基于三脚架羧酸和咪唑基配体的两种镉基配合物的合成、结构与荧光性质

通过水热法合成了2种镉基配位聚合物[Cd(Htatb)(1,4-bimb)]· H₂O (1)和[Cd(Htatb)(1,4-bib)( H₂O)]·DMF (2)(H3tatb=4,4′,4″-s-三嗪-2,4,6-三苯甲酸,1,4-bimb=1,4-双(咪唑-1-甲基)苯,1,4-bib=1,4-双(1-咪唑基)苯),并用X射线单晶衍射、热重分析、红外光谱和元素分析等手段对其进行了表征。1是一个2D层结构,这些层进一步通过O—H…O氢键连接,形成四重互穿3D结构。2也是2D层结构,通过O—H…O氢键进一步连接,形成二重穿插的3D结构。配合物1和2具有荧光性质。1通过不同的检测机制对硝基苯和Fe³⁺离子具有高度的选择性和敏感性,而2对2,4,6-三硝基苯酚和CrO₄^2-离子具有高度的选择性和敏感性。     

基于V型双咪唑与二羧酸混合配体Zn2+配位聚合物的合成、结构与性质

通过溶剂热合法,制备了两种新的Zn²⁺配位聚合物{[Zn(bib)(bdc)]•DMF}_n(1)和{[Zn(bib)(bpdc)]•H₂O}_n(2)(bib=1,3-双(1-咪唑)苯,H₂bdc=1,4-苯二甲酸,H₂bpdc=4,4'-联苯二甲酸,DMF=N,N-二甲基甲酰胺）。通过单晶X-射线衍射确定了两个配合物的结构：配合物1属于三斜晶系,空间群为P-1,是一种由bib和ndc^2-配体混合连接二维网络结构,配合物2属于单斜晶系,空间群为P2₁/n,表现出了二重互穿二维网络结构。      

吡啶盐/咪唑盐调控钴萘基二膦酸配位聚合物的结构和性质

通过引入质子化的1,3-二(4-吡啶基)丙烷(1,3-dppH₂²⁺)和双(咪唑-1-甲基)苯(1,4-bixH₂²⁺)作为阳离子模板,采用水热反应,得到3种基于1,4-萘二膦酸(1,4-ndpaH₄)配体的钴萘二膦酸配位聚合物：(1,3-dppH₂)₂[Co₄(1,4-ndpa)(1,4-ndpaH)₂(1,4-ndpaH₂)]·6H₂O (1)、(1,4-bixH₂)_0.5[Co(1,4-ndpaH)](2)和(1,4-bixH₂)_0.5[Co₂(1,4-ndpaH)(1,4-ndpaH₂)(H₂O)₂](3)。对配合物1～3分别进行了元素分析、红外光谱、单晶X射线衍射、...     

基于半刚性乳酸衍生物的单一手性配位聚合物的合成、 结构与性质

在溶剂热反应条件下, 用预先合成的乳酸衍生物(R)-H₂CBA和(S)-H₂CBA分别与含氮辅助配体(E)-1,2-二(4-吡啶基)乙烯(DPEE)和1,4-二(1H-咪唑-1-基)苯(1,4-DIB)组合, 制备出2对不同结构的单一手性配位聚合物[Cd₂((R)-CBA)₂(DPEE)(H₂O)₂]_n(1-D), [Cd₂((S)- CBA)₂(DPEE)(H₂O)₂]_n(1-L), [Cd((R)-CBA)(1,4-DIB)]·H₂O(2-D)和[Cd((S)-CBA)(1,4-DIB)]·H₂O(2-L). 其中1-D和1-L是由梯形Cd-CBA链和DPEE配体连接成的二维框架结构; 而2-D和2-L是三维超分子框架结构, 包含3种不同类型的对映手性螺旋链. 对上述化合物进行了粉末X射线衍射、 热重分析和圆二色谱分析, 并对其荧光性质进行了讨论.     

