Facile preparation of superhydrophobic coatings by sol-gel processes

Different organic/inorganic compositions and deposition methods were used to prepare superhydrophobic surfaces using metal alkoxides and the sol-gel process. Both surface roughness and composition had to be adjusted in order to obtain very high contact angles and low contact angle hysteresis as a necessary requirement for superhydrophobicity. Multilayer samples with a fluorinated organic-inorganic top layer showed water contact angles of about 157 degrees with low hysteresis (2 degrees ). Water drops rolled easily off their surface at a tilt angle as low as 4 degrees .     

Corrosion behavior of electroless Ni–P/TiO2 nanocomposite coatings

Composite Ni–P/nano‐TiO₂ coatings were prepared by simultaneous electroless deposition of Ni–P and nano‐TiO₂ on a low carbon steel substrate. The deposition was carried out from stirred solutions containing suspended nano‐TiO₂ particles. The Ni–P and Ni–P/nano‐TiO₂ coatings before and after heat treatment were characterized by X‐ray diffraction, scanning electron microscopy and energy dispersive X‐ray spectroscopy. The micro‐structural morphologies of the coatings significantly varied with the nano‐TiO₂ content. The corrosion resistance of as‐plated and heat‐treated Ni–P and Ni–P/nano‐TiO₂ coatings was investigated by anodic polarization, Tafel plots and electrochemical impedance spectroscopic (EIS) studies in 3.5% NaCl solution. Ni–P/nano‐TiO₂ coating exhibited superior corrosion resistance over Ni–P coating. Copyright © 2015 John Wiley & Sons, Ltd.     

Facile preparation method of SiO2/PS/TiO2 multilayer core-shell hybrid microspheres

Organic-inorganic hybrid particles have many potential applications, but almost all of this research was focused on the hybrid particles containing one kind of inorganic nanoparticles. This paper presented a facile preparation method for SiO2/PS/TiO2 multilayer core-shell hybrid microspheres. In this approach, positively charged SiO2/PS core-shell hybrid particles were first synthesized by miniemulsion polymerization using cationic initiator and emulsifier. These positively charged SiO2/PS hybrid particles were mixed with tetra-n-butyl titanate for sol-gel reaction to directly form SiO2/PS/TiO2 multilayer core-shell hybrid microspheres. Some influencing parameters such as surfactant concentration, tetra-n-butyl titanate amount, and glacial acetic acid amount were investigated. TEM, TGA, and EDX analyses indicated that titania layers were successfully coated onto the surfaces of hybrid microspheres.     

Transparent hydrophobic and superhydrophobic coatings fabricated using polyamide 12–SiO2 nanocomposite

Optically transparent hydrophobic and superhydrophobic coatings have been prepared using polyamide 12–SiO₂ nanocomposite (NC) on glass substrates by the spin‐coating method. The coatings have been optimized for their hydrophobicity and transparency. The transformation from hydrophobic to superhydrophobic is achieved with increase in roughness (R_a) which increases with SiO₂ content. These coatings are highly transparent in the entire visible region (400–800 nm). The influence of layer thickness on water contact angle (WCA) and optical transmittance of the coatings has been studied. Field emission scanning electron micrograph (FESEM) shows the presence of SiO₂ nanoparticles covered with polyamide homogenously on the surface and the particles are aggregated to form a rough structure. X‐ray diffraction (XRD) patterns show that the polyamide losses its crystalline structure in the composite. The preparation procedure reported here is simple and eco‐friendly. The dual nature of the coatings, that is, high transparency and superhydrophobicity in the entire visible region suggests for its potential usage in self‐cleanings, wind screen and optoelectronic applications. Copyright © 2016 John Wiley & Sons, Ltd.     

Facile fabrication of colored superhydrophobic coatings by spraying a pigment nanoparticle suspension

Superhydrophobic coatings were prepared by spraying a pigment nanoparticle suspension. By changing the type of pigment nanoparticles, the colors of the coating could be controlled. The particle size of the pigments, which determines the surface structure of the coatings, played an important role in exhibiting superhydrophobicity. The spray-coating process is applicable to a variety of materials (e.g., copper, glass, paper, coiled wire, and tied thread), and the superhydrophobicity was repairable.     

