Dynamic bending of a symmetric piezoelectric laminated plate with a through crack

The dynamic theory of linear piezoelectricity is applied to analyze the scattering of time harmonic flexural waves by a through crack in a symmetric piezoelectric laminated plate subjected to electric field loading. An incident wave giving rise to moments symmetric about the crack plane is considered. Piezoelectric layers are added to the upper and lower surfaces. Classical lamination theory is extended to include dynamic piezoelectric effects. Fourier transforms are used to reduce the problem to the solution of a pair of dual integral equations, the solution of which is then expressed in terms of a Fredholm integral equation of the second kind. The dynamic moment intensity factor vs. frequency is computed and the influence of the electric field on the normalized values is displayed graphically.     

Application of the modified method of multiple scales to solving the problem of a thin clamped circular plate of a very large deflection

In this paper,asymptotic behaviour of the solution to the problem of a thin clamped circular plate under uniform normal pressure at very large deflection is restudied by means of the modified method of multiple scales given in[1?].The result presented herein is in good agreement with the one obtained by professor Chien Wei-zang who first proposed the method of composite expansions to solve this problem in[3].However,by contrast,the advantage of the modified method of multiple scales it seems to be relatively simpler than the method used in[3].It is also shown that the restriction of the method of paper[1-2]pointed out in paper[4]is not essential,and several computation errors in[3]are corrected as well.     

冲击载荷作用下矩形薄板的弹性动力屈曲

为了研究冲击载荷作用下考虑应力波效应弹性矩形薄板的动力屈曲,根据动力屈曲发生瞬间的能量转换和守恒准则,导出板的屈曲控制方程和波阵面上的补充约束条件,真实的屈曲位移应同时满足控制方程和波阵面上的附加约束条件。满足上述条件,建立了该问题的完整数值解法,对屈曲过程中冲击载荷、屈曲模态和临界屈曲长度之间的关系进行研究,定量计算了横向惯性效应对提高薄板动力屈曲临界应力的贡献。研究表明：板的厚宽比一定时,临界屈曲长度随冲击载荷的增大而减小;由于屈曲时的横向惯性效应,应力波作用下薄板一阶临界力参数是相应边界板的静力失稳临界力参数的1.5倍;随着边界约束逐渐减弱,板临界力参数逐渐减小,动力特征参数逐渐增大。

     

APPLICATION OF THE MODIFIED METHOD OF MULTIPLE SCALES TO THE BENDING PROBLEMS FOR CIRCULAR THIN PLATE AT VERY LARGE DEFLECTION ANDTHE ASYMPTOTICS OF SOLUTIONS (Ⅰ)

In this paper, the modified method of multiple scales is applied to study the bending problems for circular thin plate with large deflection under the hinged and simply supported edge conditions. The series solutions are constructed, the boundary layer effects are analysed and their asymptotics are proved.     

APPLICATION OF THE MODIFIED METHOD OF MULTIPLE SCALES TO THE BENDING PROBLEMS FOR CIRCULAR THIN PLATE AT VERY LARGE DEFLECTION AND THE ASYMPTOTICS OF SOLUTIONS(Ⅱ)

This paper is a continuation of part (Ⅰ), on the asymptotics behaviors of the series solutions investigated in (Ⅰ). The remainder terms of the series solutions are estimated by the maximum norm.     

Non-linear response of a magneto-elastic translating beam with prismatic joint for higher resonance conditions

The non-linear response of a magneto-elastic translating beam having prismatic joint for higher resonance conditions is studied. A periodically varying transverse magnetic field is applied to the system. Two frequencies of prismatic motion and oscillating transverse magnetic field are implemented to the system. The method of multiple scales as one of the perturbation techniques is used to derive two first order ordinary differential equations that govern the time variation of the amplitude and phase of the response. Then a stability analysis is conducted for subharmonic resonance and simultaneous resonance conditions. A parametric study is performed to investigate the effect of magnetic field strength, amplitude of prismatic motion, damping and payload mass on the frequency response curves for both the resonance conditions. The catastrophic failure of the system may occur due to the presence of saddle-node and pitchfork bifurcations. The results obtained by method of multiple scales are compared with those obtained by numerically integrating the reduced equations and are found to be in good agreement. The developed results can be applied to control the vibration of a beam with prismatic joint subjected to magnetic field for third order subharmonic resonance and simultaneous resonance conditions.     