两个基于八钼酸盐的无机-有机杂化材料的合成、结构和光催化性能

通过水热法成功合成了两个新的基于(β-Mo₈O₂₆)^4-构型的无机-有机杂化材料,分子式分别为{[Ni(β-Mo₈O₂₆)(H₂O)₄](H₂Fbix) 2H₂O}_n(1)和{[Co(β-Mo₈O₂₆)(H₂O)₄](H₂Fbix) 2H₂O}_n(2)(Fbix=2,3,5,6-四氟-二(1,4-咪唑-1-甲基)苯)。利用X-射线单晶衍射、X-射线粉末衍射、红外光谱、热重分析和元素分析等对该化合物的结构和性能进行了表征。晶体结构分析表明：化合物1和2为同构化合物。在化合物1中,扭曲八面体构型的Ni^II与两个β-[Mo₈O₂₆]^4-单...     

二维配位聚合物[Tb(1,4⁃bdc)1.5(phen)(H2O)]n的合成、晶体结构及对Fe3+离子的荧光检测

通过溶剂热反应成功合成出一种新型2D配位聚合物[Tb(1,4-bdc)_1.5(phen)(H₂O)]_n(1)(1,4-H₂bdc=对苯二甲酸;phen=菲咯啉)。对其进行了单晶X射线衍射、粉末X射线衍射、红外光谱、元素分析、荧光光谱表征。X射线衍射晶体学分析表明,配合物1结晶于三斜晶系P1空间群,2个相邻的Tb(Ⅲ)离子与4个1,4-bdc^2-通过—O—C—O—桥联成双核单元,并进一步通过1,4-bdc^2-桥联成二维层状结构。荧光实验证明配合物1可以通过荧光猝灭机制检测Fe₃₊,Ksv=8.39×10³ L·mol-1,检测限为0.017μmol·L^-1。     

二维配位聚合物[Tb(1,4⁃bdc)1.5(phen)(H2O)]n的合成、晶体结构及对Fe3+离子的荧光检测

通过溶剂热反应成功合成出一种新型2D配位聚合物[Tb(1,4-bdc)_1.5(phen)(H₂O)]_n(1)(1,4-H₂bdc=对苯二甲酸;phen=菲咯啉)。对其进行了单晶X射线衍射、粉末X射线衍射、红外光谱、元素分析、荧光光谱表征。X射线衍射晶体学分析表明,配合物1结晶于三斜晶系P1空间群,2个相邻的Tb(Ⅲ)离子与4个1,4-bdc^2-通过—O—C—O—桥联成双核单元,并进一步通过1,4-bdc^2-桥联成二维层状结构。荧光实验证明配合物1可以通过荧光猝灭机制检测Fe₃₊,Ksv=8.39×10³ L·mol-1,检测限为0.017μmol·L^-1。     

基于芳香四羧酸构筑的两种配位聚合物的荧光及磁性质（英文）

在溶剂热条件下,基于芳香四羧酸合成了2种新颖的配位聚合物:{[Zn2(tptc)(1,4-bimb)2]·H2O}n(1)和{[Ni(tptc)0.5(1,2-bimb)(H2O)]·H2O}n(2),其中,tptc为对-三联苯-3,3″,5,5″-四羧酸,1,4-bimb为1,4-二(咪唑-1-亚甲基)苯,1,2-bimb为1,2-二(咪唑-1-亚甲基)苯。结构分析表明,1为三维结构,拓扑符号为(86);2为二维层状网络,通过氢键相互作用进一步扩展为三维超分子结构。此外,我们还研究了1对阳离子、阴离子的荧光感应以及2的磁性质。     

基于苯四甲酸和双(咪唑基甲基)苯配体的三维Cd-MOF的合成、结构及荧光性质

选择刚性的1,2,4,5-均苯四甲酸(H4L)为主配体,以1,3-双(1H-咪唑-1-基甲基)苯(1,3-bib)为辅助配体,在水热条件下,与过渡金属离子Cd2+配位合成了配合物[Cd(L)0.5(1,3-bib)(H2O)]·H2O (1).利用元素分析、红外光谱、X射线单晶衍射、热重和X射线粉末衍射对其结构进行了表...     