A general templated method to homogeneous and composition-tunable hybrid TiO2 nanocomposite fibers

Sequential impregnations of metal ions and titanium tetraisopropoxide (TTIP) into activated carbon fibers (ACF) followed by a solvothermal treatment has been found to be a general method in the preparations of homogeneous and composition-tunable hybrid TiO(2) hierarchical nanocomposite fibers like WO(3)/TiO(2), Fe(2)O(3)/TiO(2) and SnO(2)/TiO(2).     

Study of Pt/TiO2 nanocomposite for cancer-cell treatment

The increasing incidence of cancer all over the world demands new, effective and secure materials for treatment. In this paper, we propose Pt/TiO₂ nanocomposite for cancer-cell treatment because noble metal nanoparticles are supposed to enhance the photocatalytic activity of TiO₂ nanoparticles. To evaluate the cancer-cell killing effect of our Pt/TiO₂ nanocomposite, TiO₂ and Au/TiO₂ nanoparticles are also introduced. The prepared Pt/TiO₂ nanocomposite are characterized with transmission electron microscopy (TEM) and UV–vis adsorption spectra. Results of cell treatment indicate that Pt/TiO₂ nanocomposite, as extremely stable metal–semiconductor nanomaterial, can exhibit a very high photodynamic efficiency under a mild ultraviolet radiation. And our Pt/TiO₂ nanocomposite shows to be more effective in cancer-cell treatment than TiO₂ and Au/TiO₂ nanoparticles. As a result, Pt/TiO₂ nanocomposite may be supposed to have a promising application for cancer-cell treatment.     

Mesoporous Au/TiO2 nanocomposite microspheres for visible-light photocatalysis

Mesoporous Au/TiO(2) nanocomposite microspheres have been synthesized by using a microemulsion-based bottom-up self-assembly (EBS) process starting from monodisperse gold and titania nanocrystals as building blocks. The microspheres had large surface areas (above 270 m(2) g(-1)) and open mesopores (about 5 nm), which led to the adsorption-driven concentration of organic molecules in the vicinity of the microspheres. Au nanoparticles, which were stably confined within the microspheres, enhanced the absorption over the broad UV/Vis/NIR spectroscopic range, owing to their strong surface plasmon resonance (SPR); as a result, the Au nanoparticles promoted the visible-light photo-induced degradation of organic compounds.     

Fibrous TiO2-SiO2 nanocomposite photocatalyst

The electrospinning method is employed to prepare a fibrous TiO2-SiO2 (Ti : Si = 1 : 2) nanocomposite photocatalyst, in which Degussa P25 T i O2 nanoparticles are embedded inthe body of SiO2 fibers and which shows good photocatalytic activity due to its 3-D open structure, as evidenced by photocatalytic reduction of silver ions and decomposition of acetaldehyde.     

Fabrication of robust superhydrophobic coatings using PTFE‐MWCNT nanocomposite: Supercritical fluid processing

Fabrication of polymer‐carbon composite nanostructure with good dispersion of each other is critical for the desired application due to the nanostructure flaws, agglomeration, and poor absorption between the 2 materials. Fabrication of superhydrophobic surface coating composites of polytetrafluoroethylene (PTFE) with multiwalled carbon nanotubes (MWCNTs) through supercritical fluid processing was explored in this study. Homogeneity of the composite was characterized by X‐ray diffraction and Raman spectroscopy studies, which reveal that the PTFE and MWCNT are uniform in the composite. Microstructural surface evaluation of field‐emission scanning electron microscope and high‐resolution transmission electron microscope studies display that the coating composite possesses roughness structures and fibrillation of the superhydrophobic surface coating. Superhydrophobic character was evaluated on fiber‐reinforced plastic (FRP) sheets, which showed that the prepared coating composite surface showed self‐cleaning properties with a high water contact angle of 162.7°. The surface wettability was studied by increasing different temperatures (30°C to 300°C) in PTFE‐MWCNT composite, which reveals that the FRP sheets were thermally stable up to 200°C and afterward; they transformed from superhydrophobic to hydrophilic state at 250°C. The superhydrophobic surfaces are thermally stable in extreme environmental conditions, and this technique may be used and extendable for large‐scale applications.     

