Preliminary results of a quick,simple method of detecting antimony in water samples

Preliminary results of development of a direct and fast method of determination of antimony in samples of tap water using GFAAS are presented. The found levels of antimony were lower than permitted for human consumption. A mixture of Pd and Mg(NO₃)₂ (concentrations in the injected solution: 8.6 μg mL⁻¹ and 5.8 μg mL⁻¹ respectively) was used as the chemical modifier. The pyrolysis and atomization temperatures were 1000 and 1700°C, respectively and the mean analytical recovery 98.2%.      

Ionic liquid promoted Diels-Alder Reaction between anthrone and maleimides

Ionic liquids (IL) are gaining importance as green solvents. Imidazolium ionic liquid [bmim]⁺[Cl]⁻, an environmentally benign solvent, was found to promote the Diels-Alder reaction between anthrone and maleimides at room temperature with excellent yields. The ionic liquid played a dual role as solvent and catalyst.      

Determination of phenolic acids by capillary zone electrophoresis and HPLC

Selected phenolic acids are determined by capillary zone electrophoresis and HPLC, each using UV detection. The optimised CZE background electrolyte contained 50 mM acetic acid, 95 mM 6-aminocaproic acid, 0.1% polyacrylamide, 1% polyvinylpyrrolidone, and 10% methanol. Twelve phenolic acids (gallic, p-hydroxybenzoic, 3,4-dihydroxybenzoic, vanillic, syringic, o-coumaric, p-coumaric, caffeic, sinapic, ferulic, salicylic and chlorogenic) were separated within 10 minutes. Chromatographic separation of these phenolic acids was carried out on an Eclipse XBD C8 column using a mobile phase gradient (acetonitrile / methanol / water / 0.1% phosphoric acid); all were separated within 25 minutes. Electrophoretic and chromatographic determinations of ferulic and chlorogenic acids were compared on barley, malt, and potato samples. The methods’ characteristics were: linearity (1–20 mg ml and 0.2–4 mg ml⁻¹), accuracy (recovery 94 ± 5% and 96 ± 4%), intra-assay repeatability (4.1% and 3.5%), and detection limit (0.2 and 0.02 mg ml⁻¹).      

Properties of naproxen ion-selective electrodes

Naproxen membrane electrodes based on different plasticizers and the quaternary ammonium salts (QASs) dimethyldidecylammonium bromide, methyltrioctylammonium chloride, or tetraoctylammonium chloride, were prepared. The following basic parameters were investigated for the optimal electrode: measurement range (10⁻⁴ − 10⁻¹ mol L⁻¹), slope of the linear range of the calibration curve (−58.3 mV decade⁻¹), limit of detection (6.0 × 10⁻⁵ mol L⁻¹), lifetime (2.5 months), dependence of the electrode potential on pH (5.5 − 9.0), reproducibility of potential (1.2 mV) and selectivity coefficients in relation to selected organic and inorganic anions. The electrode was utilized for determination of naproxen in tablets by the calibration curve method and the standard addition method.      

Pyrrole thin films deposited on paper by pulsed RF plasma

Attempts were made to plasma deposit an oriented π-conjugated polymer of pyrrole (Py) on paper surfaces in order to produce electrically conductive layers. The N/C atomic ratio of 0.13–0.24 was observed for all treatment conditions. This implies the nature of the deposition formed on the paper surface via pulsed plasma is different from that of pyrrole monomer. An increase in conductivity of all pyrrole-plasma treated papers was observed. The 50 W RF-power with 5 min plasma exposed paper sample shows 8.15 × 10⁻⁹ S·cm⁻¹ conductivity. The conductivity measurements indicated a plasma-enhanced ring-opening reaction mechanism of pyrrole.      

Determination of penicillin V potassium in pharmaceuticals and spiked human urine by chemiluminescence

A simple and selective method for penicillin V potassium (PVK) determination by chemiluminescence (CL) was developed. Oxidation of PVK by alkaline hydrogen peroxide produces CL, which is greatly enhanced by N, N-dimethyl formamide (DMF) and N-cetyl-N,N,N-trimethylammonium bromide (CTMAB). Optimum conditions were established using luminometry. There is a linear relationship between the chemiluminescent peak height and the amount of PVK within the range 0.5–129.5 mg L⁻¹, with a detection limit of 0.2 mg L⁻¹. The coefficient of variation was 1.2% for 40 mg L⁻¹ PVK solution (n = 7). The method is very simple, has high sensitivity and good selectivity, and is usable for process control. It was successfully utilized for the determination of PVK in pharmaceuticals and spiked human urine.      

