MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.     

MHD Couette two-fluid flow and heat transfer in presence of uniform inclined magnetic field

The MHD Couette flow of two immiscible fluids in a parallel plate channel in the presence of an applied electric and inclined magnetic field is investigated in the paper. One of the fluids is assumed to be electrically conducting, while the other fluid and the channel plates are assumed to be electrically insulating. Separate solutions with appropriate boundary conditions for each fluid are obtained and these solutions are matched at the interface using suitable matching conditions. The partial differential equations governing the flow and heat transfer are transformed to ordinary differential equations and closed-form solutions are obtained in both fluid regions of the channel. The results for various values of the Hartmann number, the angle of magnetic field inclination, the loading parameter and the ratio of the heights of the fluids are presented graphically to show their effect on the flow and heat transfer characteristics.     

Temperature distribution for MHD flow between coaxial cylinders with discontinuity in wall temperatures

The temperature distribution in the MHD axial flow between two coaxial infinite cylinders under a transverse radial magnetic field has been found out when there is a discontinuity in the wall temperatures at a section of the channel. The numerical values of temperature distribution at large distances from the section have been worked out first for various Hartman numbers. To this is superimposed the perturbation introduced due to discontinuity. Near the region of discontinuity the approximate matching is done by using the finite difference method. Tables and graphs are given to depict the behaviour with various Hartman numbers. A relief of the temperature distribution is also given. It is found that the temperature shows a decreasing tendency with increasing Hartman number, a well-known characteristic of such type of problems.     

MHD boundary layer flow and heat transfer over a stretching sheet with induced magnetic field

In this paper, the problem of steady magnetohydrodynamic boundary layer flow and heat transfer of a viscous and electrically conducting fluid over a stretching sheet is studied. The effect of the induced magnetic field is taken into account. The transformed ordinary differential equations are solved numerically using the finite-difference scheme known as the Keller-box method. Numerical results are obtained for various values of the magnetic parameter, the reciprocal magnetic Prandtl number and the Prandtl number. The effects of these parameters on the flow and heat transfer characteristics are determined and discussed in detail. When the magnetic field is absent, the closed analytical results for the skin friction are compared with the exact numerical results. Also the numerical results for the heat flux from the stretching surface are compared with the results reported by other authors when the magnetic field is absent. It is found that very good agreement exists.     

Nonisothermal steady flow of a viscoplastic liquid between two coaxial rotating cylinders

Rotational viscosimeters are widely used to determine liquid viscosity. The technique for processing the experimental data is based fundamentally on the analytic solution of the problem of isothermal flow of a viscous liquid between two rotating cylinders.If in the course of the experiment the heat released due to the internal friction leads to significant heating, then the processing of the experimental results using the equations obtained on the assumption of isothermocity of the flow may lead to large errors. The dissipative heating may be reduced by reducing the angular velocity of rotation of the cylinder; however extensive reduction of the angular velocity is not desirable, since this leads to an increase of the measurement relative error. In addition, there is the possibility of conducting the experiments with a wide variation of the angular velocities in order to identify the structural-rheological peculiarities of the liquid. In the latter case we must be able to separate the purely thermal effects from the influence of the rheological factors. All these questions are discussed in detail in [1]. The authors of [1] obtained the solution of the problem of nonisothermal flow of a Newtonian fluid between two rotating cylinders and gave a technique for processing the experimental data which takes account of the dissipative heating of the fluid. The present paper pursues the same objective for a visco-plastic fluid.An attempt to solve the problem of nonisothermal flow of a viscoplastic fluid was made by Dzhafarov in [2], where the problem was solved in two versions. In the first version it was considered that the viscosity varies hyperbolically with the temperature and the gap between the cylinders is small in comparison with the radius of the inner cylinder. As a result of the linearization of the equations of motion and heat balance, it turned out that in fact the problem of Couette flow of a viscoplastic fluid was solved rather than the original problem. In this case, naturally, such a characteristic of the flow of a viscoplastic fluid in an annular gap as the possibility of the formation of an elastic zone was not covered. In the second version the problem was solved under the assumption that the viscosity is independent of the temperature and the angular velocity is small.In the present study the problem is solved without the limitations discussed above on the angular velocity, the fluid visoosity, and the gap between the cylinders. In this case we consider two types of temperature boundary conditions: a) constant temperatures are specified on the surfaces of the cylinders, which in the general case may be different; and b) a constant temperature is given on the surface of the outer cylinder and the inner cylinder is thermally insulated.     

