The chameleon-like nature of zwitterionic micelles: the intrinsic relationship of anion and cation binding in sulfobetaine micelles

The rate of specific hydrogen ion-catalyzed hydrolysis of 2-( p-heptoxyphenyl)-1,3-dioxolane and acid-base equilibrium of 4-carboxy-1-n-dodecylpyridinium in zwitterionic micelles of SB3-14, C14H29NMe2+(CH2)3SO3(-) are controlled by NaClO4, which induces anionic character and uptake of H3O+ in the micelles. Other salts, e.g., NaF, NaCl, NaBr, NaNO3, NaI, NaBF4, have similar, but smaller, effects on the uptake of H3O+. Salt effects upon zeta potentials of SB3-14 micelles, estimated by capillary electrophoresis, are anion specific, and the anion order is similar to that of the rates of acid hydrolysis and of acid-base equilibria. Fluorescence quenching shows that the micellar aggregation number is not very sensitive to added salts, consistent with electrophoretic evidence. These specific anion effects follow the Hofmeister series and are related to anion hydration free energies.     

The chameleon-like nature of zwitterionic micelles: effect of cation binding

Addition of salts, especially perchlorates, to zwitterionic micelles of SB3-14, C(14)H(29)NMe(2)(+)(CH(2))(3)SO(3)(-), induces anionic character and uptake of H(3)O(+) by SB3-14 micelles. Thus, the addition of alkali metal perchlorates accelerates the acid hydrolysis of 2-(p-heptoxyphenyl)-1,3-dioxolane, HPD, in the presence of SB3-14 micelles, which depends on the local proton concentration at the micelle surface. The addition of metal chlorides to solutions of such perchlorate-modified SB3-14 micelles decreases both the negative zeta potential of the micelles and the observed rate constant for acid hydrolysis of HPD. The effect of the monovalent cations Li(+), Na(+), and K(+) is smaller than that of the divalent cations Be(2+), Mg(2+), and Ca(2+), and much smaller than that of the trivalent cations Al(3+), La(3+), and Er(3+). The major factor responsible for this cation valence dependence of these effects is shown to be electrostatic in nature, reflecting the strong dependence of the micellar surface potential on the cation valence. The fact that the salt effects are not identical after correction for the electrostatic effects indicates that additional secondary nonelectrostatic effects may contribute as well.     

Different properties of H2O- and D2O-containing phospholipid-based reverse micelles near a critical temperature

Dipalmitoylphosphatidylcholine (DPPC)/water/pyridine reverse micelles have been found to transform from a clear liquid into a glass when the DPPC-to-water volume fraction is in the 0.78-0.89 range at 28 or 26 degrees C depending on whether water is H2O or D2O. Their study by SANS, FT-IR, and 1H NMR for this composition has shown remarkable effects of the isotopic nature of water on their structural and dynamic properties. By SANS, between 38 and 43.5 degrees C, micelles appear as either flexible polymer-like cylinders or short rods depending on whether water is H2O or D2O. On the basis of this dual aspect, micelles have been visualized as branched cylinders whose quasi-spherical branching points would be prone to assemble into short rods. In addition, when water contains more than 40% of D2O, a Bragg reflection emerges at 0.12 A(-1) on SANS spectra, evidencing an organization of micelles. In addition, FT-IR spectra show that DPPC phosphate groups are D bonded only when water is D2O. Consequently, we assumed that forces prone to organize the D2O-containing micelles are D-bonded water bridges between neighboring micelles at the level of their branching points. In fact, ab initio calculations have shown that water dimers are more stable when the bridging atom is D rather than H. These water bridges could be formed due to the fact that branching points, able to slide along micelles, keep close for a longer time when water is D2O than when it is H2O. Indeed, it has been shown experimentally that the lateral diffusion of phospholipid molecules in any layer is slower in the first case. Formation of such bridges triggers a deuteron migration between micelles evidenced by the 1/T1 relaxation rate of deuterons of water in D2O-containing micelles measured at 43 degrees C by 1H NMR.     

