Controlled production of patterns in iridescent solid films of cellulose nanocrystals

A method to produce predefined patterns in solid iridescent films of cellulose nanocrystals (CNCs) by differential heating of aqueous CNC suspensions during film casting has been discovered. Placing materials of different temperatures beneath an evaporating CNC suspension results in watermark-like patterns of different reflection wavelength incorporated within the final film structure. The patterned areas are of different thickness and different chiral nematic pitch than the surrounding film; heating results in thicker areas of longer pitch. Thermal pattern creation in CNC films is proposed to be caused by differences in evaporation rates and thermal motion in the areas of the CNC suspension corresponding to the pattern-producing object and the surrounding, unperturbed suspension. Pattern formation was found to occur during the final stages of drying during film casting, once the chiral nematic structure is kinetically trapped in the gel state. It is thus possible to control the reflection wavelength of CNC films by an external process in the absence of additives.     

Fully-biodegradable poly(3-hydroxybutyrate)/poly(vinyl alcohol) blend films with compositional gradient

Fully-biodegradable bacterial poly(3-hydroxybutyrate) (PHB)/chemosynthetic poly(vinyl alcohol) (PVA) blend films with compositional gradient from one surface to the other surface of the films were prepared by a dissolution-diffusion technique. Three kinds of PVA samples, high- and low-molecular weight atactic PVA and highly syndiotactic PVA (s-PVA), were used in order to investigate the effects of molecular weight and tactic structure on the generation of compositional gradient. The solution of PHB in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), which is also a good solvent for PVA, was cast on the PVA film and then the solvent HFIP was evaporated. By selecting the optimum volume of solvent and the evaporation rate, the PHB/PVA blend film with compositional gradient was obtained. The formation of compositional gradient was confirmed by FT-IR microscopy and ATR-FT-IR analysis. The 50%/50% PHB/s-PVA blend film with a nearly ideal compositional gradient, that is, the composition of PHB (or PVA) in the film changing gradually from 100% at one surface to 0% at the other surface of the film was obtained by casting PHB/HFIP solution on to the s-PVA film. Positional dependence of the absorbance of C==O and OH stretching bands along the film thickness direction for the PHB/S-PVA cast films.     

Detection of free surface composition and molecular-level structural development of styrene(S)/butadiene(B) block copolymer films during a solution-to-film process

The surface chemical structure development in solution-cast styrene(S)/butadiene(B) block copolymer films as a function of solvent evaporation time was investigated using sum frequency generation vibrational spectroscopy(SFG).The surface structure formation of the styrene(S)/butadien(B) block copolymer(30 wt% PS) films during the solution-to-film process was found to be controlled mainly by dynamic factors,such as the mobility of the PB block in solution.For SB diblock copolymers,a pure PB surface layer was formed only when the film was cast by dilute toluene solution.With increasing concentration of casting solution,PB and PS components were found to coexist on the film surface,and the morphology of the PB component on the film surface changed from cylindrical rods to spheres.For SBS triblock copolymers,a small amount of PS component existed on the surface even if the film was cast by 1.0 wt% toluene solution.In addition,PS components at the outermost layer of the film increased and the length of PB cylindrical rods on the surface decreased with increasing concentration of casting solution.     

Interfacial Interaction of Polymer/Liquid Crystal Molecules and Electrooptical Properties of their Composite Systems

Polymer/liquid crystal composite films were prepared from a solution of polymer and nematic liquid crystal (LC) by a solvent casting method. The phase-separated structure of the composite film was controlled by the solvent evaporation rate. The light-scattering profile of a poly(diisopropyl fumarate)/LC: 40/60 w/w solution during solvent evaporation exhibited a periodic structure, indicating that the phase-separated structure was formed by spinodal decomposition. The aggregation structure of the composite film was investigated with a scanning electron microscope (SEM). SEM observation of the composite film suggested the presence of periodicity and dual connectivity of polymer and LC phases. The faster the solvent was evaporated, the smaller the LC channel (domain) size in the composite film. The composite film, composed of poly(methyl methacrylate) (PMMA) and a nematic LC (E44) with a positive dielectric anisotropy, exhibited remarkable and reversible light-scattering-light-transmission switching, under the modulation of an ac electric field. The light-scattering state was dependent on such optical heterogeneities as spatial distribution of the nematic directors and/or mismatching in the refractive indices of the components. The electrooptical behavior of the composite film was strongly dependent on the LC channel (domain) size in the composite film. The transmittance increased and the rise and decay response times (τ_R and τ_D), decreased and increased, respectively, with an increase in the size of the LC channel (domain).

