Kinetics and mechanism of the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The kinetics of grafting a basic monomer, 2-(dimethylamino)-ethyl methacrylate (DMAEMA) to hydrocarbon substrates have been investigated. These systems were chosen as models for the grafting of a homopolymerizable monomer to polyolefins such as polyethylene. The reactions with squalane and n-eicosane were initiated by an organic peroxide, 2,5-dimethyl 2,5 dit-butylperoxy)-3-hexyne; grafting yields become significant at high reaction temperatures and low monomer concentrations. In squalane, the order of reaction with respect to monomer increased from about 1.1 for 0.22?0.44M DMAEMA to almost 2 at 0.69M DMAEMA; the order with respect to initiator was 0.56. The overall activation energy in the 130?160°C temperature range was, however, surprisingly low, 42±5 kJ mol^?1. When analytical data were used to separate the overall rate into those for grafting and homopolymerization, different kinetic paths were observed for the competing reactions. These results are interpreted in terms of two different mechanisms; intramolecular chain transfer plays an important role in grafting, while depropagation becomes a major factor in homopolymerization at temperatures above 150°C. © 1995 John Wiley & Sons, Inc.     

Kinetic studies of grafting of maleic anhydride to hydrocarbon substrates

The kinetics of grafting of maleic anhydride to various hydrocarbon substrates has been investigated. Grafting to eicosane and squalane was effected in the pure hydrocarbons and in 1,2-dichlorobenzene solution, while polyethylene was grafted only in solution. The initiator was 2,5-dimethyl-2,5-di(t-butylperoxy)-3-hexyne which has a half life of about 1 h at a typical reaction temperature of 150°C. At high concentrations of initiator (Ca. 0.02M), the rate of disappearance of maleic anhydride is linear with time. In the pure hydrocarbons the order with respect to initiator is close to 0.5. In squalane, the overall activation energy is 112 kJ mol^?1; the average number of maleic anhydride molecules grafted per molecule of peroxide decomposed varies from 8 at high rates of initiation to 57 at low rates of initiation. The results are interpreted in terms of a chain mechanism, including a slow propagation step in which a succinic anhydride radical abstracts hydrogen from the same or a different chain. The same general mechanism is proposed for grafting of maleic anhydride to polyethylene and the hydrocarbons in 1,2-dichlorobenzene solution.     

Facile synthesis of amphoteric ion exchange membrane by radiation grafting of sodium styrene sulfonate and N,N‐dimethylaminoethyl methacrylate for vanadium redox flow battery

Sodium styrene sulfonate (SSS) and N,N‐dimethylaminoethyl methacrylate (DMAEMA) are grafted into poly(vinylidene difluoride) (PVDF) film using γ‐radiation techniques. SSS could be co‐grafted successfully with DMAEMA, although it is difficult to be grafted solely into PVDF films. Through subsequent protonation process, an amphoteric ion exchange membrane (AIEM) is synthesized facilely and environmentally benignly. The degree of grafting (DOG) increases with absorbed dose and levels off at 40 kGy. Micro‐FTIR and X‐ray photoelectron spectroscopy analyses confirm the existence of the designed units and quaternization of DMAEMA units in the grafted films. The quaternization and grafting occurring at the same time makes it a unique way to synthesize quaternized AIEM in one step. Finally, an AIEM with a DOG of 43% is assembled in the vanadium redox flow battery (VRFB) system, and the VRFB maintains an open circuit voltage higher than 1.4 V after placed for 85 h, which is much longer than that with Nafion117 membrane. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5194–5202     

γ-Ray-induced grafting of DMAEMA and AAc onto PP by two step method

Binary graft copolymerization of thermosensitive 2-(dimethylamino) ethyl methacrylate (DMAEMA) and pH sensitive acrylic acid (AAc) monomers onto polypropylene (PP) films was carried out by a two step method using a ⁶⁰Co gamma radiation source. The PP film was initially modified by grafting of DMAEMA through a direct method. The DMAEMA-g-PP film obtained was then subjected to radiation grafting of AAc by the pre-irradiation method to give (DMAEMA-g-PP)-g-AAc. The optimal conditions, such as reaction time, reaction temperature, monomer concentration, and dose were studied. The grafted samples were verified by the FTIR-ATR spectroscopy and swelling; thermal properties were analyzed by DSC and TGA.     

