Vaporisation of a Dicationic Ionic Liquid Revisited

The vaporization of a dicationic ionic liquid at moderate temperatures and under reduced pressures —recently studied by line‐of‐sight mass spectrometry—was further analyzed using an ion‐cyclotron resonance mass spectroscopy technique that allows the monitoring of the different species present in the gas phase through the implementation of controlled ion–molecule reactions. The results support the view that the vapour phase of an aprotic dicationic ionic liquid is composed of neutral ion triplets (one dication attached to two anions). Molecular dynamics simulations were also performed in order to explain the magnitude of the vaporization enthalpies of dicationic ionic liquids vis‐à‐vis their monocationic counterparts.     

色谱分析中离子液体的应用及其测定

离子液体作为一种优良的溶剂越来越受到人们的关注。由于离子液体特殊的物理化学性质使其在色谱分析中也得到了较广泛的应用。本文综述了离子液体在气相色谱、高效液相色谱和毛细管电泳中的应用,其中包括离子液体作为气相色谱的固定相、高效液相色谱的固定相及流动相添加剂和毛细管电泳的电解质添加剂等,并对离子液体的色谱分离检测作了详细介绍。     

Influence of the ionic liquid/gas surface on ionic liquid chemistry

Applications such as gas storage, gas separation, NP synthesis and supported ionic liquid phase catalysis depend upon the interaction of different species with the ionic liquid/gas surface. Consequently, these applications cannot proceed to the full extent of their potential without a profound understanding of the surface structure and properties. As a whole, this perspective contains more questions than answers, which demonstrates the current state of the field. Throughout this perspective, crucial questions are posed and a roadmap is proposed to answer these questions. A critical analysis is made of the field of ionic liquid/gas surface structure and properties, and a number of design rules are mined. The effects of ionic additives on the ionic liquid/gas surface structure are presented. A possible driving force for surface formation is discussed that has, to the best of my knowledge, not been postulated in the literature to date. This driving force suggests that for systems composed solely of ions, the rules for surface formation of dilute electrolytes do not apply. The interaction of neutral additives with the ionic liquid/gas surface is discussed. Particular attention is focussed upon H(2)O and CO(2), vital additives for many applications of ionic liquids. Correlations between ionic liquid/gas surface structure and properties, ionic liquid surfaces plus additives, and ionic liquid applications are given.     

Vapourisation of ionic liquids

Eight common imidazolium based ionic liquids have been successfully evaporated in ultra-high vacuum, their vapours analysed by line of sight mass spectrometry and their heats (enthalpy) of vapourisation determined. They were found to evaporate as ion pairs, with heats of vapourisation which depend primarily on the coulombic interactions within the liquid phase and the gas phase ion pair. An electrostatic model is presented relating the heats of vapourisation to the molar volumes of the ionic liquids.     

Absorption and Oxidation of Nitrogen Oxide in Ionic Liquids

A new strategy for capturing nitrogen oxide, NO, from the gas phase is presented. Dilute NO gas is removed from the gas phase by ionic liquids under ambient conditions. The nitrate anion of the ionic liquid catalyzes the oxidation of NO to nitric acid by atmospheric oxygen in the presence of water. The nitric acid is absorbed in the ionic liquid up to approximately one mole HNO₃ per mole of the ionic liquid due to the formation of hydrogen bonds. The nitric acid can be desorbed by heating, thereby regenerating the ionic liquid with excellent reproducibility. Here, time‐resolved in‐situ spectroscopic investigations of the reaction and products are presented. The procedure reveals a new vision for removing the pollutant NO by absorption into a non‐volatile liquid and converting it into a useful bulk chemical, that is, HNO₃.     