Principal parametric resonances of a slender cantilever beam subject to axial narrow-band random excitation of its base

The non-linear integro-differential equations of motion for a slender cantilever beam subject to axial narrow-band random excitation are investigated. The method of multiple scales is used to determine a uniform first-order expansion of the solution of equations. According to solvability conditions, the non-linear modulation equations for the principal parametric resonance are obtained. Firstly, The largest Lyapunov exponent which determines the almost sure stability of the trivial solution is quantificationally resolved, in which, the modified Bessel function of the first kind is introduced. Results show that the increase of the bandwidth facilitates the almost sure stability of the trivial response and stabilizes the system for a lower acceleration oscillating amplitude but intensifies the instability of the trivial response for a higher one. Secondly, the first and second order non-trivial steady state response of the system is obtained by perturbation method and the corresponding amplitude–frequency curves are calculated when the bandwidth is very small. Results show that the effective non-linearity of whether the amplitude expectation of the first order steady state response or the amplitude expectation of the second order steady state response is of the hardening type for the first mode, whereas for the second mode the effective non-linearity of whether the amplitude expectation of the first order steady state response or the amplitude expectation of the second order steady state response is of the softening type. Finally, the stochastic jump and bifurcation is investigated for the first and second modal parametric principal resonance. The basic jump phenomena indicate that, under the conditions of system parameters with a smaller bandwidth, the most probable motion is around the non-trivial branch of the amplitude response curve, whereas with a higher bandwidth, the most probable motion is around the trivial one of the amplitude response curve. However, the stochastic jump is sometimes more sensitive to the change of the bandwidth, in other words, a small change of bandwidth may induce a series of stochastic jump and bifurcation.     

参外联合激励下的簇发振荡及其机理

当周期激励频率远小于系统固有频率时,会存在快慢耦合效应,与单项激励不同,参外联合激励不仅会导致快子系统平衡曲线和分岔行为的复杂化,也会产生一些特殊的非线性现象,为此,本文以两耦合Hodgkin-Huxley细胞模型为例,引入周期参外联合激励,探讨在频域不同尺度耦合时该系统的簇发振荡的特点及其分岔机制．通过建立相应的快慢子系统,得到慢变参数变化下的快子系统的各种分岔模式以及相应的分岔行为,结合转换相图,揭示耦合系统随激励幅值变化时的动力学行为及其机理．研究表明,在激励幅值较小时,系统表现为概周期振荡,两频率分别近似于快子系统平衡曲线由Hopf分岔引起的两稳定极限环的振荡频率．概周期解随激励幅值的增加进入簇发振荡,导致这些簇发振荡的主要原因是在慢变参数变化的部分区间内,存在唯一稳定的平衡曲线,使得系统的轨迹逐渐趋向该平衡曲线,产生沉寂态,并随着慢变参数的变化,由分岔进入激发态．同时,快子系统中参与簇发振荡的稳定吸引子随激励幅值的变化也会不同,导致不同形式的簇发振荡．另外,与单项激励下的情形不同,联合激励时快子系统的部分稳定吸引子掩埋在其它稳定吸引子内,从而失去对簇发振荡的影响．     

负压爆炸载荷和数据采集间隔对弹性开孔板动应力集中的影响

基于ANSYS 7.0/LS-DYNA程序,对3 m3 m四边简支,厚度0.025 m,中心开有0.3 m0.3 m方孔的弹性板,在正压和负压三角爆炸载荷作用下的应力响应进行了分析,利用能量密度时间分布函数（TDFED）确定了动应力集中因子,并给出其计算步骤。计算结果表明计算总时间和数据采集时间间隔对动应力集中因子影响较大,而负压荷载影响较小。     

Nonlinear Vibrations of a Simply Supported Rectangular Metallic Plate Subjected to Transverse Harmonic Excitation in the Presence of a One-to-One Internal Resonance

The nonlinear response of rectangular and square metallic plates subjectto transverse harmonic excitations is studied. The nonlinearitiesoriginate from the use of Von Kármán strains. The method of multiplescales is used to solve the system of differential equationsapproximately. Frequency response curves are presented for both squareand rectangular plates for primary resonance of either mode in thepresence of a one-to-one internal resonance. Stability of steady statesolutions is investigated. Bifurcation points and their types arediscussed.     