Spatial trends of petroleum hydrocarbons in water and sediments

Seasonal changes in petroleum hydrocarbons in water and streambed sediment from selected oil-related areas of Ondo State, Nigeria have been examined using gravimetric and infrared methods. The highest and lowest total petroleum hydrocarbon concentrations (TPH) in water (sediments in brackets) gravimetrically were 3.49 mg L⁻¹ (199.3) mg kg⁻¹ and 0.003 mg L⁻¹ (81.0) mg kg⁻¹ while the concentrations found by IR were 24.0 mg L⁻¹ (135.0 mg kg⁻¹) and 14.0 mg L⁻¹ (33.0 mg kg⁻¹) respectively. The two seasons were positively correlated (α = 0.01) by both methods. The TPH level was well correlated with the sediment organic carbon (OC) during both seasons. The characteristic carbonyl (C=O) vibrations at 1650 cm⁻¹ and 1700 cm⁻¹ indicate oxidation of the oil residue. The study recommends further investigation into the type of organics present to evaluate their toxicity and appropriate remediation.      

Sol-gel preparation and characterization of non-substituted and Sr-substituted lanthanum cobaltates

This paper reports on the results concerning the sol-gel preparation and characterization of Sr-substituted perovskite lanthanum cobaltates La_1−xSr_xCoO_3−δ (x = 0.0, 0.25, 0.5 and 0.75). The metal ions, generated by dissolving starting materials in diluted acetic acid were complexed by 1,2-ethanediol to obtain the precursors for the non-substituted and Sr-substituted LaCoO₃. The influence of the synthesis temperature, heating time and the amount of substituent on the phase purity of La_1−xSr_xCoO_3−δ were investigated. The phase transformations, composition and micro-structural features in the gels and polycrystalline samples were studied by thermal analysis (TG/DTA), infrared spectroscopy (IR), powder X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM).      

Preparation and characterization of alumina-zirconia composite material with different acid ratios by the sol-gel method

Alumina-zirconia composite materials were produced with different acid ratios by the sol-gel method using aluminum isopropoxide and zirconium chloride. The composites were produced by changing acid/alkoxside ratio in alumina. The composite materials were calcinated at 600°C, 900°C and 1300°C. The effects of acid concentration and calcination temperature on the surface area and pore radius were determined from the nitrogen adsorption isotherm at 77 K. The density of the composites was also measured. The minimum density of produced material was recorded as 1.35 g cm⁻³ at an acid/alkoxside ratio of 0.2. The highest specific surface area and pore diameter of the lightest material are 191.86 m² g⁻¹ and 18.4 Ǻ, respectively. Although pore diameter and specific surface area are not changed at any of the experimental temperatures which were tested by decreasing acid/alkoxside ratio, the density is slightly increased. However, it was observed that the calcination temperature significantly affects the surface area and density of the material.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Ugi products containing boronate esters

The Ugi reaction with formylphenylboronic acid derivatives as the carbonyl component proceeds to give the corresponding boron-containing dipeptide derivatives (Ugi products) in good yields.      

Dispersive liquid-liquid microextraction and liquid chromatographic determination of pentachlorophenol in water

A simple and sensitive dispersive liquid-liquid microextraction method for extraction and preconcentration of pentachlorophenol (PCP) in water samples is presented. After adjusting the sample pH to 3, extraction was performed in the presence of 1% W/V sodium chloride by injecting 1 mL acetone as disperser solvent containing 15 μL tetrachloroethylene as extraction solvent. The proposed DLLME method was followed by HPLC-DAD for determination of PCP. It has good linearity (0.994) with wide linear dynamic range (0.1–1000 μg L⁻¹) and low detection limit (0.03 μg L⁻¹), which makes it suitable for determination of PCP in water samples.      

Hollow fibre liquid phase microextraction of parabens

A hollow fibre liquid phase microextraction for gas chromatographic determination of some p-hydroxybenzoic acid esters has been developed. Chlorobenzene containing tetradecane as internal standard was used for the extraction. Optimized extraction was carried out at room temperature for 40 min in the presence of 0.4 g mL⁻¹ NaCl in the sample solution. Calibration was linear up to 30 mg L⁻¹. Correlation coefficients were 0.996–0.998. Enrichment factors were 21, 95 and 154, and detection limits were 0.20, 0.03 and 0.01 μg mL⁻¹ for methylparaben, ethylparaben and propylparaben, respectively. Reproducibility was acceptable with relative standard deviations up to 11.7%. The technique was tested for water and urine analysis.      