Improving Mass Transfer in Gas-Liquid by Ionic Liquids Dispersion

This study investigates effects of dispersed ionic liquids on chemical absorption of CO₂ in alkanolamine aqueous solution. Oil-in-water emulsion has been prepared, whose continuous phase is trethanol amine aqueous solution, and dispersed phase is an ionic liquid, 1-octyl-3methyl imidazole six phosphate fluoride. The morphololgy of dispersion has been observed by visual method. Absorption rates are linearly fitted based on experimental data. Results show that a mass transfer enhancement has been realized by ionic liquids dispersion. The collaborative action of hydrodynamic effect and shuttle effect is proved to be the main mechanism that ionic liquids dispersion enhances gas absorption. The research indicates that dispersed ionic liquids can bring some advantages, higher absorption rate, lower corrosion for equipment, and higher regeneration efficiencies.     

Do all the protic ionic liquids exist as molecular aggregates in the gas phase?

According to an EI-MS study of 1,1,3,3-tetramethylguanidium-based protic ionic liquids (PILs), it has been concluded that not all PILs exist as molecular aggregates in the gas phase. The detection of both ions of m/z 115.0 and m/z 116.0 for the 1,1,3,3-tetramethylguanidinium trifluoromethylsulfonate (TMGS) protic ionic liquid indicates that both the molecular and ionic aggregates co-exist in the gas phase, which is to say that the TMGS may also evaporate via the ionic aggregates just like aprotic ionic liquids. Furthermore, investigation on triethylamine-based and 1-methylimidazole-based PILs confirmed that the gas phase structure of PILs depends on both the acidity and basicity of the corresponding acid and base.     

Enhanced resolution of Mentha piperita volatile fraction using a novel medium‐polarity ionic liquid gas chromatography stationary phase

The evaluation of a novel medium‐polarity ionic‐liquid‐based gas chromatography column, SLB‐IL60, towards the analysis of a complex essential oil, namely, a peppermint essential oil sample, is reported. The SLB‐IL60 30 m column was subjected to bleeding measurements, by means of conventional gas chromatography with mass spectrometry. The SLB‐IL60 column was then evaluated in the analysis of pure standard compounds, chosen as typical constituents of peppermint essential oil. Resolution and peak symmetry (expressed as tailing factors at 10% of peak height) were measured and the results were compared to those obtained on the most widely used columns in such an application, namely a medium‐polarity [100% poly(ethyleneglycol)] stationary phase, and an apolar 5% diphenyl/95% dimethyl siloxane. The final part of the evaluation was dedicated to the gas chromatography with mass spectrometry analysis of a peppermint essential oil sample and again the data were compared to those obtained on the 100% poly(ethyleneglycol) and the 5% diphenyl/95% dimethyl siloxane phase. Linear retention indices were determined for all the identified components on the ionic liquid capillary.     

Selectivity of guanidinium ionic liquid for capillary gas chromatography

<正>A guanidinium ionic liquid,N,N,N',N'-tetrahexyl-N",N"-dimethylguanidinium bis(trifluoromethane)sulfonylimide(THDMGNTf_2), was synthesized and used as stationary phase for capillary gas chromatography.In comparison with imidazolium ionic liquid stationary phase,the present new stationary phase exhibits quite different selectivity and behaves more like a low polar stationary phase.The guanidinium ionic liquid of THDMG-NTf_2 exhibited better separation of Grab test mixture than imidazolium ionic liquid of 1-octyl-3-butylimidazolium bis(trifluoromethane)sulfonylimide(OBIM-NTf_2).Solvation parameter model was also used to evaluate the selectivity of THDMG-NTf_2.Additionally,essential oil of Magnolia biondii Pamp was analyzed to further evaluate the selectivity of THDMG-NTf_2 for a sample of complicated components.Satisfactory separation of the essential oil was achieved on a THDMG-NTf_2 column(10 m) while using a commercial column(30 m) as reference.The present study shows that the guanidinium ionic liquid possesses novel chromatographic selectivity and has great potential for wide applications.     

The structure of geminal imidazolium bis(trifluoromethylsulfonyl)amide ionic liquids: a theoretical study of the gas phase ionic complexes

In this work we report molecular mechanics and ab initio calculations on the geminal di-imidazolium bis(trifluoromethylsulfonyl)amide ionic liquid in the gas phase. We report the likely energetically preferred geometries of the ionic complex and its main features in terms of charge distribution, electronic density, structure, and energetics. We find that the gas phase structure of the ionic complex is quite compact and that the alkyl chain connecting the two imidazolium charged rings is strongly bent in order to maximize their electrostatic interactions with the two anions.     

