颗粒介质固-流态转变的理论分析及实验研究

颗粒介质由大量离散的颗粒聚集而成,因而与传统固体和流体不同,运动过程中的颗粒介质中可能同时存在多种流态及其相互间复杂的转换过程. 颗粒介质弹性失稳机理、不可恢复应变量化是研究颗粒介质固态和流态及固-流态转变的关键. 在前期建立的双颗粒温度热力学(two-granular-temperature, TGT) 理论基础上,确定了颗粒介质的弹性稳定性条件,建立了不可恢复应变流动法则,搭建了描述颗粒固态-液态及其相互转化的简单模型. 颗粒堆积体坍塌过程是典型的颗粒介质固态和流态及其转变过程,因此本文首先开展了25 167 个陶颗粒堆积体坍塌过程的实验研究,并使用基于TGT 理论的物质点方法和离散元方法对物理实验进行了模拟. 结果表明,模型数值结果与物理实验在颗粒堆坍塌过程中的形态、速度分布等细节上吻合很好,同时也发现了现阶段所使用的物质点方法和TGT 理论的不足. 初步说明TGT 理论可以实现颗粒介质固态和流态,以及状态转变的描述.      

Smoothed particle hydrodynamics for coarse-grained modeling of rapid granular flow

We simulated rapid flow in transient plane Couette flows of granular particles using the smoothed particle hydrodynamics(SPH) solutions of a set of continuum equations.This simulation was performed to test the viability of SPH in solving the equations for the solid phase of the two-fluid model associated with fluidization.We found that SPH requires the handling of fewer particles in simulating the collective behavior of rapid granular flow,thereby bolstering expectations of solving the equations for the solid phase in the two-fluid modeling of fluidization.Further work is needed to investigate the effect of terms describing pressure and viscous stress of solids on stability in simulations.     

含液颗粒材料液固耦合分析的离散颗粒模型及特征线SPH法

对含液颗粒材料流固耦合分析建议了一个基于离散颗粒模型与特征线SPH法的显式拉格朗日-欧拉无网格方案。在已有的用以模拟固体颗粒集合体的离散颗粒模型[1]基础上,将颗粒间间隙内的流体模型化为连续介质,对其提出并推导了基于特征线的SPH法。数值例题显示了所建议方案在模拟颗粒材料与间隙流相互作用的能力和性能以及间隙流体对颗粒结构承载能力及变形的影响。     

A 3D smoothed particle hydrodynamics model for erosional dam-break floods

A mesh-less smoothed particle hydrodynamics (SPH) model for bed-load transport on erosional dam-break floods is presented. This mixture model describes both the liquid phase and the solid granular material. The model is validated on the results from several experiments on erosional dam breaks. A comparison between the present model and a 2-phase SPH model for geotechnical applications (Gadget Soil; TUHH) is performed. A demonstrative 3D erosional dam break on complex topography is investigated. The present 3D mixture model is characterised by: no tuning parameter for the mixture viscosity; consistency with the Kinetic Theory of Granular Flow; ability to reproduce the evolution of the free surface and the bed-load transport layer; applicability to practical problems in civil engineering. The numerical developments of this study are represented by a new SPH scheme for bed-load transport, which is implemented in the SPH code SPHERA v.8.0 (RSE SpA), distributed as FOSS on GitHub.     

Simulated configurational temperature of particles and a model of constitutive relations of rapid-intermediate-dense granular flow based on generalized granular temperature

