Photometric determination of trace selenium in aqueous media

A new procedure is developed for the photometric determination of trace selenium in aqueous solutions. The selection of 2-(p-nitrophenyl)-3,5-diphenyltetrazolium chloride as a reagent for selenium is justified. The proposed sample preparation procedure involves gas extraction of selenium as hydrogen selenide followed by its liquid-adsorption extraction from the gas phase to an aqueous reagent solution with the formation of a water-insoluble formazan. Formazan formed upon the absorption of hydrogen selenide is extracted with isoamyl alcohol. The concentration of selenium is determined from the absorbance of the formazan extract in the isoamyl alcohol. The procedure allows the determination of 10–120 μg/L selenium.     

Selective photometric determination of low conentrations of selenium(IV) and selenium(VI) in bottled drinking water

A procedure is developed for the selective photometric determination of selenium(IV) in bottled drinking water by the oxidation of Methylene Blue in 1 M HCl to colorless decomposition products and of selenium(VI) by its interaction with the specified reagent at pH 5–6 with the formation of a colored ion pair. The limits of detection are 1 and 0.8 µg/L, respectively. At the concentration of selenium(IV) 2 µg/L, the admissible weight ratios are: SeO₄^2-, Br₃^- (1: 20); Br^– (1: 60); I^–, IO₃^- and IO₄^- (1: 100). At equal concentration of selenium(VI), the following species: SeO₄^2-(1: 20); Br₃^-, Br^–, I^–, IO₃^-, and IO₄^- (1: 100) do not interfere with the determination. Other anions and cations present in highly mineralized waters do not interfere with the determination. The relative error of determination is 8–10% in the concentration range 2–10 µg/L of selenium(IV) and selenium(VI) and does not exceed 5% in their concentration range of 10–100 µg/L.     

Selective allylation of carbonyl compounds in aqueous media

The use of aqueous neutral media leads to excellent yields of homoallylic alcohols from reaction sof allyl halides with carbonyl compounds in the presence of tin or zinc. The stereochemical course and range of application of this reaction have been investigated.     

Selective photometric redox determination of periodate and iodate ions in bottled drinking water

method has been developed for the selective photometric redox determination of periodate and iodate ions in bottled drinking water based on redox reactions of analytes with Methylene Blue with different duration of processes, products of which form the analytical signal. The limits of detection for periodate and iodate ions are 0.5 and 0.2 µg/L, respectively. The allowable weight ratios for concomitant ions for (at the analyte concentration 2 µg/L) are as follows: I^–, Br^–, IO₃^–, BrO₃^–, ClO^–, CIO^–, CIO₂^–, CIO₃^– and CIO₄^–(1: 100); and for IO₃^– (1 µg/L) are: BrO₃^–₂^–, NO (1: 60), CIO^–, CIO₂^–, (1: 100), and I^–, Br^–, IO₄^–, CIO₃^–, and CIO₄^– (1: 200). The HCIO₃^–, Cl^–, and SO₄^2- anions and Ca²⁺, Mg²⁺, Na⁺, K²⁺, and NH₄⁺ cations are macrocomponents of drinking water and at total concentrations up to 10 g/L do not affect the results of analysis. In the concentration range 1–10 µg/L of IO₄^– andIO₃^–, the total error of determination is 5–7%.     

Simple photometric determination of free cyanide ion in aqueous solution with 2,6-dichlorophenolindophenol

In this work, a simple photometric method with high accuracy and precision for measuring trace amounts of free cyanide ion in aqueous solution is demonstrated. Under the evaluated conditions, we could determine CN⁻ concentration in the range of 5–70 ppm easily. The work is based upon the photometric titration of CN⁻ with Co(II) in the presence of 2,6-dichlorophenolindophenol (DCPIP) at λ_max = 602 nm in aqueous solution. The optimal conditions, such as pH, ionic strength, and concentration of chromopher were evaluated. The interence effect of many other cations and anions studied and the results are given here. The optimized titration was successfully used to determine the concentration of free cyanide ion in aqueous solutions.     

Differential pulse polarographic determination of orthophosphate in aqueous media

The determination of orthophosphate in aqueous media by differential pulse polarography is described. It is based on determination of the molybdenum in 12-phosphomolybdic acid. High sensitivity is achieved by measuring the polarographic wave due to the catalytic reduction of perchlorate or nitrate in the presence of molybdenum(VI). The method is suitable for samples as small as 3.5 ml which contain as little as 9 ng of phosphorus per ml. The average relative deviation is 3.0% at the 0.045 mg/l. phosphorus level and 1.6% at the 1.2 mg/l. level. Results for the analysis of EPA quality-control water and real surface-water samples are reported.     

