Synthesis and Adsorption Property of Two Polymeric Adsorbents with Pendent Ether Bonds

Two polymeric adsorbents, poly(methyl p-vinylbenzvl ether) and oolv(ohenvl p-vinylbenzyl ether), were synthesized from chloromethylated polystyrene, Their adsorptionproperty for phenol in hexane solution was investigated. The results showed that the twoadsorbents adsorb phenol from hexane solution through hydrogen-bonding and π-π stacking interaction.     

Synthesis of Sulfated Polysaccharides and Oligosaccharide Derivatives with Potent Anti-Aids Virus Activity

Abstract

Sulfated synthetic polysaccharides (with both high anti-AIDS virus activity and high anticoagulant activity) were prepared by sulfating such synthetic polysaccharides as ribopyranan, ribofuranans, and dextrans. Sulfated natural polysaccharides with high anti-AIDS virus activity but low anticoagulant activity were synthesized from lentinan and curdlan. It is assumed that curdlan sulfate will be helpful as an AIDS drug. In addition, sulfated alkyl oligosaccharides with high anti-AIDS virus activity were prepared.     

Swelling behaviour of crosslinked hydrogels based on (2-hydroxyethyl methacrylate) with a zwitterionic comonomer (1-3-sulfopropyl-2-vinyl-pyridinium-betaine)

Copolymeric hydrogels were prepared by the chemically initiated free radical copolymerization in aqueous solution of mixtures of [1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (SPV) and (2-hydroxyethyl methacrylate) (HEMA) in the presence of a crosslinking agent N,N′-methylene-bis-acrylamide (MBA). The hydrogels were swollen to equilibrium in water and aqueous KSCN at 298 K and their swelling behaviour has been investigated using gravimetric measurements. The effects of the concentration of KSCN and the mole fraction of SPV in the feed (F_s) have been noted and discussed. The main findings are:(a) In water, the water content (W₁) of copolymeric hydrogels is insensitive to SPV content at F_s ? 0.45. In contrast, W₁ decreases sharply with decreasing F_s within the range of 0 < F_s < 0.45. (b) In aq. KSCN, the degree of total swelling (W) exceeds the value in pure water, the enhancement in swelling being most marked at low values of [KSCN]. The content of water within the hydrogel increases with KSCN concentration in the swelling medium for low values of [KSCN], but thereafter falls with further increase in salt concentration. In contrast, the salt content within the swollen hydrogel displays a continuous increase with increasing [KSCN]. All these results of item (b) are for copolymeric hydrogels within the full range of F_s (0 < F_s < 1). (c) at a fixed aq. KSCN concentration, both W and W₁ increase sharply with increasing F_s over the entire range of copolymer composition.     

接枝共聚法制备聚乙二醇(PEG)/聚乙烯醇(PVA)高分子固-固相变材料性能研究

用接枝共聚法将具有相变特征的聚乙二醇(PEG)接枝到具有较高熔点的聚乙烯醇(PVA)主链上,得到了系列性能稳定的PEG/PVA高分子固-固相转变材料,用DSC,WAXD和POM对其相变行为及形态结构进行了研究.结果表明,该材料呈现出可逆的固-固相转变特性;其结晶峰值温度和相变焓比纯PEG低,接枝率对相变温度和归一化相变焓影响不大;接枝率只影响结晶与熔融行为,不影响结晶结构.     

聚环氧乙烷无胶筛分毛细管电泳分离宽分子量范围DNA片段

在无胶筛分毛细管电泳中,以聚环氧乙烷为筛分介质,用硅烷化处理的毛细管柱（31.2 cm×75 μm有效长度21.0 cm）分离DL5000 DNA Marker（DNA长度为100~5000 bp）,研究筛分介质浓度、缓冲液pH、分离电压和溴化乙锭浓度对分离双链DNA片段的影响,优化出分离100~5000 bp DNA片段的最佳条件。毛细管电泳的最佳条件为PEO浓度0.5%、缓冲液pH值8.0、电压12 kV、溴化乙锭浓度3.0 μg/mL。此条件下,对山梨醇脱氢酶基因（SDH）和乙烯受体基因（ETR1）的聚合酶链式反应（PCR）扩增产物同时检测,分离、鉴定效果良好。     

