Enantioselective Rhodium-Catalyzed Pauson–Khand Reactions of 1,6-Chloroenynes with 1,1-Disubstituted Olefins

An enantioselective rhodium(I)-catalyzed Pauson–Khand reaction (PKR) using 1,6-chloroenynes that contain challenging 1,1-disubstituted olefins is described. In contrast to the previous studies with these types of substrates, which are only suitable for a single type of tether and alkyne substituent, the new approach results in a more expansive substrate scope, including carbon and heteroatom tethers with polar and non-polar substituents on the alkene. DFT calculations provide critical insight into the role of the halide, which pre-polarizes the alkyne to lower the barrier for metallacycle formation and provides the proper steric profile to promote a favorable enantiodetermining interaction between substrate and chiral diphosphine ligand. Hence, the chloroalkyne enables the efficient and enantioselective PKR with 1,6-enynes that contain challenging 1,1-disubstituted olefins, thereby representing a new paradigm for enantioselective reactions involving 1,6-enynes.     

Access to macrocyclic endocyclic and exocyclic allylic alcohols by nickel-catalyzed reductive cyclization of ynals

Ni-catalyzed reductive macrocyclizations of ynals are reported. Disubstituted alkynes afford either endocyclic or exocyclic allylic alcohols depending on the ligand. Phosphine ligands favor the formation of endocyclic olefins, whereas N-heterocyclic carbene ligands favor the formation of exocyclic olefins. Terminal alkynes provide 1,2-disubstituted olefins with N-heterocyclic carbene ligands.     

Higher Order Cuprate Species( Ⅱ )——Stereospecific Carbocupration of Terminal Alkynes and Its Synthetic Utility for ( ± )-Ipsenol and (E)-β-Farnesene

The stereospecific carbocupration of terminal alkynes via higher order cuprates to give 1,1'-disubstituted olefins with 99% configuration purity is described. Its synthetic utility as a general method for the preparation of substituted olefins is further illustrated by the direct synthesis of (±)-ipsenol and (E)-β-farnesene with highly geometric purity of the carbon-carbon double bond.     

Tandem hydroformylation/Fischer indole synthesis: a novel and convenient approach to indoles from olefins

[reaction: see text] A novel one-pot synthesis of indole systems via tandem hydroformylation/Fischer indole synthesis starting from olefins and arylhydrazines is described. This tandem procedure leads directly to 3-substituted indoles if unsubstituted phenylhydrazine is used and to 3,5- respectively 3,7-disubstituted indoles if para- or ortho-substituted arylhydrazines are used.     

2,3-Disubstituted indoles from olefins and hydrazines via tandem hydroformylation-Fischer indole synthesis and skeletal rearrangement

The tandem hydroformylation-Fischer indolisation protocol is used in the synthesis of 2,3-disubstituted indoles. After hydroformylation of selected olefins to form alpha-branched aldehydes in a one-pot procedure these are condensed with phenylhydrazine to give hydrazones. Upon acid-promoted [3,3]-sigmatropic rearrangement indolenine intermediates with quaternary centres in the 3-position are formed, which, after selective Wagner-Meerwein-type rearrangement of one of the substituents from the 3- to the 2-position, lead to 2,3-disubstituted indoles. Several olefins, bearing substituents with various functional groups, as well as cyclic olefinic systems are investigated.     

A simple and facile method for regio- and stereoselective bromoformyloxylation and bromoacetoxylation of olefins using NH4Br and oxone®

A mild and efficient protocol for the preparation of bromoformates as well as bromoacetates from olefins using NH₄Br and oxone® in nucleophile sources (DMF or DMA) without employing catalyst at room temperature is described. This method is facile, environmentally friendly and cost effective. A variety of terminal, internal and cyclic alkenes reacted smoothly to give the corresponding bromoformate and acetate products in good to excellent yields. Moreover, 1,2-disubstituted olefins provided moderate to excellent diastereoselectivity.     

Improved method for the diimide reduction of multiple bonds on solid-supported substrates

A mild and improved method for reducing multiple bonds on various resins with diimide is described. The simple procedure readily generates diimide from 2-nitrobenzenesulfonohydrazide and triethylamine at room temperature. A number of representative multiple bonds in various steric and electronic environments were examined, including polar double bonds such as carbonyl and azo, for ease and selectivity of reduction. A general trend of reactivity was identified which revealed, inter alia, that terminal olefins, 1,2-disubstituted olefins, electron-poor olefins, and terminal alkynes were the most easily reduced.     

Regio- and stereoselective co-iodination of olefins using NH4I and Oxone

A simple, efficient, and environmentally benign protocol for the synthesis of vicinal iodohydrins and iodoesters from olefins using NH₄I and Oxone in CH₃CN/H₂O (1:1) and dimethylformamide (DMF) / dimethylacetamide (DMA), respectively, without employing a catalyst at room temperature is described. Regio- and stereoselective iodohydroxylation and iodoesterification of various olefins with anti fashion, following Markonikov’s rule, was achieved and the corresponding products were obtained in good to excellent yields. In addition, 1,2-disubstituted olefins afforded excellent diastereoselectivity.     

Efficient synthesis of allylic azides and one-pot regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles from homoallyl alcohols

This protocol is for an expedient and operationally simple synthesis of allylic azides and one-pot synthesis of 1,4-disubstituted 1,2,3-triazoles from homoallyl alcohols. Synthesis of allylic azides involves the palladium-catalyzed hydroazidation of unactivated olefins with migration of double bond. This hydroazidation can be coupled to Cu(I) promoted 1,3-dipolar cycloaddition to afford the corresponding 1,4-disubstituted 1,2,3-triazoles.     

