Vibrational spectra and density functional study of propylgermane

Raman and infrared spectra of propylgermane, CH₃CH₂CH₂GeH₃, and its Ge-deuterated analog, CH₃CH₂CH₂GeD₃, were investigated in their gaseous, liquid and solid states. The normal coordinate treatment was carried out by density functional theory (DFT) calculation, using B3LYP/6-31G^* and 6-311++G^** basis sets, and the corresponding fundamental vibrations were assigned. The trans (T) and gauche (G) forms around the central C–C bond coexisted in the gaseous and liquid states and only the T form existed in the solid state. From the temperature dependent measurements of the Raman spectra in the liquid state, the enthalpy difference was found to be ΔH(T−G)=−0.36±0.02 kcalmol⁻¹ with the T form being more stable. The energy differences between the isomers obtained by DFT calculations were ΔE(T−G)=−0.46 kcalmol⁻¹ and ΔE(T−G)=−0.87 kcalmol⁻¹ by the 6-31G^* basis set and 6-311++G^** basis set, respectively.     

Analysis of vibrational spectra of 2 and 3-methylpiperidine based on density functional theory calculations

The experimental and theoretical vibrational spectra of 2 and 3-methylpiperidine (abbreviated as 2-MP and 3-MP) were studied. The FT-Infrared spectra of 2-MP and 3-MP molecules were recorded in the liquid phase. The structural and spectroscopic analysis of the title molecules were made by using density functional harmonic calculations. For the title molecules, only one form was found most stable structure by using B3LYP level with the 6-311G (d,p) basis set. Selected experimental bands were assigned and characterized based on the scaled theoretical wave numbers by their total energy distribution (TED).     

三聚氰胺结构和热力学性质的密度泛函理论研究

采用Materials Studio 软件中的DMol~3模块对三聚氰胺的结构和性质进行了理论研究.得到了分子的几何构型、振动频率、各原子上的电荷分布、热力学、以及Fukui指数和前线分子轨道.计算结果表明:三聚氰胺分子中的C原子易得电子,是亲核试剂进攻点,而胺基上的N原子因含孤对电子是亲电反应中心.     

Vibrational analysis of small species in the liquid phase by a combined density functional theory and polarizable continuum method

The vibrational frequencies of small organic molecules and inorganic ions were predicted both in vacuum and in the liquid phase at the B3LYP/6-311G++(d,p) level of theory, within the harmonic approximation. The solvent effect was introduced as an electrostatic influence of the bulk by means of the integral equation formalism of the polarizable continuum model. The results show that the application of this continuum solvation model can reduce the overall error in the theoretical predictions. In order to improve the quality of the results, two different scaling procedures were applied. The frequencies obtained for the continuum, when compared with vacuum calculations, show a better linear correlation with experimental data, which increases the efficiency of the scaling procedures. A further reduction of the errors is obtained by partitioning the overall set of frequencies according to the nature of the normal modes and the charge of the solutes. The quality of the theoretical predictions, especially for the stretching modes of vibration of nonionic chemical species, is here noteworthy.     

Theoretical investigation of the molecular, electronic structures and vibrational spectra of a series of first transition metal phthalocyanines

A theoretical investigation of the fully optimized geometries and electronic structures of metallophthalocyanines FePc, CoPc, NiPc, CuPc and ZnPc has been conducted with the density functional theory (DFT) method. A comparison between the different molecules for the geometry, molecular orbital, and atomic charge is made. The simulated order of the sizes of the central hole is FePc>CoPc>NiPcNiPc>CuPc>ZnPc, and the atomic charges of the central metal (M=Fe, Co, Ni, Cu, Zn) ions vary in the same order, FePc>CoPc>NiPcCoPc>FePc>CuPc>ZnPc, and the corresponding peaks predicted at 894, 896, 898, 882 and 871 cm(-1), respectively, also exhibit the same order as above-mentioned. Moreover, the lines of fit through plots of the experimental IR and Ra frequencies versus the calculated ones show very good correlations.     

