Aqueous two-phase system of an anionic gemini surfactant and a cationic conventional surfactant mixture

The aqueous two-phase system formed by the mixture of dodecyltrimethylammonium bromide (DTAB) with a gemini surfactant O,O′-bis(sodium 2-lauricate)-p-benzenediol (C₁₁pPHCNa) has been studied. Two two-phase regions were observed, one was a wide region in the cationic surfactant-rich side and the other in the vicinity of R = 1:1, where R is the mixing mole ratio of DTAB to C₁₁pPHCNa in global solution. Multi-lamellar vesicles are formed in the concentrated upper phase of cationic surfactant-rich systems and spherical aggregates in the concentrated bottom phase at R = 1:1. The microstructure of the solution and the phase behavior of the aqueous two-phase system strongly depended on the total concentration and the composition of the system.     

Palladium acetate complexes bearing chelating N-heterocyclic carbene (NHC) ligands: Synthesis and catalytic oxidative homocoupling of terminal alkynes

The imidazolium salts 1,1′-dibenzyl-3,3′-propylenediimidazolium dichloride and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazolium dichloride have been synthesized and transformed into the corresponding bis(NHC) ligands 1,1′-dibenzyl-3,3′-propylenediimidazol-2-ylidene (L₁) and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazol-2-ylidene (L₂) that have been employed to stabilize the Pd^II complexes PdCl₂(κ²-C,C-L₁) (2a) and PdCl₂(κ²-C,C-L₂) (2b). Both latter complexes together with their known homologous counterparts PdCl₂(κ²-C,C-L₃) (1a) (L₃ = 1,1′-dibenzyl-3,3′-ethylenediimidazol-2-ylidene) and PdCl₂(κ²-C,C-L₄) (1b) (L₄ = 1,1′-bis(1-naphthalenemethyl)-3,3′-ethylenediimidazol-2-ylidene) have been straightforwardly converted into the corresponding palladium acetate compounds Pd(κ¹-O-OAc)₂(κ²-C,C-L₃) (3a) (OAc = acetate), Pd(κ¹-O-OAc)₂(κ²-C,C-L₄) (3b), Pd(κ¹-O-OAc)₂(κ²-C,C-L₁) (4a), and Pd(κ¹-O-OAc)₂(κ²-C,C-L₂) (4b). In addition, the phosphanyl-NHC-modified palladium acetate complex Pd(κ¹-O-OAc)₂ (κ²-P,C-L₅) (6) (L₅ = 1-((2-diphenylphosphanyl)methylphenyl)-3-methyl-imidazol-2-ylidene) has been synthesized from corresponding palladium iodide complex PdI₂(κ²-P,C-L₅) (5). The reaction of the former complex with p-toluenesulfonic acid (p-TsOH) gave the corresponding bis-tosylate complex Pd(OTs)₂(κ²-P,C-L₅) (7). All new complexes have been characterized by multinuclear NMR spectroscopy and elemental analyses. In addition the solid-state structures of 1b·DMF, 2b·2DMF, 3a, 3b·DMF, 4a, 4b, and 6·CHCl₃·2H₂O have been determined by single crystal X-ray structure analyses. The palladium acetate complexes 3a/b, 4a/b, and 6 have been employed to catalyze the oxidative homocoupling reaction of terminal alkynes in acetonitrile chemoselectively yielding the corresponding 1,4-di-substituted 1,3-diyne in the presence of p-benzoquinone (BQ). The highest catalytic activity in the presence of BQ has been obtained with 6, while within the series of palladium-bis(NHC) complexes, 4b, featured with a n-propylene-bridge and the bulky N-1-naphthalenemethyl substituents, revealed as the most active compound. Hence, this latter precursor has been employed for analogous coupling reaction carried out in the presence of air pressure instead of BQ, yielding lower substrate conversion when compared to reaction performed in the presence of BQ. The important role of the ancillary ligand acetate in the course of the catalytic coupling reaction has been proved by variable-temperature NMR studies carried out with 6 and 7′ under catalytic reaction conditions.     

