水热裂解开采稠油技术研究的进展

从水热裂解反应、催化作用下的水热裂解反应、反应机理及水热裂解开采稠油现场应用实验等四个方面综述了国内外水热裂解开采稠油技术的研究进展。并对此技术的研究成果及未来发展进行了探讨，认为水热裂解开采稠油技术具有很高的潜在价值，是未来经济高效开采稠油的新途径。当前水热裂解开采稠油技术的主要研究方向是深入研究高温水的特性及其作用；对更多稠油中可能参与水热裂解反应的不同组分，选用合适的模型化合物进行模拟实验或其它方法，建立这些组分的反应热力学和动力学模型库；然后，根据具体稠油中所含的组分，设计水热裂解反应的路线，选择合适的催化剂，促使反应向稠油改质降粘的方向进行。其中，最关键的还是针对不同稠油研制成本低、活性和选择性高、反应条件宽的催化剂，并筛选或研制协同效果好的助剂，进而研究催化剂及其助剂在油层中与稠油作用的机理，设计合理的现场实施技术和工艺。     

蒸气开采过程中金属盐对稠油粘度及平均分子量的影响

探讨了在注蒸气条件下，稠油的粘度和平均分子量随蒸气温度、反应时间的变化规律，研究了金属盐、油层矿物对稠油水热裂解反应的影响。实验结果表明，在注蒸气的条件下，辽河稠油可以发生水热裂解反应。金属盐的存在，可以加速稠油的水热裂解反应，从而导致粘度和平均分子量的进一步降低，使稠油的粘度由原始的124.5 Pa·s下降到32.4 Pa·s，下降了74.0%，平均分子量由反应前的654下降到398。高温下油层矿物对水热裂解反应有促进作用，在反应体系中，在有水时加入质量分数为10%的油层矿物时，稠油的粘度由原始的124.5 Pa·s下降到82.5 Pa·s，下降了33.7%。在蒸气条件下，在金属盐和油层矿物共存时，稠油粘度由124.5 Pa·s下降到26.8 Pa·s，下降了78.5%。这为实现井下催化降粘开采稠油提供了理论依据。     

水溶性有机钴(Ⅱ)盐催化的稠油低温清洁水热裂解

为了开发新型稠油低温清洁水热裂解催化体系,合成了系列钴盐催化剂,用于低温下催化稠油热裂解,利用高温高压反应釜模拟井下热采条件,在反应温度为180℃、反应时间为24h、催化剂Co-3加量为0.5%,稠油降黏率可达到84.5%.稠油组分分析表明:水热裂解催化反应后,胶质、沥青质等重质组分含量减少;TGA和GC显示稠油经水热催化裂解反应后,轻质组分含量明显增加.     

超声波辅助稠油层内催化水热裂解实验研究

将超声波应用到稠油催化水热裂解实验中,研究了超声波辅助催化水热裂解对胜利油田孤东稠油物化性质的影响。结果表明,超声波辅助作用下稠油的降黏率达到86.2%,与催化水热裂解相比,稠油的平均相对分子质量进一步减小,饱和烃和芳香烃组分含量增加,胶质和沥青质组分含量减少,稠油组分的氢碳原子比增加,杂原子含量减小。动态模拟实验中超声波辅助层内催化水热裂解效果显著,稠油采收率达到53.91%,降黏率达到80.5%。由此表明,超声波辅助催化水热裂解具有可行性,超声波与催化剂协同作用促进了水热裂解反应,一定程度上改善了稠油的品质。     

自由基引发剂强化稠油催化水热裂解降黏行为

本文考察了自由基引发剂对胜利油田单56区块稠油样品催化水热裂解反应过程的协同强化作用.在反应温度为220℃,添加0.2 wt%的引发剂——过氧化二叔丁基,使水热裂解后的降黏率由不加引发剂时的61.4%升高到72.7%.此外,在引发剂存在、150℃条件下,降黏率可达到69.0%,表明引发剂的加入可显著提高较低反应温度下的水热裂解效果.对反应前后油样进一步分析发现,反应样品中饱和分、芳香分、胶质和沥青质平均分子量均下降;饱和分、芳香分含量增加,而胶质、沥青质含量下降;胶质、沥青质中氢碳原子比增加,含硫量减少,含氮量变化不大;表明重质组分在水热裂解过程中发生了裂解反应、尤其是含硫官能团在水热裂解中发生了反应;反应样品沥青质及胶质芳香环系的缩合程度降低.实验结果表明,反应过程中稠油重质组分发生了裂解,而且胶质的裂解程度更大,轻质组分含量增加,导致稠油黏度降低、流动性提高,在一定程度上改善了稠油的品质;引发剂可以在较低温度下产生自由基,从而使水热裂解反应在较低反应温度下有效进行.     