Inverse Vulcanization of a Natural Monoene with Sulfur as Sustainable Electrochemically Active Materials for Lithium-Sulfur Batteries

A novel soluble copolymer poly(S-MVT) was synthesized using a relatively quick one-pot solvent-free method, inverse vulcanization. Both of the two raw materials are sustainable, i.e., elemental sulfur is a by-product of the petroleum industry and 4-Methyl-5-vinylthiazole (MVT) is a natural monoene compound. The microstructure of poly(S-MVT) was characterized by FT-IR, ¹H NMR, XPS spectroscopy, XRD, DSC SEM, and TEM. Test results indicated that the copolymers possess protonated thiazole nitrogen atoms, meso/macroporous structure, and solubility in tetrahydrofuran and chloroform. Moreover, the improved electronic properties of poly(S-MVT) relative to elemental sulfur have also been investigated by density functional theory (DFT) calculations. The copolymers are utilized successfully as the cathode active material in Li-S batteries. Upon employment, the copolymer with 15% MVT content provided good cycling stability at a capacity of ∼514 mA h g⁻¹ (based on the mass of copolymer) and high Coulombic efficiencies (∼100%) over 100 cycles, as well as great rate performance.     

新型X光显影含糖聚合物的合成与表征

用自由基本体聚合方法合成了一种新型的X光显影含糖三元共聚物P(2-IEMA-AcGEMA-MMA). 探讨了单体配比和链转移剂用量对聚合物分子量及其分布的影响, 并用FTIR, 1H NMR和GPC对其结构进行了表征. 研究结果表明, 改变单体配比对聚合物的分子量几乎不产生影响, 但减少链转移剂用量时, 可明显增加三元共聚物的分子量. 聚合物分子量分布一般在2~3之间, 符合自由基聚合产物分子量分布的一般规律. 聚合物具有良好的显影性, 显影效果随着样品厚度的增加而增强.     

一种新型的含联二萘结构的手性聚芳醚酮的合成及表征

目前,对于外消旋体的拆分已经越来越引起人们的关注,在药物化学领域中尤为突出,原因是手性药物的两个对映体虽然在物理和化学性质上大多相同,但其在药效及药物动力学方面却表现出很大的差别,目前尚没有通用的手性固定相用于外消旋体的拆分,为了解决这一问题,以淀粉、纤维素以及其衍生物制备的手性固定相已被人们广泛使用。     

Synthesis and Characterization of High Performance Poly(amide-imide)s based on a New Diimide-diacide and Various Diamines

A new diimide-diacid, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-1,3-bis(trimellitimidobenzene) (PPMIB), was synthesized from the condensation reaction of a new diamine, (4-(4-(2,6-diphenylpyridin-4yl)phenoxy)phenyl)-3,5-diaminobezamide (PPDA), and trimellitic anhydride carboxylic acid (TMAA) in glacial acetic acid. The diimide-diacid (PPMIB) was characterized by FT-IR, ¹H-NMR and elemental analysis. A series of novel aromatic poly(amide-imide)s (PAIs) was synthesized by using direct polycondensation of PPMIB with various diamines in NMP in the presence of triphenylposphite and pyridine as condensing agents. The resulting PAIs were amorphous, readily soluble in many polar aprotic solvents and showed inherent viscosities of 0.35–0.50 dL/g. According to thermal analysis, these polymers exhibited glass transition temperatures (T_gs) in the range of 202–280°C and temperature of 10% weight loss (T₁₀) varied from 400 to 545°C in N₂. These polymers in NMP solution exhibited strong UV-Vis absorption maxima at 320°C nm and their fluorescence emission peaks appeared around 410–565 nm.     

Self-cleaning and Oil/Water Separation of 3D Network Super-hydrophobic Bead-like Fluorinated Silica Pellets/Poly(aryl ether ketone) Composite Membrane Fabricated via a Facile One-step Electrospinning

Novel super-hydrophobic fluorinated silica pellets/poly(aryl ether ketone) composite membranes with controllable structure have been prepared through incorporating poly(aryl ether ketone)s with (3-trifluoromethyl)-phenyl side groups and fluorinated silica pellets(F-SiO₂) by a facile one-step electrospinning. Under the condition of adding 50%(mass fraction) F-SiO₂ in the composite membrane, the water contact angle(WCA) reached its maximum (157°±4.3°). The controllable micro/nano-structures grown on the electrospun fibers could be regulated by the F-SiO₂ loading, which was illustrated by scanning electron microscopy(SEM). Moreover, these super-hydrophobic membranes also demonstrated excellent durability, anti-fouling property and oil-water separation ability after 200 h of water flushing. These promising PAEK composite membranes with controllable structure have the potential values in large-scale application of filtration, oil-water separation and antifouling.     