Palladium-catalyzed ring opening of azabicyclic olefins with organoindium reagents: a simple, clean, and efficient synthesis of functionalized cyclopentenes

Azabicyclic olefins undergo facile palladium-catalyzed ring opening with organoindium reagents affording trans-3,4-disubstituted hydrazinocyclopentenes in good to excellent yields.     

Iron(III) porphyrin catalyzed aziridination of alkenes with bromamine-T as nitrene source

[reaction: see text] Iron(III) porphyrin complexes Fe(Por)Cl are effective catalysts for aziridination of alkenes using bromamine-T as the nitrene source. The catalytic system can operate under mild conditions with alkenes as limiting reagents. The aziridination reaction is general and suitable for a wide variety of alkenes, including aromatic, aliphatic, cyclic, and acyclic olefins, as well as alpha,beta-unsaturated esters. For 1,2-disubstituted olefins, the reactions proceeded with moderate to low stereospecificity.     

Chlorination of various substrates in subcritical carbon tetrachloride

Various aliphatic hydrocarbons and the side chains of aromatic hydrocarbons were chlorinated in subcritical carbon tetrachloride. Chlorination of aromatic compounds including 1,4-disubstituted benzenes was investigated. Ketones and sulfones were stable under the employed conditions. Sulfoxides were converted into sulfides in a low to modest yields. The coupling adducts between olefins and carbon tetrachloride were obtained from the reactions of olefins.     

A stereoselective enyne cross metathesis

[reaction: see text] Intermolecular enyne metathesis reaction of alkynes with olefins catalyzed by second-generation Grubbs catalyst (1) proceeded stereoselectively under ethylene atmosphere to produce 1,3-disubstituted butadienes with E stereochemistry.     

Synthesis of 3,3-disubstituted oxindoles through Pd-catalyzed intramolecular cyanoamidation

The cyanoamidation of olefins was achieved. When N-(2-vinylphenyl)cyanoformamides were treated with palladium catalyst, intramolecular cyanoamidation took place to give corresponding 3,3-disubstituted oxindoles. P(t-Bu)₃ showed a remarkable effect on this reaction. When it was used with Pd(dba)₂, the reaction was completed in 15 min at 100 °C for many substrates. Furthermore, the enantioselective cyanoamidation was accomplished with Pd(dba)₂ and an optically active phosphoramidite to provide optically active 3,3-disubstituted oxindoles. Manipulation of the resulting oxindoles has been studied.     

A new route to synthesis of substituted pyrazoles through oxidative [3+2] cycloaddition of electron deficient alkenes and diazocarbonyl compounds

A collection of 3,5-disubstituted pyrazoles are constructed by the oxidative [3+2] cycloaddition of electron deficient terminal olefins with α-diazoesters and amides in the presence of Oxone and cetyltrimethyl ammonium bromide. The highlights of this protocol are; (i) shorter reaction time (ii) moderate to excellent yield (iii) good regioselectivity.     

Enantioselective Preparation of Arenes with β-Stereogenic Centers: Confronting the 1,1-Disubstituted Olefin Problem Using CuH/Pd Cooperative Catalysis

Arenes with β-stereogenic centers are important substructures in pharmaceuticals and natural products. We have developed an asymmetric anti-Markovnikov hydroarylation of 1,1-disubstituted olefins by dual palladium and copper hydride catalysis as a convenient and general approach to access these substructures. This efficient one-step process addresses several limitations of the traditional stepwise approaches. The use of cesium benzoate as a base and a common phosphine ligand for both the Cu- and Pd-catalyzed processes were important discoveries that allow these challenging olefin substrates to be efficiently transformed. A variety of aryl bromide coupling partners, including numerous heterocycles, were coupled with 1,1-disubstituted alkenes to generate arenes with β-stereogenic centers.     

Bifunctional compounds from reaction of alkoxy hydroperoxides with metal salts

Alkoxy hydroperoxides, obtained by ozonizing olefins in alcoholic solution, were treated with ferrous sulfate. C-C bond scission and radical formation was followed by dimerization of the radicals formed. Ozonides reacted similarly. Acyclic and cyclic olefins, including a cyclic enol ether, gave rise to a range of ,ω-disubstituted products in modest yields. By using ferric chloride, ω-chloro esters were obtained from the alkoxy hydroperoxides derived from olefinic esters.     

Asymmetric epoxidation of 1,1-disubstituted terminal olefins by chiral dioxirane via a planar-like transition state

Various 1,1-disubstituted terminal olefins have been investigated for asymmetric epoxidation using chiral ketone catalysts. Up to 88% ee has been achieved with a lactam ketone, and a planar transition state is likely to be a major reaction pathway.     

Enantioselective synthesis of 3,3-disubstituted oxindoles through Pd-catalyzed cyanoamidation

The first enantioselective cyanoamidation of olefins provides quick access to a variety of 3,3-disubstituted oxindoles. The combination of Pd(dba)2, an optically active phosphoramidite, and N, N-dimethylpropylene urea (DMPU) in decalin were found to be the best conditions.     

Hetero-cope-umlagerungen - v. ungewöhnlichemeta-umlagerung eines hetero-claisen-systems

The reactions of the sodium salt of 4 with imidoyl chlorides 5 give the olefins 7 via the expected Hetero-Claisen rearrangement. However 2,5-disubstituted hydroxamic acids 8 behave differently. In the reactions with 5b, products of a $\text{m}$-rearrangement are observed.