超支化聚氨酯阻尼涂层的制备及性能

以甲苯-2,4-二异氰酸酯(TDI)和二乙醇胺(DEOA)为原料, 采用一步法合成了超支化聚氨酯, 并对其改性制备了光固化超支化聚氨酯(UV-HPU)和超支化杂化聚氨酯(HHPU)两种树脂. 用傅里叶红外光谱(FTIR)和核磁共振氢谱(1H NMR)表征了预期产物. 以其为预聚物制备阻尼涂层, 动态力学分析(DMA)研究表明, 这两种涂层都具有高阻尼因子(tanδ≥1.0)、宽阻尼温度范围(tanδ≥0.5, 大于50 ℃)和宽阻尼频率范围(20～160 Hz); 通过基本性能测试和热重分析(TGA)发现杂化涂层聚氨酯较光固化聚氨酯具有更好的机械性能和热稳定性能; 杂化涂层聚氨酯的FTIR分析可知杂化涂层中硅氧烷水解缩合, 提高了交联密度; 杂化材料的断面扫描电镜(SEM)分析表明, 硅氧烷的水解缩合并未形成大颗粒纳米粒子而是形成均相体系.     

PCDL型超支化水性聚氨酯的合成与性能

以甲苯-2,4-二异氰酸酯（TDI）、聚碳酸酯二醇（PCDL）、二羟甲基丙酸（DMPA）和二乙醇胺（DEOA）为原料,采用A₂＋bB₂共聚合路线合成了具有超支化结构的水性聚氨酯（HBAPU）乳液。采用红外光谱（FT-IR）、核磁共振（13C NMR）对产物结构进行了表征,证实了超支化聚氨酯的支化度随 n(NCO)/n(OH)比值的增大而增大。用PCS、TG、电子拉力机对产物的性能进行了测试,同时也对胶膜的耐水性进行了测试,发现在DMPA含量为0.4 mmol/g时,HBAPU的粒径仅有20.57 nm,而线性水性聚氨酯粒径有130.91 nm,并且HBAPU具有良好的耐水性、热稳定性和较高的拉伸强度。     

含芳杂环的超支化聚合物的合成与性能研究

在紫外光照射的条件下,以CpCo(CO)2为催化剂,通过3,5-双-(4-炔苯基)-4-苯基-1,2,4-三唑和2,5-双-(4-炔苯基)-1,3,4-(噁)二唑的双炔分别与1-辛炔的[2 2 2]环三聚反应,合成了一类含芳杂环的可溶于普通有机溶剂的新型超支化聚合物.采用红外光谱、核磁共振谱、热失重分析、紫外吸收光谱、荧光光谱、循环伏安法等方法对聚合物进行结构表征和性能测试.结果表明,聚合物具有优异的热稳定性,尤其是含三唑的聚合物热失重5%的分解温度在450℃以上;在800℃时,残余碳化率高达75%.在光激发的条件下,这类聚合物在二氯甲烷溶液中发射深蓝光,其荧光量子效率可达80%.电化学测试结果表明,这类含芳杂环聚合物具有较好的电子传输能力.     

电活性超支化聚合物的合成与性质

通过分子设计, 利用A2+B3反应合成了一种新型电活性超支化聚合物材料. 该材料在保持聚苯胺的电活性基础上, 还具有超支化聚合物特有的低黏度(其特性黏度为0.33 dL/g)、低结晶性及良好的溶解性. 利用紫外-可见光谱对聚合物的氧化过程进行了监测. 热失重分析显示, 该材料具有较好的热稳定性, 失重10%时的温度高达517 ℃. 该材料具有较高的介电常数, 有望成为一种具有实际应用价值的高介电材料.     

聚倍半硅氧烷复合超支化聚酯的结构及相容性

以三羟甲基丙烷(TMP)为内核, 二羟甲基丙酸(DMP)为支化单元用准一步法合成了重均分子量为12100的第四代端羟基脂肪族超支化聚酯G4, 并与聚甲基三乙氧基硅烷(PMSQ)共混制备出一系列不同质量分数的复合物. 利用固体核磁共振(NMR)等方法表征了各个样品的结构和反应程度, 并通过测量¹H T_1ρ值发现超支化聚酯与聚倍半硅氧烷之间具有较好的相容性, 相容尺寸为3~5 nm.     

超支化高分子结构和聚集态研究的新进展

超支化高分子上具有大量的活性末端基,对这些末端基的修饰和功能化会使其聚集态结构发生变化.文中针对超支化高分子所具有的独特结构和性能特点,概述了超支化高分子的构象结构和聚集态结构的研究现状,系统讨论了超支化高分子的支化度、分子量分布、空间尺度、玻璃化转变温度和特性粘度等分子结构参数,并在此基础上介绍了超支化高分子的物理化学性质和分析表征方法,同时综述了国内外学者在该领域的贡献,展望了该领域的研究进程和发展前景.     