Determination of diclofenac in pharmaceuticals and urine samples using a membrane sensor based on the ion associate of diclofenac with Rhodamine B

The potentiometric response characteristics of a diclofenac selective electrode, based on ion association in different plasticizers, were compared. The sensitivity, working range, detection limit and selectivity of membrane sensors demonstrated significant dependence on the type of plasticizers. The potentiometric unit presented a linear response toward diclofenac concentrations between 1 × 10⁻⁵ − 5 × 10⁻² mol L⁻¹, with slopes of approximately 60 mV dec⁻¹, and exhibited a response time of 3 s. The potentiometric analysis of sodium diclofenac in pharmaceutical formulations was perfomed by the membrane electrode proposed and compared with the results of potentiometric titration given by the Pharmacopoeia of Ukraine.      

Density functional theory study of the photosensitization mechanisms of indigo

The triplet excited state properties and photosensitization mechanisms of indigo were investigated based on density functional theory calculations. The solvent effects on the photosensitization mechanisms of indigo have also been considered. The thermodynamic feasibility of the possible ¹O₂ and O₂·⁻-photogeneration pathways by triplet excited state indigo in different solvents was explored, in order to gain some deeper insights into the photosensitization characters of the dye.      

Solid-state linear polarized IR-spectroscopy of croconic and rhodizonic acids

The applications of linear-polarized IR-spectroscopy to oriented colloid suspensions in a nematic host are demonstrated with croconic and rhodizonic acids. The experimental IR vibrational assignments of the solid-state of both neutral compounds are presented. Assignments are supported by theoretical quantum chemical calculations and vibrational analysis at the DFT level of theoretical approximation with the 6-311++G^** basis set.      

Influence of EDTA,carboxylic acids,amino- and hydroxocarboxylic acids and monosaccharides on the generation of arsines in hydride generation atomic absorption spectrometry

The influence of EDTA, carboxylic acids, amino-and hydroxocarboxylic acids, monosaccharides and humic substances on the generation of arsines in hydride generation atomic absorption spectrometry (HGAAS) was investigated. EDTA (0.02 mol L⁻¹), ascorbic acid (0.02 mol L⁻¹) and glucose or fructose (0.2 mol L⁻¹) are useful additives for levelling sensitivities for As(III), monomethylarsonate (MMA) and dimethylarsinate (DMA). The presence of glycine, malonic, tartaric acids, BICIN and soil humin extracts leads to differences in analytical signal response between these arsenic species. An analytical application to the determination of the sum of As(III), monomethylarsonate (MMA) and dimethylarsinate (DMA) as well as the sum of toxicologically relevant hydride forming arsenic fraction As(III) + As(V) + MMA + DMA in EDTA soil/sediment extracts using continuous flow HGAAS was demonstrated. The limit of detection was 0.2 mg kg⁻¹ As. Within-day and between-day precision were in the range 3–7% and 4–10%, respectively, for arsenic contents of 0.7–25 mg kg⁻¹, with recoveries 95–103%.      

Meldola’s Blue — doped titania sol-gel sensor for NADH determination

Titania layers obtained by a sol-gel technique doped with redox mediator, Meldola’s Blue, were employed for construction of a new NADH senor. Optimization of preparation process as well as experimental conditions affecting the response of the sensor were examined. Under optimal conditions NADH could be determined in the wide linear range from 90 to 2300 μM with detection limit 12 μM and a high sensitivity 12.5 nA μM⁻¹. The usefulness of developed sensor was preliminarily checked in determination of NADH forming during enzymatic oxidation of ethanol catalyzed by alcohol dehydrogenase (ADH).      

Determination of submillimolar concentration of ferrate(VI) in alkaline solutions by amperometric titration

A new amperometric titration method was developed for quantitative determination of ferrate(VI) (Fe^VIO₄ ²⁻) in the 7.06×10⁻⁵−5.73×10⁻³ M concentration range. Chromium(III) hydroxide solution was used as the titrant. The diffusion current (Id) had a linear relationship with the concentration of ferrate(VI) and slopes were dependent on the concentration of NaOH. The amperometric titration could detect a lower concentration of ferrate(VI) than could potentiometric and colorimetric titrations. The method was applied successfully to determine concentrations of ferrate(VI), generated electrochemically, in strong alkaline solutions.      

Diironcarbonyl-coumarin complex: preparation, intramolecular electron transfer, and electro-generation of hydrogen

A new organometallic complex coupling photoactive coumarin to a diironhexacarbonyl unit has been successfully prepared and its composition and electronic structure confirmed by elemental and spectroscopic analyses. Emission spectral analysis of the complex reveals photoinduced intramolecular electron transfer from coumarin to the iron-carbonyl moiety. The compound is electrochemically reduced at −1.24 V vs. Fc/Fc⁺. This reduction is irreversible, attesting to the instability of the complex. Electrochemical evolution of hydrogen in the presence of the complex has been studied and results are discussed.