Proton Intercalation/De-intercalation Chemistry in Phenazine-based Anode for Hydronium-ion Batteries

Hydronium-ion batteries have received significant attention owing to the merits of extraordinary sustainability and excellent rate abilities. However, achieving high-performance hydronium-ion batteries remains a challenge due to the inferior properties of anode materials in strong acid electrolyte. Herein, a hydronium-ion battery is constructed which is based on a diquinoxalino [2,3-a:2’,3’-c] phenazine (HATN) anode and a MnO₂@graphite felt cathode in a hybrid acidic electrolyte. The fast kinetics of hydronium-ion insertion/extraction into HATN electrode endows the HATN//MnO₂@GF battery with enhanced electrochemical performance. This battery exhibits an excellent rate performance (266 mAh g⁻¹ at 0.5 A g⁻¹, 97 mAh g⁻¹ at 50 A g⁻¹), attractive energy density (182.1 Wh kg⁻¹) and power density (31.2 kW kg⁻¹), along with long-term cycle stability. These results shed light on the development of advanced hydronium-ion batteries.     

Multi-Electron Reactions Enabled by Anion-Based Redox Chemistry for High-Energy Multivalent Rechargeable Batteries

The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi-electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single-electron transfer, which are not ideal for multivalent-ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope-like voltage profiles with insertion/extraction redox of less than one electron. Taking VS₄ as a model material, reversible two-electron redox with cationic–anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g⁻¹ at a current density of 100 mA g⁻¹ in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg⁻¹ for RMBs and >500 Wh kg⁻¹ for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg²⁺ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS₄.     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.     

Flexible Li-CO2 Batteries with Liquid-Free Electrolyte

Developing flexible Li-CO₂ batteries is a promising approach to reuse CO₂ and simultaneously supply energy to wearable electronics. However, all reported Li-CO₂ batteries use liquid electrolyte and lack robust electrolyte/electrodes structure, not providing the safety and flexibility required. Herein we demonstrate flexible liquid-free Li-CO₂ batteries based on poly(methacrylate)/poly(ethylene glycol)-LiClO₄-3 wt %SiO₂ composite polymer electrolyte (CPE) and multiwall carbon nanotubes (CNTs) cathodes. The CPE (7.14×10⁻² mS cm⁻¹) incorporates with porous CNTs cathodes, displaying stable structure and small interface resistance. The batteries run for 100 cycles with controlled capacity of 1000 mAh g⁻¹. Moreover, pouch-type flexible batteries exhibit large reversible capacity of 993.3 mAh, high energy density of 521 Wh kg⁻¹, and long operation time of 220 h at different degrees of bending (0–360°) at 55 °C.     

Unlocking the Interfacial Adsorption-Intercalation Pseudocapacitive Storage Limit to Enabling All-Climate,High Energy/Power Density and Durable Zn-Ion Batteries

Sluggish storage kinetics and insufficient performance are the major challenges that restrict the transition metal dichalcogenides (TMDs) applied for zinc ion storage, especially at the extreme temperature conditions. Herein, a multiscale interface structure-integrated modulation concept was presented, to unlock the omnidirectional storage kinetics-enhanced porous VSe_2−x⋅n H₂O host. Theory research indicated that the co-modulation of H₂O intercalation and selenium vacancy enables enhancing the interfacial zinc ion capture ability and decreasing the zinc ion diffusion barrier. Moreover, an interfacial adsorption-intercalation pseudocapacitive storage mechanism was uncovered. Such cathode displayed remarkable storage performance at the wide temperature range (−40–60 °C) in aqueous and solid electrolytes. In particular, it can retain a high specific capacity of 173 mAh g⁻¹ after 5000 cycles at 10 A g⁻¹, as well as a high energy density of 290 Wh kg⁻¹ and a power density of 15.8 kW kg⁻¹ at room temperature. Unexpectedly, a remarkably energy density of 465 Wh kg⁻¹ and power density of 21.26 kW kg⁻¹ at 60 °C also can be achieved, as well as 258 Wh kg⁻¹ and 10.8 kW kg⁻¹ at −20 °C. This work realizes a conceptual breakthrough for extending the interfacial storage limit of layered TMDs to construct all-climate high-performance Zn-ion batteries.     