Temperature Dependence of the Hydrodynamic and Conformational Properties of Hyperbranched Polycarbosilanes

Three types of carbosilane hyperbranched polymers were studied in dilute solution in toluene. The samples had different lengths of chains between branch points and the structure of terminal groups (butyl, undecenyl, or fluorine containing). The temperature dependences of intrinsic viscosity and second virial coefficient values were determined by viscometry and static light scattering methods. It is shown that conformational characteristics of hyperbranched polycarbosilanes do not depend on the thermodynamic quality of a solution in the wide range of temperatures.     

基于超支化聚合物两性水凝胶的制备及性能

通过N-丙烯酰-1,2-乙二胺盐酸盐(ADE)的Michael加成反应制备阳离子超支化低聚物聚N-丙烯酰-1,2-乙二胺盐酸盐(HADE),以HADE为大分子单体,以丙烯酰胺(AAm)和丙烯酸(AAc)为单体,在无需外加有机交联剂的条件下制备具有高机械强度的两性聚电解质水凝胶(HAH凝胶).结果表明,HAH凝胶可以被压缩超过99%的形变而不断裂,压缩强度高达61.2 MPa;HAH凝胶的断裂伸长率和断裂强度分别达到1700%和70.2 k Pa.由于HADE末端伯胺基与强氧化引发剂通过氧化还原反应生成胺自由基和自身结构中的双键同时参与聚合反应,因而为凝胶网络形成提供了必要的化学交联作用.同时HADE结构中胺基正电荷与AAc的羧基负电荷之间的离子交联也为凝胶网络提供了物理交联作用.2种交联作用的协同作用是HAH凝胶具有良好机械性能的根本原因.     

Prediction of the Physical Properties for the Ionic Liquid Based on Topological Index

1 INTRODUCTION As a new generation of solvent and catalyst, ionic liquid has captured intensive attention in the field of green chemistry[1, 2]. The most significant physical character is that its property can be changed with different choices of anions, cations and substituents. For example, the water solubility can be altered by choosing proper substituent on cation, and decreased by increasing the length of alkyl chain. On the other hand, critical change of its physical properties can …     

基于超支化聚合物制备单分子纳米胶囊及对其包裹客体能力的研究

采用十六酰氯将商品超支化聚甘油醇部分酯化,再将残留的羟基转化为丙烯酸酯或甲基丙烯酸酯基,得到了两亲性超支化聚合物。通过1H NMR求得羟基的酯化度和所得两亲性超支化聚合物的数均分子量。此聚合物作为反相胶束型的单分子纳米胶囊,可用来包裹亲水性染料。用紫外光谱评价了纳米胶囊对染料的包裹能力。结果表明,与不含功能基的单分子纳米胶囊相比,带有少量丙烯酸酯基的纳米胶囊可以包裹更多的亲水性染料,且含丙烯酸酯基比含甲基丙烯酸酯基的纳米胶囊包裹效果更明显。     

纳米离子材料中离子相互作用与流变性能调控

制备了2种离子相互作用强度不同的纳米离子材料(相对强度SiO_2-SIT-M2070SiO_2-SIT-Ethomeen).结果表明,分散相SiO_2在纳米离子材料中稳定存在,未出现聚集.纳米离子材料中外层低聚物的结晶受到抑制,且离子相互作用越强,结晶抑制作用越明显,对动态流变性质也有显著影响.在相同固含量条件下,纳米离子材料SiO_2-SIT-Ethomeen的动态剪切模量和黏度比SiO_2-SIT-M2070小1~3个数量级.在动态大应变剪切条件下,高固含量的SiO_2-SIT-M2070表现出软玻璃流变学特性;而SiO_2-SIT-Ethomeen体系表现出强应变过冲现象,并且随着固含量的升高,其动态模量和黏度出现极大值时所对应的应变值逐渐减小,而且应变过冲的程度逐渐变小.因此通过调节组分间离子相互作用可有效地调节纳米离子材料的流变特性.     

Synthesis and Characterization of Hyperbranched Polyesters Based on Isophthalic Acid and Trimethylolpropane

Hydroxyl-terminated hyperbranched polyesters (HBPEs) with aromatic/aliphatic structure were synthesized at three different monomer mole ratios (A₂/B₃=1, 0.9, and 0.6, respectively) by melt polycondensation of isophthalic acid and trimethylolpropane via A₂+ B₃ approach. Fourier transform infrared (FTIR) spectroscopy indicated that the expected HBPEs, which showed excellent solubility in a variety of polar solvents such as N, N-dimethyl formamide (DMF), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide (DMSO), and terahydrofuran (THF), were produced without gelation during the polymerization. The weight-average molecular weight of HBPEs ranged from 7014 to 8306 and their inherent viscosities were varied from 0.17 to 0.34 dL/g. The degree of branching of the HBPEs was estimated to be 0.39–0.49 by¹H-NMR and ¹³C-NMR measurement. Their glass transition temperature measured by differential scanning calorimetry (DSC) was between 64 and 86°C. The thermogravimetric analysis (TGA) measurement revealed that HBPEs had ca 8.5% weight-loss at 300°C in N₂.     

