Complete basis set ab initio computational study of three-dimensional aromaticity in highly symmetric hydrogen clusters

The aromaticity of planar and highly symmetric three-dimensional hydrogen clusters were evaluated with the complete basis set ab initio computational method. The energy of formation of the hydrogen clusters from the hydrogen molecule and hydrogen molecular ions were used in comparison to their relative stabilities. The aromaticity of planar hydrogen clusters, as well as hydrogen clusters in the three dimensions, arranged as highly symmetric regular polyhedra (Plato's polyhedras), were discussed with respect to the Hückel and Möbius aromatic rules.     

Study of the selective catalysis of metalloporphyrins for 2-methyl-butane oxidation with PhIO under mild conditions

Nine ironporphyrins and eight manganeseporphyrins were synthesized, and their selective catalysis for the oxidation of the secondary and tertiary carbon–hydrogen bonds of 2-methyl-butane with PhIO was studied. The proportion of the oxidation product of tertiary carbon–hydrogen bond to the one of secondary carbon–hydrogen bond was 3:1 when ironporphyrins were used as catalysts, and 2.3:1 when manganeseporphyrins were used as catalysts. The research showed that the substituting groups on the porphyrin rings influenced the catalytic selectivity of metalloporphyrins for the oxidation of the secondary and tertiary carbon–hydrogen bonds as well as the reaction yields. The electron-attracting groups on benzene rings of ironporphyrins increased the catalytic selectivity of ironporphyrins for the tertiary carbon–hydrogen bond oxidation and the reaction speeds, and the electron-releasing groups increased the catalytic selectivity for secondary carbon–hydrogen bond oxidation and reduced the reaction speeds. Both electron-attracting and -releasing groups on benzene rings of manganeseporphyrins enhanced the catalytic selectivity of manganeseporphyrins for the secondary carbon–hydrogen bond oxidation.     

Effect of hydrogen on the γ-radiation-induced polymerization of ethylene

The effects of hydrogen on the γ-radiation-induced polymerization of ethylene were studied from the viewpoint of polymer structure and kineties. All experiments were carried out at 30°C. In the polymerization of ethylene containing 21.6% hydrogen, the solid polymer was obtained as a main product, while no liquid product was found. There was no difference in hydrogen contents before and after the irradiation; and acetylene, ethane, butane, and butene-1 were found as gaseous products. The polymer yield increased almost proportionally with dose rate in the presence of 8.0% hydrogen; on the other hand the molecular weight was independent of dose rate. At hydrogen contents of 0–8%, the polymerization rate increased with reaction time and decreased with hydrogen content. The molecular weight also increased with the time, and the extent of the increment decreased with the time and hydrogen content. The number of moles of polymer chain increased proportionally with the reaction time and increased linearly with hydrgen concentration. These results were analyzed by using a graphical evaluation method for kinetics, and the effects of hydrogen on the each elementary step in the polymerization were discussed.     

超临界状态下炭基材料的储氢

评介了目前各种储氢方法，指出了炭基材料作为储氢材料的优势，综述了近年来纳米炭材料在储氢方面的进展，详细探讨了超临界状态下氢气在纳米孔隙中的吸附机理，并在此基础上提出了研究中的问题及进一步的研究方向。     

NdFeB合金吸氢过程的研究

氢破碎工艺作为烧结钕铁硼永磁体制作过程中铸锭粗破碎的新工艺, 具有使主相破碎成单晶的独特优点. 为了优化氢破碎工艺, 主要研究了铸锭表面积、温度和钕含量对钕铁硼铸锭发生破碎的吸氢孕育期、平均吸氢量和吸氢速度的影响. 结果发现, 表面积增大, 吸氢孕育期缩短. 温度提高, 孕育期缩短, 吸氢速度加快, 平均吸氢量稍有变化, 这主要是因为温度的提高, 增加氢扩散速度所致. 而提高钕含量, 孕育期同样缩短, 吸氢速度加快, 平均吸氢量增大, 这与富钕相的增多有关. 并且, 可以通过吸氢量来计算铸锭中富钕相的含量.     

述评碳纳米管储氢研究*

碳纳米管因被认为可能是氢能的主要载体而备受关注,但几年来的文献报道不尽一致.本文评述了关于单壁和多壁碳纳米管对氢气的吸附实验和模拟计算研究结果,探讨了碳纳米管作为储氢材料的可行性.     