Vibrational frequencies of hydrazoic acid and methyl azide: density functional theory study

Harmonic vibrational frequencies of HN3 and CH3N3 molecules and their several isotopomers are calculated using HF, MP2 and five popular density functional theory (DFT) methods. On the basis of the comparison between calculated and experimental results, assignments of fundamental vibrational modes arc examined. HF and MP2 results are in bad agreement with experimental values. Of the five DFT methods, BLYP reproduces the observed fundamental frequencies the most satisfactorily. Two hybrid DFT methods are found to yield frequencies generally higher than the observed fundamental frequencies. The results indicate that BLYP calculation is a very promising approach for understanding the observed spectral features.     

Time-dependent density functional theory calculations of the photoabsorption of fluorinated alkanes

Time-dependent density functional theory (TD-DFT) calculations of the transition energies and oscillator strengths of fluorinated alkanes have been performed. The TD-DFT method with the non-local B3LYP potential yields transition energies for the methanes, which are smaller by about 10% as compared to the experimental values. An empirical linear correlation was found between the calculated and experimental transition energies both at the B3LYP/DZ+Ryd(C, F) and B3LYP/cc-pVTZ+Ryd(C, F, H) levels for a total of 19 transitions of the fluorinated methanes with linear correlation coefficients of 0.987 for the former and 0.988 for the latter. This empirical correlation for fluorinated methane molecules is found to agree well with the previously obtained empirical correlations between calculated and experimental values for non-fluorinated molecules. The results show that a single empirical-correlation relationship can be used for both non-fluorinated and fluorinated molecules to predict transition energies. This linear relationship is then used to predict the photoabsorption spectra of ethane, propane, butane, and partially and fully fluorinated derivatives. A key result of these calculations is the dominance of Rydberg transitions in the spectral region of interest.     

Ab initio and density functional theory calculations of molecular structure and vibrational spectrum of ethyl azidoacetate

Here we report ab initio and density functional results for molecular properties of ethyl azidoacetate (N₃CH₂COOC₂H₅) and for the corresponding singly ionized structure (N₃CH₂COOC₂H₅⁺). Ab initio ionization energies based on Koopmans’ theorem are in excellent agreement with the experimental data from ultraviolet photoelectron spectroscopy. DFT adiabatic energy differences between neutral and ionized structures are very sensitive to electronic correlation effects and are not in very good agreement with experiment. The results for the structure and vibrational frequencies are compared with the experimental data of related molecular structures.     

Density functional theory study of the FT-IR spectra of phthalimide and N-bromophthalimide

Fourier transform infrared (FT-IR) spectra of phthalimide and N-bromophthalimide have been recorded in the range of 4000-400 cm-1. With the hope of providing more and effective information on the fundamental vibrations, a normal coordinate analysis has been performed on phthalimide and N-bromophthalimide, by assuming C2v symmetry. Density functional theory (DFT)-Beck3-Lee-Yang-Parr (B3LYP) levels with 6-31G* and 6-311+G** basis sets have been employed in quantum chemical analysis. The computational frequencies are in good agreement with the observed results. The theoretical spectra obtained along with intensity data agree well with the observed spectra.     

Molecular analysis of water clusters: Calculation of the cluster structures and vibrational spectrum using density functional theory

Density functional theory (DFT) is applied to obtain absorption spectra at THz frequencies for molecular clusters of H₂O. The vibrational modes of the clusters are calculated. Coupling among molecular vibrational modes explains their spectral features associated with THz excitation. THz excitation is associated with vibrational frequencies which are here calculated within the DFT approximation of electronic states. This is done for both isolated molecules and collections of molecules in a cluster. The principal result of the paper is that a crystal-like cluster of 38 water molecules together with a continuum solvent background is sufficient to replicate well the experimental vibrational frequencies.     