Facile electrochemical approach to fabricate hierarchical flowerlike gold microstructures: Electrodeposited superhydrophobic surface

A templateless, surfactantless, electrochemical approach is proposed to directly fabricate hierarchical flowerlike gold microstructures (HFGMs) on an indium tin oxide (ITO) substrate. The as-prepared HFGMs have been characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and cyclic voltammetry. The HFGMs prepared by simple square wave voltammetry technique exhibit flowerlike microstructures and are built with many staggered nanosheets as building blocks. The diameter and density of the HFGMs can be easily controlled via simply controlling the repetitive run times of square wave voltammetry. Moreover, after further chemisorption of a self-assembled monolayer of n-dodecanethiol, the as-prepared compact surface becomes superhydrophobic with a contact angle as high as 154°.     

Fabrication and characterization of core/shell structured TiO2/polyaniline nanocomposite

A novel core/shell structured TiO(2)/polyaniline nanocomposite was fabricated by grafting aniline on aminobenzoate monolayer that is chemically adsorbed on the TiO(2) nanocrystal surface. The formation and nanostructure of the nanocomposite were investigated by FT-IR and UV-Vis spectra, TEM, FE-SEM, and TG-DTA analysis. Adsorption of aminobenzoate on the TiO(2) surface is an effective method to obtain the uniform nanocomposite. The thickness of polyaniline layer coating on the TiO(2) nanocrystal surface can be controlled in a range of 2-5 nm by this method. A photoelectrochemical study was carried out on the TiO(2)/polyaniline nanocomposite, and found that polyaniline in the nanocomposite acted as a visible-light sensitizer in a photoelectrochemical reaction. The sensitization effect increased with increasing binding strength between polyaniline and TiO(2). A dye-sensitized solar cell with a short circuit current density of 0.19 mA/cm(2) and an open circuit voltage of 0.35 V was fabricated by using the TiO(2)/polyaniline nanocomposite film as a sensitized electrode.     

Zn–HA–TiO2 nanocomposite coatings electrodeposited on a NiTi shape memory alloy

In this work, zinc–hydroxyapatite (Zn–HA) and zinc–hydroxyapatite–titania (Zn–HA–TiO₂) nanocomposite coatings were electrodeposited onto a NiTi shape memory alloy, using a chloride zinc plating bath. The structure of the composite coatings was characterized by X‐ray diffraction, scanning electron microscopy and high‐resolution transmission electron microscopy. According to the results, the Zn–HA–TiO₂ coating exhibited a plate‐like surface morphology, where the addition of the nanoparticles caused to an increase in roughness. It was also found that due to applying a proper stirring procedure during co‐deposition, a homogenous dispersion of the nanoparticles in the coatings was achieved. Also, the addition of the TiO₂ nanoparticles to the Zn–HA–TiO₂ coating enhanced the microhardness and wear resistance. Copyright © 2014 John Wiley & Sons, Ltd.     

Photocatalytic TiO2 coatings on limestone

The application of photocatalytic coatings on stone has been investigated for providing surface protection and self-cleaning properties. Sol–Gel and hydrothermal processes were used to synthesise TiO₂ colloidal suspensions and coatings with enhanced photocatalytic activity without any thermal curing of the coated stone. The stone was a porous limestone (apulian sedimentary carbonatic, calcite stone). Films and powders prepared from TiO₂ sols were studied using X-ray diffraction to evaluate the microstructure and identify rutile and anatase phases. A morphological and physical characterisation was carried out on coated and uncoated stone to establish the changes of appearance, colour, water absorption by capillarity and water vapour permeability. The photocatalytic activity of the coated surface was evaluated under UV irradiation through NO _x and organics degradation tests. The performances of the synthesised TiO₂ sols were compared with commercial TiO₂ suspension. Since the coating doesn’t need temperature treatments for activating the photocatalytic properties, the nano-crystalline hydrothermal TiO₂ sols seem good candidate for coating applications on stone that cannot be annealed after the coating application.     

Al2O3/TiO2 hybrid nanofluids thermal conductivity

Journal of Thermal Analysis and Calorimetry - This research deals with experimental studies on thermal conductivity variation of Al2O3 and TiO2 hybrid nanofluids with water as the base fluid. In...