A High-Energy Aqueous All-Sulfur Battery

Rechargeable aqueous batteries are promising energy storage devices because of their high safety and low cost. However, their energy densities are generally unsatisfactory due to the limited capacities of ion-inserted electrode materials, prohibiting their widespread applications. Herein, a high-energy aqueous all-sulfur battery was constructed via matching S/Cu₂S and S/CaS_x redox couples. In such batteries, both cathodes and anodes undergo the conversion reaction between sulfur/metal sulfides redox couples, which display high specific capacities and rational electrode potential difference. Furthermore, during the charge/discharge process, the simultaneous redox of Cu²⁺ ion charge-carriers also takes place and contributes to a more two-electron transfer, which doubles the capacity of cathodes. As a result, the assembled aqueous all-sulfur batteries deliver a high discharge capacity of 447 mAh g⁻¹ based on total mass of sulfur in cathode and anode at 0.1 A g⁻¹, contributing to an enhanced energy density of 393 Wh kg⁻¹. This work will widen the scope for the design of high-energy aqueous batteries.     

Rechargeable Sodium-Ion Battery Based on Polyazaacene Analogue Anode

The high theoretical specific capacity, strong structural designability and relatively inexpensive manufacturing cost make the exploration of organic electrode materials more attractive in recent years. In this article, owing to the large π-conjugated structure, plenty of nitrogen heteroatoms and multiring aromatic system, polyazaacene analogue poly(1,6-dihydropyrazino[2,3 g]quinoxaline-2,3,8-triyl-7-(2H)-ylidene-7,8-dimethylidene) (PQL) was applied as the anode in sodium-ion batteries (SIBs). PQL was almost insoluble in conventional liquid organic electrolyte (1 M NaClO₄ in ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v=1 : 1) with 5 % fluoroethylene carbonate (FEC)), which strongly improved its cycle stability. The initial discharge capacity was obtained to be 1825 mAh g⁻¹ at the current density of 100 mA g⁻¹ and stabilized at 317 mAh g⁻¹ after 400 cycles with the coulombic efficiency as high as 97 %. It not only showed good rate capability at high current densities (202, 183 mAh g⁻¹ at 1 A g⁻¹ and 1.5 A g⁻¹) but also had a superior energy density around 290 Wh kg⁻¹.     

Highly Concentrated Electrolyte towards Enhanced Energy Density and Cycling Life of Dual-Ion Battery

Dual-ion batteries (DIBs) have attracted much attention owing to their low cost, high voltage, and environmental friendliness. As the source of active ions during the charging/discharging process, the electrolyte plays a critical role in the performance of DIBs, including capacity, energy density, and cycling life. However, most used electrolyte systems based on the LiPF₆ salt demonstrate unsatisfactory performance in DIBs. We have successfully developed a 7.5 mol kg⁻¹ lithium bis(fluorosulfonyl)imide (LiFSI) in a carbonate electrolyte system. Compared with diluted electrolytes, this highly concentrated electrolyte exhibits several advantages: 1) enhanced intercalation capacity and cycling stability of the graphite cathode, 2) optimized structural stability of the Al anode, and 3) significantly increased battery energy density. A proof-of-concept DIB based on this concentrated electrolyte exhibits a discharge capacity of 94.0 mAh g⁻¹ at 200 mA g⁻¹ and 96.8 % capacity retention after 500 cycles. By counting both the electrode materials and electrolyte, the energy density of this DIB reaches up to ≈180 Wh kg⁻¹, which is among the best performances of DIBs reported to date.     

A Two-Dimensional Porphyrin Coordination Supramolecular Network Cathode for High-Performance Aqueous Dual-Ion Battery

Iodine has great potential in the energy storage, but high solubility of I₃⁻ has seriously delayed its promotion. Benefited from abundant active sites and the open channel, two-dimensional coordination supramolecular networks (2D CSNs) is considered to be a candidate for the energy storage. Herein, a 2D porphyrin-CSN cathode named Zn-TCPP for aqueous iodine dual-ion battery (DIB) shows an excellent specific capacity of 278 mAh g⁻¹, and a high energy density of 340 Wh kg⁻¹ at 5 A g⁻¹, as well as a durable cycle performance of 5000 cycles and a high Coulombic efficiency of 98 %. Molecular orbital theory, UV/VIS, Raman spectroscopy and density functional theory (DFT) calculations reveal charge-transfer interaction between the donor of porphyrin nitrogen and the acceptor of I₃⁻, and computational fluid dynamics (CFD) simulations demonstrate the contribution of 2D layered network structure of Zn-TCPP to the penetration of I₃⁻.     