Controlled self-assembly of filled micelles on nanotubes

We have used coarse-grained molecular dynamics simulations to show that hydrated lipid micelles of preferred sizes and amounts of filling with hydrophobic molecules can be self-assembled on the surfaces of carbon nanotubes. We simulated micelle formation on a hydrated (40,0) carbon nanotube with an open end that was covered with amphiphilic double-headed CH(3)(CH(2))(14)CH(((CH(2)OCH(2)CH(2))(2)(CH(2)COCH(2)))(2)H)(2) or single-headed CH(3)(CH(2))(14)CH(2)((CH(2)OCH(2)CH(2))(2)(CH(2)COCH(2)))(4)H lipids and filled with hexadecane molecules. Once the hexadecane molecules inside the nanotube were pressurized and the lipids on its surface were dragged by the water flowing around it, kinetically stable micelles filled with hexadecane molecules were sequentially formed at the nanotube tip. We investigated the stability of the thus-formed kinetically stable filled micelles and compared them with thermodynamically stable filled micelles that were self-assembled in the solution.     

Exploitation of reversed micelles as a medium in mimetic peroxidase-catalyzed fluorogenic reaction between hydrogen peroxide and l-tyrosine

The peroxidase activity of mimetic enzyme, iron tetrasulfonatophthalocyanine (FeTSPc), was characterized in reversed micelles of hexadecyltrimethylammonium bromide (CTAB) formed in n-heptane-n-pentanol solution (2:1, V:V). The assay is based on its catalytic effect on the oxidation reaction of l-tyrosine (l-tyr) by hydrogen peroxide. The influences of environmental factors, such as the water content, CTAB concentration and pH, on the peroxidase activity of FeTSPc were investigated. It was observed that the reaction rate was distinctly enhanced in CTAB reversed micelles as compared with the rate in aqueous solution. Under optimum conditions, application of the FeTSPc-catalyzed fluorescence system in reversed micelles to the determination of H(2)O(2) and FeTSPc led to a highly sensitive system compared with that in aqueous solution, permitting detection limits of 5x10(-9) mol l(-1) H(2)O(2) and 2.3x10(-9) mol l(-1) FeTSPc. The advantages and limitations of employing the reversed micellar media in such mimetic peroxidase-catalyzed fluorescent detection schemes were discussed.     

A small-angle neutron and static light scattering study of micelles formed in aqueous mixtures of a nonionic alkylglucoside and an anionic surfactant

The size and shape of micelles formed in aqueous mixtures of the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic sugar-based surfactant n-decyl beta-D-glucopyranoside (C(10)G) at different concentrations of added salt have been investigated with small-angle neutron and static light scattering. Rather small prolate ellipsoidal micelles form in the absence of added salt and at [NaCl] = 10 mM in D(2)O. The micelles grow considerably in length to large rods as the electrolyte concentration is raised to [NaCl] = 0.1 M. In excess of nonionic surfactant ([SDS]/[C(10)G] = 1:3) at [NaCl] = 0.1 M in D(2)O, several thousands of Angstroms long wormlike micelles are observed. Most interestingly, a conspicuously large isotope solvent effect was observed from static light scattering data according to which micelles formed at [SDS]/[C(10)G] = 1:3 and [NaCl] = 0.1 M in H(2)O are at least five times smaller than micelles formed in the corresponding samples in D(2)O.     

Variation of characteristics of pentaoxyethylene decyl C10E5 and hexaoxyethylene tetradecyl C14E6 ether micelles with uptake of n-octanol