Ionic Liquid–Liquid Extraction and Supported Liquid Membrane Analysis of Lipophilic Wood Extractives from Dissolving-Grade Pulp

In this study, the extraction of lipophilic wood extractives from dissolving pulp samples using ionic liquid–liquid extraction and a two phase hollow fibre supported liquid membrane was investigated. Ionic liquids are capable of dissolving a range of organic and polymeric compounds and are biodegradable, with a negligible vapour pressure. Pulp samples were dissolved in a suitable amount of molten 1-butyl-3-methylimidazolium chloride to give 5 % cellulose solution. Pure cellulose was regenerated by adding water and filtered off. The ionic liquid-aqueous filtrate was first extracted for lipophilic extractives using liquid–liquid extraction. Then, a two phase hollow fibre supported liquid membrane extraction of lipophilic extractives was performed to extract the derivatized compounds prior to analysis by gas chromatography mass spectrometry. The operational parameters of this sample preparation approach were optimised using sterols and fatty acid methyl esters. The variation of enrichment factors and extraction efficiency with respect to liquid membrane, extraction time, stirring speed and sample pH were observed and used to get the optimal parameters. The approach was used in the analysis of oxygen bleached dissolving pulp samples in which main compounds identified were fatty acids, sterols, fatty alcohols, steroid hydrocarbons and ketones. These compounds were similar to those obtained using molecular solvent extraction method, which indicated the absence of chemical reaction between extractives and ionic liquid used.

     

The antioxidant-activity-integrated fingerprint: an advantageous tool for the evaluation of quality of herbal medicines

A simple, rapid, solventless method for the determination of trihalomethanes (THMs) (chloroform, bromodichloromethane, dibromochloromethane and bromoform) in water samples is presented. The analytes are extracted from the headspace of the aqueous matrix into a 2 microL drop of the ionic liquid 1-octyl-3-methyl-imidazolium hexafluorophosphate working at 30 degrees C for 30 min. The separation and detection of the target compounds is accomplished by gas chromatography/mass spectrometry owing to the use of an interface that efficiently transfers the analytes extracted in the ionic liquid drop to the gas chromatograph while preventing the ionic liquid from entering the column. The detection limits obtained are below the values compelled by the legislation, ranging from 0.5 microg L(-1) for chloroform and bromodichloromethane to 0.9 microg L(-1) for dibromochloromethane. The use of ionic liquid in the extraction procedure avoids the use of organic solvents and leads to relative standard deviations that range from 3.1% to 4.8%.     

Gas–liquid mass transfer in the presence of ionic surfactant: effect of counter‐ions and interfacial turbulence

This work investigated the effect of counter‐ions and interfacial turbulence on oxygen transfer from gas to liquid phase containing ionic surfactant, and experiments were performed in a mechanically stirred reactor with flat gas–liquid interface. Counter‐ions in terms of hydration ability and polarizability influence the interfacial coverage of ionic surfactants (i.e. cetytrimethylammonium bromide (CTAB) and cetytrimethylammonium chloride) with the same hydrocarbon chain length, producing hindrance but in different extent on oxygen transfer. The addition of electrolyte (NH₄Br) substantially reduced the interfacial tension and surface charge of micelles (zeta potential) in CTAB system, and this salt effect greatly compressed interfacial double layer leading to gas transfer inhibition. The surface charge, aggregation number as well as stability of micelles formed above the critical micelle concentration could also alter interfacial configuration of surfactant layer reflected by gas absorption rate. Liquid turbulence was analyzed to decide the role of surfactant present in water on gas–liquid mass transfer, since Marangoni instability effect playing positive role should be taken into consideration under moderate liquid flow, while in turbulent system, contribution of Marangoni effect became overshadowed and consequently surfactant pose ‘barrier’ effect on gas transfer due to its surface active nature. Copyright © 2013 John Wiley & Sons, Ltd.     

