茚三酮对B-Z振荡反应的影响

研究了茚三酮对B Z振荡体系的影响,考察了振幅和周期的改变值与茚三酮浓度的关系。结果表明,在6.9×10-7～4.2×10-2mol/L范围内,第一振幅改变值与茚三酮浓度有良好的线性关系,相关系数为0.9977。依据FKN模型,对此反应机理进行了初步探讨。     

Determination of furfural in an oscillating chemical reaction using an analyte pulse perturbation technique

A rapid and convenient method for the determination of furfural is presented that is based upon sequential perturbation of the Mn(II)-catalyzed B-Z oscillating system with different amounts of furfural using a continuous-flow stirred tank reactor (CSTR). When the sample was injected, the change in the amplitude and/or period was linearly proportional to the logarithm of the concentration of furfural over the range 3×10⁻⁸∼1×10⁻⁵ mol L⁻¹. This method gave a detection limit of 3×10⁻⁹ mol L⁻¹ under optimum conditions. Finally, the possible mechanism of furfural perturbation in the oscillating reaction is discussed. When the furfural was injected into the Mn(II)-catalyzed B-Z oscillating system, the change in the amplitude and/or period was linearly proportional to the logarithm of the concentration of furfural over the range 3×10⁻⁸~1×10⁻⁵ mol L⁻¹, with a detection limit of 3×10⁻⁹ mol L⁻¹ under optimum conditions.      

Periodic change of viscosity and density in an oscillating chemical reaction

It was found that the periodic change of the solution viscosity and density was generated in the Belousov-Zhabotinsky (BZ) reaction. This rhythmic phenomenon was observed in both the iron catalyst [[Fe(Phen)(3)](2+)-[Fe(Phen)(3)](3+)] and the cerium catalyst [Ce(III)-Ce(IV)] system, where the solution viscosity and density were synchronized with the redox potential in the in-phase mode. However, the time delay existed between the redox potential and the solution viscosity and density. The behavior of the BZ reaction was also monitored in the presence of the nonionic surfactant. This experiment revealed that, beyond the critical micelle concentration, the phase between the redox potential and the solution viscosity and density was synchronized into the antiphase mode. We suggested that the variation of the catalyst drove the oscillation of the solution viscosity and density in the BZ reaction.     

Kinetic determination of silver ion by its perturbation on Belousov-Zhabotinskii oscillating chemical reaction using potentiometric method.

Silver ion can perturb the Belousov-Zhabotinskii (B-Z) oscillating chemical reaction. Therefore, the B-Z oscillating system was applied in the determination of silver ion by using a platinum wire as an indicator electrode in the potentiometric method. The amplitude of the potentiometric oscillation increased linearly in proportion to [Ag+] in the range of 9.42 x 10(-6) M to 2.54 x 10(-4) M, with a correlation coefficient of 0.999 under the optimum conditions. The obtained LOD (2sigma) was 8.85 x 10(-6) M and the relative standard deviation (RSD) for five measurements of 1 x 10(-4) M silver ion was 5%. The influence of some potentially interference was also investigated.     

化学反应处理的计算模型

介绍了一种将同类反应上升为合成反应知识和在计算机上实现反合成分析的方法,反合成分析是合成设计中最关键的一步,在本工作中采用了基于谋略键寻找的合成设计方法。它有逻辑宜于在计算机上实现的优点。为了实现这个方法,我们首次提出了一种能中肯地描述合成反应的计算模型—反应知识的分类模型。这一模型由三条规则定义：规则A-反应类型;规则B-发生反应的外部条件;规则C-不适宜采用这个反应的情况;这种计算模型能够将海量反应数据中最重要最基本的信息提炼出来,转换成计算机能处理的知识。它也包含有反应适用范围的信息,从而提高了析分过程的外推能力。     

Kinetic determination of hexacyanoferrates by their inhibition of an oscillating chemical reaction

A method for the kinetic determination of traces of hexacyanoferrate based on an oscillating chemical reaction is presented. In a Belousov-Zhabotinskii reaction system, by using a bromide ion-selective electrode, the amplitude decrease of the potentiometric oscillation is linearly proportional to the concentration of Fe(CN)^3?₆ [or Fe(CN)^4?₆] in the range 7 × 10^?8?5 × 10^?6 M. The relative standard deviation for 1 × 10^?6 M Fe(CN)^3?₆ is 2.7% (n = 6). Cyclic voltammetry was applied to study the mechanism of the proposed system. The procedure was utilized to determine hexacyanoferrates in silver plating and photographic solutions.     

