Influence of plant additives on properties of polymers

The chemical composition of the fatty mass representing a waste from the oils and fats industry has been studied. It has been shown that of the fatty acids the 18:2 species possesses a pronounced stabilizing action on polymers, and of polyolefins the least oxidized part of the gossypol pigments, while the fatty mass is a more effective stabilizer than its individual components.     

Influence of additives on the structure and properties of polymers

Investigations into the transformation of hexagonal into monoclinic modification in isotactic polypropylene (iPP) were carried out. The hexagonal phase () was obtained by crystallization from a melt of iPP samples containing small molecular compounds (additives). A decline in the amount of-modification and changes of dimensions of ordering areas, perpendicular to the chain axes of iPP, was analysed at various temperatures and times of heating.The interdependence between the structure of additives and the amount of-phase occurring and also the stability of this modification during thermal treatment was observed.Obtained results indicated that only some additives play the role of moderating agents for the phase transition process.A preliminary report of this work has been presented at XIII Congress of the International Union of Crystallography (9–18 August 1984).     

添加剂对焦磷酸盐镀铜性能的影响

铜镀层的外观呈铜红色、柔软、孔隙少,常用作钢铁件多层镀铬的中间层和钢铁件镀锡和镀银的底层,以提高基体金属和表面镀层之间的结合力.     

Optical characterization of polycarbonate: Influence of additives on optical properties

In laser transmission welding of thermoplastics the optical properties of the joining parts determine the quality of the welding result. Especially, the scattering of laser radiation in the transparent welding part has an impact on weld seam properties. This scattering is caused by additives. For polycarbonate (PC) with different additives the transmittance, the reflectance and the collimated transmittance are measured with a UV‐VIS‐NIR spectrometer. From this data, the optical properties, such as scattering coefficient, absorption coefficient, and anisotropy factor are calculated. The calculations are made with the aid of the four‐flux model of radiation transport in the diffusive approximation. The results show that the additives have a significant influence on the scattering coefficient. For most additives under consideration the scattering is forward directed, which means that most of the radiation is transmitted into the absorbing welding part. However, the power density distribution of the transmitted radiation may differ significantly from PC without additives. So, the weld seam may also differ due to different additives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 451–455, 2010     

Aging effects on fire-retardant additives in polymers

Extensive thermal aging experiments have been conducted on (i) ethylene-propylene rubber (EPR) formulations containing various commercial halogenated-hydrocarbon fire-retardant additives together with Sb₂O₃, and (ii) on chlorosulfonated polyethylene (CSPE) formulations with and without added Sb₂O₃. Significant losses of both chlorine and antimony are found on aging, dependent upon the ability of the particular halocarbon to undergo intramolecular dehydrohalogenation. The stoichiometry indicates antimony volatilization as SbCl₃. Arrhenius treatment of the data for the EPR formulation which undergoes the most rapid loss gives an overall activation energy of 34 kcal/mol for antimony volatilization and indicates that fire-retardant loss should become appreciable only at temperatures significantly above ambient (i.e., 70°C). Oxygen index flammability measurements showed moderately increased flammability for certain aged EPR samples, but showed significantly decreased flammability for aged CSPE which was correlated with the loss of other volatile components from the formulation.     

Influence of fluorinated acids bonding on surface properties of crosslinked epoxy-based polymers

Two series of crosslinked fluorinated epoxy-based materials containing variable fluorine contents (from 0 to 6 wt.% F) were prepared using formulations based on a fluorinated acid (FA), epoxy monomer and a diamine. The epoxy monomer was based on diglycidyl ether of bisphenol A (DGEBA) while the curing agent was propyleneoxide diamine (Jeffamine D-230). The selected FA were: 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptanoic acid (FA1), perfluoro-heptanoic acid (FA2), and perfluoro-nonanoic acid (FA3). One of the series synthesized, FA-DGEBA/Jeffamine, is characterized by covalent attachment of the FA to the polymer by an ester bond. The other series, FA-Jeffamine/DGEBA, is characterized by ionic interaction between FA and polymer chains. The influence on thermal and surface properties of the architecture and chain-length of FA, and the nature of the linkage between FA and network precursors, was analyzed and discussed. It was found that both series showed high oleophobicity, but depending on the linkage between the fluorinated acid and the network, it was possible to develop hydrophobic or hydrophilic materials. The fluorine enrichment with the perfluoroalkyl substitutions was proved by XPS. By this technique it was possible also to analyze the concentration of ammonium groups at the surface.     