Vibrational spectra of mixed (phthalocyaninato)(porphyrinato) yttrium(III) double-decker complexes: Density functional theory calculations

The vibrational (IR and Raman) spectra of neutral and reduced mixed (phthalocyaninato)(porphyrinato) yttrium(III) double-decker complexes Y(Pc)(Por) and [Y(Pc)(Por)]⁻ [the simplified models of mixed (phthalocyaninato)(porphyrinato) rare earth(III) complexes] are studied using density functional theory (DFT) calculations. The simulated IR and Raman spectra of Y(Pc)(Por) are compared with the experimental IR spectrum of Tb(Pc)(TClPP) and Raman spectrum of Y(Pc)(TClPP), respectively, and many bands can acceptably fit in spite of the different species. On the basis of comparison with the simulated spectra of PbPc and PbPor together with the assistance of normal coordinate analysis, the calculated frequencies in their IR and Raman spectra are identified in terms of the vibrational mode of different ligand for the first time. The calculated frequency at 1048 cm⁻¹ in the IR spectrum of [Y(Pc)(Por)]⁻ with contribution from both Pc and Por vibrational modes is the characteristic IR vibrational mode of the reduced double-decker, while the characteristic IR vibrational mode of Y(Pc)(Por) attributed from the vibration of phthalocyanine monoanion radical Pc⁻ appears at 1257 cm⁻¹. In line with our previous experimental findings that the Raman spectra of M(Pc)(TPP) and M(Pc)(TClPP) are dominated by the Pc vibrational modes, theoretical calculations indicate that most of the Raman vibrational modes contributed from Por ring are covered up by those of Pc ring and thus are hard to be recognized in the Raman spectra of [Y(Pc)(Por)]⁻ and Y(Pc)(Por) due to their much weaker intensity in comparison with that of Pc ligand. Comparison in the IR and Raman spectra between [Y(Pc)(Por)]⁻ and Y(Pc)(Por) also suggests the localization of hole on the Pc ring in the neutral double-decker Y(Pc)(Por). The present work, representing the first detailed DFT study on the vibrational spectra of mixed (phthalocyaninato)(porphyrinato) rare earth(III) double-decker complexes, is useful in helping to understand the vibrational spectroscopic properties of this series of mixed tetrapyrrole ring complexes.     

Theoretical investigation of nitro derivatives of tetrazole with density functional theory (DFT)

The B3LYP of density function theory (DFT) method was employed to calculate seven nitrotetrazoles. The optimized geometries, IR spectra and thermodynamic properties at 6-31G* level are obtained. Their heats of formation were computed accurately using the designed isodemic and isogyric reactions. The calculated total energies and heats of formation consistently show that C-nitrotetrazoles are more stable than the N-isomers.     

Mechanical properties of diboron-porphyrin sheet under strain: A density functional theory study

The mechanical properties of a new two-dimensional semiconductor material named diboron-porphyrin (DP) are studied based on density functional theory. The behavior of DP monolayer under uniaxial and biaxial loadings as well as shear stress is investigated. The in-plane stiffness, Poisson's ratio, bulk and shear moduli of the DP monolayer are found to be close to those of a graphene sheet. It can be concluded that the DP monolayer has stiffness close to the graphene sheet. The difference in magnitude of in-plane stiffness and Poisson's ratio along x- and y-directions shows slightly anisotropic mechanical properties of DP monolayer. It is also observed that DP monolayers can bear high tensile strains before failure. The high stability and hardly deformable structure of DP monolayer are due to its high planar packing density which is comparable with graphene sheet. The fantastic mechanical properties of DP show these materials are desirable for application in nanomechanical devices.     