Preparation and physical properties of novel nonionic surfactants and their grafting copolymers with linear low density polyethylene (LLDPE)

Three nonionic surfactants, S1, S2, and S3 and their acrylates, AS1, AS2, and AS3, were synthesized with poly(ethylene oxide) and diols such as glycol, 1,6‐hexanediol, and 1,10‐decanediol as the main starting materials. Their chemical structures were characterized by means of Fourier transform infrared (FTIR) spectroscopy and ¹H NMR. The surface activity and surface tension (γ) of S1, S2, and S3 were evaluated by a drop weight method. The surface tension was found to decrease with the length of the lipophilic spacer in the molecular chains (γ_S1 < γ_S2 < γ_S3). AS1, AS2, and AS3 were adopted as functionalizing monomers and grafted onto linear low density polyethylene (LLDPE) with a melt reactive extrusion procedure. The graft degrees of LLDPE were determined by FTIR. Three grafted LLDPE samples with grafting degrees of 1.16% (AS1), 0.82% (AS2), and 0.71% (AS3) were prepared. Thermal and rheological properties of grafted LLDPE samples were studied with differential scanning calorimetry and a rotational rheometer. Crystallization rates of grafted LLDPE were faster than that of plain LLDPE at a given crystallization temperature because graft chains could act as nucleating agents. The isothermal crystallization behavior of grafted LLDPE was in accordance with the Avrami model only in the first stage, and deviated from the model with an increase in the crystallization time. Shear thinning at high shear rates and shear thickening at low shear rates were observed for the grafted LLDPE. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 314–322, 2005     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

Peroxide-initiated grafting of maleic anhydride onto linear and branched hydrocarbons

The structural features of the grafting of maleic anhydride onto low-molecular-weight compounds have been elucidated using several spectroscopic and analytical techniques. Conclusive evidence for the occurrence of singly grafted anhydride residues in multiply grafted products has been established using 2,3-¹³C₂ labeled maleic anhydride. In homogeneous solution, at the low concentrations of maleic anhydride employed, there is little evidence for oligomeric or polymeric grafts to dodecane, pristane, or squalane. The results suggest that isothermal grafting of maleic anhydride to hydrocarbon polymers should also lead to a predominance of single grafts. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3817–3825, 1999     

Temperature- and pH-responsive behavior of a novel copolymer of (PP-g-DMAEMA)-g-AAc

Graft copolymers of 2-(dimethylamino)ethylmethacrylate (DMAEMA) and acrylic acid (AAc) onto polypropylene films were investigated for obtaining a pH- and thermo-sensitive material. DMAEMA and AAc were grafted by direct irradiation and pre-irradiation methods, respectively, using a ⁶⁰Co γ-source. Due to the acidic and basic nature of the monomers, this novel copolymer corresponds to the class of polyzwitterions. Their behavior was studied in presence of different buffer solutions from pH 2 to 12 for different grafting percentages (from 9 to 362%) of AAc and keeping the DMAEMA grafting percentage constant. These modified films showed the same critical pH point at 7.6 in a range of temperatures from 23 to 37 °C. The swelling percentage showed a dependence on AAc content and pH. The lower critical solution temperature was observed at 36 °C when AAc content was less than 30% of grafting. The grafted films were characterized by swelling behavior, FTIR-ATR and UV–Vis spectrometry for study of loading and release of vancomycin as a model drug at room temperature.     

Grafting copolymerization of N,N-dimethyacrylaminoethylmethacrylate (DMAEMA) onto preirradiated polypropylene films

Grafting copolymerization of dimethylaminoethylmethacrylate (DMAEMA) onto preirradiated polypropylene (PP) films was studied. PP samples were irradiated by electron beam in air. The effects of co-solvent system of ethanol/water (EtOH/H₂O), absorbed dose, monomer concentration, reaction time, and reaction temperature on the degree of grafting were determined. The grafted sample films were investigated by Fourier transform infrared (FTIR) spectroscopy in the attenuated total reflectance mode (ATR).     

二元单体在棉纤维上的γ辐射接枝

在氮气气氛下用γ射线辐照的方法在棉纤维上接枝苯乙烯/马来酸酐、苯乙烯/甲基丙烯酸二甲胺乙酯、苯乙烯/醋酸乙烯酯二元单体. 研究了溶液中单体的浓度和二元单体的摩尔比等条件对接枝率的影响, 并探讨了两种单体的竞聚率对接枝率、接枝膜的组成及性能的影响. 结果表明决定二元接枝生成物结构比例的是二元单体的比例及其竞聚率. 接枝产物的红外、热重分析进一步佐证了竞聚率对不同二元单体体系接枝生成物结构的影响. X射线衍射结果表明棉纤维素上接枝不同的二元单体后均引起结晶度的下降, 而且结晶度随接枝率的增加而降低, 证明二元接枝反应是从纤维素无定型区通过第三相向结晶区逐步扩展的.     