以D-樟脑酸与1,4-二（咪唑-1-基）丁烷为配体构筑的两个配位聚合物的结构与磁性

水热合成了2个以D-樟脑酸(D-H2cam)与1,4-二(咪唑-1-基)丁烷(1,4-bimb)为配体的配位聚合物:[Co(D-cam)(1,4-bimb)]n·4nH2O(1)和[Ni(D-cam)(1,4-bimb)]n(2)。通过X-射线单晶衍射,元素分析,红外光谱,XRD分析,热重,和磁性分析对其结构进行了表征。测定了这两个聚合物的磁性。结构分析表明,1为P2空间群,其链状结构由氢键作用连接形成二维结构;2为Pna21空间群,呈四重穿插的dia网络结构。     

Organogermyl,Organostannyl, and Organoplumbyl Phosphines,Arsines, Stibines,and Bismuthines

The preparation, properties, and reactions of the compounds named in the title are described, with particular reference to the possible participation of (p→d)_π components in the bonding between the group IVB and the group VB elements.     

Pi bonding and negative hyperconjugation in mono-, di-, and triaminoborane, -alane, -gallane, and -indane

A systematic quantum chemical investigation of mono-, di-, and triaminoborane, -alane, -gallane, and -indane is carried out to determine quantitatively the effects of pi bonding and negative hyperconjugation on structures, energetics, and rotational barriers in these systems. Pi bonding plays a significant role in the aminoborane compounds, but becomes rapidly less significant in the aminoalanes, -gallanes, and -indanes. For each main-group metal X investigated, X-N rotational barriers are found to be essentially equal depending only on the number of remaining in-plane amino groups. The contribution of negative hyperconjugation to reducing rotational barriers, as assessed from natural bond orbital (NBO) delocalization energies, is independent of the pyramidalization of the out-of-plane amino group, and is also dependent only on the number of rotated groups. Optimized tris[bis(trimethylsilyl)amino]-substituted structures of boron, aluminum, gallium, and indium are found to compare quite well with available experimental structural data, and exhibit X-N torsion angles that are independent of the central metal atom.     

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.     

Acrolein polymerization: Monodisperse,homo, and hybrido microspheres,synthesis, mechanism,and reactions

Monodisperse polyacrolien (PA) microspheres were obtained by a single step process via two mechanisms: (a) aqueous polymerization of acrolein under alkaline conditions and (b) aqueous radical polymerization of acrolein by irradiation with a cobalt source. The diameter of the former microspheres can be varied from 0.04 up to 8 μm. The monodispersity of the system is also discussed. The diameter of the latter microspheres can be varied up to 0.2 μm. Hybrido PA microspheres were formed by grafting PA microspheres of average diameter of 0.1 μm obtained by irradiation onto the surface of PA microspheres produced by the alkaline mechanism. The aldehyde content of the microspheres prepared by irradiation is much higher than those of the microspheres formed under alkaline conditions. The aldehyde groups were used for the covalent binding of ligands containing primary amino groups, such as proteins and drugs, in a single step under physiological pH.     

Mild, powerful, and robust methods for esterification, amide formation, and thioesterification between acid chlorides and alcohols, amines, thiols, respectively

We developed two efficient practical methods for esterification, amide formation, and thioesterification between acid chlorides and alcohols, amines, thiols, respectively. The present mild and robust reaction was performed by two separate methods both by combining cheap and readily available amines, N-methylimidazole, and N,N,N′,N′-tetramethylethylenediamine (TMEDA). Method A uses catalytic N-methylimidazole and TMEDA with an equimolar amount of K₂CO₃, whereas Method B uses equimolar amounts of N-methylimidazole and TMEDA. The salient features are as follows. (i) With regard to reactivity, Method B was superior to Method A for esterification and thioesterification, whereas cost-effective Method A was superior to Method B for amide formation. (ii) Amide formation proceeded smoothly between acid chlorides and less nucleophilic and stereocongested amines such as 2,6-dichloroaniline. (iii) This protocol was applied to the successful synthesis of two agrochemicals, bromobutide and carpropamid.     

