含有偏心球形微粒介质球的有效介电常量

对于处在均匀外电场中含有偏心球形微粒的介质球,利用分离变量法求出球内外的电场,给出了球外电偶极矩和电四极矩的近似表达式.首次引入含有偏心球形微粒介质球的有效介电常量,它不同于同心多层介质球的等效介电常量,不仅与介质球内的介质有关,而且与球外介质有关.数值结果显示了有效介电量数随偏心距和球外介质介电常量的变化情况.     

真空介电常量和真空磁导率在高斯单位制中的数值

首先由ε 0和μ0在国际单位制中的数值得出其在高斯单位中的数值, 然后利用之, 把电磁学公式由S I制 化到G a u s s制, 并利用它解释了存在真空极化的合理性, 及“ 真空磁化”的存在     

银纳米颗粒复合超材料的数值和模拟研究

理论分析了单层银纳米颗粒及其复合超材料的电磁特性,并采用MATLAB数值计算和CST模拟对理论进行了验证.结果显示:4.75 nm银颗粒所形成的单层阵列的数值和模拟结果都有Lorentz共振效应出现,模拟结果相对于数值计算有红移现象,且有微弱的磁共振效应.进一步对采用4.75 nm颗粒复合而成的100 nm大颗粒模拟,结果表明:在800~1 000 nm区间共振得到负的实有效介电常量、负的实有效磁导率和负的折射率,说明100 nm复合球形颗粒具有很强的磁共振效应,与理论分析相符.     

银纳米颗粒复合超材料的数值和模拟研究

理论分析了单层银纳米颗粒及其复合超材料的电磁特性,并采用MATLAB数值计算和CST模拟对理论进行了验证.结果显示:4.75 nm银颗粒所形成的单层阵列的数值和模拟结果都有Lorentz共振效应出现,模拟结果相对于数值计算有红移现象,且有微弱的磁共振效应,进一步对采用4.75 nm颗粒复合而成的100 nm大颗粒模拟,...     

雨介质的等效介电常量模型

利用系统辨识法研究了雨介质的介电常量,分别得到了毫米波段雨介质的雨强等效介电常量模型和频率等效介电常量模型,利用模型计算雨衰减的结果与有关文献完全一致,表明所得模型实用有效;利用雨强等效介电常量模型得到的电磁波的交叉去极化与文献基本一致.     

基于变换光学的隐身衣设计

从阐述麦克斯韦方程组在坐标变换下形式不变性出发,介绍了基于变换光学设计隐身衣的思路,并分别推导了实现二维圆柱形、椭圆柱形、正方形隐身衣的相对介电常量和相对磁导率张量在物理空间的分布公式.利用COM-SOL M ultiphysics仿真软件,给出了二维圆柱形、椭圆柱形、正方形隐身衣的隐身效果.     

电介质的频域特性与测量

从物质的分子结构基本模型出发，简要介绍了介电频域理论，提出了有关新的测量方法。     

频率相关材料的计算模型分析

系统地介绍了Debye、Drude、Lorentz模型相对介电常量的推导过程,并给出了其相应结果;再用有损耗的Drude模型讨论了当前引起广泛关注的左手介质的性质;最后通过推导和举例,进一步揭示了各种模型在实际研究中的重要作用.     

光学复合体系中有效介质理论的适用条件

以纳米晶掺杂复合体系为例,研究该类多组分光学材料的有效介电系数随复合体系结构和组分介电系数的变化,进而分析有效介质理论的适用条件。假定纳米晶被周期性掺杂到背景晶体中,且均为各向同性材料。借助转移矩阵理论研究发现,当纳米晶和背景晶体的介电系数相差较大时,有效介电系数会表现出波长依赖性。此外,发现复合体系在其光学能隙处没有有效介电系数,说明此时基于等效介质思想的有效介质理论均不适合描述复合体系的光学性质,这是因为在物理上均一的光学材料无法形成光学能隙。     

带壳介质椭球的等效介电常量

通过引入椭球坐标系,求解满足给定边界条件的拉普拉斯方程,得出了带壳介质椭球内外的电势分布,从而进一步讨论了带壳椭球的等效介电常量.     