The electrooptical switching properties for the polymer/LC composite film should be influenced by miscibility between the polymer and the LC phases. The miscibility between both phases was evaluated from a distribution of relaxation time for interfacial polarization. The anchoring effect was also investigated by measuring the nonlinearity of the dielectric constant for the composite system.     

Thin films of nylon 13,13 casted on water: Morphology and properties

Substrate-free thin film of Nylon 13,13 has been prepared continuously by casting the polymer on a water surface from m-cresol solution. The uniform thickness of film is ca. 500 A, as measured with a Profilometer. Film morphology and properties have been characterized by transmission electronic microscopy (TEM), x-ray photoelectron spectroscopy, wide-angle x-ray scattering, differential scanning calorimetry and by contact angle measurements. Results show that there is no preferential accumulation of the amide group toward the water surface. A spherulite structure exists in this film with a crystallinity of 26% by DSC. Fibers were drawn from the films which had a tensile modulus of 5 GPa, stiffer than reported for this nylon as prepared by other means. Other members of the nylon series, such as Nylon 6, Nylon 12, have also been prepared in films by the same casting method under modified conditions. © 1995 John Wiley & Sons, Inc.     

Tuning hydrophobicity of a fluorinated terpolymer in differently assembled thin films

In the current report, casting from good solvent (acetone) and casting from mixed solvent and nonsolvent were employed for preparing thin films of terpolymer of T etrafluoroethylene (TFE), H exafluoropropylene (HFP), and V inylidene fluoride (VDF) (THV), on silicon wafers. These films revealed various morphologies and wetting behaviors depending on the solution concentration, temperature, and thin film preparation method. The THV thin films prepared by casting from good solvent showed smooth morphology with holes. The thin film prepared from a 3 wt % THV/acetone solution by casting from good solvent at 15 °C demonstrated spheres in addition to the smooth morphology, while the thin film prepared from a 5 wt % THV/acetone solution at 15 °C by casting from good solvent had a mesh‐like structure with some linked spheres. Casting the thin films from mixed solvent and nonsolvent resulted in various morphologies such as different sphere sizes embedded in a dense film layer, and hexagonal close packed structures. The thin films prepared by casting from good solvent showed a slightly hydrophobic character, with a measured water contact angle of approximately 99°, while the nonsolvent cast films had a water contact angle as high as 145°. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 643–657     

Morphology of microporous poly(vinylidene fluoride) membranes studied by gas permeation and scanning electron microscopy

Microporous poly(vinylidene fluoride) (PVDF) membranes with asymmetric pore structure were prepared by a wet phase inversion process. The polymer was precipitated from a casting solution when immersed in a cold water (gelation) bath. The casting solution was, in most cases, composed of polymer, solvent, and nonsolvent. In this solvent-nonsolvent system, the solvents used were triethylphosphate (TEP) and dimethylsulfoxide (DMSO), and the nonsolvents used were glycerol and ethanol. Mean pore sizes and effective porosity of the microporous membranes were calculated using the gas permeation method. They were studied as a function of evaporation time of wet nascent film, polymer molecular weight, concentration of polymer, and concentration of nonsolvent. The morphology of the membranes was examined by scanning electron microscopy (SEM).     

Poly(caprolactone triol) as plasticizer agent for cellulose acetate films: influence of the preparation procedure and plasticizer content on the physico‐chemical properties

The influence of the plasticizer content and film preparation procedure on the morphology, density, thermal and mechanical properties of cellulose acetate (CA) films plasticized with poly‐(caprolactone triol) (PCL‐T), were studied. Differential scanning calorimetry (DSC), thermal mechanical analysis (TMA), scanning electron microscopy (SEM), wide‐angle X‐ray diffraction (WAXD) and infrared spectroscopy (FT‐IR) techniques were used. The films were prepared by dry‐casting CA and CA/PCL‐T in acetone or acetone/water solutions, which produced transparent and opaque films, respectively. In contrast to the transparent films, which were dense, the opaque films presented a porous morphology. However, the presence of PCL‐T reduced the opaque film porosity, increasing, in consequence, its bulk density. The TMA results revealed that PCL‐T reduced the glass transition temperature more significantly in the transparent than in opaque films. Only the transparent CA/PCL‐T films presented a melting temperature, that reduced with higher concentrations of PCL‐T, suggesting a higher ordering (crystallinity) when the films were prepared in the absence of water, as observed from WAXD curves. The mechanical properties also showed that the transparent films were more soft and tough than the opaque films. In summary, PCL‐T was a good plasticizer agent for CA films due to the presence of hydrogen bonds between the components (FT‐IR spectra). The presence of water in the dry casting process has a significant effect mainly on film morphology and mechanical properties. Copyright © 2004 John Wiley & Sons, Ltd.     