Grafting of commercially available amines bearing aromatic rings onto poly(vinylidene‐co‐hexafluoropropene) copolymers

The grafting of poly(VDF‐co‐HFP) copolymers with different amines containing aromatic rings, such as aniline, benzylamine, and phenylpropylamine, is presented. ¹⁹F NMR characterization enabled us to show that the sites of grafting of aromatic‐containing amines were first difluoromethylene of vinylidene fluoride (VDF) in the hexafluoropropene (HFP)/VDF/HFP triad and then that of VDF adjacent to HFP. The kinetics of grafting of benzylamine, monitored by ¹H NMR spectroscopy, confirmed those sites of grafting and showed that all VDF units located between two HFPs were grafted in the first 150 min, whereas those adjacent to one HFP unit were grafted in the remaining 3000 min. Parameters such as the temperature or the molar percentage of HFP in the copolymer had an influence on the maximum rate of grafted benzylamine. The higher the temperature, the higher the molar percentage of grafted benzylamine. Furthermore, the higher the molar percentage of HFP in the copolymer, the higher the molar percentage of VDF in the HFP/VDF/HFP triad, and the higher the molar percentage of grafted benzylamine. The spacer length between the aromatic ring and the amino group had an influence on the kinetics of grafting: aniline (pK_a = 4.5) could not add onto the polymeric backbone, whereas phenylpropylamine was grafted in the first 150 min, and benzylamine required 3000 min to reach the maximum amount of grafting. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1855–1868, 2006     

Peroxide initiated maleic anhydride grafting: Structural studies on an ester‐containing copolymer and related substrates

Maleic anhydride (MAn) was grafted onto the low molecular weight esters methyl decanoate (MD) and methyl 2‐ethylhexanoate (MEH) using the free‐radical initiators Lupersol‐101 and ‐130; the esters were used as model compounds for the copolymer poly(ethylene‐co‐methyl acrylate). The grafted products in both cases were isolated from the unreacted ester and were subjected to extensive analysis using spectroscopic and chromatographic techniques. Analysis of the grafted material indicated the presence of one or more succinic anhydride (SAn) residues grafted to the ester. In the case of the multiply grafted material it has been established conclusively by ¹³C‐NMR using 2,3‐¹³C₂ labeled MAn that the multiple grafts exist as single units. A limited number of grafting experiments was performed on the copolymer in the melt and the graft‐modified copolymer was characterized spectroscopically. Single graft units were observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1609–1618, 1999     

Functionalization of polyesters with maleic anhydride by reactive extrusion

Maleic anhydride (MAn) was grafted onto aliphatic and aromatic/aliphatic copolyesters by reactive extrusion in the presence of a free radical initiator using a twin‐screw extruder. The grafting reaction was confirmed by spectroscopic analyses. The presence of succinic anhydride groups was shown by FT‐IR spectroscopy, and NMR spectra indicate that the grafts consist of single succinic anhydride units. The 2D ¹H‐NMR spectra (COSY) indicate that grafting reactions take place at aliphatic dicarboxylic acid units of copolyesters. The graft content was determined by a nonaqueous titration method. The effects of concentration of initiator and monomer and reaction temperature on the graft content and intrinsic viscosity were studied. The low percentage grafting in poly(lactic acid) was observed due to the presence of limited free radical sites in the polymer backbone. Temperature and monomer and initiator concentrations affect the graft content, and the desired graft content with minimal degradation can be obtained by controlling these factors. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1693–1702, 1999     

New Grafted Copolymers Carrying Betaine Units Based on Gellan and N-Vinylimidazole as Precursors for Design of Drug Delivery Systems

New grafted copolymers possessing structural units of 1-vinyl-3-(1-carboxymethyl) imidazolium betaine were obtained by graft copolymerization of N-vinylimidazole onto gellan gum followed by the polymer-analogous reactions on grafted polymer with the highest grafting percentage using sodium chloroacetate as the betainization agent. The grafted copolymers were prepared using ammonium persulfate/N,N,N′,N′ tetramethylethylenediamine in a nitrogen atmosphere. The grafting reaction conditions were optimized by changing one of the following reaction parameters: initiator concentration, monomer concentration, polymer concentration, reaction time or temperature, while the other parameters remained constant. The highest grafting yield was obtained under the following reaction conditions: c_i = 0.08 mol/L, c_m = 0.8 mol/L, c_p = 8 g/L, t_r = 4 h and T = 50 °C. The kinetics of the graft copolymerization of N-vinylimidazole onto gellan was discussed and a suitable reaction mechanism was proposed. The evidence of the grafting reaction was confirmed through FTIR spectroscopy, X-ray diffraction, ¹H-NMR spectroscopy and scanning electron microscopy. The grafted copolymer with betaine structure was obtained by a nucleophilic substitution reaction where the betainization agent was sodium chloroacetate. Preliminary results prove the ability of the grafted copolymers to bind amphoteric drugs (cefotaxime) and, therefore, the possibility of developing the new sustained drug release systems.     