Evaluation of ionic liquid stationary phases for one dimensional gas chromatography-mass spectrometry and comprehensive two dimensional gas chromatographic analyses of fatty acids in marine biota

Ionic liquid stationary phases were tested for one dimensional gas chromatography-mass spectrometry (GC-MS) and comprehensive two dimensional gas chromatography (GC×GC) of fatty acid methyl esters from algae. In comparison with polyethylene glycol and cyanopropyl substituted polar stationary phases, ionic liquid stationary phases SLB-IL 82 and SLB-IL 100 showed comparable resolution, but lower column bleeding with MS detection, resulting in better sensitivity. The selectivity and polarity of the ionic liquid phases are similar to a highly polar biscyanopropyl-silicone phase (e.g. HP-88). In GC×GC, using an apolar polydimethyl siloxane×polar ionic liquid column combination, an excellent group-type separation of fatty acids with different carbon numbers and number of unsaturations was obtained, providing information that is complementary to GC-MS identification.     

Influence of water on the surface of the water-miscible ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate: a sum frequency generation analysis

Sum frequency generation spectroscopy (SFG) was used to study the influence of water on the surface of the water-miscible ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate. The orientation of the cation at the gas-liquid interface was analyzed as a function of ionic liquid concentration in water for concentrations from 0 to 1 mole fraction of the ionic liquid. The cation was found to be oriented with the imidazolium ring nearly parallel to the surface plane with a tilt angle > or = 70 degrees when the ionic liquid was dry. Furthermore, no noticeable change in the orientation was observed when high concentrations of water were mixed with the ionic liquid. The cation butyl chain is projecting into the gas phase with a CH(3) tilt angle of 54 +/- 2 degrees when the ionic liquid is dry and 46 +/- 4 degrees when mixed with water. Water is oriented at the surface only for concentration < or = 0.02 mole fraction of the ionic liquid. At higher ionic liquid concentrations (mole fractions > or = 0.05) the gas-liquid interface resembles that of the pure ionic liquid.     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Improving carbon dioxide solubility in ionic liquids

Previously we showed that CO2 could be used to extract organic molecules from ionic liquids without contamination of the ionic liquid. Consequently a number of other groups demonstrated that ionic liquid/CO2 biphasic systems could be used for homogeneously catalyzed reactions. Large differences in the solubility of various gases in ionic liquids present the possibility of using them for gas separations. More recently we and others have shown that the presence of CO2 increases the solubility of other gases that are poorly soluble in the ionic liquid phase. Therefore, a knowledge and understanding of the phase behavior of these ionic liquid/CO2 systems is important. With the aim of finding ionic liquids that improve CO2 solubility and gaining more information to help us understand how to design CO2-philic ionic liquids, we present the low- and high-pressure measurements of CO2 solubility in a range of ionic liquids possessing structures likely to increase the solubility of CO2. We examined the CO2 solubility in a number of ionic liquids with systematic increases in fluorination. We also studied nonfluorinated ionic liquids that have structural features known to improve CO2 solubility in other compounds such as polymers, for example, carbonyl groups and long alkyl chains with branching or ether linkages. Results show that ionic liquids containing increased fluoroalkyl chains on either the cation or anion do improve CO2 solubility when compared to less fluorinated ionic liquids previously studied. It was also found that it was possible to obtain similar, high levels of CO2 solubility in nonfluorous ionic liquids. In agreement with our previous results, we found that the anion frequently plays a key role in determining CO2 solubility in ionic liquids.     

Encapsulated ionic liquids (ENILs): from continuous to discrete liquid phase

Encapsulated ionic liquid (ENIL) material was developed, consisting of ionic liquid (IL) introduced into carbon submicrocapsules. ENILs contain >85% w/w of IL but discretized in submicroscopic encapsulated drops, drastically increasing the surface contact area with respect to the neat fluid. ENIL materials were here tested for gas separation processes, obtaining a drastic increase in mass transfer rate.