Electrochemical stability and transformations of fluorinated poly(2,6-dimethyl-1,4-phenylene oxide)

Fluorination of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) leads to narrowing of its window of electrochemical stability in a cathodic range of potentials. It is found this is connected with appearance of both perfluorinated and incompletely fluorinated units in the polymer. The former units are liable to electrochemical reduction (at potentials <−2.0 V) followed by elimination of fluorine anions and the latter react with basic products (generated at potentials <−1.8 V) of electrochemical reduction of the background solution. In the both cases this results in appearance of conjugated multiple bonds in the fluorinated macromolecules. Quantities of these units in fluorinated PPO were determined with a help of direct and indirect electrochemical reductive degradation techniques.     

Blends of organosilicon polymers with polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)

Blends of organosilicon polymers with polystyrene, PS, and poly(2,6-dimethyl-1,4-phenylene oxide), PPE, were investigated by transmission electron microscopy and differencial scanning calorimetry. Blends with poly(tetramethylsilphenylenesiloxane), PTMPS, showed a morphology characterized by globular domains dispersed in the organic matrix. An apparent homogeneous system was observed when poly(dimethylsilphenylene), PDSP, was mixed with PPE. A crystalline phase was found in samples with a higher PDSP content. The morphology of PS/PDSP blends with low PDSP content showed a dendritic phase dispersed in the PS-rich matrix. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2609–2616, 1997     

Molecular relaxation in the blends of polystyrene/poly(2,6-dimethyl-1,4-phenylene oxide) at low temperature

Molecular relaxation behavior in terms of the α, β, and γ transitions of miscible PS/PPO blends has been studied by means of DMTA and preliminary work has been carried out using DSC. From DSC and DMTA (by tan δ), the observed α relaxation (T_α or T_g) of PS, PPO, and the blends, which are intermediate between the constituents, are in good agreement with earlier reports by others. In addition, the β transition (T_β) of PS at 0.03 Hz and 1 Hz is observed at −30 and 20°C, respectively, while the γ relaxation (T_γ) is not observed at either frequency. The T_β of PPO is 30°C at 0.03 Hz and is not observed at 1 Hz, while the T_γ is −85°C at 0.03 Hz and −70°C at 1 Hz. On the other hand, blend composition-independent β or γ relaxation observed in the blends may be a consequence of the absence of intra- or intermolecular interaction between the constituents at low temperature. Thus it is suggested that at low temperature, the β relaxation of PS be influenced solely by the local motion of the phenylene ring, and that the β or γ relaxation of PPO be predominated by the local cooperative motions of several monomer units or the rotational motion of the methyl group in PPO. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1981–1986, 1998     

A novel synthetic method for preparing poly(2,6-dimethyl-1,4-phenylene oxide)/polystyrene alloy in reactor containing aqueous medium

Considering the defect of solution polymerization of 2,6-dimethylphenol (DMP), the low molecular weight of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) synthesized in water and difficulty in processing of PPO, a novel one-pot synthetic method for preparing PPO/PS alloy in reactor containing aqueous medium was proposed based on green chemistry. In the presence of styrene, DMP was polymerized to form PPO, and then styrene was in situ polymerized under the initiation of dibenzoyl peroxide (BPO) and dicumyl peroxide (DCP), finally thermodynamically compatible PPO/PS alloy was prepared. It was found that the introduction of styrene during the oxidative polymerization of DMP could increase the molecular weight of PPO. When styrene content was 50 wt%, for the synthesized PPO/PS alloy the yield and the weight-average molecular weight were determined to be 95% and 1.7 × 10⁵ for PPO, 93% and 2.0 × 10⁵ for PS, respectively.     