Structural, magnetic, and spectroscopic studies of YAgSn, TmAgSn, and LuAgSn

The rare earth-silver-stannides YAgSn, TmAgSn, and LuAgSn were synthesized from the elements by arc-melting and subsequent annealing. The three stannides were investigated by X-ray powder and single-crystal diffraction: NdPtSb type, P6₃mc, Z=2, a=468.3(1), pm, wR₂=0.0343, 353 F² values, 12 variables for YAgSn, and ZrNiAl type, P6¯2 m, a=726.4(2), , wR₂=0.0399, 659 F² values, 15 variables for TmAgSn, and a=723.8(2), , wR₂=0.0674, 364 F² values, 15 variables for LuAgSn. Besides conventional laboratory X-ray data with monochromatized Mo radiation, the structures were also refined on the basis of synchrotron data with , in order to clarify the silver-tin ordering more precisely. YAgSn has puckered, two-dimensional [AgSn] networks with Ag-Sn distances of 278 pm, while the [AgSn] networks of TmAgSn and LuAgSn are three-dimensional with Ag-Sn distances of 279 and 284 pm for LuAgSn. Susceptibility measurements indicate Pauli paramagnetism for YAgSn and LuAgSn. TmAgSn is a Curie-Weiss paramagnet with an experimental magnetic moment of 7.2 μ_B/Tm. No magnetic ordering is evident down to 2 K. The local environments of the tin sites in these compounds were characterized by ¹¹⁹Sn Mössbauer spectroscopy and solid-state NMR (in YAgSn and LuAgSn), confirming the tin site multiplicities proposed from the structure solutions and the absence of Sn/Ag site disordering. Mössbauer quadrupolar splittings were found in good agreement with calculated electric field gradients predicted quantum chemically by the WIEN2k code. Furthermore, an excellent correlation was found between experimental ¹¹⁹Sn nuclear magnetic shielding anisotropies (determined via MAS-NMR) and calculated electric field gradients. Electronic structure calculations predict metallic properties with strong Ag-Sn bonds and also significant Ag-Ag bonding in LuAgSn.     

Pyrenes,Peropyrenes, and Teropyrenes: Synthesis,Structures, and Photophysical Properties

The design of a relatively simple and efficient method to extend the π‐conjugation of readily available aromatics in one‐dimension is of significant value. In this paper, pyrenes, peropyrenes, and teropyrenes were synthesized through a double or quadruple benzannulation reaction of alkynes promoted by Brønsted acid. This novel method does not involve cyclodehydrogenation (oxidative aryl–aryl coupling) to arrive at the newly incorporated large arene moieties. All of the target compounds were synthesized in moderate to good yields and were fully characterized with the structures unambiguously confirmed by X‐ray crystallography. As expected, photophysical characterization clearly shows increasing red‐shifts as a function of extended conjugation within the fused ring systems.     

Pyrenes,Peropyrenes, and Teropyrenes: Synthesis,Structures, and Photophysical Properties

The design of a relatively simple and efficient method to extend the π‐conjugation of readily available aromatics in one‐dimension is of significant value. In this paper, pyrenes, peropyrenes, and teropyrenes were synthesized through a double or quadruple benzannulation reaction of alkynes promoted by Brønsted acid. This novel method does not involve cyclodehydrogenation (oxidative aryl–aryl coupling) to arrive at the newly incorporated large arene moieties. All of the target compounds were synthesized in moderate to good yields and were fully characterized with the structures unambiguously confirmed by X‐ray crystallography. As expected, photophysical characterization clearly shows increasing red‐shifts as a function of extended conjugation within the fused ring systems.