纤维素/甲壳素共混膜的结构表征与抗凝血性能

以 6wt %NaOH 4wt%尿素为纤维素的新溶剂 ,采用溶液共混法制备出纤维素 甲壳素共混膜 ,为甲壳素在碱性溶液中制膜提供了新的方法 .红外光谱、X 射线衍射、扫描电镜和力学性能、抗凝血性能测试结果表明 ,共混膜中甲壳素含量低于 4 0wt%时 ,纤维素与甲壳素分子间具有良好的相容性 ;在纤维素中引入适量甲壳素可提高共混膜的抗张强度 ,共混膜的干、湿态抗张强度在甲壳素含量 10wt%时最大 ,其值分别为 89 1MPa和 4 3 7MPa ,比纯态纤维素膜的干、湿态抗张强度分别提高了 6 7%和 11 5 % ;甲壳素的引入可明显降低血小板在共混膜表面的粘附、凝聚与变性 ,增大共混膜的抗凝血参数 ,甲壳素含量达到 5 0wt%时 ,该共混膜具有良好的抗凝血性能     

Superhydrophobic and lipophobic properties of self-organized honeycomb and pincushion structures

This report describes the simple preparation of superhydrophobic and lipophobic surfaces by self-organization. Microporous polymer films of a fluorinated polymer with hexagonally arranged pores were prepared by casting from solution under humid conditions. Hexagonally packed water microdroplets were formed by evaporative cooling on the surface of the casting solution. After solvent evaporation, a honeycomb-patterned polymer film was formed with the water droplet array acting as a template; the water droplets themselves evaporated soon after the solvent. Two porous polymer layers were stacked vertically, separated by pillars at the hexagon vertexes. After peeling off the top layer using adhesive tape, a pincushion-like structure was obtained. Here, we show that superhydrophobic behavior was achieved, with the maximum contact angle, 170 degrees, observed using these pincushion structures. Theoretical calculations fit the experimental results well. The lipophobic properties of the films are also discussed.     

Mechanically robust,flame-retardant and anti-bacterial nanocomposite films comprised of cellulose nanofibrils and magnesium hydroxide nanoplatelets in a regenerated cellulose matrix

Nanocomposite films consisting of cellulose nanofibrils (CNFs), magnesium hydroxide nanoplatelets (MHNPs) and regenerated cellulose were prepared via simple blending and casting processes. The CNFs were obtained from bamboo pulp by ultrasonic treatment coupled with high shear homogenization. The morphology, structure and properties of the nanocomposite films were comprehensively analyzed using various characterization techniques, including the scanning electron microscope, digital microscope, limiting oxygen index (LOI), micro-scale combustion calorimetry, antibacterial assays, tensile testing, etc. When the MHNP content was optimized to 30 wt%, the nanocomposite film exhibited the best overall properties. The LOI of the composite film increased from 20.0 (0 wt% MHNPs) to 32.7 (30 wt% MHNPs), making it a flame-retardant material in air. In addition, the film containing 30 wt% MHNPs showed excellent antibacterial activity. However, the increase in MHNP content would result in gradual deterioration of the films’ mechanical properties. However, the incorporation of CNFs could significantly suppress this trend. The present work provided a promising pathway for manufacturing multifunctional and high-performance cellulose-based composite films, which were potentially useful for a variety of packaging materials, especially in the biomedical and food packaging fields.     