The structure and dynamic properties of mixed adsorption and penetration layers of α-dipalmitoylphosphatidylcholine/β-lactoglobulin at water/fluid interfaces

The interfacial tensions of mixed α-dipalmitoylphosphatidylcholine (DPPC)/β-lactoglobulin layers at the chloroform/water interface have been measured by the pendent drop and drop volume techniques. In certain intervals, the adsorption kinetics of these mixed layers was strongly influenced by the concentrations of both protein and DPPC. However, at low protein concentration, C_{β-lactoglobulin}=0.1 mg l⁻¹, the adsorption rate of mixed interfacial layers was mainly controlled by the variation of the DPPC concentration. As C_{β-lactoglobulin} was increased to 0.8 mg l⁻¹, the interfacial activity was abruptly increased, and within the concentration range of C_DPPC=10⁻⁴–10⁻⁵ mol l⁻¹, the DPPC has very little effect on the whole adsorption process. In this case, the adsorption rate of mixed layers was mainly dominated by the protein adsorption. This phenomenon also happened as the protein concentration was further increased to 3.6 mg l⁻¹. When C_DPPC>3 · 10^–5 mol l⁻¹, the adsorption behaviour was very similar to that of the pure DPPC although the protein concentration was changed. The equilibrium interfacial tensions of the mixed layers are dramatically effected by the lipid as compared to the pure protein adsorption at the same concentration. It reveals the estimation of which composition of lipid and protein decreases the interfacial tension. The combination of Brewster angle microscopy (BAM) with a conventional LB trough was applied to investigate the morphology of the mixed DPPC/β-lactoglobulin layers at the air/water interface. The mixed insoluble monolayers were produced by spreading the lipid at the water surface and the protein adsorbed from the aqueous buffer subphase. The BAM images allow to visualise the protein penetration and distribution into the DPPC monolayer on compression of the complex film. It is shown that a homogeneous distribution of β-lactoglobulin in lipid layers preferentially happens in the liquid fluid state of the monolayer while the protein can be squeezed out at higher surface pressures.     

Structure, crystal chemistry and thermal evolution of the δ-Bi2O3-related phase Bi9ReO17

The thermal evolution and structural properties of fluorite-related δ-Bi₂O₃-type Bi₉ReO₁₇ were studied with variable temperature neutron powder diffraction, synchrotron X-ray powder diffraction and electron diffraction. The thermodynamically stable room-temperature crystal structure is monoclinic P2₁/c, a=9.89917(5), b=19.70356(10), c=11.61597(6) Å, β=125.302(2)° (R_p=3.51%, wR_p=3.60%) and features clusters of ReO₄ tetrahedra embedded in a distorted Bi–O fluorite-like network. This phase is stable up to 725 °C whereupon it transforms to a disordered δ-Bi₂O₃-like phase, which was modeled with δ-Bi₂O₃ in cubic Fm3¯m with a=5.7809(1) Å (R_p=2.49%, wR_p=2.44%) at 750 °C. Quenching from above 725 °C leads to a different phase, the structure of which has not been solved but appears on the basis of spectroscopic evidence to contain both ReO₄ tetrahedra and ReO₆ octahedra.     

Neutron diffraction study of the β′ and γ phases of LiFeO2

The β, β′, γ and α phases of LiFeO₂, synthesized as powders, were annealed at different temperatures and characterized by X-ray measurements. The β′ and γ modifications were also studied by time-of-flight neutron diffraction (ISIS Facility, UK). The structure of the β′ phase was refined in the monoclinic C2/c space group (a=8.566(1), b=11.574(2), c=5.1970(5) Å, β=146.064(5)°) to wR_p=0.071–0.080 (data from four counter banks). Fe and Li atoms are ordered over two of the four independent sites, and partially disordered over the other two. The ordered Li has a distorted tetrahedral coordination. The γ structure was refined at RT (a=4.047(1), c=8.746(2) Å) and at 570 °C (a=4.082(3), c=8.822(6) Å) in the I4₁/amd symmetry, showing full order with Li in octahedral coordination at RT, and in a split-atom configuration at high temperature. On annealing, the β′ polymorph was found to transform to γ at 550 °C, thus suggesting that it is a metastable phase. Electrostatics is discussed as the driving force for the α→β′→γ ordering process of LiFeO₂.     

Preparation of new dinuclear half-titanocene complexes with ortho- and meta-xylene linkages and investigation of styrene polymerization

Half-titanocene is well-known as an excellent catalyst for the preparation of SPS (syndiotactic polystyrene) when activated with methylaluminoxane (MAO). Dinuclear half-sandwich complexes of titanium bearing a xylene bridge, (TiCl₂L)₂{(μ-η⁵, η⁵-C₅H₄-ortho-(CH₂–C₆H₄–CH₂)C₅H₄}, (4 (L = Cl), 7 (L = O-2,6-iPr₂C₆H₃)) and (TiCl₂L)₂{(μ-η⁵, η⁵-C₅H₄-meta-(CH₂–C₆H₄–CH₂)C₅H₄} (5 (L = Cl), 8(L = O-2,6-iPr₂C₆H₃)), have been successfully synthesized and introduced for styrene polymerization. The catalysts were characterized by ¹H- and ¹³C NMR, and elemental analysis. These catalysts were found to be effective in forming SPS in combination with MAO. The activities of the catalysts with rigid ortho- and meta-xylene bridges were higher than those of catalysts with flexible pentamethylene bridges. The catalytic activity of four dinuclear half-titanocenes increased in the order of 4 < 5 < 7 < 8. This result displays that the meta-xylene bridged catalyst is more active than the ortho-xylene bridged and that the aryloxo group at the titanium center is more effective at promoting catalyst activity compared to the chloride group at the titanium center. Temperature and ratio of [Al]:[Ti] had significant effects on catalytic activity. Polymerizations were conducted at three different temperatures (25, 40, and 70 °C) with variation in the [Al]:[Ti] ratio from 2000 to 4000. It was observed that activity of the catalysts increased with increasing temperature, as well as higher [Al]:[Ti]. Different xylene linkage patterns (ortho and meta) were recognized to be a principal factor leading to the characteristics of the dinuclear catalyst due to its different spatial arrangement, causing dissimilar intramolecular interactions between the two active sites.     