Peroxide-initiated grafting of maleimides onto hydrocarbon substrates

The grafting of N-phenethyl-maleimide (1) onto squalane and eicosane was investigated. As reference substances for spectroscopical investigations homopolymer, N-phenethyl-succinimide (2), t-butyl-(4) and cyclohexyl-N-phenethyl-succinimide (6) were synthesized. The grafting reactions were carried out at 150 °C in 1,2-dichlorobenzene with Luperox 130 as initiator (molar ratio hydrocarbon substrate:1:initiator = 10:1:0.2). Two fractions of graft products were isolated and analysed by ¹H NMR, ¹³C NMR, FTIR and UV spectroscopy, SEC and MALDI-TOF MS to determine the average number of grafted residues per substrate molecule and to elucidate the structure of the grafts and the grafting sites. Overall grafting yields were found to be >90%. Only a small percentage of the total amount of substrate was grafted (2-3%). First fraction of both oligomers (approx. 25 wt%) showed to be a mixture of homopolymers (average degree of polymerization 6) and graft products (approx. 1:3), the latter containing mainly long-chain grafts with an average chain length of 7. The major fraction of graft products contained predominantly single units. As an average number of units per substrate molecule very similar results were obtained for eicosane and squalane (n = ∼ 3). In the case of squalane single units were found to be linked mainly to tertiary carbon atoms, long chain grafts mainly to secondary C-atoms. Apart from the homopolymers resulting from radical transfer, homopolymers terminated with methyl groups resulting from secondary radicals formed by the decomposition of Luperox were also observed. Homopolymers as well as graft products were found to contain small amounts of maleimide groups. The results suggest that as in the mechanism proposed for maleic anhydride, both inter- and intramolecular hydrogen abstraction occurs as part of the chain process. Termination proceeds mainly by hydrogen transfer and also by disproportionation, to a lesser extent. The formation of long chain grafts on tertiary carbons seems to be sterically hindered.     

Grafting of polymers onto a carbon‐fiber surface by ligand‐exchange reaction of poly(vinyl ferrocene‐co‐vinyl monomer) with polycondensed aromatic rings of the surface

To improve the surface of carbon fiber, the grafting reaction of copolymer containing vinyl ferrocene (VFE) onto a carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber was investigated. The copolymer containing VFE was prepared by the radical copolymerization of VFE with vinyl monomers, such as methyl methacrylate (MMA) and styrene, using 2,2′‐azobisisobutyronitrile as an initiator. By heating the carbon fiber with poly(VFE‐co‐MMA) (number‐average molecular weight: 2.1 × 10⁴) in the presence of aluminum chloride and aluminum powder, the copolymer was grafted onto the surface. The percentage of grafting reached 46.1%. On the contrary, in the absence of aluminum chloride, no grafting of the copolymer was observed. Therefore, it is considered that the copolymer was grafted onto the carbon‐fiber surface by a ligand‐exchange reaction between ferrocene moieties of the copolymer and polycondensed aromatic rings of carbon fiber. The molar number of grafted polymer chain on the carbon‐fiber surface decreased with increasing molecular weight of poly(VFE‐co‐MMA) because the steric hindrance of grafted copolymer on the carbon‐fiber surface increases with increasing molecular weight of poly(VFE‐co‐MMA). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1868–1875, 2002     

Graft Copolymerization of (Dimethylamino)Ethyl Methacrylate onto Chitosan Initiated by Ceric Ammonium Nitrate

Abstract

(Dimethylamino)ethyl methacrylate (DMAEMA) was grafted onto chitosan using ceric ammonium nitrate as initiator in acetic acid solution. The effects of reaction variables on the grafting percentage and efficiency percentage were investigated, including the amounts of monomer and initiator, reaction time and reaction temperature. The grafted copolymers were confirmed by FTIR, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results of TGA and DSC indicated the improvement of thermal stability for chitosan‐g‐poly(PDMAEMA). Solubility test revealed the improved hydrophilicity of grafted chitosan in aqueous acetic acid solution, and its swelled behavior in mixtures of glacial acetic acid and anhydrous ethanol (the ratios of 1:1 and 1:2, v/v). The grafted copolymer possessed amphiphilic structure and exhibited properties of polymeric surfactant.     