In gas–solid flat-base spout bed with a jet, the flow of particles must go through an intermediate regime where both kinetic/collisional and frictional contributions play a role. In this paper, the statistical framework is proposed to define the generalized granular temperature which sums up the configurational temperature and translational granular temperature. The configurational temperature, translational and rotational granular temperatures of particles are simulated by means of CFD-DEM (discrete element method) in a 3D flat-base spout bed with a jet. The configurational temperatures of particles are calculated from instantaneous overlaps of particles. The translational and rotational granular temperatures of particles are calculated from instantaneous translational and angular velocities of particles. Roughly, the simulated translational and rotational granular temperatures increase, reach maximum, and then decrease with the increase of solids volume fractions. However, the configurational temperature increases with the increase of solids volume fractions. At high solid volume fraction, the predicted configurational temperatures are larger than the translational and rotational granular temperatures, indicating that the rate of energy dissipation do contributes by contact deformation of elastic particles. The generalized granular temperature is proposed to show the relation between the variance of the fluctuation velocity of deformation and the variance of the translational fluctuation velocity of particles. The constitutive relations of particle pressure, viscosity, granular conductivity of fluctuating energy and energy dissipation in rapid-intermediate-dense granular flows are correlated to the generalized granular temperature. The variations of particle pressure, shear viscosity, energy dissipation and granular conductivity are analyzed on the basis of generalized granular temperature in a flat-base spout bed with a jet. The axial velocities of particles predicted by a gas–solid two-fluid model of rapid-intermediate-dense granular flows agree with experimental results in a spout bed.     

Superquadric DEM-SPH coupling method for interaction between non-spherical granular materials and fluids

The research on the coupling method of non-spherical granular materials and fluids aims to predict the particle–fluid interaction in this study. A coupling method based on superquadric elements is developed to describe the interaction between non-spherical solid particles and fluids. The discrete element method (DEM) and the smoothed particle hydrodynamics (SPH) are adopted to simulate granular materials and fluids. The repulsive force model is adopted to calculate the coupling force and then a contact detection method is established for the interaction between the superquadric element and the fluid particle. The contact detection method captures the shape of superquadric element and calculates the distance from the fluid particle to the surface of superquadric element. Simulation cases focusing on the coupling force model, energy transfer, and large-scale calculations have been implemented to verify the validity of the proposed coupling method. The coupling force model accurately represents the water entry process of a spherical solid particle, and reasonably reflects the difference of solid particles with different shapes. In the water entry process of multiple solid particles, the total energy of the water entry process of multiple solid particles tends to be stable. The collapse process of the partially submerged granular column is simulated and analyzed under different parameters. Therefore, this coupling method is suitable to simulate fluid–particle systems containing solid particles with multiple shapes.     

An SPH model for free surface flows with moving rigid objects

This paper presents a computational model for free surface flows interacting with moving rigid bodies. The model is based on the SPH method, which is a popular meshfree, Lagrangian particle method and can naturally treat large flow deformation and moving features without any interface/surface capture or tracking algorithm. Fluid particles are used to model the free surface flows which are governed by Navier–Stokes equations, and solid particles are used to model the dynamic movement (translation and rotation) of moving rigid objects. The interaction of the neighboring fluid and solid particles renders the fluid–solid interaction and the non‐slip solid boundary conditions. The SPH method is improved with corrections on the SPH kernel and kernel gradients, enhancement of solid boundary condition, and implementation of Reynolds‐averaged Navier–Stokes turbulence model. Three numerical examples including the water exit of a cylinder, the sinking of a submerged cylinder and the complicated motion of an elliptical cylinder near free surface are provided. The obtained numerical results show good agreement with results from other sources and clearly demonstrate the effectiveness of the presented meshfree particle model in modeling free surface flows with moving objects. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel hybrid solid-like fluid-like (SLFL) method for the simulation of dry granular flows

This paper proposes a novel hybrid method to simulate the dry granular flow of materials over a wide range of inertial numbers that simultaneously covers the quasi-static and dense granular flow regimes. To overcome the lack of incremental objectivity whenever large deformations occur in solid-like regimes and to remove computational singularities in fluid-like regimes close to rest, the elastic–perfectly plastic theory based on the Drucker–Prager yield criterion is combined with the theory of dense granular flows. By implementing some new modifications at the boundaries and removing all ghost particles, smoothed particle hydrodynamics (SPH) is used as the framework for the method. A number of benchmark problems have been solved to show the capabilities of the new modified SPH method. Precise prediction of both location and pressure makes the modifications comparable with the previous works on SPH. Finally, the method is used to solve the classic 2D dry granular cliff collapse problem and to model dry granular material flow inside a rotary drum. The outcomes of the numerical simulation show good agreement with tabletop experiments and published results.     