Influence of flame retardant additives on the processing characteristics and physical properties of ABS

Antimony trioxide (Sb₂O₃) is a common additive in flame retardant formulations and a study has been made to determine the effects of adding different grades into ABS polymer either alone or with commercial brominated materials bis(Tribromophenoxy)ethane (BTBPE) or Tetrabromobisphenol A (TBBA). The results consider mechanical, microscopical and flame retardant properties, and the effects of different Sb₂O₃ grades with average particle sizes of 0.1μm, 0.52μm and 1.31μm. The Sb₂O₃ was added at 4wt% loadings and the bromines at 20wt% loadings. Additions of different grades of antimony trioxide showed that standard grades (0.52 and 1.31μm) had a detrimental effect on impact and flexural properties when added at a 4wt% loading. The use of a new sub‐micron particle size product (0.1μm) had little effect on impact properties and only a slight detrimental effect on the flexural modulus and flexural strength when added to the ABS. Additions of either of the two brominated materials also caused a large drop in impact properties when added at 20wt% loadings. The addition of TBBA BA‐59P into ABS caused an increase in both flexural modulus and flexural strength which was contrary to expectations. When formulated with 4wt% 1.31μm Sb₂O₃ these bromine containing compounds suffered a further reduction in impact energies. Using the 0.1μm material improved both impact and flexural properties but impact values were still below those of unfilled ABS. The addition of the 0.1μm grade resulted in improvements in fire resistance as measured by the UL‐94 properties.     

Functional nanoscale additives for ultra-durable powder-coating polymers

Abstract  

Surface-modified titania nanoparticles were prepared and their suitability as additives for the long-term UV-photoprotection of polymer materials was investigated. It was demonstrated that the functionalization of nano-TiO₂ with different fatty acid and phosphonate-based grafting reagents has a beneficial effect on the long-term stability of polyester composites under accelerated weathering conditions. These results are of considerable interest for the development of robust organic–inorganic hybrid systems that can be utilized as transparent but UV-resistant protective layers for outdoor applications.     

Computer simulation studies of aggregates of associating polymers: Influence of low-molecular-weight additives solubilizing the aggregates

The structure of aggregates in solutions of chain molecules with associating groups at one of the ends is studied by Monte Carlo computer simulations using the bond fluctuation model. The main attention is paid to the influence of additives of low-molecular-weight solvent solubilizing the aggregates. It is shown that upon the addition of solvent the aggregates adopt a three-layer structure with the ‘lake’ of the solvent molecules in the central region surrounded by the layer of associating end-groups of polymer chains, which in turn is surrounded by the outer corona formed by the chain tails. The equilibrium form of the aggregates becomes close to that of a droplet of low-molecular-weight liquids. The regimes are found when the addition of the low-molecular-weight solvent stabilizes the multiplets and even induces the aggregate formation.     

Influence of phosphorus additives on the properties of Fe?Sb?O oxide catalysts

Modification of the surface of Fe–Sb–O oxide catalysts by phosphorus additives increases the yield of acrylonitrile in the oxidative ammonolysis of propylene, which can be attributed to the increase of the surface concentration of weakly acidic aprotic centers, viz. Sb³⁺ ions.

---

, --Sb³⁺.

     

Influence of additives on recycled polymer blends

Polymer systems based on polymer waste offer promising way to increase recycling in the society. Since fillers play a major role in determining the properties and behavior of polymer composites, recycled polymers can also be combined with fillers to enhance the stiffness and thermal stability. In this study, blends of recycled polyethylene and recycled polypropylene with mica and glass fiber were prepared by melt blending technique. The effect of the particle loading, filler type, and filler–matrix interaction on thermal degradation and thermal transition of processed systems were investigated. Thermogravimetric analysis, differential thermogravimetric analysis, and differential scanning calorimetry were used in this investigation. Comparative analysis shows that both fillers produced different effects on thermal properties of the processed systems. These results were confirmed by calculating the activation energy for thermal degradation and thermal transition using Kissinger and Flynn–Wall expressions.     

Dielectric absorption in hydrocarbon polymers with non-polar additives

Polypropylene films containing various non-polar additives including CCl₄, tetramethylsilane and CS₂ (99.9 or 99.8%) exhibit weak dielectric absorption at the temperatures where molecular tumbling motions are expected on the relevant timescale. The absorption possibly corresponds to rotational jumps of up to 90° between inequivalent orientations of the additive molecules as has been suggested for ammonium in alums.     

The role of additives in the recycling of polymers

The main problems in post-consumer plastics recycling are due to the degradation undergone by the polymers during processing steps and by the products during their lifetime and, for heterogeneous recycling, to the incompatibility of different polymers. To reduce the negative effects of the recycling steps, two main ways can be adopted for homogeneous materials: restabilization during the recycling to avoid or at least to slow the degradation and addition of fillers and modifiers capable of improving the performance of thermoplastic polymers without increasing the final cost of the secondary material. In the case of mixed plastics, compatibilization is the necessary step to obtain secondary materials with acceptable properties.     

