide-angle X-ray diffraction

Wide-angle x-ray diffraction (WAXD) of the ultra-high modulus and molecular weight polyethylene (UHMWPE) fibers at room temperature shows a predominantly orthorhombic structure with trace amount of nonorthorhombic crystals and very low amorphous contents. The calculated unit cell dimensions a and b of the orthorhombic crystals are 7.36 (±0.04) Å, and 4.89 (±0.04) Å, respectively. The apparent crystallite sizes perpendicular to the orthorhombic 110 and 200 reflection planes are 169.8 and 143.4 Å, respectively. The crystallite size perpendicular to the nonorthorhombic 010 reflection is 149.4 Å. The crystal density is calculated to be 1.02 g/cc. With increasing temperature, the thermal expansion coefficient in the a direction is much higher than that in the b direction which explains the structural transformation from the orthorhombic crystals to a pseudohexagonal form. Tension along the fiber axis while being heated during the high-temperature x-ray diffraction (HTWAXD) scanning has shown enhanced structural transformation from the orthorhombic form to the monoclinic form. Structural transformation from the orthorhombic form to the pseudohexagonal phase is not observed on the UHMWPE fibers under axial tension or annealing conditions in HTWAXD. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 623–630, 1997     

超临界和近临界条件下Fischer Tropsch合成研究：溶剂的影响

研究了超临界和近临界条件下费托合成过程中溶剂对反应行为的影响。反应在固定床反应器中进行，催化剂为Co/SiO2，所选择的溶剂有两类：纯溶剂（正戊烷和正己烷）和混和溶剂（由正己烷和少量的C5~10烃组成）。结果表明,正己烷分压对CO转化率影响很小，但是产物中1 烯烃含量随正己烷分压增加而增加，超临界条件下1 烯烃含量明显高于非临界条件下。溶剂的种类对CO转化率、CH4和CO2选择性以及产物炭分布影响不大。这一结果表明为了减少溶剂用量，对含有适量轻组分（C5~10）的正己烷溶剂进行循环使用是可行的。结果同时表明与正己烷相比，混和溶剂（25%正己烷和75%正葵烷）具有较高的1 烯烃选择性。     

Vesicle formation of 1:1 cationic and anionic surfactant mixtures in nonaqueous polar solvents

The vesicle formations of 1:1 cationic-anionic surfactants in various nonaqueous polar solvents and their aqueous mixtures were investigated. Outstanding vesicle-forming capability and stability of cationic and anionic surfactants were found in nonaqueous polar solvents and their aqueous mixtures except for in formamide. A small amount of formamide destroys the vesicles formed by cationic-anionic surfactants in aqueous solutions. These results could be very well explained based on the effect of the medium dielectric constant. Received: 26 May 1998 Accepted in revised form: 24 November 1998     

A new quinoxaline and isoindigo based polymer as donor material for solar cells: Role of ecofriendly processing solvents on the device efficiency and stability

A new semiconducting polymer based on two different electron deficient (quinoxaline and isoindigo) and electron rich (benzodithiophene) moieties is synthesized, characterized and used as donor material for photovoltaic devices. Blade‐coated bulk heterojunction solar cells are fabricated in air by using chlorinated (o‐dichlorobenzene) and nonchlorinated (o‐xylene) solvents for the deposition of the active layer. The use of o‐xylene allows a ～10% improvement of the device efficiency in comparison to the analogous system processed from o‐dichlorobenzene. In addition, the evolution of the photovoltaic parameters of the resulting devices during thermal stress is monitored and compared, demonstrating a nearly identical resistance against temperature. The reported results not only highlight the promising properties of the new polymer in terms of environmental stability and compatibility with nonhalogenated solvents, but also show an easy and ecofriendly way to further improve the device performance without altering the corresponding thermal stability. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 234–242     

Ethylene‐vinyl alcohol copolymers partially modified with benzoate groups: Study of their polymorphic behavior

The crystalline structure exhibited by terpolymers obtained through chemical modification with benzoyl chloride from an ethylene‐vinyl alcohol copolymer with a molar fraction in vinyl alcohol of 68%, EVOH68, has been studied by either wide angle X‐ray diffraction or small angle X ray scattering experiments and differential scanning calorimetry. The type of crystal lattice developed has been found to be strongly dependent on modification degree and thermal history. A highly‐disordered crystalline lattice with very small crystallites has been found for the quenched specimen with the highest benzoate content while the rest of fast cooled samples crystallized into an orthorhombic lattice. On the other hand, a monoclinic crystal cell has been observed in the slowly cooled specimens with low benzoate incorporation. At the last given thermal treatment, this monoclinic lattice evolves and seems to be transformed into an orthorhombic‐like crystal for the terpolymer with the highest modification ratio. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1026–1036, 2007     

The effect of water-miscible organic solvents on the substitution reaction of Keggin-type heteropolysilicates and -germanates with vanadium(V) ion