新型超支化聚(芴-co-吡啶并[3,2-b]吡嗪)共聚物的合成与发光性能

合成了新型三溴代的含有吡啶并[3,2-b]吡嗪的化合物, 通过Suzuki缩聚反应合成了以吡啶并[3,2-b]吡嗪为核, 以9,9-二辛基芴为枝的超支化共聚物. 该共聚物在甲苯和四氢呋喃等有机溶剂中具有较好的溶解性能. 采用共聚物制备了结构为ITO/PEDOT/polymer/Ca/Al的发光器件, 其中基于共聚物PFPQ-2的器件在电流密度为3.8 mA/cm²时得到蓝光发射, 最大外量子效率为1.29%, 最大亮度为1173 cd/m², 色坐标为(0.16, 0.11).     

以铱配合物为核、3,6-咔唑为枝的超支化电磷光聚合物的合成与发光性能

采用Suzuki缩聚反应制备了以铱配合物为核、3,6-咔唑为枝的超支化电磷光聚合物(PCzIrMppy1和PCzIrMppy3). 超支化聚合物PCzIrMppy3的光致发光量子效率为62%, HOMO能级为-5.22 eV, 接近阳极ITO/PEDOT∶PSS的能级(-5.20 eV), 表明其优异的空穴注入性能. 以PCzIrMppy3聚合物为发光层制备的绿光电磷光电致发光器件ITO/PEDOT∶PSS/Emissive layer/CsF/Al的最大电流效率为10.4 cd/A, 最大亮度为34758 cd/m². 此外, 器件的效率随电流密度的衰减较慢, 说明这种超支化结构可有效减少高电流密度下的浓度猝灭.     

Bioactive Hydrogel Layers on Microdisk Electrode Arrays: Cyclic Voltammetry Experiments and Simulations

Poly(hydroxyethylmethacrylate)‐based hydrogel membranes were applied to microfabricated, microdisk electrode arrays (MDEAs) of 50 μm (5184 disks), 100 μm (1296 disks) and 250 μm (207 disks) (d/r=4; A= 0.1 cm²) and studied by cyclic voltammetry (CV) in 1.0 mM ferrocene monocarboxylic acid (FcCO₂H). The membrane produced an order of magnitude decrease in current densities and a shift to quasi reversibility due to a decrease in the D_appt of FcCO₂H, from 4.51×10^?6 cm² s^?1 to 1.42×10^?8 cm² s^?1, (2.18×10^?8 cm² s^?1 from release experiments). The MDEA050 (comprising 50 μm disks) maintained its enhanced current density attributes confirming its value as an effective electrode for biosensors. Finite element modeling (FEM) simulations successfully replicated the voltammograms of the MDEAs.     

Preparation and Properties of Hydrogel Microparticles Based on Chitosan

Theoretical and Experimental Chemistry - Positively charged (zeta potential 22-31 mV) hydrogel microparticles based on low and high molecular weight chitosan were synthesized. The effect of the...     

Bioactive Hydrogel Layers on Microdisk Electrode Arrays: Impedimetric Characterization and Equivalent Circuit Modeling

Microfabricated microdisk electrode arrays (MDEAs) of 50 μm (5184 disks), 100 μm (1296 disks) and 250 μm (207 disks) (d/r=4; A= 0.1 cm²) were coated with poly(hydroxyethylmethacrylate)‐based hydrogel membranes and studied by electrochemical impedance spectroscopy (EIS) in 1.0 mM ferrocene monocarboxylic acid (FcCO₂H). Equivalent circuit modeling showed an approximate three‐fold increase in solution resistance, R_sol, and an order of magnitude increase in charge transfer resistance, R_ct, resulting from a reduction in apparent diffusivity of FcCO₂H. Additionally, both resistive parameters decreased while the capacitance (Q) increased with decreasing microdisk diameter; consistent with an increase in effective electroactive area. The hydrogel layer did not compromise enhanced mass transport achieved by the MDEA and thus may be used to advantage in biosensors.     

聚丙烯酸钠水凝胶基材退热贴的制备及其性能

制备了以聚丙烯酸钠为基材的高分子水凝胶退热贴。退热贴的含水率为56%~60%。对钢板和人造革的剥离力分别为26.6 g/cm和14.8 g/cm,粘附力达到日本产退热贴的水平。动物试验证明自制退热贴对内毒素致家兔体温升高有退热作用,使用后2~2.5h的退热效果较明显,5 h后,家兔体温基本恢复正常。初步临床实验也证明自制退热贴具有良好的退热效果,有效时间为4~6 h。