Investigation on effect of drag models on flow behavior of power-law fluid–solid two-phase flow in fluidized bed

In this study, a Eulerian-Eulerian two-fluid model combined with the kinetic theory of granular flow is adopted to simulate power-law fluid–solid two-phase flow in the fluidized bed. Two new power-law liquid–solid drag models are proposed based on the rheological equation of power-law fluid and pressure drop. One called model A is a modified drag model considering tortuosity of flow channel and ratio of the throat to pore, and the other called model B is a blending drag model combining drag coefficients of high and low particle concentrations. Predictions are compared with experimental data measured by Lali et al., where the computed porosities from model B are closer to the measured data than other models. Furthermore, the predicted pressure drop rises as liquid velocity increases, while it decreases with the increase of particle size. Simulation results indicate that the increases of consistency coefficient and flow behavior index lead to the decrease of drag coefficient, and particle concentration, granular temperature, granular pressure, and granular viscosity go down accordingly.     

多相流动的光滑粒子流体动力学方法研究综述

光滑粒子流体动力学(smoothed particle hydrodynamics, SPH)具有粒子方法的无网格和全拉格朗日特征, 适用于具有界面大变形、不连续性和多物理场的多相流的高精度模拟. SPH方法模拟多相流已有大量报道, 具体的实现方式也大不相同. 本文首先阐述了采用SPH方法模拟流体的基本控制方程, 以及求解过程中需要考虑的流体压力求解、表面张力、固体边界等问题. 整理和总结了基于SPH方法进行多相流模拟的主要实现方式: (1)双流体模型的拉格朗日求解器: 两相离散为两组独立SPH粒子, 并用显式相间作用耦合两相; (2)多相SPH方法: SPH方法对多相流模拟的自然延伸, 相间作用由SPH参数隐式描述; (3) SPH与其他离散方法的耦合: 差异较大的两相各自采用不同离散方法, 发挥不同拉格朗日方法的优点; (4) SPH和基于网格方法的耦合: 网格方法处理简单的单相流动主体, 获得精度和效率间的平衡. 另外, 还在模拟参数物理化等方面论述了与SPH方法模拟多相流相关的一些改进和修正方法, 并在最后讨论和建议了提高多相流SPH模拟效率和精度的措施.      

颗粒物质中的多尺度问题

颗粒物质是大量离散的固体颗粒相互作用而组成的复杂体系. 依据颗粒排布的稀疏程度, 体系可分为颗粒气体、颗粒流体和颗粒固体,它们有不同本质的动量传递和能量耗散机制. 后两者属于密集颗粒物质体系,内部形成了颗粒$\to $力链$ \to$体系的多尺度结 构,并涉及多个特征时间尺度,是典型的多尺度体系. 合理分割体系结构层 次、正确理解不同层次的物理过程、并确定它们之间的关联是密集颗粒物质研究的核心任务. 本文依次分析了密集颗粒物质的内在物理图像、多尺度结构层次和特征时间等,并介绍了多 尺度研究框架.     

Simulating bubble dynamics in a buoyant system

Multiphase flows are critical components of many physical systems; however, numerical models of multiphase flows with large parameter gradients can be challenging. Here, two different numerical methods, volume of fluid (VOF) and smoothed particle hydrodynamics (SPH), are used to model the buoyant rise of isolated gas bubbles through quiescent fluids for a range of Bond and Reynolds numbers. The VOF is an Eulerian grid–based method, whereas the SPH is Lagrangian and mesh free. Each method has unique strengths and weaknesses, and a comparison of the two approaches as applied to multiphase phenomena has not previously been performed. The VOF and SPH simulations are compared, verified, and validated. Results using two-dimensional VOF and SPH simulations are similar to each other and are able to reproduce numerical benchmarks and experimental results for sufficiently large Morton and Reynolds numbers. It is also shown that at low Reynolds numbers, the two methods, SPH and VOF, diverge in the transient regime of the bubble rise. Regimes that require simulations capable of representing three-dimensional drag are identified as well as regimes in which results from VOF and SPH diverge.     