Wormlike micelles of the surfactant pentaoxyethylene decyl C10E5 and hexaoxyethylene tetradecyl C14E6 ethers were characterized by static (SLS) and dynamic light scattering (DLS) experiments to examine effects of uptake of n-octanol on the micellar characteristics. The SLS results have been successfully analyzed by the light scattering theory for micelle solutions to yield the molar mass Mw(c) as a function of concentration c along with the cross-sectional diameter d of the micelle. The apparent hydrodynamic radius RH,app(c) determined by DLS as a function of c has also been successfully analyzed by a fuzzy cylinder theory which takes into account the hydrodynamic and direct collision interactions among micelles, providing us with the values of the stiffness parameter lambda(-1). It has been found that the micellar length Lw increases with increasing surfactant weight fraction ws and increasing n-octanol content wo in the micelles or with raising temperature T. The values of d and lambda(-1) are found to increase with increasing wo, whereas the spacing s between hydrophilic tails of adjacent surfactant molecules on the micellar surface decreases with increasing wo. Comparison with our previous results for the C10E5 and C14E6 micelles containing n-dodecanol has revealed the salient features in change of the micellar characteristics with uptake of n-alcohols as follows: (i) The Lw values increase more significantly for the C14E6 micelles containing n-dodecanol than those containing n-octanol, whereas Lw of the C10E5 micelles increases by including n-dodecanol and n-octanol without a significant difference for the two alcohols. (ii) The values of d and lambda(-1) of the C10E5 and C14E6 micelles increase with uptake of n-octanol and n-dodecanol into the micelles. They are larger for the C10E5 micelles than for the C14E6 micelles, and their increase with alcohol content is less significant for the C14E6 micelles in comparison with the C10E5 micelles. (iii) The s values of the C10E5 and C14E6 micelles decrease with uptake of n-octanol and n-dodecanol into the micelles. They are somewhat larger in the latter micelles than in the former. (iv) The variation in d, s, and lambda(-1) with uptake of n-alcohol occurs with no difference in the effects for the two alcohols n-octanol and n-dodecanol.     

Quantification of specific anion binding to non-ionic Triton X-100 micelles

Anion binding to nonionic micelles was quantified by self-diffusion. Four anions were probed by multinuclear PGSTE NMR measurements in a Triton X-100 micellar aqueous solution. The salt concentration used was sufficiently low to avoid any micellar growth affecting surface curvature. The micellar aggregates that provide a model surface are uncharged with hydrophilic headgroups so that electrostatic ion surface interactions play little or no role in prescribing specific anion binding. Anionic affinity to the micellar surface followed a Hofmeister series, (CH(3))(2)AsO(2)(-) ? CH(3)COO(-) > H(2)PO(4)(-) > F(-). The observed ion specificity is rationalized by calling into play the nonelectrostatic interactions occurring between the anions and the micellar surface.     

Morphology of hybrid polystyrene-block-poly(ethylene oxide) micelles: analytical ultracentrifugation and SANS studies

Morphology and structure of aqueous block copolymer solutions based on polystyrene-block-poly(ethylene oxide) (PS-b-PEO) of two different compositions, a cationic surfactant, cetyl pyridinium chloride (CPC), and either platinic acid (H2PtCl6.6H2O) or Pt nanoparticles were studied using a combination of analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), and small angle neutron scattering (SANS). These studies combining methods contributing supplemental and analogous structural information allowed us to comprehensively characterize the complex hybrid systems and to discover an isotope effect when H2O was replaced with D2O. In particular, TEM shows formation of both micelles and larger aggregates after incorporation of platinic acid, yet the amount of aggregates depends on the H2PtCl6.6H2O concentration. AUC reveals the presence of micelles and micellar clusters in the PS-b-PEO block copolymers solution and even larger (supermicellar) aggregates in hybrids (with CPC). Conversely, SANS applied to D2O solutions of the similar species indicates that micelles are spherical and no other micellar species are found in block copolymer solutions. To reconcile the SANS and AUC data, we carried out AUC examination of the corresponding D2O block copolymer solutions. These measurements demonstrate a pronounced isotope effect on micelle aggregation and micelle size, i.e., no micelle aggregation in D2O solutions, revealing good agreement of AUC and SANS data.     

Spectral and electrochemical studies of bis(diimine)copper(II) complexes in anionic, cationic and nonionic micelles

The spectral and redox behavior of bis(diimine)copper(II) complexes, where diimine is bipyridine, 1,10-phenanthroline, 4-methyl-1,10-phenanthroline, 5-methyl-1,10-phenanthroline, 5-nitro-1,10-phenanthroline, 4,7-dimethyl-1,10-phenanthroline, 5,6-dimethyl-1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, 3,4,7,8-tetramethyl-1,10-phenanthroline and dipyrido-[3,2-d:2',3'-f]-quinoxaline, are significantly different in aqueous and in aqueous SDS, CTAB and Triton X-100 micellar solutions. The (1)H NMR spectral study in aqueous (D(2)O) and aqueous micelles reveals that the Cu(II) complexes interact more strongly with SDS than with CTAB and Triton X-100 micelles and at sites on SDS micelles different from those on the latter. Ligand Field spectral studies reveal that the complexes exist as the dicationic aquated species [Cu(diimine)(2)(H(2)O)(2)](2+), which interacts strongly with the anionic SDS micelles through columbic forces. However, they exist as [Cu(diimine)(2)(H(2)O)Cl](+) and/or [Cu(diimine)(2)H(2)] located in the hydrophobic microenvironments in Triton X-100 and CTAB micelles. The attainment of reversibility of the redox systems in the micellar microenvironments is remarkable and this illustrates that the Cu(II) and Cu(I) species undergo stereochemical changes suitable for reversible electron-transfer. The remarkable differences in spectral and electrochemical properties of Cu(II) complexes in aqueous and aqueous micellar solutions illustrate that the complexes are nestled largely within the micellar environments and imply that the accessibilities of the complexes to electron-transfer are different and are dependent on the nature of micelles as well as the nature and hydrophobicity of the diimine ligands.     