An ab initio and density functional theory study of the dimethylzinc-hydrogen selenide adduct: (CH3)2Zn:SeH2

The molecular structure (equilibrium geometry) and binding energy of the dimethylzinc (DMZn)-hydrogen selenide (H₂Se) adduct, (CH₃)₂Zn:SeH₂, have been computed with ab initio molecular orbital and density functional theory (DFT) methods and, where possible, compared with experimental results. The structure of the precursors DMZn and H₂Se are perturbed to only a small extent upon adduct formation. (CH₃)₂Zn:SeH₂ was found to be 3 kcal mol⁻¹ less stable than the precursors at the B3LYP/6-311 + G(2d,p)//B3LYP/6-311 + G(2d,p) level of computation, indicating that the (CH₃)₂Zn:SeH₂ adduct is unlikely to be a stable gas-phase species under chemical vapour deposition conditions. Further calculations at the B3LYP/6-311 + G(2d,p)//B3LYP/6-311 + G(2d,p) level of computation suggest that the 1:2 adduct species, (CH₃)₂Zn:(SeH₂)₂, is much less stable than the 1:1 adduct and consequently the precursors by 19 kcal mol⁻¹.     

Electronic structures of 4d transition metal monoxides by density functional theory

Bond distances, dissociation energies, ionization potentials and electron affinities of 4d transition metal monoxides from YO to CdO and their positive and negative ions were studied by use of density functional methods B3LYP, BLYP, B3PW91, BPW91, B3P86, BP86, SVWN, MPW1PW91 and PBE1PBE. It was found that calculated properties are highly dependent on the functionals employed, especially for dissociation energy. For most neutral species, pure density functionals BLYP, BPW91 and BP86 have good performance in predicting dissociation energy than hybrid density functionals B3LYP, B3PW91 and B3P86. In addition, BLYP gives the largest bond distance compared with other density functional methods, while SVWN gives shortest bond distance, largest dissociation energy and electron affinity. For the ground state, the spin multiplicity of the charged species can be obtained by ± 1 of their corresponding neutral species.     

Prediction of the Raman spectrum of the aqueous formate anion by a combined density functional theory and self-consistent-reaction-field study

Formate, HCOO⁻, is a small ion that can be used as a convenient model to represent general carboxylic acids as well as the terminal side chains of glutamic and aspartic amino acids in biological systems. Several ab initio techniques (Hartree–Fock and density functional theory methods) were used to study the formate anion in aqueous solution, where the solvent was treated as an electrostatic influence by means of a self-consistent-reaction-field (SCRF) method. The comparison of calculated frequencies with Raman experimental data constitutes a good test for the solvation model employed in this work. The results showed that the application of a SCRF method not only produced smaller errors but also improved the linear correlation between predicted and experimental values. This latter characteristic enables a more efficient application of a linear scaling factor, λ, which corrects the calculated frequencies. In fact, the application of λ to the values calculated for the continuum, when compared to those obtained for a vacuum, resulted in smaller root-mean-square errors of the deviations from the experimental data. Received: 15 May 2000 / Accepted: 19 June 2000 / Published online: 11 September 2000     

The structures and properties of tetrafluoromethane, hexafluoroethane, and octafluoropropane using the AIMPRO density functional program

The AIMPRO density functional program was used to calculate the structures and properties of the three simplest perfluoroalkanes: tetrafluoromethane, hexafluoroethane, and octafluoropropane. The method reproduces both the molecular structures and the vibrational spectra well, and in addition, has identified a new C₂-symmetry ortho-conformer of octafluoropropane that is approximately 0.525 kcal/mol (2.20 kJ/mol) higher in energy than the well-known C_2v-symmetry global minimum staggered-conformer.     

High level of ab initio and density functional theory computational study of structural and energetic properties of tetrafluorhydrazine rotamers

The HF, MP2, MP3, MP4, and QCISD ab initio methods were compared with local, hybrid, and gradient-corrected density functional theory (DFT) methods for computing structures and energies of N2F4 rotamers. In all DFT calculations 6-311 + G(2d) basis set was used. The generated structures energies of trans- and gauche-N₂F₄ rotamers, and their dissociation energies to nitrogen difluoride were compared with experimental data. Suitable hybrid and gradient-corrected DFT methods for determining structures and energies for these and similar molecular systems were discussed.