三维自适应FE-SPH耦合算法在多层间隔金属靶侵彻问题中的应用

鉴于有限元算法不能有效地模拟侵彻过程所产生的金属碎片, 本文中基于三维自适应FE-SPH耦合算法的基本理论, 自主开发了模拟多层间隔金属靶侵彻问题的三维FE-SPH耦合计算程序。该程序采用四面体单元对多层间隔金属靶侵彻模型进行初始离散, 计算过程中, 当四面体单元等效塑性应变超过某一设定值时, 单元自动转化为SPH粒子, 并引入有限单元-粒子接触算法和耦合算法, 实现大变形和破碎区域采用SPH方法计算, 克服有限元法单元畸变存在的问题。多层间隔靶侵彻算例分析表明, 三维FE-SPH耦合计算程序采用等效塑性应变作为转化判据计算结果较稳定, 并且能够有效地再现侵彻过程中所产生的碎片, 能够模拟侵彻碎片对后层靶的毁伤效应。     

钟摆状态下湿颗粒坍塌流动行为及其动力相似性

基于建立的湿颗粒离散动力学模型,本文系统研究了钟摆状态下湿颗粒柱在重力驱动下的坍塌流动过程,主要考虑了颗粒粒径、液体表面张力系数和液体含量等参数对系统坍塌流动模式和动力学行为的影响。研究发现,在湿颗粒系统中,颗粒粒径和液体表面张力系数会改变颗粒间的毛细力大小,引起系统发生不同的坍塌流动模式,而液体含量仅定量影响颗粒坍塌后的堆积形态。在此基础上,进一步探讨了不同模式下系统坍塌流动行为与模型参数的相关性,发现无量纲Bond数是决定钟摆状态下湿颗粒物质坍塌流动动力学行为的本质因素。     

岩土类颗粒物质宏-细观力学研究进展

岩土类颗粒物质在自然界、工程建设以及日常生活中普遍存在,其运动特性的研究在力学界已经开展了几十年.在近20年开展的一系列小尺寸物理实验中,颗粒物质表现出许多新奇现象,人们从物理角度开展了系统研究,在统计力学中,颗粒固体的流体动力学等理论研究以及实验检测技术等方面都取得突破性进展,深刻地揭示了颗粒材料的物理机制,促使力学...     

Modeling fluid-particle interaction in dilute-phase turbulent liquid-particle flow simulation

The present work examines the predictive capability of a two-fluid CFD model that is based on the kinetic theory of granular flow in simulating dilute-phase turbulent liquid-particle pipe flows in which the inter-stitial fluid effect on the particle fluctuating motion is significant.The impacts of employing different drag correlations and turbulence closure models to describe the fluid-particle interactions(i.e.drag force and long-range interaction)are examined at both the mean and fluctuating velocity levels.The model pre-dictions are validated using experimental data of turbulent liquid-particle flows in a vertical pipe at different particle Reynolds numbers(ReP > 400 and ReP < 400),which characterize the importance of the vortex shedding phenomenon in the fluid-phase turbulence modulation.The results indicate that(1)the fluctuating velocity level predictions at different ReP are highly sensitive to the drag correlation selec-tion and(2)different turbulence closure models must be employed to accurately describe the long-range fluid-particle interaction in each phase.In general,good agreement is found between the model predic-tions and the experimental data at both the mean and fluctuating velocity levels provided that appropriate combinations of the drag correlation and the turbulence closure model are selected depending on Rep.     