Effect of di-2-ethylhexyl sodium sulfosuccinate reversed micelles on the iron-tetrasulfonatophthalocyanine-catalyzed fluorogenic oxidation reaction of L-tyrosine with hydrogen peroxide.

The catalytic behavior of iron tetrasulfonatophthalocyanine (FeTSPc) for the oxidation reaction of L-tyrosine with H2O2 in a di-2-ethylhexyl sodium sulfosuccinate (AOT) reversed-micellar system (AOT/cyclohexane) was studied. It was indicated that the reversed micelles could not only enhance the catalytic activity of FeTSPc, but could also increase the fluorescence intensity of the product. Factors that may influence the catalytic reaction, including the concentration of AOT, the cosolubilized water, temperature and pH, were further examined. The possibility of its analytical application was also tested. Experimental results show that the calibration graphs for the determinations of FeTSPc and H2O2 under optimum conditions are linear over the range of 1.0 x 10-8 - 1.0 x 10(-6) mol L(-1) and 0.0 - 3.0 x 10(-6) mol L(-1), respectively, with detection limits of 1.1 x 10(-9) mol L(-1) and 3.1 x 10(-9) mol L(-1) for FeTSPc and H2O2, respectively.     

反相胶束介质中敏化双乙酰室温磷光——-α-萘乙酸为敏化剂

本文报道了AOT-C6H12-H2O反相胶束介质中α-萘乙酸(α-NAA)敏化双乙酰(BIAC)的室温磷光。详细讨论了琥珀酸二(2-乙基己基)酯磺酸钠(AOT)浓度和水泡大小(W值)对敏化磷光的影响。吸收、发光性质和微粘度性质的实验表明AOT浓度对敏化磷光强度的影响由敏化磷光寿命、能量转移效率和Poisson分布决定; 一定范围内, 随着水浓度增大, 由于粘度下降和内腔半径增大作用的相互抵销, 水泡大小仅有微弱影响。当W([H2O]/[AOT])大于20后, 内腔半径增大起主要作用, 敏化磷光强度快速下降。与普通SDS胶束相比, 磷光强度约增强13倍, 检出限约下降一个数量级。建立了灵敏的测定α-萘乙酸和双乙酰的敏化室温磷光法, 检出限分别达2.0×10^-^8mol.dm^-^3(α-NAA)和8.5×10^-^9mol.dm^-^3(BIAC)。     

Effects of bile salts on percolation and size of AOT reversed micelles

The effects of two trihydroxy bile salts, sodium taurocholate (NaTC) and 3-[(3-cholamidylpropyl)dimethylammonio]-1-propane sulfonate (CHAPS), on the size, shape and percolation temperature of reversed micelles formed by sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in isooctane were studied. The percolation temperature of the reversed micelles decreased upon inclusion of bile salts, indicating increased water uptake. Dynamic light scattering (DLS) measurements showed consistent enlargement of reversed micelles upon addition of the bile salts; the hydrodynamic radius increased sixfold in the presence of 10 mM CHAPS and doubled in the presence of 5 mM NaTC. Inclusion of the enzyme yeast alcohol dehydrogenase (YADH) increased the percolation temperature and distorted the spherical structure of the AOT reversed micelles. The spherical structure was restored upon addition of bile salt. These results may help to explain the increase in activity of YADH in AOT reversed micelles upon addition of bile salts.     