Preparation and characterization of a series of poly(acrylamide-co-acrylates), with a copolymer composition between 0–96.3 mol-% acrylate units with the same degree and distribution of polymerization

A series of linear poly(acrylamide-co-acrylates) (PAAm/AAcNa) has been prepared covering a copolymer composition between 0 and 96.3 mol% acrylate units, which have the same degrees of polymerization and chain length distributions. Measurements of viscosity and light scattering have proven that maximum coil dimensions of PAAm/ AAcNa in salt solutions are achieved at about 67 mole-% AAcNa. This so-called maximum behaviour was researched by measuring the radius of gyration, second virial coefficient, molecular weight, preferential solvation, viscosity and absorption bands of the copolymer series. Thus, an increase in the possible ways of arranging AAcNa-AAm-AAcNa units (via H-bonds) will lead to extended coil dimensions and therefore influence the viscosity. In addition, it can therefore be concluded from all these results that the maximum behaviour is real and not influenced by the different distributions of the samples. The copolymer composition can be easily determined by infra-red spectroscopy by use of a proposed relation.Abbreviations A₂ second virial coefficient (mole · cm³ · g^–2) - AAm acrylamide - AAcH acrylic acid - AAcNa sodium acrylate - c polymer concentration (g · cm^–3) - salt concentration (g · cm^–3), (Val · cm^–3) - C _LS critical concentration obtained by light scattering (g · cm^–3) - d _[] viscosity equivalent diameter of a sphere (nm) - E extinction - FW _s formula weights of salt - g _s gram of salt - g _p gram of polymer - GuaCl guanidinium chloride - h ^21/2 root mean square end-to-end distance (nm) - K optical constant for unpolarized incident light (mole · cm² · g^–2) - M molarity (mole · 1^–1) - M _w weight average molecular weight (g · mole^–1) - N _L Avogadro constant 6.023 · 10²³ mole^–1 - P _n number average degree of polymerization - P _w weight average degree of polymerization - PAAm poly(acrylamide) - PAAcH poly(acrylic acid) - PAAcNa poly(sodium acrylate) - PAAm/AAcNa poly(acrylamide-co-sodium acrylate) - R _[] Rayleigh ratio of the scattering at angle (cm^–1) - R _G ² _Z ^1/2 root mean square average radius of gyration (nm) - R _[] viscosity equivalent radius of a sphere (nm) - T temperature (°C), (K) - u excluded volume (cm³ · g^–1) - V molar volume (cm³ · mole^–1) - V _s partial specific volume - X mole fraction - (NH₂) oscillation of deformation - extinction coefficient - ₀ zero shear viscosity (Pa · s), (mPa · s) - _red reduced viscosity (cm³ · g^–1) - [] intrinsic viscosity (cm³ · g^–1) - _a constant of preferential solvation (g · g^–1) - ₀ wavelength of light in vacuo (nm) - chemical potential - v _as stretching vibration - scattering angle (°)     

Development and validation of a hydrophilic interaction chromatography-tandem mass spectrometry method with on-line polar extraction for the analysis of urinary nucleosides. Potential application in clinical diagnosis