Influence of chemical structure on the optical properties of new side-chain polymers containing cholesterol

Poly[1-(cholesteryloxyhexyloxy)ethylene] (PHET) and poly[1-(cholesteryloxycarbonyl-hexyloxy)ethylene] (PHES) were prepared by reacting poly(vinyl alcohol) with cholesteryloxyhexyloxy bromides (CHB) or cholesteryloxycarbonylhexyloxy bromides (CEHB), and their thermal and optical properties were investigated. PHET and PHES exhibited monotropic cholesteric phases; however, their thermal behaviours depended on the cholesteryl groups and alkylene spacers with different chemical structures. PHET did not display reflection colours over its entire cholesteric range, whereas PHES did display reflection colours. These results suggested that the thermal stability and helical twisting power (HTP) of these polymers strongly depend on the difference in the chemical structures of the flexible spacer via cholesterol. The mesophase properties of PHET and PHES differed substantially from those of poly(cholesteryl-ω-acryloyloxyalkanoates). The results indicate that the mode of chemical linkage between the side-chain group and the main chain as well as that between the alkylene spacer and side chain play important roles in determining the thermal stability, mesophorphic structure and HTP of the cholesteric mesophases.     

Influence of polymers on dust-related foam properties of sodium dodecyl benzene sulfonate with Foamscan

Foamability, liquid holdup, and foam appearance are key factors that determine dust control efficiencies. As the foam production method of the FoamScan instrument is similar to foaming device used for dust control, and its measurement means can satisfy the requirements of precise measuring, the FoamScan technology is adopted to explore the influence of xanthan gum (XG) and partial hydrolytic polyacrylamide (HPAM) on dust-related foam properties of sodium dodecyl benzene sulfonate (SDBS). It was found that with the increase of the polymer mass fraction, the liquid volume in the foam gradually increased. Additionally, the foaming time t₂₀₀ of the foaming agent decreased at first, then remained almost constant for both polymers, which indicated that the foamability and liquid holdup were enhanced by the addition of polymers into SDBS. In addition, the efficiencies of XG are higher than that of HPAM. The image analysis using the CSA software revealed that the mean radius formed by XG was smaller than that by HPAM and the number of bubbles was larger with XG than with HPAM. Thus, the XG foam has more area to contact with dust and could control dust better. The highly branched molecular structure and hydrogen bonds formed by XG played important roles in dust-related foam properties.     

Effectiveness of cell adhesive additives in different supramolecular polymers

Supramolecular motifs in elastomeric biomaterials facilitate the modular incorporation of additives with corresponding motifs. The influence of the elastomeric supramolecular base polymer on the presentation of additives has been sparsely examined, limiting the knowledge of transferability of effective functionalization between polymers. Here it was investigated if the polymer backbone and the additive influence biomaterial modification in two different types of hydrogen bonding supramolecular systems, that is, based on ureido-pyrimidinone or bis-urea units. Two different cell-adhesive additives, that is, catechol or cyclic RGD, were incorporated into different elastomeric polymers, that is, polycaprolactone, priplast or polycarbonate. The additive effectiveness was evaluated with three different cell types. AFM measurements showed modest alterations on nano-scale assembly in ureido-pyrimidinone materials modified with additives. On the contrary, additive addition was highly intrusive in bis-urea materials. Detailed cell adhesive studies revealed additive effectiveness varied between base polymers and the supramolecular platform, with bis-urea materials more potently affecting cell behavior. This research highlights that additive transposition might not always be as evident. Therefore, additive effectiveness requires re-evaluation in supramolecular biomaterials when altering the polymer backbone to suit the biomaterial application.     

Effect of random copolymer additives on the interfacial tension between incompatible polymers

Interfacial tensions γ were measured for mixtures of poly(methylphenylsiloxane) (4 kg/mol) and poly(dimethylsiloxane) (24 kg/mol) in the absence and in the presence of small amounts of the random copolymer poly(dimethylsiloxane-ran-methylphenylsiloxane) (89 mol-% of dimethylsiloxane units, 28 kg/mol) from 25 to 110°C. Approximately 1 wt.-% of the copolymer additive suffices to reduce γ from ca. 2.2 to 1.6 mN/m. The time dependence of the apparent γ value in the course of the attainment of equilibria also indicates surface acivity. The hypothesis is formulated that the efficiency of the random copolymer for a reduction of γ is bound to the condition that it is only sparingly soluble in both blend components.     

Influence of additives on the protoplasts electrofusion.

Various neutral or charged surface active substances were used for testing the influence of additives on the electrofusion of barley protoplasts. It was found that neutral surface active agents DX, TAGB, Span-80 and AEO-9 could promote the electrofusion. The positively charged surface active agents Bardac 2080, Bardac 2280 and amphoteric surface active agents dodecyl-propyl betaine and CAB betaine also promote the electrofusion, but at high concentration the electrofusion efficiency will reduce. The negatively charged polymer agents Cibacron blue DX, Fluoresceinylthiocarbamoyl DX, and active surface substances K12 and Carsonol TLS- presented negative effect. These phenomena were discussed from the view of adsorption of additives on the membrane and the interactions between protoplasts.