Resiliently spherical micelles of alkyltrimethylammonium surfactants with multivalent, hydrolyzable counterions

A series of C(12)-C(16) alkyltrimethylammonium surfactants with hydrolyzable phosphate (PO(4)(3-), HPO(4)(2-), and H(2)PO(4)(-)), oxalate (HC(2)O(4)(-) and C(2)O(4)(2-)), and carbonate (HCO(3)(-) and CO(3)(2-)) counterions have been prepared, and their micellar solution behavior has been characterized. Critical micelle concentrations were measured using electrical conductivity and were found to depend on both the counterion and its hydrolysis state. All monovalent counterions bind less strongly to the micelle surface than does bromide or chloride, whereas multivalent species bind more strongly. Small-angle neutron scattering reveals that, unlike alkyltrimethylammonium bromides and chlorides, micelles are small and spherical in the presence of hydrolyzable counterions of all valences and remain spherical even in the presence of added electrolyte. This is consistent with the strong solvation of even strongly bound hydrolyzable counterions, which prevents the screening of repulsions between adjacent headgroups necessary for sphere-cylinder transformations. Salts of multivalent hydrolyzable counterions could thus be used to control the micelle structure in novel ways.     

NMR研究溶液中正十四烷基硫酸钠/正十四烷基聚氧乙烯醚(3)表面活性剂之间的相互作用

采用¹HNMR弛豫、自扩散系数和二维相敏(2DNOESY)实验研究了正十四烷基硫酸钠[n-CH₃(CH₂)₁₃OSO₃Na(STS)]和正十四烷基聚氧乙烯醚(3)[n-CH₃(CH₂)₁₃O(C₂H₄O)₃H(C₁₄E₃)]在溶液中的自聚集以及二者混合后的相互作用.结果表明,STS与C₁₄E₃混合后存在相互作用,并形成混合胶束;弛豫实验表明,混合胶束中STS疏水链质子运动更加受阻,C₁₄E₃的α-(4″)和β-CH₂(3″)处链堆积紧密.C₁₄E₃的亲水端(CH₂CH₂0)₃链卷曲紧贴在疏水壳表面外链堆积较紧密处.自扩散系数测量表明,混合胶束比单一阴离子表面活性剂形成的胶束大.单一非离子型胶束和混合胶束的亲水端(CH₂CH₂0)₃(5″)链构成相应较软和松散的外壳.单一C₁₄E₃在极性溶剂氯仿溶液中,质子运动比在水中自由度大,但2DNOESY谱中出现了少量分子间的交叉峰,也可能形成了一些小的聚集体.     

Hydrogen ion titration of alkyldimethylamine oxides by 13C and 1H NMR and conventional methods

In the hydrogen ion titration of micelles, the degree of ionization of the micelle at a given pH has to be evaluated to obtain a pKa value of micelles (Ka being the proton dissociation constant) at the pH. We compared the degree of ionization obtained from 13C and 1H NMR spectra with that obtained from the stoichiometric method. We used dodecyldimethylamine oxide (C12DMAO) and hexyldimethylamine oxide (C6DMAO) to examine the titration behavior of micelles and monomers, respectively. We determined pKa values of amine oxides both in H2O and D2O. As to the monomer (C6DMAO), the degree of ionization from NMR, alpha(NMR), coincided with that from the conventional stoichiometric method alpha. The difference of pK1 of amine oxide monomer between D2O and H2O was about 0.5: pK1(D) approximately pK1(H) + 0.5. The difference was about the same as that for carboxylic acids. As to the C12DMAO micelle, alphaNMR did not coincide with alpha over a considerable range of alpha. The NMR chemical shift might be influenced by micellar structure changes induced by the ionization, such as the sphere-to-rod transition. The intrinsic logarithmic dissociation constants of the micelle were 5.9+/-0.1 for H2O, and 6.5+/-0.1 for D2O.     

Theory of surface micelles of semifluorinated alkanes

Surface structures of semifluorinated alkanes F(CF(2))(n)(CH(2))(m)H (referred to as FnHm) spread on the air/water interface are investigated theoretically. The study is focused on the disklike surface micelles that were recently identified by AFM and scattering techniques at sufficiently high surface concentrations. We show that (1) the micelles emerge as a result of liquid/liquid (rather than liquid/gas) phase separation in the Langmuir layer; (2) the micelles are islands of the higher-density phase with roughly vertical orientation of FnHm molecules (F-parts extend toward air, H-parts toward water) and the matrix is the lower density-phase where the FnHm diblocks are nearly parallel to the water surface; (3) the micelles and the hexagonal structure they form are stabilized by the electrostatic interactions which are mainly due to the vertical dipole moments of the CF(2)- CH(2) bonds in the vertical phase; and (4) the electrostatic repulsive interactions can serve to suppress the micelle size polydispersity.     