Quasi-Solid Sulfur Conversion for Energetic All-Solid-State Na−S Battery

The high theoretical energy density (1274 Wh kg⁻¹) and high safety enable the all-solid-state Na−S batteries with great promise for stationary energy storage system. However, the uncontrollable solid–liquid-solid multiphase conversion and its associated sluggish polysulfides redox kinetics pose a great challenge in tunning the sulfur speciation pathway for practical Na−S electrochemistry. Herein, we propose a new design methodology for matrix featuring separated bi-catalytic sites that control the multi-step polysulfide transformation in tandem and direct quasi-solid reversible sulfur conversion during battery cycling. It is revealed that the N, P heteroatom hotspots are more favorable for catalyzing the long-chain polysulfides reduction, while PtNi nanocrystals manipulate the direct and full Na₂S₄ to Na₂S low-kinetic conversion during discharging. The electrodeposited Na₂S on strongly coupled PtNi and N, P-codoped carbon host is extremely electroreactive and can be readily recovered back to S₈ without passivation of active species during battery recharging, which delivers a true tandem electrocatalytic quasi-solid sulfur conversion mechanism. Accordingly, stable cycling of the all-solid-state soft-package Na−S pouch cells with an attractive specific capacity of 876 mAh g_S⁻¹ and a high energy of 608 Wh kg_cathode⁻¹ (172 Wh kg⁻¹, based on the total mass of cathode and anode) at 60 °C are demonstrated.     

A Sustainable Redox‐Flow Battery with an Aluminum‐Based,Deep‐Eutectic‐Solvent Anolyte

Nonaqueous redox‐flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum‐based deep‐eutectic‐solvent is investigated as an anolyte for redox‐flow batteries. The aluminum‐based deep‐eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li⁺/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L⁻¹ and an energy density of 189 Wh L⁻¹ or 165 Wh kg⁻¹ have been achieved when coupled with a I₃⁻/I⁻ catholyte. The prototype cell has also been extended to the use of a Br₂‐based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L⁻¹. The synergy of highly abundant, dendrite‐free, multi‐electron‐reaction aluminum anodes and environmentally benign deep‐eutectic‐solvent anolytes reveals great potential towards cost‐effective, sustainable redox‐flow batteries.     

Scalable Synthesis of One-Dimensional Mesoporous ZnMnO3 Nanorods with Ultra-Stable and High Rate Capability for Efficient Lithium Storage

The cost-efficient ZnMnO₃ has attracted increasing attention as a prospective anode candidate for advanced lithium-ion batteries (LIBs) owing to its resourceful abundance, large lithium storage capacity and low operating voltage. However, its practical application is still seriously limited by the modest cycling and rate performances. Herein, a facile design to scalable synthesize unique one-dimensional (1D) mesoporous ZnMnO₃ nanorods (ZMO-NRs) composed of nanoscale particles (≈11 nm) is reported. The 1D mesoporous structure and nanoscale building blocks of the ZMO-NRs effectively promote the transport of ions/electrons, accommodate severe volume changes, and expose more active sites for lithium storage. Benefiting from these appealing structural merits, the obtained ZMO-NRs anode exhibits excellent rate behavior (≈454 mAh g⁻¹ at 2 A g⁻¹) and ultra-long term cyclic performance (≈949.7 mAh g⁻¹ even over 500 cycles at 0.5 A g⁻¹) for efficient lithium storage. Additionally, the LiNi_0.8Co_0.1Mn_0.1O₂//ZMO-NRs full cell presents a practical energy density (≈192.2 Wh kg⁻¹) and impressive cyclability with approximately 91 % capacity retention over 110 cycles. This highlights that the ZMO-NRs product is a highly promising high-rate and stable electrode candidate towards advanced LIBs in electronic devices and sustainable energy storage applications.     