Miscible blends of zinc-neutralized sulfonated polystyrene and poly(2,6-dimethyl 1,4-phenylene oxide)

Zinc-neutralized sulfonated polystyrene ionomers (ZnSPS) and poly(2,6-dimethyl 1,4-phenylene oxide) homopolymer (PXE) form miscible blends up to at least 7.8 mol % sulfonation, as measured by thermal and mechanical criteria. The addition of an equal weight of PXE raises the glass transition temperature of ZnSPS by 40–50°C. However, this miscibility is not achieved by eradicating the microdomain structure present in ZnSPS, even though the PXE coils are considerably larger than the spacings between ionic aggregates. Small-angle x-ray scattering indicates that while the average interaggregate spacing is roughly the same in ZnSPS and its 50/50 blend with PXE at a given sulfonation level, the extent of phase separation is reduced upon PXE addition, indicating that more ionic groups are dispersed in the matrix. Factors influencing miscibility in the ZnSPS/PXE materials and related blends are discussed.     

Effect of styrene-4-vinyl pyridine diblock copolymer on morphological,thermal, and mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether)/polyethylene ionomer blends

The compatibilizing effects of a styrene-4-vinyl pyridine diblock copolymer on the properties of immiscible poly(2,6-dimethyl-1,4-phenylene ether) (PPE)/polyethylene ionomer (Surlyn) blends are investigated by examining the phase morphology and the thermal and mechanical properties. The block copolymer is synthesized by sequential anionic polymerization at ?78°C and melt-mixed with PPE and Surlyn at 290°C. When a small amount of block copolymer is present, the domain size of the dispersed phase becomes smaller. The tensile strength and elongation at break increase with addition of the block copolymer for PPE-rich matrix blends, whereas the tensile strength increases but the elongation at break decreases for Surlyn-rich matrix blends. These effects are interpreted in terms of the interfacial activity and the reinforcing effect of the block copolymer. From the experimental results, it is concluded that the block copolymer plays a role as an effective compatibilizer for PPE/Surlyn blends. © 1994 John Wiley & Sons, Inc.     

Preparation of poly(1,4-phenylene)s by electro-oxidative polymerization

The effect of substituents on the electropolymerization of benzene derivatives and the redox properrties of the corresponding polymers were determined using Brown's substituent constants (σ⁺). Electron-donating groups lower the oxidation potential by which increase in the current efficiency was observed. However, stabilization of the produced cation radicals by the electron-donating groups resulted in a decrease in the polymerization efficiency. The appropriate values of σ⁺ for the efficient polymerization ranged near ?1.5.     

Ternary upper-critical-solution-temperature behavior in a blend system comprising poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene

 Upper-critical-solution-temperature (UCST) behavior in a ternary blend of poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene is reported. The as-cast ternary blend is immiscible at ambient conditions and comprises two different phases, and, however, turns into a miscible system above the “clarity point” ranging from 160 to 300 °C for different ternary compositions. The maximum clarity point is labeled as the UCST for the ternary system, which is about 295 °C. Above the clarity point, the originally immiscible ternary blend turned into one miscible phase. Owing to the thermodynamic UCST behavior and kinetic hindrance, the immiscible ternary polymer blend can be locked into a pseudo-miscible state if it is heated to a temperature above the clarity point followed by a rapid-cooling processing scheme. The quenched ternary blend can remain in a pseudo-miscible state as long as the service temperature does not exceed the glass-transition temperature of the blend. Received: 17 July 2001 Accepted: 3 October 2001     

Miscibility of blends of poly(2,6-dimethyl 1,4-phenylene oxide) with polystyrene-based ionomers and copolymers