Quantitative reflectometry-III: determination of protein in aqueous media

The determination of protein in aqueous media by using commercial and laboratory-prepared test-strips has been investigated. Adsorption indicators of the Bromophenol Blue type form the basis of the colour-forming reaction, which is selective for natural protein. The relative precision of reflectance measurements is 1.7-5.7% over the concentration range 0.5-10 mg ml , for bovine serum albumin. The method would be suitable for the rapid determination of protein in urine and other body fluids.     

Selective photometric determination of nickel with photochemically generated anti-2-furaldehyde 2-pyridylhydrazone

Summary Selective Photometric Determination of Nickel with Photochemically Generated Anti-2-Furaldehyde 2-Pyridylhydrazone A sensitive photometric determination of nickel, based on the formation of a coloured chelate with photochemically generatedanti-2-furaldehyde 2-pyridylhydrazone (anti-FAPH), is described. A detection limit of 3 ng/ml, sensitivity of 4 ng/ml and r. s. d. of 0.9% were found. The stoichiometry of the chelate was found to be 31 (LM) when thesyn-anti ratio in the photostationary state was taken into consideration. The influence of reaction variables, the effect of foreign ions, and applications of the technique to nickel determination in environmental fume samples and in aluminium-rich materials are described.     

Sine-wave polarographic determination of zirconium or niobium in aqueous media

The sine-wave polarographic determination of zirconium in aqueous media was investigated using solutions which were 0.55 – 5.5·10^-3M in zirconyl chloride and 1 M in potassium chloride and had been adjusted to pH 2.0 with hydrochloric acid. It was possible to determine zirconium in the concentration range of 0.05 to 0.4 mg per ml. The sine-wave polarographic behavior of zirconium in aqueous solutions in the pH range 2–3 is discussed. The sine-wave polarographic determination of niobium in aqueous media was investigated using concentrated sulfuric acid containing 5 to 0.1 mg of niobium per ml in a supporting electrolyte of citric acid; the determination of niobium was possible down to 0.1 mg of niobium per ml of concentrated sulfuric acid although the D.C. polarographic method was impractical for the determination of less than 0.5 mg of niobium per ml.     

Selective tin and zinc mediated allylations of carbonyl compounds in aqueous media

Aldehydes undergo preferential allylation in the presence of ketones by the tin or zinc mediated method, easily effected in aqueous media.     

Selective determination of orthophosphate and total inorganic phosphates in detergents by flow injection photometric method

A flow injection photometric system was developed for the determination of orthophosphate and total inorganic phosphates in detergents. While orthophosphate was directly determined in the presence of other phosphates by utilizing the kinetic discrimination of flow injection analysis, total inorganic phosphates was analyzed after on-line hydrolysis of polyphosphates in 2.5 mol l(-1) sulfuric acid for 50 s under 145 degrees C. Sodium dodecyl sulfate (SDS) was added to mask the interference of non-ionic surfactants. The detection limits and the sampling rates were 2.5 mg l(-1) P(2)O(5) and 40 h(-1) for total inorganic phosphates, and 1.0 mg l(-1) P(2)O(5) and 80 h(-1) for orthophosphate determination. The proposed method was applied to analyze orthophosphate and total inorganic phosphates in washing powders. The experimental results are in good agreement with those obtained by the Chinese national standard methods.     

Liquid-phase microextraction and gas-chromatographic determination of selenium(IV) in aqueous samples

A liquid-phase microextraction (LPME) method was employed for preconcentration of selenium as piazselenol complex in aqueous samples. The samples reacted with o-phenylenediamine in 0.1?M HCl at 90°C for 15?min, and then LPME was performed. A microdrop of carbon tetrachloride was applied as the extracting solvent. After extraction, the microdrop was introduced directly into the injection port of gas chromatography for analysis. Several important extraction parameters such as the type of organic solvent, sample and organic drop volumes, salt concentration, stirring rate, and exposure time were controlled and optimized. In the proposed LPME, the extraction was achieved by suspending a 3?µL carbon tetrachloride drop from the tip of a microsyringe immersed in 12.5?mL of aqueous solution. Under optimized conditions, a dynamic linear range was obtained in the range of 20–1000?µg?L^?1. The preconcentration factor and the limit of detection of selenium in this method were 91 and 0.9?µg?L^?1, respectively. The optimized procedure was successfully applied to the extraction and determination of selenium in different types of real samples. The relative standard deviations for the spiking levels of 50–100?µg?L^?1 in the real samples were in the range of 3.2–6.1%, and the relative errors were located in the range of ?5.4 to 5%.     

Calorimetric determination of the enthalpy of micelle formation in aqueous media

The enthalpy of micelle formation of ionic surfactants in aqueous solutions with varying concentration of additives (i. e. NaCl. alcohols) was measured by using a very sensitive microcalorimeter. The heats of dilution were measured from concentrations below the c.m.c. to above c.m.c. This enables one to detect the aggregation process around the c.m.c. region, an analysis hitherto not extensively reported in the current literature. The effect of electrolyte addition on micellar enthalpy is discussed, as compared to the addition of short chain alcohols.     