The present paper describes the development, validation and application of a quantitative method for the determination of endogenous nucleosides and nucleobases in urine based on the on-line coupling of a solid-phase extraction step with hydrophilic interaction chromatography-tandem mass spectrometry. The method combines the use of a highly polar restricted-access material (RAM), based on an N-vinylacetamide copolymer, for efficient analyte extraction and matrix removal, with separation by zwitterionic hydrophilic interaction chromatography (ZIC-HILIC), that revealed a satisfactory retention of the polar analytes studied. Detection using a triple quadrupole analyser allowed reliable identification and high-sensitivity quantitation of the target compounds. The on-line configuration developed, RAM-ZIC-HILIC-MS/MS, provides a convenient approach to automate the application to urine analysis, with minimum sample manipulation. The whole method was validated according to European Legislation for bioanalytical methods. The validation steps included the verification of matrix effects, calibration curve, precision, accuracy, selectivity, stability and carry-over in real samples. The results of the validation process revealed that the proposed method is suitable for the reliable determination of nucleosides and nucleobases in human urine, showing limits of detection from 0.1 to 1.3 ng mL(-1). The application to clinical samples was also checked; the results obtained in analyses of urine samples from healthy volunteers and cancer patients using Principal Component Analysis, Hierarchical Cluster Analysis and Soft Independent Modeling of Class Analogy are also shown.     

Adsorption of lysozyme on a hemodialysis sulfonated polyacrylonitrile membrane, with and without preadsorbed poly(ethyleneimine) on the external faces

We present the influence of pH, from pH 4 to 10, with a focus on the neutral range, on the adsorption of lysozyme (isoelectric point pI=11) on a sulphonated membrane and the same membrane pre-treated with poly(ethyleneimine) (PEI). We found a steep increase of the adsorbed amount above pH 6 in phosphate buffer. The adsorbed amount was about twice as low in Tris buffer, around the neutral pH. The difference between the two types of buffer is attributed to their different ionic composition. High interfacial concentration in phosphate buffer is especially linked to the phosphate divalent anions. In the presence of divalent sulphate anions, we measured the same level of interfacial concentration than with phosphate buffer. With the PEI pre-treated membrane, we observed, on the time scale of our experiments (15–20 h), similar adsorbed amounts than on the raw membrane, showing that the PEI layer does not constitute a true barrier to the penetration of lysozyme into the membrane core. However, its presence leads to a slower adsorption rate in a system where convection does not occur through the membrane.     

Crystallization kinetics and morphology of biodegradable poly(lactic acid) with a hydrazide nucleating agent

The effect of tetramethylenedicarboxylic dibenzoylhydrazide (designated here as TMC) on the nonisothermal and isothermal crystallization behavior of PLA was investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide angle X-ray diffraction (WAXD). TMC shows excellent nucleating effect on PLA. With the addition of 0.05 wt% TMC, the crystallization half-time of PLA decreases from 26.06 to 6.13 min at 130 °C. The isothermal crystallization data were further analyzed by the Avrami model. The values of the Avrami exponent of the blends are comparable to that of neat PLA, indicating that the presence of TMC does not change the crystallization mechanism of the matrix. The observation from POM and WAXD measurements showed that the presence of TMC increases significantly the nuclei density of PLA but has no discernible effect on its crystalline structure.     

Charge Separation in Excited States of Decoupled Systems—TICT Compounds and Implications Regarding the Development of New Laser Dyes and the Primary Process of Vision and Photosynthesis

The understanding of the dual fluorescence of certain aromatic systems has greatly advanced in recent years. The accompanying large charge separation has been shown to be linked to a twisted (or small overlap) arrangement of the chromophores. Recent theoretical models are able to describe the excited-state twisting of both single bonds (TICT compounds) and double bonds (olefins) in a unified picture. These models can help to elucidate the photophysical behavior of many organic, inorganic, and biologically relevant compounds, and their application to laser dyes and fluorescent probes provides a route to new “tailor-made” fluorescent materials. Applied to the primary processes of vision and photosynthesis, these models can lead to a deeper understanding of basic photobiological processes.     

新型低介电常数聚芳醚酮的合成及性能研究

近年来,随着对高分子材料功能化研究的深入,合成了许多具有特殊性能的聚芳醚酮．聚芳醚酮是一类综合性能优异的半结晶性特种工程塑料,在分子链中引入氟官能团可降低聚合物的介电常数．然而,不对称强极性氟的引入增加了聚合物分子的极性,不利于进一步降低介电常数,且在高温加工时容易放出氟化氢．因此,无氟、低氟的低介电高分子材料将会有很好的发展前景．     