The influence of the drag force due to the interstitial gas on granular flows down a chute

Fully-developed steady flow of granular material down an inclined chute has been a subject of much research interest, but the effect of the interstitial gas has usually been ignored. In this paper, new expressions for the drag force and energy dissipation caused by the interstitial gas (ignoring the turbulent fluctuations of the gas phase) are derived and used to modify the governing equations derived from the kinetic theory approach for granular–gas mixture flows, where particles are relatively massive so that velocity fluctuations are caused by collisions rather than the gas flow. This new model is applied to fully-developed, steady mixture flows down an inclined chute and the results are compared with other simulations. Our results show that the effect of the interstitial gas plays a significant role in modifying the characteristics of fully developed flow. Although the effect of the interstitial gas is less pronounced for large particles than small ones, the flowfields with large particles are still very different from granular flows which do not incorporate any interactions with the interstitial gas.     

颗粒物质在竖直管中下行蠕动流动的实验测量

颗粒流蠕动行为是颗粒物质在竖直管中流动时常见的一种流动现象,其产生机理较复杂。为此,本文在在内径为150mm、高为5000mm的竖直管实验装置上,以FCC催化剂为固体颗粒物料,采用PV6型颗粒速度测量仪,测量不同颗粒流率下竖直管中的颗粒下行蠕动流动速度以及颗粒固含率,系统地考察了颗粒物质在竖直管中下行流动时的蠕动流动特性及产生机理。实验结果表明,颗粒物质在竖直管中下行流动时的流动行为可划分为两种形式。在颗粒流率较小时,颗粒物质下行速度呈现脉冲式变化,有速度停滞,可称之为蠕动I型流动。随着颗粒流率的增加,颗粒下行速度停顿消失,但仍是起伏变化,为蠕动II型流动。当颗粒流率增大到一定值后,颗粒物质下行蠕动行为消失,转变为流化流动。颗粒物质下行的蠕动行为是出口区颗粒成拱与崩塌、颗粒与器壁滑动摩擦和颗粒力链作用的综合反映。     

Numerical simulations of wave interactions with vertical wave barriers using the SPH method

This paper focuses on the fluid boundary separation problem of the conventional dynamic solid boundary treatment (DSBT) and proposes a modified DSBT (MDSBT). Classic 2D free dam break flows and 3D dam break flows against a rectangular box are used to assess the performance of this MDSBT in free surface flow and violent fluid–structure interaction, respectively. Another test, water column oscillations in a U‐tube, is specially designed to reveal the applicability of dealing with two types of particular boundaries: the wet–dry solid boundary and the large‐curvature solid boundary. A comparison between the numerical results and the experimental data shows that the MDSBT is capable of eliminating the fluid boundary separation, improving the accuracy of the solid boundary pressure calculations and preventing the unphysical penetration of fluid particles. Using a 2D SPH numerical wave tank with MDSBT, the interactions between regular waves and a simplified vertical wave barrier are simulated. The numerical results reveal that the maximum horizontal force occurs at the endpoint of the vertical board, and with the enlargement of the relative submerged board length, the maximum moment grows linearly; furthermore, the relative average mass transportation under the breakwater initially increases to 11.14 per wave strike but is later reduced. The numerical simulation of a full‐scale 3D wave barrier with two vertical boards shows that the wave and structure interactions in the practical project are far more complicated than in the simplified 2D models. The SPH model using the MDSBT is capable of providing a reference for engineering designs. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of a filtered drag model considering effect of the solid shear rate

This study investigates a 2D gas–solid fast fluidized bed of typical Geldart A particles using highly resolved simulations with two-fluid model. The results show that the solid shear rate has a considerable impact on the orientation of the meso-scale structures and hence on the filtered drag force. On the basis of the correlation for the filtered drag force established in the literature using the traditional markers (such as filtered solid volume fraction, filtered slip velocity and filter scale), a correction correlated with the solid shear rate in the direction of gravity is proposed for better prediction of the filtered drag force. The corrected model is shown to produce improved results in posterior tests of flows in different fluidization regimes including bubbling, turbulent and fast fluidization.