Determination of sulfanilamide based on the Mn(II)-catalyzed oscillating chemical reaction

A convenient and sensitive method for determination of sulfanilamide (SNA) was described based on the Mn(II)-catalyzed oscillating chemical reaction. Under optimum conditions, a linear relationship existed between the changes of oscillating period or amplitude and the negative of logarithm of SNA concentration in the range of 4.27 × 10⁻⁸ mol ·L⁻¹ ∼ 7.41 × 10⁻⁶ mol ·L⁻¹ (RSD, 0.85%) and 9.33 × 10⁻⁸ mol ·L⁻¹ ∼ 3.02 × 10⁻⁶ mol ·L⁻1 (RSD, 1.08%), respectively. The lower limit of detection was found to be 2.69 × 10⁻⁸ mol ·L⁻¹ and 6.03 × 10⁻⁸ mol ·L⁻¹, respectively.      

Determination of gases (NO, CO, Cl(2)) using mixed-mode regimes in the Belousov-Zhabotinskii oscillating chemical reaction

We show a principle possibility of the determination of gases concentrations (NO, CO, Cl(2)) by their affect on mixed-mode oscillations in the Belousov-Zhabotinskii (BZ) oscillating chemical reaction. These oscillations are characterized by single large amplitude oscillation followed by a number of small amplitude oscillations. The method of the determination is based on a construction of a calibration plot given by the dependence of the number of small amplitude oscillations on gas concentration.     

Reduction of chemical reaction networks using quasi-integrals

We present a numerical method to identify possible candidates for quasi-stationary manifolds in complex reaction networks governed by systems of ordinary differential equations. Inspired by singular perturbation theory, we examine the ratios of certain components of the reaction rate vector. Those ratios that rapidly approach a nearly constant value define a slow manifold for the original flow in terms of quasi-integrals, that is, functions that are nearly constant along the trajectories. The dimensionality of the original system is thus effectively reduced without reliance on a priori knowledge of the different time scales in the system. We also demonstrate the relation of our approach to singular perturbation theory which, in its simplest form, is just the well-known quasi-steady-state approximation. In two case studies, we apply our method to oscillatory chemical systems: the 6-dimensional hemin-hydrogen peroxide-sulfite pH oscillator and a 10-dimensional mechanistic model for the peroxidase-oxidase (PO) reaction system. We conjecture that the presented method is especially suited for a straightforward reduction of higher dimensional dynamical systems where analytical methods fail to identify the different time scales associated with the slow invariant manifolds present in the system.     

Accelerating chemical database searching using graphics processing units

The utility of chemoinformatics systems depends on the accurate computer representation and efficient manipulation of chemical compounds. In such systems, a small molecule is often digitized as a large fingerprint vector, where each element indicates the presence/absence or the number of occurrences of a particular structural feature. Since in theory the number of unique features can be exceedingly large, these fingerprint vectors are usually folded into much shorter ones using hashing and modulo operations, allowing fast "in-memory" manipulation and comparison of molecules. There is increasing evidence that lossless fingerprints can substantially improve retrieval performance in chemical database searching (substructure or similarity), which have led to the development of several lossless fingerprint compression algorithms. However, any gains in storage and retrieval afforded by compression need to be weighed against the extra computational burden required for decompression before these fingerprints can be compared. Here we demonstrate that graphics processing units (GPU) can greatly alleviate this problem, enabling the practical application of lossless fingerprints on large databases. More specifically, we show that, with the help of a ~$500 ordinary video card, the entire PubChem database of ~32 million compounds can be searched in ~0.2-2 s on average, which is 2 orders of magnitude faster than a conventional CPU. If multiple query patterns are processed in batch, the speedup is even more dramatic (less than 0.02-0.2 s/query for 1000 queries). In the present study, we use the Elias gamma compression algorithm, which results in a compression ratio as high as 0.097.     

Asymptotic limit-cycle analysis of oscillating chemical reactions

The asymptotic limit-cycle analysis of mathematical models for oscillating chemical reactions is presented. In this work, after a brief presentation of mathematical preliminaries applied to the biased Van der Pol oscillator, we consider a two-dimensional model of the Chlorine dioxide Iodine Malonic-Acid (CIMA) reactions and the three-dimensional and two-dimensional Oregonator models of the Belousov–Zhabotinsky reactions. Explicit analytical expressions are given for the relaxation-oscillation periods of these chemical reactions that are accurate within 5% of their numerical values. In the two-dimensional CIMA and Oregonator models, we also derive critical parameter values leading to canard explosions and implosions in their associated limit cycles.

     

Effect of electromagnetic radiation on the Belousov-Zhabotinsky oscillating reaction

The effect of electromagnetic radiation with a frequency close to the maximum of absorption of atmospheric oxygen on the Briggs-Rauscher self-oscillating reaction is described. It is shown that the radiation intensifies oxygen production and lengthens the duration of the self-oscillating regime by more than 20%.     