Solvent- and Temperature-Dependent Assembly in Monolayer Films of a Ferrocene-Naphthyridine Hybrid on HOPG

The formation of a monolayer film of bis-naphthyridyl ferrocene on highly oriented pyrolytic graphite (HOPG) at ambient conditions is demonstrated. The films are prepared by drop casting from different solvents. The microscopic structure of the films is understood using atomic force microscopy (AFM) and scanning tunnelling microscopy (STM). The analysis reveals two different types of Phases (I and II) in the films and the relative percentage of these phases depends on the nature of the solvents used for the preparation and the thermodynamical condition. Solvents like methanol, acetonitrile and DMF exclusively select Phase-I, whereas acetone and ethanol show a mix of both phases at room temperature. The different phases are formed by different conformers of the molecule. We also show that the selectivity of one of the phases over the other is related to the difference in the energetics for the formation of these phases.     

Instabilities during the formation of electroactive polymer thin films

The solvent-induced film structure of poly(n-vinyl carbazole) (PVK) thin films on indium tin oxide (ITO)-coated glass was examined. PVK thin films were prepared via spin-coating using five different solvents. We investigated the relationship between the solvent characteristics and film properties, including surface roughness and structure, film thickness, and density. The spin-coated polymer thin films are not in thermodynamic equilibrium; rather, the film properties are affected by the dynamics of the spin-coating process. We found that water present in tetrahydrofuran (THF) induces dewetting of PVK films during the spin-coating process. Solvents with a high evaporation rate lead to high surface roughness due to Marangoni convection. The results show that the surface roughness and structure of the films are dominated by the dynamics of the film formation process, rather than thermodynamic interactions between the polymer and solvents.     

Modification and Characterization of Chitosan Films Using 3-trimethoxyl Silyl Propylmethacrylate

The biodegradable flexible chitosan film was prepared by solution casting. The physico-mechanical properties, polymer loading (PL), gel content and water uptake of the chitosan film were studied. The tensile strength (TS) and % elongation at break (Eb) of the uncured chitosan film were 7.0 (MPa) and 8%, respectively. Four formulations were developed using 3-trimethoxyl silyl propylmethacrylate (TSPMA) (varied from 10–80% by weight) in methanol along with photoinitator (Darocur-1664). The raw chitosan films were then soaked in the prepared formulations and cured under UV radiation at different intensities to improve the physico-mechanical properties of the films. TS for the photocured chitosan film was 28.0 (MPa) which was 4 times higher compared to the uncured chitosan film. This TS was obtained for the formulation containing 30% silane (TSPMA) at 24th UV pass for 4 min soaking time. The maximum PL of 45.1% was obtained for the same formulation at 24th UV pass for 4 min soaking time. The water uptake and gel content of the photocured chitosan films were also studied. The scanning electron micrographs of the photocured chitosan film showed smooth surface, compact and homogeneous structure.     

Synthesis, characterization and hydrolytic stability of poly (amic acid) ammonium salt

A series of new poly (amic acid) ammonium salt (PAAS) precursors were prepared by incorporating different amounts of triethylamine (TEA) into terpolymer polyamic acid (PAA), which was synthesized by pyromellitic dianhydride (PMDA), 4,4’-oxydianiline (ODA) and p-phenylenediamine (PDA) in dimethylacetamide (DMAc). Then, the PAAS films were made by casting their solutions onto glass plates followed by the evaporation of the solvent. The chemical structure of PAAS films was confirmed by ¹H NMR and FTIR spectroscopy. Mechanical properties, intrinsic viscosities and solubility of PAAS precursors were examined, respectively. It was found that the intrinsic viscosity of PAA solution obviously decreased with storage time during 30 days, while no distinct changes were observed in the intrinsic viscosity of the PAAS (the mole ratio of TEA/repeating unit of PAA = 2/1) solution after 90 days. The results suggested that hydrolytic stability of the PAAS films was significantly improved as compared with that of PAA film due to the polyelectrolyte structure of PAAS. Moreover, the thermal and mechanical properties of polyimide (PI) films prepared from PAAS precursors were also investigated, respectively.     

Investigation of the structural properties of annealed CdIn2Te4/CdS thin film solar cells produced by the electron-beam evaporation (e-beam) technique

Thin film CdIn₂Te₄/CdS solar cells were deposited onto the ITO-coated glass substrate by electron beam evaporation (e-beam) technique, and the the effect of annealing on their structural properties is studied. The annealing was performed under nitrogen atmosphere for 1 h. The manufactured solar cells were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDAX) analysis. Crystallite size (D), inter-planer distance (d) and lattice constant (a) values were calculated for the thin film solar cell from XRD data. Annealed samples display well defined XRD patterns with three diffraction peaks. We observed increased peak intensity in the annealed films. EDAX analysis showed that only CdIn₂Te₄ is present in absorber layer and CdS is found in the window layer, but no impurity atoms are present the structure. It is observed that surface roughness of the annealed films incresed, according to SEM images. The I–V characteristics show that the current is increased for annealed thin films solar cells.