稠油催化裂解前后咔唑类化合物的变化及其催化降黏机理的研究

在稠油族组成分离中,采用低毒试剂正己烷、二氯甲烷、无水乙醇及其混合溶剂,将反应前后已除去沥青质的稠油分离为饱和烃、芳烃和含氮化合物。优化并确立了各步分离条件,用GC-MS对各组分进行检测,了解水热催化裂解降黏前后各组分的变化,剖析了胶质中咔唑类化合物的变化。并结合¹HNMR、元素分析等分析手段,证明稠油经水热催化裂解反应后,重质组分中的含氮组分发生了变化,生成了部分咔唑类化合物, 同时,重质组分的组成和结构也发生了一定程度的改变,其超分子结构在一定程度上遭到破坏,生成二环、三环低环数芳烃和小分子量直链烃。这些变化使得稠油黏度降低。
     

双亲催化剂作用超稠油水热裂解降黏机理研究

合成双亲催化剂,200℃与超稠油反应后,降黏率达96.26%。通过气相色谱仪、元素分析仪、分子量测定仪、红外光谱仪及核磁共振波谱仪对反应前后稠油的物化性质进行分析。结果表明,反应后稠油胶质与沥青质含量减小,稠油分子量下降,沥青质分子量降低幅度最大;稠油及其重质组分的氢碳原子比增加,硫的含量减小。稠油发生水热裂解反应的同时,存在沥青质的聚合反应,沥青质的裂解在降黏反应中起到了关键的作用;双亲催化剂促进了水热裂解反应,同时抑制了聚合反应;双亲型催化降黏剂携带的具有活性催化功能的离子协同高温水作用于分子中的C-S、C-N、C-O、C-C及C=S、C=O、C=N、C=S等键,使其发生系列链的断裂、加氢、开环、成环、脱硫等反应,促进了稠油黏度的降低,稠油及其重质组分的氢碳原子比增加,稠油的品质得到一定程度的改善。     

稠油催化降黏技术开发研究进展

随着常规油气资源的过量开发和快速消耗,稠油等低品位油气资源的高效开采越来越受到人们的重视.稠油由于其黏度大和流动性差导致开采效率低下、开发困难.因此,降低稠油黏度并提高其流动性是稠油高效开采的技术关键.1982年HYNE首次报道了金属催化剂在稠油水热降黏中的结果,Ni、Cu等金属催化剂的加入可以有效降低稠油黏度.此后,水热催化降黏的方法得到了长足的发展,目前催化剂的类型主要包括矿物质催化剂、水溶性催化剂、油溶性催化剂、分散性催化剂、超强酸催化剂等.在水热催化反应中稠油的4个组分(沥青、胶质、烷烃、芳香烃)会发生变化,特别是S、N等杂原子含量的变化对稠油的黏度和品质有着重要的影响.本文作者针对稠油的开采工艺、水热催化降黏剂的种类和特点、水热反应的机理等进行了评述,并对今后的研究方向进行了展望.     

金属盐对辽河稠油水热裂解反应影响研究

在 2 40℃条件下研究了多种金属离子对辽河稠油水热裂解反应的影响。实验结果表明 ,实验所选用的金属盐对辽河稠油的水热裂解反应有催化作用 ,其中 ,以Fe2 的催化效果最好。当加入的Fe2 浓度为 0 0 1mol L时 ,能使辽河稠油的粘度从仅用蒸汽处理后的 8935 7mPa·s降低到 2 36 5 4mPa·s ,降粘率达到 73 5 % ,达到了较好的降粘效果 ,同时稠油的族组成也发生了明显的变化     

超稠油供氢水热裂解改质降黏研究

通过超稠油水热裂解反应前后黏度、沥青质、硫质量分数等性质的变化，研究了超稠油进行水热裂解的主要影响因素及规律。结果表明，超稠油中含有一定量的硫是地层注蒸汽温度下进行水热裂解反应的前提。温度和时间对反应有很大影响。供氢剂中四氢萘对超稠油水热裂解影响最大。四氢萘供氢剂与硫酸镍催化剂复配使用对超稠油水热裂解有协同效应。水热裂解物理模拟实验表明,胜利单家寺油田超稠油通过供氢催化水热裂解降黏率可达70%以上。胶质、沥青质、硫质量分数降低，H/C原子比提高，超稠油得到一定程度的改善。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.