氨基硼烷化合物的合成及应用研究进展

氨基硼烷化合物近年来在储氢材料的开发以及在有机合成中的应用非常广泛。本文综述了氨基硼烷的合成及其作为储氢材料的研究进展,以及近十几年来氨基硼烷在有机合成中作为还原试剂、在不对称还原反应中作手性催化剂及其他反应中的应用研究进展。指出加入金属氢化物制备的金属氨硼烷具有较优的放氢性能、可再生氨硼烷储氢材料的开发和制备是储氢材料新的发展方向;发展清洁高效的绿色还原体系和高选择性的手性氨硼烷催化剂是氨硼烷研究领域的新热点;氨硼烷试剂在储氢材料开发和绿色还原试剂领域具有潜在的实际应用价值。     

气相色谱-质谱联用分析5种有机磷农药时氢气代替氦气作为载气的可行性考察

迄今为止,氦气几乎是气相色谱-质谱联用仪运行中唯一可选的载气.本文使用气相色谱-质谱联用仪考察了氢气和氦气分别作为载气时,对5种有机磷农药混合标准溶液的检测,以确定氢气代替氦气作为气相色谱-质谱联用仪载气用于有机磷农药分析的可行性.用工作站自带解卷积软件(自动质谱解卷积鉴定系统,AMDIS32),结合自建"有机农药质谱库"对结果进行了解析,而后用SPSS统计软件对数据进行了聚类分析.结果发现,以氢气为载气时虽然出峰稍快,但色谱峰分离度较低,解良度较低,且待测物信号不稳定,测定准确度较低,有些化合物甚至检测不到.因此以氢气为载气分析有机磷农药时应对测定准确度、信号稳定性、安全性等诸多因素进行慎重考虑.     

大孔交联聚(对乙烯基苄基苯胺)树脂对苯酚的吸附

由氯甲基化聚苯乙烯合成了大孔交联聚(对乙烯基苄基苯胺)树脂, 测定了其对正己烷和水中苯酚的吸附等温线, 计算了吸附焓. 结果表明, 苯胺基树脂主要是通过氢键吸附正己烷中苯酚的, 树脂负载的功能基氮原子和苯环都作为氢键受体与苯酚的羟基氢原子形成氢键, 而其对水中苯酚的吸附是基于氢键和疏水作用.     

The protective function of hydrogen sulfide for lysozyme against riboflavin-sensitized photo-oxidation

Hydrogen sulfide is the third endogenous signaling gasotransmitter, following nitric oxide and carbon monoxide. Recent studies showed that hydrogen sulfide could alleviate many diseases which were related to the oxidative damage of tissues. It reminded us that hydrogen sulfide might serve as an antioxidant to reduce oxidative pressure. This study showed that hydrogen sulfide protected lysozyme from photo-oxidation induced by riboflavin (RF). Laser flash photolysis was used to explore the mechanisms of antioxidant activity of hydrogen sulfide. The scavenging effects of hydrogen sulfide on the triplet state of riboflavin (3RF(*)) and radicals of tryptophan and tyrosine (TyrO· and TrpN·) were attributed to the protection of lysozyme from photo-oxidation. The results suggested that hydrogen sulfide could serve as an antioxidant in alleviation of oxidative pressure.     

Adsorption dynamics of hydrogen sulfide in impregnated activated carbon bed

Potassium iodide (KI) impregnated activated carbons were prepared and applied for the removal of hydrogen sulfide. The adsorption dynamics of the prepared adsorbents were investigated in fixed-bed column as functions of the concentration of hydrogen sulfide and oxygen, and relative humidity. It was found that the adsorption capacity was highly dependent on the oxygen concentration because of the chemical adsorption of hydrogen sulfide on KI impregnated activated carbon. The adsorbents before and after adsorption of hydrogen sulfide were characterized by BET, SEM and EDS analysis.     