Oxygen Vacancies-rich Manganese Oxide with Flower-like Nanosheets for High Performance Supercapacitors

Here, flower-like manganese oxide with enriched oxygen vacancies were reported for high performance supercapacitors. The moderate oxygen-vacancy were achieved by controlling annealing atmosphere. Benefiting from improving the conductivity and the density of active sites, MnO_x−Ar sample as an electrode material has remarkable specific capacity (339 mAh g⁻¹ at 0.5 A g⁻¹), extraordinary rate capability (90 % capacity retention at 1 A g⁻¹), and good cycling property (90 % capacity retention at 1 A g⁻¹ after 5000 cycles). Additionally, the asymmetric supercapacitor (ASC) was assembled which used the MnO_x−Ar sample as cathode and Kochen Black (KB) as anode, which displayed a remarkable energy density (16 Wh kg⁻¹) at a large power density (7593 W kg⁻¹). These results, on the one hand, further expand the application of MnO₂-based materials, and on the other hand, offer a new perspective for the oxygen non-stoichiometry in material electrochemistry.     

Cover Feature: Low-Cost and Scalable Ni-Prussian Blue Analogue//Functionalized Carbon Based Na-Ion Systems for all Climate Operations (ChemPhysChem 4/2023)

Herein, we have developed a sodium ion based aqueous energy storage device with nickel prussian-blue-analogue (Ni-PBA) positive and functionalized carbon-black negative electrodes in 1 M Na₂SO₄ electrolyte solution. The components required to develop the device, i. e., stainless steel (SS) current-collectors, absorbent-glass-mat separator, electrolyte, carbon-black, and precursors of Ni-PBA, are all environmentally benign and inexpensive. To minimize the corrosion of pristine-SS, polyaniline coating on the SS surface is applied by in situ electrodeposition method. The full cell exhibits a specific capacity of 28 mAh g⁻¹ with 90 % Coulomb efficiency (@0.2C), an energy density of 34 Wh kg⁻¹ (@20 W kg⁻¹), a power density of 100 W kg⁻¹ (@18 Wh kg⁻¹) and a good life cycle (70 % capacity-retention over 500 cycles @1.0C rate) within the 0–1.2 V window. The cell performance is further tested under variable temperatures, and 0–50 °C range is reported to be the working window for this cell.     

A Sustainable Redox-Flow Battery with an Aluminum-Based,Deep-Eutectic-Solvent Anolyte

Nonaqueous redox-flow batteries are an emerging energy storage technology for grid storage systems, but the development of anolytes has lagged far behind that of catholytes due to the major limitations of the redox species, which exhibit relatively low solubility and inadequate redox potentials. Herein, an aluminum-based deep-eutectic-solvent is investigated as an anolyte for redox-flow batteries. The aluminum-based deep-eutectic solvent demonstrated a significantly enhanced concentration of circa 3.2 m in the anolyte and a relatively low redox potential of 2.2 V vs. Li⁺/Li. The electrochemical measurements highlight that a reversible volumetric capacity of 145 Ah L⁻¹ and an energy density of 189 Wh L⁻¹ or 165 Wh kg⁻¹ have been achieved when coupled with a I₃⁻/I⁻ catholyte. The prototype cell has also been extended to the use of a Br₂-based catholyte, exhibiting a higher cell voltage with a theoretical energy density of over 200 Wh L⁻¹. The synergy of highly abundant, dendrite-free, multi-electron-reaction aluminum anodes and environmentally benign deep-eutectic-solvent anolytes reveals great potential towards cost-effective, sustainable redox-flow batteries.     

Enhanced performance of lithium polymer batteries using a V2O5–PEG composite cathode

A new concept is proposed to realize solid-state high-performance lithium polymer batteries in which two different polymers are used as ionically conductive matrices in the cathode and in the separator. A solid, low molecular weight poly(ethylene glycol) was used in the cathode while a blend with a higher molecular weight poly(ethylene oxide) (PEO) was used in the separator. The enhanced transport properties in the cathodic compartment allow us to discharge the battery (190 mAh g⁻¹) at a moderate temperature (65°C) in a reasonable time (about 3.3 h). Batteries cycled at 100°C showed enhanced performance with respect to PEO-based batteries. At a power density of about 416 W kg⁻¹, energy density as high as 460 Wh kg⁻¹, based on the weight of the active material, was achieved in about 1 h of discharge. The work was developed within the ALPE (Advanced Lithium Polymer Electric Vehicle Battery) project, an Italian integrated project devoted to the realization of lithium polymer batteries for electric vehicle applications, in collaboration with the Osaka National Research Institute.     