Effects of temperature, salt, and deuterium oxide on the self-aggregation of alkylglycosides in dilute solution. 2. n-Tetradecyl-beta-D-maltoside

The effects of salt, temperature, and deuterium oxide on the self-aggregation of n-tetradecyl-beta-d-maltoside (C(14)G(2)) in dilute solution have been investigated by static light scattering, dynamic light scattering (DLS), small-angle neutron scattering (SANS), tensiometry, and capillary viscometry. SANS data show that the micelles can be described as relatively flexible polymer-like micelles with an elliptical cross section, at least at temperatures between 35 and 50 degrees C. The micelles grow in one dimension with increasing temperature and concentration. DLS and viscometry data suggest that the micelle size reaches a maximum at 60-70 degrees C. Comparison of DLS data in D(2)O and H(2)O shows that the micelles are larger in the former case. The effect of salt on the micelle size was found to follow the Hofmeister series. Thus, at constant salt concentration, the micelle size decreases according to the sequence SO(4)(2)(-) > Cl(-) > NO(3)(-) > I(-) > SCN(-), where I(-) and SCN(-) act as salting-in anions. From tensiometric data, it can be concluded that the temperature effects on micelle morphology do not correlate directly with those on unimer solubility. Rather, the temperature effect on the hydrocarbon chain conformation seems to be decisive for the micelle morphology. At constant temperature, on the other hand, the effect of salt and deuterium isotope is attributable to changes in effective headgroup area, including intermolecular interactions and water of hydration.     

Gas phase reactions between acetylene radical cation and water. energies, structures and formation mechanism of C2H3O+ and C2H4O+* ions

Reactions of the acetylene radical cation (C2H2(+*)) with H2O were investigated using ion mobility mass spectrometry. The primary products are the C2H3O(+) and C2H4O(+*) ions, produced with an overall rate coefficient k(300 K) = 2(+/-0.6) x 10(-11) cm(3) s(-1) that increases with decreasing temperature. The C2H4O(+*) (adduct) vs C2H3O(+) (H loss) ratio also increases with decreasing temperature, and with increasing third-body pressure. Ab initio calculations on the products showed seven stable C2H3O(+) isomers and eleven stable C2H4O(+*) isomers. In the C2H4O(+*) adduct channel, the reactivity and energetics suggest that the adduct is the H2C=CHOH(+*) (vinyl alcohol) ion. In the C2H3O(+) channel, the H loss occurs exclusively from water. The C2H3O(+) product ion undergoes slow deprotonation by water to form H(+)(H2O)n clusters. The reactivity, combined with energetics, suggests that the protonated ketene CH2COH(+) is the most likely observed C2H3O(+) ion probably with some contribution from the cyclic c-CH2CHO(+) ion.     

Transformations of poly(methoxy hexa(ethylene glycol) methacrylate)-b-(2-(diethylamino)ethyl methacrylate) block copolymer micelles upon metalation

Micelle transformations upon metalation (i.e., incorporation of metal compounds and metal nanoparticle formation) in poly(methoxy hexa(ethylene glycol) methacrylate)-block-poly((2-(diethylamino)ethyl methacrylate)), PHEGMA-b-PDEAEMA, solutions have been studied using transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS). Three different methods for the formation of metalated micelles are compared: (A) dissolution of the block copolymers in pure water followed by incorporation of platinic acid (H(2)PtCl(6).6H(2)O), (B) micellization in acidic molecular solutions of block copolymers induced by interaction of the protonated amino groups with the PtCl(6)(2)(-) ions, and (C) incorporation of metal species in pH-induced micelles. The latter method leads to well-defined metalated micelles of 22-25 nm diameter containing nanoparticles with diameters of 1.3-1.5 nm. No nanoparticle aggregation is observed. Good agreement is obtained for the sizes of the platinic acid-containing micelles assessed by TEM and PCS.