Calorimetric study of the component steps of oscillating chemical reactions

An influence of inorganic compounds (Fe₂O₃, ZnO, PbO, CaCO₃ and K₂CO₃) on the blast furnace coke thermal oxidation in the air and in the CO₂atmosphere was investigated by means of thermal analysis. A catalytic effect showed itself at the oxidation in the air, especially with PbO and K₂CO₃. These compounds bring the oxidation starting temperature and activation energy down and increase the reaction rate constant most distinctly. The PbO and K₂CO₃ actions differ in their mechanisms. K₂CO₃ accelerates particularly the amorphous coke fractions oxidation. In the CO₂ atmosphere an important catalytic effect occurred only with K₂CO₃. The PbO catalytic influence is less distinct. This revised version was published online in July 2006 with corrections to the Cover Date.     

Trace determination of cobalt ion by using malic acid-malonic acid double substrate oscillating chemical system

A novel kinetic method for determination of trace amounts of cobalt ion was proposed and validated. The method is based on adding malic acid into classical Belousov-Zhabotinskii （B-Z） oscillating chemical system to form a double substrate one. The results showed that when the concentration of cobalt ion was in the range of 5.27× 10^-8 to 5.37 × 10^-12 mol L^-1, the change of the oscillating period was directly proportional to the negative logarithm of cobalt ion concentration. The sensitivity and precision of the developed method were quite satisfactory. The limit of detection was down to 5.20 × 10^-13 mol L^-1 which was a highest sensitivity found for determination of metal ions using oscillating chemical reaction so far. Some factors influencing the determination were also examined. The method has been successfully used to determine cobalt ion in vitamin B12 injection.     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent

The reaction mechanisms of thermal crosslinking of polyethylene with dicumyl peroxide (DCP) at high temperatures were investigated by electron spin resonance (ESR). The crosslinking reactions were induced by the alkyl radicals formed by the thermal decomposition of DCP above 120°C. The kinetics of the free radical reaction were followed during crosslinking reactions at temperatures between 145 and 180°C. © 1997 John Wiley & Sons, Inc.     

甘草参与的B-Z振荡反应研究

以H+-Mn2+-BrO-3-CH3COCH3-甘草组成的化学振荡体系,应用电化学工作站记录电位(E)随时间(t)的变化,绘制化学振荡曲线.通过考察反应条件及反应物的浓度等因素对振荡曲线的影响,优化最佳的振荡反应条件,计算反应的活化能,推断反应的机理.为利用此方法鉴别中草药及研究中药治疗疾病提供理论依据.     

Microwave chemical processing

The chemical industry admits to minimal use of microwave power because of its high capital and operating costs relative to steam, combustion, electrical, and other traditional sources of energy. Other valid historical and persistent reasons for their lack of proper use include: a poor conceptual understanding of microwaves by chemical professionals, their unwillingness to replace existing adequate methods with radically new technology, the infancy of the microwave industrial power supply, and unfamiliarity of microwave power systems manufacturers with the chemical industry. In years past, the North American chemical industry had few competitors and profits were generally large. Environmental regulations were few and product quality was less a concern than production volume. The microwave power industry relied on the government and communications for lucrative sales. Those days appear over. Chemical manufacturers must probe every technology to achieve the edge necessary to stay competitive while meeting environmental stewardship demands. Microwave power has always offered unique advantages in heating materials selectively and/or quickly to high or preselected temperatures with fast control response. In the cases discussed in this paper, novel applications of microwave power afford: faster production, a reduction in product contaminants, reduced downtime, reduced waste, product quality improvements, and better pollution control.     

Studies on oscillating chemical reaction in Cu(II)‐catalyzed thiocyanate–hydrogen peroxide–NaOH system using pulsating sensor

We present a novel measurement technique to study an oscillating chemical reaction using a new class of sensor, viz. a pulsating sensor developed in‐house. A halogen‐free oscillating chemical reaction in the Cu(II)‐catalyzed H₂O₂‐KSCN–NaOH system reported by Orban was chosen to examine the performance of this technique. Shift in potential during the oscillating reaction was captured online with high precision and excellent resolution using this simple but high‐performance pulsating potentiometric measurement technique. In this work, the influence of bath temperature and flow rate of reagents on the Cu(II)‐catalyzed H₂O₂–KSCN–NaOH oscillating chemical reaction is investigated to optimize the conditions for rapid oscillations. This, in turn, helps to evolve analyte pulse perturbation techniques for rapid assay of hydrazine, uranium(VI), and sodium thiosulfate in aqueous solutions using the above oscillating reaction. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 19–29, 2013