Synthesis, structure and DNA binding studies of mononuclear copper(II) complexes with mixed donor macroacyclic ligands, 2,6-bis({N-[2&3-(phenylselenato)alkyl]}benzimidoyl)-4-methylphenol

Two new phenol based macroacyclic Schiff base ligands, 2,6-bis({N-[2-(phenylselenato)ethyl]}benzimidoyl)-4-methylphenol (bpebmpH, 1) and 2,6-bis({N-[3-(phenylselenato)propyl]}benzimidoyl)-4-methylphenol (bppbmpH, 2) of the Se₂N₂O type have been prepared by the condensation of 4-methyl-2,6-dibenzoylphenol (mdbpH) with the appropriate (for specific reactions) phenylselenato(alkyl)amine. These ligands with Cu(II) acetate monohydrate in a 2:1 molar ratio in methanol form complexes of the composition [(C₆H₂(O)(CH₃){(C₆H₅)CN(CH₂)_nSe(C₆H₅)}{(C₆H₅)CO}₂Cu] (3 (n = 2), 4 (n = 3)) with the loss of phenylselenato(alkyl)amine and acetic acid. In both these complexes, one arm of the ligand molecule undergoes hydrolysis, and links with Cu(II) in a bidentate (NO) fashion, as confirmed by single crystal X-ray crystallography of complex 3. The selenium atoms do not form part of the copper(II) distorted square planar coordination sphere which has a trans-CuN₂O₂ core. The average Cu–N and Cu–O distances are, respectively, 1.973(3) and 1.898(2) Å. The N–Cu–N and O–Cu–O angles are, respectively, 167.4(11)° and 164.5(12)°. The compounds 1–4 have been characterized by elemental analysis, conductivity measurements, mass spectrometry, IR, electronic, ¹H and ⁷⁷Se{¹H} NMR spectroscopy and cyclic voltammetry. The interaction of complex 3 with calf thymus DNA has been investigated by a spectrophotometric method and cyclic voltammetry.     

New dimeric, trimeric and supramolecular organotin(IV) dithiocarboxylates: Synthesis, structural characterization and biocidal activities

Some new tri-, chlorodi- and diorganotin(IV) dithiocarboxylates (1–10) of 4-benzylpiperidine-1-carbodithioate ligand (L), with general formulae R₃SnL {R = n-C₄H₉ (1), C₆H₁₁ (2), CH₃ (3) and C₆H₅ (4)}, R₂SnClL {R = n-C₄H₉ (5), C₂H₅ (7), CH₃ (9)} and R₂SnL₂ {R = n-C₄H₉ (6), C₂H₅ (8), CH₃ (10)}, have been synthesized by the reaction of organotin(IV) chlorides with the ligand-salt in the appropriate molar ratio. Elemental analysis, Raman, IR, multinuclear NMR (¹H, ¹³C and ¹¹⁹Sn) and X-ray crystallographic studies have been undertaken to elucidate the structures of the complexes, both in solution and in solid state. Single-crystal X-ray diffraction study indicate trimeric, dimeric, supramolecular cyclic and supramolecular zig–zag chain structures for complexes 2, 4, 6 and 9, respectively. Square-pyramidal geometry is attributed to complex 9 on the basis of the τ value (0.4). A subsequent antimicrobial study indicates that the compounds are biologically active.     