塑料芯片毛细管电泳电化学检测系统及其性能评价

近年来,高分子芯片毛细管电泳技术发展迅速,以聚甲基丙烯酸甲酯(PMMA)为代表的塑料电泳芯片由于其低廉的制作成本与良好的电渗性能,已经成为芯片电泳技术发展的一个重要方向,电化学检测具有灵敏度高、选择性好和易于微型化等优点,因此在塑料芯片电泳领域中具有较好的应用前景。     

Direct measurement of gas solubility and diffusivity in poly(vinylidene fluoride) with a high-pressure microbalance

We present solubility and diffusion data for the gases methane and carbon dioxide in the polymer poly(vinylidene fluoride). The polymer was cut from extruded piping intended for use in offshore oil and gas applications. Measurements were carried out using a purpose-built high-pressure microbalance. These properties were determined in the temperature range 80-120 °C and in the pressure range 50-150 bar for methane and 20-40 bar for carbon dioxide. In general, good agreement was obtained for similar measurements reported in the literature. Solubility follows a Henry’s law (linear) dependence with pressure. Diffusion coefficients for each of the gases in the polymer were also measured using the balance. Activation energies for diffusion and heats of solution for the two gases in the polymer were also determined.     

Suspension polymerization of poly(ethylene glycol) methacrylate: a route for swellable spherical gel beads with controlled hydrophilicity and functionality

 Spherical and swellable gel beads were obtained by the suspension polymerization of poly(ethylene glycol) methacrylate macromonomer (PEG-MA). The average size and size distribution properties, the equilibrium swelling behaviour and the protein adsorption characteristics of PEG-MA-based gel beads were determined. In the suspension polymerization system, the organic phase including monomer, cross-linker and diluent solution was dispersed in an aqueous medium by using poly(vinylpyrrolidone) as the stabilizer. The diluent solution was prepared by mixing cyclohexanol and octanol at different volume ratios. The suspension polymerization experiments were designed in two separate parts. In the first part, ethylene glycol dimethacrylate was selected as the cross-linker and swellable PEG-MA-based gel beads were obtained by changing the cross-linker concentration, the monomer/diluent ratio and the stirring rate. In the second part, a more hydrophobic structure, divinylbenzene (DVB) was tried as a cross-linker. In this part, PEG-MA-DVB copolymer beads were obtained by changing the DVB/PEG-MA feed ratio. Then, the hydrophicility of the resulting gel beads could be controlled by changing the feed ratio of hydrophilic macromonomer to hydrophobic cross-linker. This property was also used to control the extent of nonspecific protein adsorption onto the surface of the gel beads. The non specific albumin adsorption onto the gel beads decreased with increasing PEG-MA content. No significant nonspecific adsorption at the isoelectric point of albumin was detected onto the gel beads produced with the higher PEG-MA/DVB feed ratios. For specific albumin adsorption, a triazinyl dye (i.e., cibacron blue, CB F3G-A) was covalently attached onto the surface of the copolymer beads via terminal hydroxyl groups of PEG-MA. The results of albumin adsorption experiments with the CB F3G-A carrying beads indicated that an appreciable specific albumin adsorption capacity could be obtained with the gel beads produced with a PEG-MA/DVB feed ratio of 1.5/4.0. Received: 16 August 1999/Revised: 27 December 1999     

Synthesis,Characterization and Application of Poly(lactic-co-glycolic acid) with a Mass Ratio of Lactic to Glycolic Segments of 52/48

Poly(lactic-co-glycolic acid)(PLGA) is one of the most representative degradable copolymers and promising drug carriers. In the current paper, the PLGAs with a lactic acid/ glycolic acid(LA/GA) molar ratio of 52/48 and various molecular weights were prepared by a melting method. The molecular weight, molecular weight distribution, and thermal stability were determined by ¹H NMR and thermogravimetric analysis methods. The results demonstrated that PLGAs with the fixed LA/GA molar ratio(52/48), different molecular weights, and narrow molecular weight distribution could be obtained by solely altering the reaction time. The PLGA films were prepared, and their properties including micro-structure, mechanical property, in-vitro cytotoxicity, and biodegradability were characterized. In combination with the homogeneous microstructures and mechanical properties, the drug-loading and releasing properties of PLGA_3.2 films were investigated. The results show that PLGA_3.2 film with an LA/GA molar ratio of 52/48 is a promising curcumin carrier.