Calculation of effective parameters of thermoelectromagnetoelastic layered media

A system of layered multiferroic materials is averaged with allowance for thermal properties of layers. Matrix averaging is used to obtain effective parameters of the system. Formulas that make it possible to characterize the effect of magnetoelectroelastic coefficients of layers on thermal parameters are derived. The presence of pyrocoefficients in the system is possible even in the absence of the coefficients for the layers. The heat capacity of the system ceases to be an additive quantity and becomes dependent on permittivity and permeability of the layers owing to the interaction of the fields.     

蜂窝结构吸波材料等效电磁参数和吸波特性研究

根据强扰动理论,在长波长近似条件下推导出蜂窝结构吸波材料等效介电常数和等效磁导率的计算公式.电磁参数计算结果表明,蜂窝结构吸波材料等效介电常数和等效磁导率均小于吸收层的介电常数和磁导率,但等效介电常数的降幅更大,从而使等效介电常数更接近于等效磁导率,这正是吸波材料波阻抗匹配设计所需要的.反射率计算结果表明,不同的蜂窝高度,吸收层对应一最优厚度,使蜂窝结构吸波材料的反射率最低.这些结果对于蜂窝结构吸波材料设计具有一定的意义. 关键词： 蜂窝结构吸波材料 等效介电常数 等效磁导率 反射率     

Theoretical calculation and experiment of microwave electromagnetic property of Ni(C) nanocapsules

With the combination of the dielectric loss of the carbon layer with the magnetic loss of the ferromagnetic metal core,carbon-coated nickel Ni(C) nanoparticles are expected to be the promising microwave absorbers. Microwave electromagnetic parameters and reflection loss in a frequency range of 2 GHz–18 GHz for paraffin-Ni(C) composites are investigated.The values of relative complex permittivity and permeability, the dielectric and magnetic loss tangent of paraffin-Ni(C) composites are measured, respectively, when the weight ratios of Ni(C) nanoparticles are equal to 10 wt%, 40 wt%, 50 wt%,70 wt%, and 80 wt% in paraffin-Ni(C) composites. The results reveal that Ni(C) nanoparticles exhibit a peak of magnetic loss at about 13 GHz, suggesting that magnetic loss and a natural resonance could be found at that frequency. Based on the measured complex permittivity and permeability, the reflection losses of paraffin-Ni(C) composites with different weight ratios of Ni(C) nanoparticles and coating thickness values are simulated according to the transmission line theory. An excellent microwave absorption is obtained. To be proved by the experimental results, the reflection loss of composite with a coating thickness of 2 mm is measured by the Arch method. The results indicate that the maximum reflection loss reaches-26.73 d B at 12.7 GHz, and below-10 d B, the bandwidth is about 4 GHz. The fact that the measured absorption position is consistent with the calculated results suggests that a good electromagnetic match and a strong microwave absorption can be established in Ni(C) nanoparticles. The excellent Ni(C) microwave absorber is prepared by choosing an optimum layer number and the weight ratio of Ni(C) nanoparticles in paraffin-Ni(C) composites.     

非对称开口六边形谐振单环的微波透射特性

受自然界树型结构的启发，设计了分叉树型微结构单元，用电路板刻蚀技术制作了非对称开口六边形谐振单环及其组合结构.采用计算机模拟和实验研究了单个和多个谐振环在微波段(7—12 GHz)的电磁响应行为.研究结果表明：该结构具有负磁导率特性，开口谐振环几何尺寸影响环的磁谐振频率；两环环间距较小时出现二次谐振；带高级分支的辐射状环列相对于不带分支环列透射峰向低频移动.实验和模拟结果相符. 关键词： 负磁导率 开口谐振环 透射率     