生物油水溶性组分的水蒸气催化重整制氢实验研究

利用固定床反应器对生物油水溶性组分重整制氢反应进行了考察,研究了温度、吸收剂的加入对反应过程的影响。结果表明,在常压条件下生物油水溶性组分的最佳重整温度为800℃,此时H2体积分数为60%、CO体积分数为10%。加入CO₂吸收剂后,H₂体积分数提高了25%,H₂产率提高了10%。在常压条件下,以CaO作为吸收剂时,最佳的反应温度为600℃,此时H₂体积分数最高可达85%。650℃时CaO对CO₂的吸收能力减弱导致其对生成H₂反应的促进作用急剧降低。     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

Hydrogen storage in ni nanoparticle-dispersed multiwalled carbon nanotubes

Hydrogen storage properties of mutiwalled carbon nanotubes (MWCNTs) with Ni nanoparticles were investigated. The metal nanoparticles were dispersed on MWCNTs surfaces using an incipient wetness impregnation procedure. Ni catalysts have been known to effectively dissociate hydrogen molecules in gas phase, providing atomic hydrogen possible to form chemical bonding with the surfaces of MWCNTs. Hydrogen desorption spectra of MWCNTs with 6 wt % of Ni nanoparticles showed that approximately 2.8 wt % hydrogen was released in the range of 340-520 K. In Kissinger's plot to evaluate the nature of interaction between hydrogen and MWCNTs with Ni nanoparticles, the hydrogen desorption activation energy was measured to be as high as approximately 31 kJ/mol.H(2), which is much higher than the estimates of pristine SWNTs. C-H(n)() stretching vibrations after hydrogenation in FTIR further supported that hydrogen molecules were dissociated when bound to the surfaces of MWCNTs. During cyclic hydrogen absorption/desorption, there was observed no significant decay in hydrogen desorption amount. The hydrogen chemisorption process facilitated by Ni nanopaticles could be suggested as an effective reversible hydrogen storage method.     

Utilization of Low-grade Iron Ore in Ammonia Decomposition

Due to its cleanliness, fast energy cycle, and convenience of energy conversion, hydrogen has been regarded as the new energy source. Conventional process to produce hydrogen yield large amount of CO as byproduct. Moreover, the hydrogen storage and transportation have become the drawbacks in hydrogen economy. Thus, there has been increased interest in the hydrogen transportation medium as alternatives from the conventional process to produce and transport hydrogen. Ammonia has drawn worldwide attention as the most reliable hydrogen transportation medium. Through the decomposition of ammonia, hydrogen and nitrogen gas were produces as the byproduct without any CO or CO₂ emission. In this experiment, the ore were introduced as the medium for ammonia decomposition. The ore were put into quartz tube reactor and were dehydrated at 400 °C for 1 hour, then hydrogen reduced for 2 hours before and undergone ammonia decomposition at 500-700 °C for 3 hours. The effects of temperature to the % conversion of ammonia decomposition were also studied. Ammonia decomposition at higher temperature gives higher conversion. As seen in the results, the NH₃ conversion decreased with increasing time and the value after 3 hours of reaction increased in the sequence of 500 °C<600 °C< 700 °C. During ammonia decomposition, nitriding of iron occurred. The relation between temperature and the nitriding potential, K_N is also investigated. The purpose of this study is to investigate the utilization of low-grade ore as medium for ammonia decomposition to produce hydrogen.     

Hydrogen generation from steam reforming of ethanol in dielectric barrier discharge

Dielectric barrier discharge (DBD) was used for the generation of hydrogen from ethanol reforming. Effects of reaction conditions, such as vaporization temperature, ethanol flow rate, water/ethanol ratio, and addition of oxygen, on the ethanol conversion and hydrogen yield, were studied. The results showed that the increase of ethanol flow rate decreased ethanol conversion and hydrogen yield, and high water/ethanol ratio and addition of oxygen were advantageous. Ethanol conversion and hydrogen yield increased with the vaporization room temperature up to the maximum at first, and then decreased slightly. The maximum hydrogen yield of 31.8% was obtained at an ethanol conversion of 88.4% under the optimum operation conditions of vaporization room temperature of 120 ?C, ethanol flux of 0.18 mL/min, water/ethanol ratio of 7.7 and oxygen volume concentration of 13.3%.     