Extractive concentration of halogen-substituted phenols in their gas-chromatographic determination in aqueous media

Method for recovery of chlorophenols from natural and drinking water for their subsequent gas-chromatographic determination was considered. Processes of microliquid extraction of bromo derivatives of chlorophenols and the method for liquid extraction with intermediate concentration of these compounds in an alkaline solution were studied.     

Electrochemical behaviors and determination of melamine in neutral and acid aqueous media

The electrochemical behaviors of melamine (MEL) were studied at paraffin-impregnated graphite electrode in PBS (pH?7.0) and 0.5?M H₂SO₄. Various methods including UV?Cvis thin-layer spectroelectrochemistry, infrared spectra (IR) and electrochemicatry have been performed to investigate the characteristics. In 0.1?M PBS (pH?7.0), MEL loses two electrons to form a dication, which couples head-to-head with a neutral molecule of MEL to form a dimer accompanying the production of azocompound, the dimer plays a role of a monomer in the following polymerization. In 0.5?M H₂SO₄, unstable MEL mostly hydrolyzes to form ammeline, ammelide, s-triazine-2,4,6-trion, and tricyanic acid, respectively; The hydrolysis could be accelerated by electrochemical method; Meanwhile, MEL associates tricyanic acid to give a plane molecule cake by hydrogen bonding. The spectra responses of MEL at 205 and 234?nm are linearly increasing in a same concentration range of 1.0?×?10^?7?C1.0?×?10^?5?M in 0.5?M H₂SO₄ (determination limit, 1?×?10^?8 and 3?×?10^?8 (3??)). The proposed method was successfully applied to the determination of MEL in real sample.     

Photometric cyclic-injection determination of phosphate ions in aqueous media using extraction preconcentration

A procedure for the automated extraction photometric determination of phosphate ions in aqueous media was proposed based on the formation of colored phosphomolybdic heteropoly acid followed by its extraction from the aqueous phase to 1-butanol in the units of a hydraulic facility for cyclic-injection analysis. The procedure ensures a lower limit of the analytical range at a level of 80 μg/L at a sample volume of 10 mL.     

Electrochemical behaviors and determination of melamine in neutral and acid aqueous media

The electrochemical behaviors of melamine (MEL) were studied at paraffin-impregnated graphite electrode in PBS (pH 7.0) and 0.5 M H₂SO₄. Various methods including UV–vis thin-layer spectroelectrochemistry, infrared spectra (IR) and electrochemicatry have been performed to investigate the characteristics. In 0.1 M PBS (pH 7.0), MEL loses two electrons to form a dication, which couples head-to-head with a neutral molecule of MEL to form a dimer accompanying the production of azocompound, the dimer plays a role of a monomer in the following polymerization. In 0.5 M H₂SO₄, unstable MEL mostly hydrolyzes to form ammeline, ammelide, s-triazine-2,4,6-trion, and tricyanic acid, respectively; The hydrolysis could be accelerated by electrochemical method; Meanwhile, MEL associates tricyanic acid to give a plane molecule cake by hydrogen bonding. The spectra responses of MEL at 205 and 234 nm are linearly increasing in a same concentration range of 1.0 × 10⁻⁷–1.0 × 10⁻⁵ M in 0.5 M H₂SO₄ (determination limit, 1 × 10⁻⁸ and 3 × 10⁻⁸ (3σ)). The proposed method was successfully applied to the determination of MEL in real sample.

     

Simultaneous stepwise injection-photometric determination of nitrite and nitrate ions in aqueous media

A procedure for the stepwise injection-photometric determination of nitrite and nitrate ions has been developed. The procedure employs their subsequent determination by the reaction of colored azo compound formation after the reduction of nitrate ions into nitrite ions on a cadmium reducer. The analytical ranges for nitrite and nitrate ions are 2–15 and 5–50 mg/L (sample volume 2 mL, analysis time 14 min).     

Potentiometric method for determination of kinetic characteristics of radical reactions in aqueous media

Kinetic features of the reactions of K₄[Fe(CN)₆] with radicals initiated by water-soluble azo-initiator 2,2′-azobis(2-amidinopropane) dihydrochloride (AAPH) at 37 °C were studied using the potentiometric method. Potassium ferrocyanide was shown to be a radical acceptor, whereas K₃[Fe(CN)₆] formed by the oxidation with the radicals in combination with K₄[Fe(CN)₆] is an electrochemical system, the study of which makes it possible to determine kinetic characteristics of radical reactions. The rate constants for the reactions of peroxide radicals RO₂ · with K₄[Fe(CN)₆] were calculated.