Z变换在磁化等离子体电磁脉冲传播时域分析中的应用

通过Z变换的方法,将与频率有关的磁化等离子体的介电常数由频域变换到Z域,推导了Z变换形式的时域有限差分法计算式,模拟了电磁脉冲在磁化等离子体中的传播。经过离散傅里叶变换,给出了电磁波通过磁化等离子体后的反射系数和透射系数与频率的关系。还给出了模拟结果和理论值的对比。结果表明,Z变换算法的模拟结果比卷积分更接近理论值。     

Bounds for effective parameters of multicomponent media by analytic continuation

Recently D. Bergman introduced a method for obtaining bounds for the effective dielectric constant (or conductivity) of a two-component medium. This method does not rely on a variational principle but instead exploits the properties of the effective parameter as an analytic function of the ratio of the component parameters. We extend the method to multicomponent media using techniques of several complex variables.     

电磁超材料中负磁导率对负介电常数的影响

为深入了解电磁超材料中物质间相互作用关系,理论分析了金属导体线阵列宏结构嵌入单负磁导率媒质中时其等效介电常数的变化特性。数值计算和电磁仿真方法相结合,讨论了单负磁导率媒质和单负介电常数媒质的相互作用关系,提出了减小其相互作用的解决方法。仿真结果显示：将金属线阵列直接嵌入到单负磁导率媒质中时,电磁超材料传输特性在整个频段内为传输禁带;将金属线裹附一层绝缘材料后,传输禁带变为传输通带,这表明金属线阵列和单负磁导率媒质之间必须加入一种绝缘材料才能合成双负的电磁超材料。     

一种双开口谐振环结构的新型双负介质

 提出了一种双开口谐振环结构的新型双负介质单元模型,该模型集电、磁谐振于一体,结构简单。用时域有限差分法和CST软件对该新型结构进行了模拟对比,并对其物理机理进行了分析,解释了其双负效应发生的原因。从电磁波理论出发,导出了波导中双负介质参数的反演公式,推广了通常提取介质参数的NRW方法,并由此提取了新型双负介质的等效电磁参数。结果表明：在频率10.3 GHz附近其等效介电常数和等效磁导率的实部同时为负值,确定了其双负效应的存在。     

Effect of annealing treatments on the microwave electromagnetic properties of amorphous FeCuNbSiB microwires

The amorphous FeCuNbSiB microwires are fabricated by using the melt extraction method and annealed separately at temperatures T = 573, 673, 723 and 773K for 1h. The effect of annealing treatment on the microwave electromagnetic properties of FeCuNbSiB wires/wax composites has been investigated for the first time. It is found that in a frequency range of 0.5--4.0GHz, the complex permittivity, permeability, magnetic and electric loss tangents of FeCuNbSiB wires/wax composites are strongly dependent on the annealing temperature and frequency. For T = 573, 723 and 773K, two resonance peaks are found at frequency f = 1.2 and 3.3GHz. However, for T = 673K, only one resonance peak occurs at f = 3.3GHz. The resonance peak at f = 1.2GHz is believed to be due to the stress-induced anisotropy, while the resonance peak at f = 3.3GHz is attributed to the random anisotropy.     

Fabrication and electromagnetic wave absorption properties of amorphous Ni-P nanotubes

Amorphous Ni-P nanotubes are fabricated through electroless chemical deposition inside an anodic aluminum oxide template. The hysteresis loops of Ni-P nanotube arrays are each found to exhibit an unusual isotropic behaviour, which is believed to be due to the competition results between the shape anisotropy and the magnetostatic interaction among nanotubes. The dynamic dependence of permittivity on the frequency spectrum is fitted to the Lorentzian-type dispersion law. The permeability dispersion behaviours have been fitted based on the Kittel equation. Electromagnetic wave absorption properties of Ni-P nanotubes/paraffin composites with different values of thickness (t) are clearly shown by a three-dimensional graph. Furthermore, the bandwidths of composites with different "t" values can be well presented by a two-dimensional contour graph, which is a novel presentation form. The results show that the composites each have a good microwave absorption performance with t larger than 5.5 mm and with the frequency around 8 gigahertz.