The substitution reaction of Keggin-type polyoxometalates, [XM₁₂O₄₀]ⁿ⁻ (X = Si, Ge, P, or As; M = Mo or W), with vanadium(V) ion was investigated with cyclic voltammetry, Raman spectroscopy, and ³¹P NMR. The effect of organic solvents, such as acetonitrile (ACN), tetrahydrofuran (THF), formamide (FA), N-methylformamide (NMF), and N-methylacetoamide (NMA) on their substitution reactions was examined. In aqueous and aqueous-FA, -NMF, and -NMA solutions, the molybdenum or tungsten unit in the Keggin-anions was substituted with vanadium(V) ion to form V(V)-substituted polyoxometalates, while no substitution reaction occurred in aqueous-ACN and -THF solutions. It is suggested that this results from the relationship between the total anion charge and the permittivity of organic solvents.     

The effect of polymers on the phase behavior of balanced microemulsions: diblock-copolymer and comb-polymers

The effect of some amphipilic diblock-copolymers and comb-polymers on a balanced Winsor III microemulsion system is investigated with the quaternary system n-octyl-β-d-glucoside/1-octanol/n-octane/D₂O as basis system. The diblock-copolymers are polyethyleneoxide-co-polydodecenoxide (PEO _x PEDODO _y ) and polyethyleneoxide-co-polybutyleneoxide (PEO _x PEBU _y ), constituted of a straight chain hydrophilic part and a bulky hydrophobic part. Addition of the diblock-copolymer leads to an enhancement of the swelling of the middle phase by uptake of water and oil; a maximum boosting factor of 6 was obtained for PEO₁₁₁PEDODO₂₅. Nuclear magnetic resonance diffusometry yields the self-diffusion coefficients of all the components in the system. The diffusion experiments provide information on how the microstructure of the bicontinuous microemulsion changes upon addition of the polymers. The reduced self-diffusion coefficients of water and oil are sensitive to the type of polymer that is incorporated in the film. For the diblock-copolymers, as mainly used here, the reduced self-diffusion coefficient of oil and water will respond to how the polymer bends the film. When the film bends away from water, the reduced self-diffusion of the water will increase, whereas the oil diffusion will decrease due to the film acting as a barrier, hindering free diffusion. The self-diffusion coefficient of the polymer and surfactant are similar in magnitude and both decrease slightly with increasing polymer concentration.     

A computational study of ion speciation in mixtures of protic ionic liquids with various molecular solvents: Insight into the solvent polarity and anion basicity

The ion pairing state of the ionic liquids greatly depends on the cosolvent which subsequently affects the properties and the functionalities. Density functional calculations have been performed to study the ion pairing formation process of protic ionic liquids (PILs) ([Et₃NH][CH₃SO₃]/TEAMS or [Et₃NH][CF₃SO₃]/TEATF) dissolved in different solvents. The clusters involving the cation, anion, and different number of solvent molecules have been used to simulate the contact ion pairs (CIPs) and the solvent‐separated ion pairs (SIPs) in the mixtures with varying solvent concentrations. The geometric, energetic data, and the natural bond orbital analysis suggest the smallest number of the water molecules required to break the TEAMS CIPs is four, while it is three for TEATF. This is consistent with the experimental prediction that if the mixture of TEAMS and water was replaced by TEATF and water, the transition process began at a lower water concentration. Furthermore, the calculated results also confirm that the weakly polar organic solvents favor the CIP form at all solvent concentrations, while the high polarity solvents promote dissociation of the CIP to generate the SIP form for particular PILs. The different separation nature of the given solvents can be interpreted in terms of their distinct hydrogen bond donor and acceptor abilities.     

Glass transition and melting behavior of poly(ether-ester) multiblock copolymers with poly(tetramethylene isophthalate) hard segments

The glass transition and melting behavior of poly(ether-ester) multiblock copolymers with poly(tetramethylene isophthalate) (PTMI) hard segments and poly(tetramethylene oxide) (PTMO) soft segments are studied by differential scanning calorimetry (DSC) and small- and wide-angle x-ray scattering (SAXS and WAXS). Thermodynamic melting parameters for the PTMI homopolymer are estimated by WAXS and from the dependence of melting point on crystallization temperature. The melting behavior of PTMI is characterized by dual endotherms which are qualitatively representative of the original morphology, although reorganization effects are present. The composition dependence of the glass transition temperature parameters after rapid quenching from the melt are well described by mixed phase correlations for copolymers in the range 30-100 wt% hard segment. Combined with SAXS characterization at melt temperatures, a single phase melt is suggested in these materials which extends to temperatures below the hard segment melting point. © 1994 John Wiley & Sons, Inc.     