Order in chaotic pseudoplastic flow between coaxial cylinders

Order is found within the chaotic nonlinear flow between rotating coaxial cylinders. The flow stability analysis is carried out for a pseudoplastic fluid through bifurcation diagram and Lyapunov exponent histogram. The fluid is assumed to follow the Carreau–Bird model, and mixed boundary conditions are imposed. The low-order dynamical system, resulted from Galerkin projection of the conservation of mass and momentum equations, includes additional nonlinear terms in the velocity components originated from the shear-dependent viscosity. It is observed that the base flow loses its radial flow stability to the vortex structure at a lower critical Taylor number, as the shear-thinning effects increase. The emergence of the vortices corresponds to the onset of a supercritical bifurcation, which is also seen in the flow of a linear fluid. However, unlike the Newtonian case, shear-thinning Taylor vortices lose their stability as the Taylor number reaches a second critical number corresponding to the onset of a Hopf bifurcation. Complete flow field together with viscosity maps are given for different scenarios in the bifurcation diagram.     

Visualization of natural convection heat transfer on horizontal cylinders

Natural convection heat transfer phenomena on horizontal cylinders were investigated experimentally in order to explore the applicability of analogy experimental method using the copper electroplating system and to visualize the local heat transfer depending on the angular position and the diameter of the horizontal cylinder. The diameters of the cylinders are varied from 0.01 to 0.15 m, which correspond to the Rayleigh numbers of 1.73 × 10⁷–5.69 × 10¹¹. The measured mass transfer coefficients show good agreements with the existing heat transfer correlations. The patterns of copper plated on the aluminum cathodes for various Rayleigh numbers reveal and visualize the local heat transfer depending on the angular position and show good agreement with the works of Kitamura et al. The hydrogen bubbles produced at higher applied potential visualize the plumes appeared on top region of the cylinders.     

MHD flow and heat transfer of micropolar fluid between two porous disks

A numerical study is carried out for the axisymmetric steady laminar incompressible flow of an electrically conducting micropolar fluid between two infinite parallel porous disks with the constant uniform injection through the surface of the disks. The fluid is subjected to an external transverse magnetic field. The governing nonlinear equations of motion are transformed into a dimensionless form through von Karman’s similarity transformation. An algorithm based on a finite difference scheme is used to solve the reduced coupled ordinary differential equations under associated boundary conditions. The effects of the Reynolds number, the magnetic parameter, the micropolar parameter, and the Prandtl number on the flow velocity and temperature distributions are discussed. The results agree well with those of the previously published work for special cases. The investigation predicts that the heat transfer rate at the surfaces of the disks increases with the increases in the Reynolds number, the magnetic parameter, and the Prandtl number. The shear stresses decrease with the increase in the injection while increase with the increase in the applied magnetic field. The shear stress factor is lower for micropolar fluids than for Newtonian fluids, which may be beneficial in the flow and thermal control in the polymeric processing.     

Analytical solution of the problem of heat transfer in rarefied gas between two coaxial cylinders

The method of characteristics was used within the framework of the kinetic approach to construct an analytical solution of the problem of heat transfer in a channel whose walls were formed by two coaxial cylinders. The main equation was the Williams kinetic equation, and the boundary condition on the channel walls was the diffusion reflection model. The vector field of the heat flux in the channel was determined, and the specific heat flux through the cross section of the channel was calculated. It was shown that the results obtained for a limiting case, in which the cylinder radii were significantly greater than the mean length of free path of gas molecules, were in good agreement with the results obtained for a plane channel with infinite parallel walls.     