     

Improved surface properties of polyaniline films by blending with Pluronic polymers without the modification of the other characteristics

Films of conductive polyaniline and amphiphilic Pluronic (P105) copolymer blends were prepared by dissolving the two polymers in N-methylpyrrolidinone (NMP) followed by a slow solvent evaporation at 55 degrees C. The characteristics of both doped and undoped films were determined by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), water droplet contact angles, differential scanning calorimetry (DSC), thermal gravimetry analysis (TG), wide-angle X-ray diffraction (WAXD), and tensile strength measurements. The surface of the blends became more hydrophilic than that of the hydrophobic PANI film, but the other properties of the blends did not change appreciably for Pluronic content lower than 50 wt%. Compared to PANI films, the more hydrophilic surfaces decreased the amount of bovine serum albumin protein adsorbed. By preventing biofouling, the polyaniline-Pluronic blends can become more useful as biosensors than the polyaniline films.     

Biobased films prepared from NaOH/thiourea aqueous solution of chitosan and linter cellulose

In the present study, films based on linter cellulose and chitosan were prepared using an aqueous solution of sodium hydroxide (NaOH)/thiourea as the solvent system. The dissolution process of cellulose and chitosan in NaOH/thiourea aqueous solution was followed by the partial chain depolymerization of both biopolymers, which facilitates their solubilization. Biobased films with different chitosan/cellulose ratios were then elaborated by a casting method and subsequent solvent evaporation. They were characterized by X-ray analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermal analysis, and tests related to tensile strength and biodegradation properties. The SEM images of the biofilms with 50/50 and 60/40 ratio of chitosan/cellulose showed surfaces more wrinkled than the others. The AFM images indicated that higher the content of chitosan in the biobased composite film, higher is the average roughness value. It was inferred through thermal analysis that the thermal stability was affected by the presence of chitosan in the films; the initial temperature of decomposition was shifted to lower levels in the presence of chitosan. Results from the tests for tensile strength indicated that the blending of cellulose and chitosan improved the mechanical properties of the films and that an increase in chitosan content led to production of films with higher tensile strength and percentage of elongation. The degradation study in a simulated soil showed that the higher the crystallinity, the lower is the biodegradation rate.     

Thermal characterization of usnic acid/collagen-based films

The purpose of this study was to evaluate the physical–chemical properties of collagen (CL) and usnic acid/collagen-based (UAC) films, using differential thermal analysis (DTA), thermogravimetry (TG/DTG), infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Both films were prepared by casting process using polyethylene glycol 1500 (PEG 1500) as plasticizer. In the spectrum of UAC, similar bands of the usnic acid are observed, indicating that the polymerization (film formation) did not affect the stability of the drug. Distinctly, DTA curve of UAC did not show an endothermic peak at 201 °C, indicative that the drug was incorporated into the polymeric system. These results were corroborated by the scanning electron microscopy (SEM). The TG/DTG curves of UAC presented a different thermal decomposition profile compared to the individual compounds and CL. These findings suggest the occurrence of molecular dispersion or solubilization of the drug in the collagen film.     

真空蒸镀法制备锡薄膜及其嵌锂电化学性能

采用真空蒸镀法在铜片基底上沉积锡薄膜作为锂离子电池负极材料,对所制备的锡薄膜采用扫描电子显微镜、X射线衍射表征,研究了其表面形貌和组成。 将制备的薄膜在手套箱中组装成CR2032型钮扣式电池,进行电化学测试,研究其电化学性能。 实验结果表明,在相同蒸发时间和基底温度的条件下,随着蒸发功率的增加,沉积的锡颗粒逐渐增大,相应的电化学性能降低。 以蒸发功率200 W、基底温度150 ℃制得的样品粒径为100~200 nm,含有Cu6Sn5合金相,以0.2C倍率充放电循环20周后放电容量达527 mA·h/g。