Storage of hydrogen at 303 K in graphite slitlike pores from grand canonical Monte Carlo simulation

Grand canonical Monte Carlo (GCMC) simulations were used for the modeling of the hydrogen adsorption in idealized graphite slitlike pores. In all simulations, quantum effects were included through the Feynman and Hibbs second-order effective potential. The simulated surface excess isotherms of hydrogen were used for the determination of the total hydrogen storage, density of hydrogen in graphite slitlike pores, distribution of pore sizes and volumes, enthalpy of adsorption per mole, total surface area, total pore volume, and average pore size of pitch-based activated carbon fibers. Combining experimental results with simulations reveals that the density of hydrogen in graphite slitlike pores at 303 K does not exceed 0.014 g/cm(3), that is, 21% of the liquid-hydrogen density at the triple point. The optimal pore size for the storage of hydrogen at 303 K in the considered pore geometry depends on the pressure of storage. For lower storage pressures, p < 30MPa, the optimal pore width is equal to a 2.2 collision diameter of hydrogen (i.e., 0.65 nm), whereas, for p congruent with 50MPa, the pore width is equal to an approximately 7.2 collision diameter of hydrogen (i.e., 2.13 nm). For the wider pores, that is, the pore width exceeds a 7.2 collision diameter of hydrogen, the surface excess of hydrogen adsorption is constant. The importance of quantum effects is recognized in narrow graphite slitlike pores in the whole range of the hydrogen pressure as well as in wider ones at high pressures of bulk hydrogen. The enthalpies of adsorption per mole for the considered carbonaceous materials are practically constant with hydrogen loading and vary within the narrow range q(st) congruent with 7.28-7.85 kJ/mol. Our systematic study of hydrogen adsorption at 303 K in graphite slitlike pores gives deep insight into the timely problem of hydrogen storage as the most promising source of clean energy. The calculated maximum storage of hydrogen is equal to approximately 1.4 wt %, which is far from the United States Department of Energy (DOE) target (i.e., 6.5 wt %), thus concluding that the total storage amount of hydrogen obtained at 303 K in graphite slitlike pores of carbon fibers is not sufficient yet.     

Effect of Acute Exposure to Hydrogen Peroxide on the Production of Phytoplankton and Bacterioplankton in a Mesohumic Lake

Abstract— Active oxygen species such as hydrogen peroxide are produced as a result of UV radiation interaction with natural organic matter and can build up to high concentrations in many aquatic environments. Although the resulting oxidizing potential may affect biological materials and processes, the ecological effects have not yet been studied in any detail. We examined the influence of hydrogen peroxide exposure on phytoplankton and bacterioplankton production in Lac Cromwell, a small humic lake in the Laurentian Hills (Quebec, Canada). A range of hydrogen peroxide concentrations were added to natural samples that were incubated in situ; results indicate that even small amounts of added hydrogen peroxide (50 n M inhibited bacterial production in this lake. A 100 n M addition inhibited bacteria by as much as 40%. On the other hand, low concentrations of added hydrogen peroxide usually stimulated photosynthesis. Catalase addition to eliminate hydrogen peroxide from water usually stimulated bacterial production but had no effect on algal carbon fixation. If these results represent true changes in growth rate, they indicate very different sensitivities of phytoplankton and bacteria to oxidative stress.     

氢对气相甲醇羰基化催化体系的影响

 主要讨论了氢对甲醇气相羰基化催化体系的影响．采用多孔碳化聚偏二氯乙烯小球负载金属镍催化体系，在不同进气条件下进行甲醇羰基化反应，得到不同氢含量时催化剂的活性和稳定性数据，以及氢对催化体系的微扰数据，并对催化剂的表面形态用SEM进行了表征，以评价氢的影响．从三个方面分析了氢对气相甲醇羰基化催化体系的影响，认为适量存在的氢对长时间保持催化剂活性是有利的．     

Rapid Evaluation of Individual Hydrogen Bonding Energies in Linear Water Chains

A model is proposed to rapidly evaluate the individual hydrogen bonding energies in linear water chains. We regarded the two O--H bonds of a water molecule as two dipoles. The magnitude of the O--H bond dipole mo- ment can be varied due to the other water molecules＇ presence. An analytic potential energy function, which explicitly contains the permanent dipole-dipole interactions, the polarization interactions, the van der Waals interactions and the covalent interactions, was therefore established. The individual hydrogen bonding energies in a series of linear water chains were evaluated via the analytic potential energy function and compared with those obtained from the CP-corrected MP2/aug-cc-pVTZ calculations. The results show that the analytic potential energy function not only can produce the individual hydrogen bonding energies as accurately as the CP-corrected MP2/aug-cc-pVTZ method, but is very efficient as well, demonstrating the model proposed is reasonable and useful. Based on the individual hy- drogen bonding energies obtained, the hydrogen bonding cooperativity in the linear water chains was explored and the natures of the hydrogen bonding in these water chains were discussed.