Kinetic analysis of longitudinal Couette flow between coaxial cylinders

On the basis of a model kinetic equation, the rarefied gas flow between coaxial circular cylinders, of which the outer one is at rest while the inner one travels along its symmetry axis at a constant velocity, is studied. The problem is solved numerically in both the linear and nonlinear formulations by an implicit conservative method of second-order accuracy. The effect of the rarefaction, the cylinder radius ratio, and the inner cylinder velocity on the flow parameters is investigated. The limits of applicability of the linearized kinetic equation are established.     

Effects of MHD free convection and mass transfer on the flow past an oscillating infinite coaxial vertical circular cylinder

The effects of MHD free convection and mass transfer are taken into account on the flow past oscillating infinite coaxial vertical circular cylinder. The analytical expressions for velocity, temperature and concentration of the fluid are obtained by using perturbation technique.

---

Einwirkungen von freier MHD-Konvektion und Stoffübertragung auf eine Strömung nach einem schwingenden unendlichen koaxialen vertikalen Zylinder

Zusammenfassung Die Einwirkungen der freien MHD-Konvektion und Stoffübertragung auf eine Strömung nach einem schwingenden, unendlichen, koaxialen, vertikalen Zylinder wurden untersucht. Die analytischen Ausdrücke der Geschwindigkeit, Temperatur und Fluidkonzentration sind durch die Perturbationstechnik erhalten worden.

---

Nomenclature C _p Specific heat at constant temperature - C the species concentration near the circular cylinder - C _w the species concentration of the circular cylinder - C the species concentration of the fluid at infinite - * dimensionless species concentration - D chemical molecular diffusivity - g acceleration due to gravity - Gr Grashof number - Gm modified Grashof number - K thermal conductivity - Pr Prandtl number - r _a ,r _b radius of inner and outer cylinder - a, b dimensionless inner and outer radius - r,r coordinate and dimensionless coordinate normal to the circular cylinder - Sc Schmidt number - t time - t dimensionless time - T temperature of the fluid near the circular cylinder - T _w temperature of the circular cylinder - T temperature of the fluid at infinite - u velocity of the fluid - u dimensionless velocity of the fluid - U ₀ reference velocity - z,z coordinate and dimensionless coordinate along the circular cylinder - coefficient of volume expansion - * coefficient of thermal expansion with concentration - dimensionless temperature - H ₀ magnetic field intensity - coefficient of viscosity - _e permeability (magnetic) - kinematic viscosity - electric conductivity - density - M Hartmann number - dimensionless skin-friction - frequency - dimensionless frequency     

The effect of magnetic field on two-phase liquid metal flow

In this paper, the basic equations of two-phase liquid metal flow in a magnetic field are derived, and specifically, two-phase liquid metal MHD flow in a rectangular channel is studied, and the expressions of velocity distribution of liquid and gas phases and the ratioK ₀ of the pressure drop in two-phase MHD flow to that in single-phase are derived. Results of calculation show that the ratioK ₀ is smaller than unity and decreases with increasing void fraction and Hartmann number because the effective electrical conductivity in the two-phase case decreases. The Project is supported by the National Natural Science Foundation of China.     

Effect of vertical separation distance on laminar natural convective heat transfer over two vertically spaced equitemperature horizontal cylinders

A numerical study of laminar natural convective heat transfer in air from a pair of equitemperature horizontal cylinders placed one above the other in a vertical plane was carried out. Prime attention was focused on how heat transfer characteristics of the upper cylinder are affected by center-to-center separation distance between two cylinders (CCD). The study was limited to Rayleigh number ranging from 2×10⁴ to 2×10⁵. The vertical center-to-center separation distance between the cylinders was varied from two to ten cylinder diameters. A finite difference scheme based on the integration of the governing equations over finite cells was used. Temperature profiles around two cylinders, and heat transfer coefficients for each cylinder were obtained. The effect of center-to-center separation distance between the cylinders on heat transfer from the upper cylinder was considered. For assessing the accuracy of the current computational approach the results are compared with the experimental results reported by Sparrow and Niethammer [10].