Blends of poly(2,6-dimethyl 1,4-phenylene oxide) (PPhO) with the copolymer poly(styrene-co-methacrylic acid) (PS-MAA) and the ionomer poly(styrene-co-sodium methacrylate) (PS-MAA-Na), up to 10 mol% co-unit content, were investigated by dynamic mechanical thermal measurements. The PPhO/PS-MAA-Na blends are compared with PS/PS-MAA-Na blends. The blends of PPhO with PS-MAA are no longer miscible at 10 mol% acid content; this is attributed to a copolymer effect induced by the reduction of PS-PPhO interactions due to the presence of the MAA group which does not interact favorably with PPhO. The blends of PPhO with the ionomer are already immiscible at the lowest ion content studied (2.4 mol%), but become increasingly so as ion content is increased. Despite favorable PS-PPhO interactions, these blends are only a little more miscible than the PS/PS-MAA-Na blends. This is attributed to a combination of the increasing importance of the ionomer cluster phase (from which the homopolymer chains presumably are excluded) as ion content is increased, and of a copolymer effect between the homopolymers and the unclustered phase of the ionomer. These results are compared with published data indicating that blends of PPhO with another biphasic ionomer, zinc sulfonated polystyrene, are miscible. The contrasting behavior is rationalized in part by the suggestion that the copolymer effect between PPhO and the unclustered phase of the latter ionomer, but not of the former, is absent; this is related to multiplet structure and sizes. The analysis made of the above systems is extended to predict what might be the miscibility behavior between PPhO and other PS-based ionomer and related copolymer systems. © 1993 John Wiley & Sons, Inc.     

Model reactions for preparing poly(imino-tetrafluoro-1,4-phenylene)

2,3,4,5,6-Pentafluoroformanilide was prepared giving, in addition, two new compounds 4,5,6,7-tetrafluoro-1-pentafluorophenyl-benzimidazole and 2,3,4,5-tetrafluoro-6-[(pentafluorophenyl)amino]formanilide. Sodium 2,3,4,5,6-pentafluoro-formanilide was reacted with hexafluorobenzene in a molar ratio of 1:4 to give oligomers of α-pentafluorophenyl-ω-fluoro-poly(imino-tetrafluoro-1,4-phenylene). Some of the oligomers were isolated. The results indicate that poly(imino-tetrafluoro-1,4-phenylene) could be formed. Model reaction on hexafluorobenzene with sodium acetanilide, molar ratio 1:2, gave a low yield of N,N′-diacetyl-diphenyl-tetrafluoro-1,4-phenylenediamine.     

Synthesis of new thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing epoxide pendant groups

A new class of thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing pendant epoxide groups were synthesized and characterized. These new epoxy polymers were prepared through the bromination of poly(2,6‐dimethyl‐1,4‐phenylene oxide) in halogenated aromatic hydrocarbons followed by a Wittig reaction to yield vinyl‐substituted polymer derivatives. The treatment of the vinyl‐substituted polymers with m‐chloroperbenzoic acid led to the formation of epoxidized poly(2,6‐dimethyl‐1,4‐phenylene oxide) with variable pendant ratios, and the structures and properties were studied with nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. The ratios of pendant functional groups were tailored for the polymer properties, and the results showed that the glass‐transition temperatures increased as the benzylic protons were replaced by bromo‐, vinyl‐, or epoxide‐functional groups, whereas the thermal stability decreased in comparison with the original polymer. Within a molar fraction of 20–50%, the degree of functionalization had little effect on the glass‐transition temperature; however, it correlated inversely with the thermal stability of each functionalized polymer. The thermal curing behavior of the epoxide‐functionalized polymer was enhanced by the increment of the pendant functionality, which resulted in a significant increase in the glass‐transition temperature as well as the thermal stability after the curing reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5875–5886, 2006     

以硝基、氨基修饰改性聚苯醚

将聚苯醚硝化、还原,分别合成了硝化聚苯醚和胺化聚苯醚,最高硝基、氨基取代度分别为95%、65%.讨论了各种反应条件对取代度的影响,并对修饰改性的聚苯醚进行了表征。     

以硝基,氨基酸饰改性聚苯醚

聚苯醚硝化，还原，分别合成了硝化聚苯醚和胺化聚苯醚，最高硝基，氨基取代度分别为９５％，６５％，讨论了各种反应条件对取代度的影响，并对修饰改性的聚苯醚进行了表征。     

Single crystals of poly(2,6-dimethyl-1,4-phenylene)oxide

Summary Poly(2,6-dimethyl-1,4-phenylene)oxide crystals obtained from 0.1%-pinene solutions by isothermal growth at temperatures from 80–90 as well as 100 °C, were investigated by optical and X-ray diffraction techniques. A study has been made by differential scanning calorimetry in order to measure the melting point, glass transition and melting point depression temperatures of mixtures of the polymer with-chloro-naphthalene.The densities of the dry mats of single crystals were measured by a flotation method.