Change of water structure by solvents and polymers Part 4: Albumin-water solutions with acetylsalicylic,hydrochloric and ascorbic acid,lysine- and ammonium chloride and with dextrane and sorbit

Viscosity measurements were made in the temperature range of 10 °–40 °C. The equation= _o exp(B/(T-T _o )) was used with the parameterT ₀ as structure indicator, which is called the limiting temperature. For instance, hydrocarbons, as liquids with quasifree molecules, haveT ₀=O; water as a highly structured liquid hasT ₀= 140–150 K.The polymer investigated was ovalbumin in aqueous solution in a concentration comparable to that of blood. Acetylsalicylic acid produces a protein conformation which breaks the water structure in solution at a pH of within the in vivo region.The question of whether only the acidity determines the water structure breaking properties of the protein is investigated by acidifying albumin-water solutions with hydrochloric acid, lysine chloride and ascorbic acid. All these acids exhibit similar effects. A stronger influence is observed for ammonium chloride. Its interaction with ovalbumin produces a strong structure-breaking effect. The most powerful water structure breaker in albumin-water solutions is dextrane. In a concentration of 10 % it changes the polymer conformation so that the water structure is broken to such an extent that the solution behaves as an almost quasifree liquid withT ₀=O.     

Syntheses and optoelectronic properties of quinoxaline polymers: The effect of donor unit

Tuning the bandgap of electrochromic polymers is one of the important research topics in electrochromism. To understand clearly the effect of donor unit in donor–acceptor–donor‐type polymers, 2,3‐bis(4‐tert‐butylphenyl)‐5,8‐di(thiophen‐2‐yl)quinoxaline and 2,3‐bis(4‐tert‐butylphenyl)‐5‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐ 5‐yl)‐8‐(thiophen‐2‐yl)quinoxaline were synthesized and polymerized potentiodynamically. Their electrochemical and spectroelectrochemical studies were performed, and the results were compared with those of poly(2,3‐bis(4‐tert‐butylphenyl)‐5,8‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)quinoxaline) (Gunbas et al., Adv Mater 2008, 20, 691–695). A blue shift in the polymer π–π* transitions revealed that the bandgap of such polymers with the same acceptor unit is related to the electron density of donor units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymerization behavior of propene with [t-BuNSiMe2Flu]TiMe2: effects of solvents and cocatalysts

The titanum complex [η¹:η³tert-butyldimethylfluorenylsilyl]-amido)dimethyltitanum ([t-BuNSiMe₂Flu]TiMe₂, Cat.A) was synthesized by an alternatively quicker one pot procedure. Polymerization of propene in the presence of [t-BuNSiMe₂Flu]TiMe₂/dried pure methylaluminoxane (d-PMAO) system at 0 °C was investigated in toluene and heptane. A strong enhancement of productivity was observed in toluene compared to heptane. Polymerization of propene was also investigated with Cat.A in heptane, with different cocatalysts, d-PMAO and dried pure modified methylaluminoxane (d-MMAO), which was prepared from the mixture of trimethylaluminum (TMA) and triisobutylaluminum (TIBA). A 10-fold higher number average molecular weight (M_n) and broad molecular weight distribution (MWD) was obtained with d-PMAO in heptane, even though kinetic features and other parameters signified the living nature of the polymerization process. However, the broadening of MWD was attributed to the poor insolubility of d-PMAO in heptane.     

The α-halogeno ether function: formation and use in the design of tailor-made polymers

α-Halogeno ether species, in appropriate conditions, can induce the “living” cationic polymerization of vinyl ethers. They can also be used as initiators for the “living” polymerization of styrene derivatives. Therefore, their use as intermediates in the preparation of tailor-made polymers and copolymers offers interesting opportunities in macromolecular synthesis. The main parameters which determine and control their reactivity are reviewed and discussed. The possibility to generate quantitatively these derivatives by various routes and from different organic functions such as aldehyde, ketone, acetal and hydroxyl is examined. Some of these routes have been used to generate the α-halogeno ether function directly at the end of acetal and hydroxy-terminated polymers. The latter have then been used as macroinitiators to prepare new block copolymers. The synthesis of poly(isobutyl vinyl ether-β-ethyl vinyl ether), poly(styrene-β-chloroethyl vinyl ether) and poly(chloroethyl vinyl ether-β-butadiene-β-chloroethyl vinyl ether) by this technique is described.     

Preparation of G-CuO NPs and G-ZnO NPs with mallow leaves,investigation of their antibacterial behavior and synthesis of bis(indolyl)methane compounds under solvent-free microwave assisted dry milling conditions using G-CuO NPs as a catalyst

In this study, biogenic copper and zinc oxide nanoparticles (G-ZnONPs and G-CuONPs) were synthesized by the green synthesis method using Malva parviflora L. (Millow) leaf extract and the obtained nanoparticles were characterized in detail with UV-Vis, FTIR, SEM, XRD. The antibacterial properties of the synthesized nanoparticles on gram-positive and gram-negative bacteria were investigated and it was found that the nanoparticles had high antimicrobial activity in the results of the experiments. With the obtained G-CuONPs, the synthesis of bis(indolyl)methanes with the “green” one-pot synthesis using microwave was achieved quickly and with high efficiency, and the thermal behavior of the obtained products was investigated.