Multi‐Electron Reactions Enabled by Anion‐Based Redox Chemistry for High‐Energy Multivalent Rechargeable Batteries

The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi‐electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single‐electron transfer, which are not ideal for multivalent‐ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope‐like voltage profiles with insertion/extraction redox of less than one electron. Taking VS₄ as a model material, reversible two‐electron redox with cationic–anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g^?1 at a current density of 100 mA g^?1 in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg^?1 for RMBs and >500 Wh kg^?1 for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg²⁺ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS₄.     

Flower-like NiCo-carbonate Hydroxides for High-performance Solid-state Hybrid Supercapacitor

Compared to the traditional transition metal layered double hydroxides, transition metal layered carbonate double hydroxides (TMC-LDHs) possess superior electrochemical performance in theory. But TMC-LDHs have not received its deserved attention, especially for application in the energy storage field. In this work, a flower-like TMC-LDH (Ni_0.75Co_0.25(CO₃)_0.125(OH)₂, NCCO) material was successfully prepared by hydrothermal method, which exhibits a high specific capacity of 306.8 mAh g⁻¹ (0.52 mAh cm⁻²) at 0.5 A g⁻¹ with capacity retention of 70.5 % after 2000 cycles. The solid-state hybrid supercapacitor device NCCO//PVA/KOH//IHPC based on the prepared NCCO material and an interconnected hierarchical porous carbon (IHPC) delivers a high specific energy of 50.96 Wh kg⁻¹ at a specific power of 1.06 kW kg⁻¹, and a high specific energy of 36.39 Wh kg⁻¹ still can be delivered at a high specific power of 10.49 kW kg⁻¹. More than 181.2 % of initial specific capacity is retained after 12000 cycles. The specific energy, energy retention under large specific power, and the cycle stability of the assembled device are better than most of the solid-state hybrid supercapacitors that have been reported. These results demonstrate the promising prospect of the TMC-LDH material in the practical application in advanced solid-state supercapacitors.     

Proton-Conductive Supramolecular Hydrogen-Bonded Organic Superstructures for High-Performance Zinc-Organic Batteries

With fast (de)coordination kinetics, the smallest and the lightest proton stands out as the most ideal charge carrier for aqueous Zn-organic batteries (ZOBs). Hydrogen-bonding networks with rapid Grotthuss proton conduction is particularly suitable for organic cathodes, yet not reported. We report the supramolecular self-assembly of cyanuric acid and 1,3,5-triazine-2,4,6-triamine into organic superstructures through in-plane H-bonds and out-of-plane π-π interaction. The supramolecular superstructures exhibit highly stable lock-and-key H-bonding networks with an ultralow activation energy for protonation (0.09 eV vs. 0.25 eV of zincification). Then, high-kinetics H⁺ coordination is prior to Zn²⁺ into protophilic C=O sites via a two-step nine-electron reaction. The assembled ZOBs show high-rate capability (135 mAh g⁻¹ at 150 A g⁻¹), high energy density (267 Wh kg⁻¹_cathode) and ultra-long life (50 000 cycles at 10 A g⁻¹), becoming the state-of-the-art ZOBs in comprehensive performances.     

A Bipolar and Self‐Polymerized Phthalocyanine Complex for Fast and Tunable Energy Storage in Dual‐Ion Batteries

Bipolar redox organics have attracted interest as electrode materials for energy storage owing to their flexibility, sustainability and environmental friendliness. However, an understanding of their application in all‐organic batteries, let alone dual‐ion batteries (DIBs), is in its infancy. Herein, we propose a strategy to screen a variety of phthalocyanine‐based bipolar organics. The self‐polymerizable bipolar Cu tetraaminephthalocyanine (CuTAPc) shows multifunctional applications in various energy storage systems, including lithium‐based DIBs using CuTAPc as the cathode material, graphite‐based DIBs using CuTAPc as the anode material and symmetric DIBs using CuTAPc as both the cathode and anode materials. Notably, in lithium‐based DIBs, the use of CuTAPc as the cathode material results in a high discharge capacity of 236 mAh g^?1 at 50 mA g^?1 and a high reversible capacity of 74.3 mAh g^?1 after 4000 cycles at 4 A g^?1. Most importantly, a high energy density of 239 Wh kg^?1 and power density of 11.5 kW kg^?1 can be obtained in all‐organic symmetric DIBs.