Dynamic modelling and active vibration control of a submerged rectangular plate equipped with piezoelectric sensors and actuators

The active vibration control of a rectangular plate either partially or fully submerged in a fluid was investigated. Piezoelectric sensors and actuators were bonded to the plate, and the assumed mode method was used to derive a dynamic model for the submerged plate. The properties of the piezoelectric actuators and sensors, as well as their coupling to the structure, were used to derive the corresponding equations of their behaviour. The fluid effect was modelled according to the added virtual mass obtained by solving the Laplace equation. The natural vibration characteristics of the plate both in air and in water were obtained theoretically and were found to be consistent with the experimental results, and the changes in the natural frequencies resulting from submersion in fluid can be accurately predicted. A multi-input, multi-output positive position feedback controller was designed by taking the natural vibration characteristics into account and was then implemented by using a digital controller. The experimental results show that piezoelectric sensors and actuators along with the control algorithm can effectively suppress the vibration of a rectangular plate both in air and submerged in a fluid.     

BENDING SOLUTION OF A RECTANGULAR PLATE WITH ONE EDGE BUILT－IN AND ONE CORNER POINT SUPPORTED SUBJECTED TO UNIFORM LOAD

ＢＥＮＤＩＮＧ　ＳＯＬＵＴＩＯＮ　ＯＦ　Ａ　ＲＥＣＴＡＮＧＵＬＡＲ　ＰＬＡＴＥ　ＷＩＴＨ　ＯＮＥ　ＥＤＧＥ　ＢＵＩＬＴ－ＩＮ　ＡＮＤ　ＯＮＥ　ＣＯＲＮＥＲ　ＰＯＩＮＴ　ＳＵＰＰＯＲＴＥＤ　ＳＵＢＪＥＣＴＥＤ　ＴＯ　ＵＮＩＦＯＲＭ　ＬＯＡＤＸｕＱｉｌｏ...     

The Method of Multiple Scales Applied to the Nonlinear Stability Problem of a Truncated Shallow Spherical Shell of Variable Thickness with the Large Geometrical Parameter

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｆｉｅｌｄｏｆｐｒｅｃｉｓｉｏｎｉｎｓｔｒｕｍｅｎｔｅｎｇｉｎｅｅｒｉｎｇａｎｄａｒｃｈｉｔｅｃｔｕｒａｌｅｎｇｉｎｅｅｒｉｎｇ ,ｖｅｒｙｔｈｉｎｌｉｇｈｔｓｔｒｕｃｔｕｒｅｓｏｆｔｈｅｖａｒｉａｂｌｅｔｈｉｃｋｎｅｓｓｈａｖｅａｒｉｓｅｎｉｎｏｒｄｅｒｔｏｕｓｅｍａｔｅｒｉａｌｍｏｒｅｒａｔｉｏｎａｌｌｙ .Ｔｈｅｎ ,ｉｎｐｒａｃｔｉｃａｌｅｎｇｉｎｅｅｒｉｎｇ ,ｔｈｅｐｌｉａｂｌｅｓｈｅｌｌｏｆｎｏｎｕｎｉｆｏｒｍｔｈｉｃｋｎｅｓｓｗｉｔｈｔｈｅｌａｒｇｅｇｅ…     

横向爆炸载荷下开孔板的动应力集中因子

基于ANSYS 5.7/LS-DYNA程序,对3 m3 m0.25 m四边固支和简支、中心具有0.3 m0.3 m方孔的开孔板和无孔板对应点在两种下三角爆炸载荷作用下的应力响应进行了分析;由开孔板和无孔板边对应点的主应力时程曲线,对提出的能量密度时间分布函数的绝对值平方进行变上限积分,按其比值确定动应力集中因子,该方法简单易行。