Morphology,structure, and properties of in situ compatibilized linear low‐density polyethylene/polystyrene and linear low‐density polyethylene/high‐impact polystyrene blends

Blends of linear low‐density polyethylene (LLDPE) with polystyrene (PS) and blends of LLDPE with high‐impact polystyrene (HIPS) were prepared through a reactive extrusion method. For increased compatibility of the two blending components, a Lewis acid catalyst, aluminum chloride (AlCl₃), was adopted to initiate the Friedel–Crafts alkylation reaction between the blending components. Spectra data from Raman spectra of the LLDPE/PS/AlCl₃ blends extracted with tetrahydrofuran verified that LLDPE segments were grafted to the para position of the benzene rings of PS, and this confirmed the graft structure of the Friedel–Crafts reaction between the polyolefin and PS. Because the in situ generated LLDPE‐g‐PS and LLDPE‐g‐HIPS copolymers acted as compatibilizers in the relative blending systems, the mechanical properties of the LLDPE/PS and LLDPE/HIPS blending systems were greatly improved. For example, after compatibilization, the Izod impact strength of an LLDPE/PS blend (80/20 w/w) was increased from 88.5 to 401.6 J/m, and its elongation at break increased from 370 to 790%. For an LLDPE/HIPS (60/40 w/w) blend, its Charpy impact strength was increased from 284.2 to 495.8 kJ/m². Scanning electron microscopy micrographs showed that the size of the domains decreased from 4–5 to less than 1 μm, depending on the content of added AlCl₃. The crystallization behavior of the LLDPE/PS blend was investigated with differential scanning calorimetry. Fractionated crystallization phenomena were noticed because of the reduction in the size of the LLDPE droplets. The melt‐flow rate of the blending system depended on the competition of the grafting reaction of LLDPE with PS and the degradation of the blending components. The degradation of PS only happened during the alkylation reaction between LLDPE and PS. Gel permeation chromatography showed that the alkylation reaction increased the molecular weight of the blend polymer. The low molecular weight part disappeared with reactive blending. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1837–1849, 2003     

Synthesis of random polyampholyte brushes by atom transfer radical polymerization

We report the synthesis of random polyampholyte brushes containing 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and methacrylic acid (MAA). The preparation of polyampholyte brushes is performed by the “grafting from” strategy using surface‐initiated atom transfer radical polymerization (ATRP). The first step consists in the formation of the self‐assembled monolayer of the ATRP initiator. Secondly, the chains are grown from the surface by controlled/“living” radical polymerization. The random copolymer brushes and the corresponding homopolymers brushes containing 2‐(dimethylamino)ethyl methacrylate and tert‐butyl methacrylate (^tBuMA) are prepared. The last step is the deprotection of the ^tBuMA form to the MAA segment by in situ hydrolysis reaction. The annealed DMAEMA group can also be converted to the quenched form by in situ quaternization reaction. This results in the formation of “annealed” and “semiannealed” polyampholyte brushes. The “annealed” polyampholyte corresponds to the random copolymer that contains only annealed units, weak acid and weak base. The “semiannealed” polyampholyte consists of the mixture of annealed (weak acid) and quenched (quaternized segment) units. Polyampholyte brushes with various grafting densities are synthesized and carefully characterized using surface techniques such as ellipsometry and FTIR‐ATR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4305–4319, 2008     

Preparation and Properties of Polyether Pentaerythritol Mono‐maleate grafted Linear Low Density Polyethylene by Reactive Extrusion

A reactive type nonionic surfactant, polyether pentaerythritol mono‐maleate (PPMM) was synthesized in our laboratory. PPMM was adopted as a functionalizing monomer and grafted onto linear low density polyethylene (LLDPE) with a melt reactive extrusion procedure. FT‐IR was used to characterize the formation of grafting copolymer and evaluate their degree of grafting. The effects of monomer concentration, reaction temperature and screw run speed on the degree of grafting were studied systematically. Isothermal crystallization kinetics of LLDPE and LLDPE‐g‐PPMM samples was carried out using DSC. Crystallization rates of grafted LLDPE were faster than that of plain LLDPE at the same crystallization temperature. The tensile properties and light transmission of blown films were determined. Comparing with neat LLDPE film, no obvious changes could be found for the tensile strength, elongation at break and right angle tearing strength of LLDPE‐g‐PPMM film. The wettability is expressed by the water contact angle. With an increasing percentage of PPMM, the contact angles of water on film surface of LLDPE‐g‐PPMM decrease monotonically. The acceleration dripping property of film samples was investigated. The dripping duration of LLDPE‐g‐PPMM film and commercial anti‐fog dripping film at 60°C were 76 days and 17 days, respectively.