---

Zusammenfassung Poly(2,6-dimethyl-1,4-phenylen)oxid Kristalle, die aus 0,1% igen-Pinen-Lösungen durch isothermes Wachstum bei Temperaturen von 80–90 sowie 100 °C erhalten wurden, wurden optisch und röntgenographisch untersucht. Mit der Differential-scanning-Kalorimetrie ergaben sich die Werte des Schmelzpunkts, der Glastemperatur und der Schmelzpunktdepressionen von Mischungen des Polymeren mit-Chlornaphthalin. Die Dichten der trockenen Matten aus Einkristallen wurde mit der Flotationsmethode gemessen.

     

Light-emitting diodes based on poly(2,3-diphenyl-1,4-phenylene vinylene)

In this paper we report polymer light-emitting diodes based on (2,3-diphenyl-1,4-phenylene vinylene) (DP-PPV), a novel π-conjugated polymer made by using the chlorine precursor route (CPR). Thin films of the precursor polymer were formed by spin-casting on indium-tin oxide (ITO) coated glass substrates, followed by thermal conversion to give DP-PPV thin films. Single layer DP-PPV LEDs were completed by thermally evaporating magnesium (Mg) electrodes. The electroluminescent characteristics of ITO/DP-PPV/Mg devices as well as variations between precursor polymer batches are presented. Bilayer LEDs were also made, for which tris(8-hydroxyquinoline)aluminum (Alq₃) was thermally sublimed on the fully converted DP-PPV films in vacuum, followed by Mg deposition. Both significant improvement in the quantum efficiency (up to 0.7% ph/el) and a reduction in the turn-on voltage of the device were found upon incorporation of the Alq₃ layer. These observations suggest that Alq₃ enhances the injection of electrons and also participates in the recombination process. © 1997 John Wiley & Sons, Ltd.     

Anomalous viscosity behavior of rodlike polyelectrolytes: Partially sulfonated poly(2-benzoyl-1,4-phenylene)s in aqueous solution

Two stereoisomeric poly(2-benzoyl-1,4-phenylene)s were synthesized. Polymer I has exclusively a head-to-tail structure; however, polymer II contains both head-to-head and head-to-tail units. The sulfonation reaction of polymers I and II was found to occur mainly on the meta position of the benzoyl group on the phenylene backbone. The viscosities of polymers Ia (27% sulfonated) and Ic (51% sulfonated) in aqueous solutions at 25°C were measured with and without NaBr addition. Upon the addition of NaBr (0.05 and 0.1M), the reduced viscosities were found to increase gradually and reach a constant value in each case after standing at room temperature for 30–40 h. Without NaBr, the time effect was not found. The reduced viscosities of solutions with NaBr were also higher than those without the salt. These results are quite different from the typical “polyelectrolyte” behavior. A possible explanation of the salt effect of rigid rodlike polymers such as sulfonated poly(2-benzoyl-1,4-phenylene) is discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1425–1429, 1998     

On the plasticization of poly(2,6-dimethyl phenylene oxide) by CO2

Change in the glass transition temperature, T_g, of poly(2,6-dimethyl phenylene oxide), PPO, due to the dissolved CO₂ has been measured as a function of the gas pressure, p, using a high-pressure DSC cell. At 61.2 atm, the highest pressure studied, T_g is depressed by 31.6°C. The depression in T_g is found to be linear with pressure, with dT_g/dp of ?0.5°C atm^?1. The experimental results are in fair agreement with those calculated from a quasilattice solid-solution model for polymer-diluent systems. The present results, however, differ markedly from a recent investigation on PPO-CO₂ system which reported a depression in T_g of 226°C at 60 atm and a dT_g/dp of ?3.8°C atm^?. © 1994 John Wiley & Sons, Inc.