Modeling of Equilibrium Adsorption and Surface Tension of Cationic Gemini Surfactants

A series of equilibrium tension models are used to evaluate the adsorption behavior of a novel class of lipoaminoacid gemini cationic surfactants, N^α,N^ω-bis(long-chain N^α-acylarginine)α,ω-dialkylamides or bis(Args). For purposes of comparison, the monomer LAM (the methyl ester of N^α-lauroyl arginine) was also examined. These surfactants are of particular interest for both their low toxicity and biocompatibility. The tension models are based on the Gibbs adsorption isotherm and classified as “ionic” when the surface charge and the electric double layer are accounted for or as “pseudo-nonionic” when the surface charge is ignored. Both model predictions and fitted parameter values are evaluated with respect to physical plausibility and overall goodness of fit to the available tension and density data. In particular, the inferred values for the standard Gibbs free energy of adsorption ΔG°, determined from an equilibrium constant defined on a nondimensional basis, without including artifacts due to an electrostatic contribution, are analyzed. The most reliable values of ΔG° are found with the combined model to range from −110 to −120 kJ mol⁻¹ for the three dimers examined and −80 kJ mol⁻¹ for the monomer. For spacer chain lengths n=3, 6, or 9, the maximum surface area of surfactant adsorption and the maximum free energy of adsorption are observed for the surfactant with the spacer chain length of 6.     

Crystal chemistry and physical properties of the ternary compounds R10B9C12 (R = La, Ce, Pr, Nd)

The ternary rare earth boride carbides R₁₀B₉C₁₂ (R = La, Ce, Pr, Nd) were synthesized by reacting the elements at temperatures between 1470 and 1760 K. The crystal structures (Ce₁₀B₉C₁₂ type) were determined from single crystal X-ray diffraction data. For Pr₁₀B₉C₁₂ we found: space group P4₁2₁2, Z = 4, a = 8.4365(3) Å, c = 25.468(1) Å (R1 = 0.023 (wR2 = 0.044) from 2315 reflections with I_o > 2σ(I_o)); for Nd₁₀B₉C₁₂, a = 8.3834(3) Å, c = 25.352(1) Å (R1 = 0.021 (wR2 = 0.044) from 1847 reflections with I_o > 2σ(I_o)). The three-dimensional network of rare earth atoms resulting from a stacking of slightly corrugated square nets has its voids filled with B₄C₄ and B₅C₈ finite chains. The lattice parameters of the isostructural compounds, formed with La and Ce, were refined from powder X-ray diffraction data. Magnetic properties are reported for all compounds. La₁₀B₉C₁₂ is a temperature independent paramagnet down to 6 K. The remaining compounds show a tendency of ferromagnetic ordering at T < 10 K at elevated external fields (induced ferromagnets). The electrical resistivity for Ce₁₀B₉C₁₂ reveals a weak metal-like temperature dependence below room temperature. From heat capacity measurements it can be concluded that the magnetic order is rather a short range type ordering and field induced in the case of Ce₁₀B₉C₁₂ and Pr₁₀B₉C₁₂.     

A novel 18-metallacrown-6 complex: Synthesis, structural characterization and magnetic properties

The novel 18-metallacrown-6 complex, with the formula of [Mn₆(C₁₁H₁₁N₂O₃)₆(CH₃CH₂OH)₆]·3C₃H₇NO·2CH₃CH₂OH (1) (pmshz = N-propanoyl-3-methyl-salicylhydrazide), has been prepared and characterized. The self-assembled, manganese complex assumes a nearly planar cyclic structure with an [Mn–N–N]₆ backbone. Due to the coordination, the ligand enforces the stereochemistry of the Mn³⁺ ions as a propeller shape with alternating …ΔΛΔΛ… configurations. The magnetic properties of the metallacrown molecule are characterized by a weak antiferromagnetic exchange interaction between the Mn³⁺ ion spins with S = 2 in the cyclic system.     

Mechanism and kinetics of crystallization of α-Fe in amorphous Fe81B13Si4C2 alloy

The non-isothermal crystallization of α-Fe from Fe₈₁B₁₃Si₄C₂ amorphous alloy was investigated. The kinetic parameters of crystallization process were determined by Kissinger and Kissinger–Akahira–Sunose (KAS) methods. It was established that the kinetic parameters of transformation do not change with the degree of crystallization in the range of 0.1–0.7. The kinetic model of the crystallization process was determined using the Malek's procedure. It was established that the primary crystallization α-Fe phase from amorphous alloy can be described by Šesták–Berggren autocatalytic model with kinetic triplet E_a = 349.4.0 kJ mol⁻¹, ln A = 50.76 and f(α) = α^0.72(1 − α)^1.02.     

New series of platinum group metal complexes bearing η- and η-cyclichydrocarbons and Schiff base derived from 2-acetylthiazole: Syntheses and structural studies

The mononuclear complexes [(η⁶-arene)Ru(ata)Cl]PF₆ {ata = 2-acetylthiazole azine; arene = C₆H₆ [(1)PF₆]; p-ⁱPrC₆H₄Me [(2)PF₆]; C₆Me₆ [(3)PF₆]}, [(η⁵-C₅Me₅)M(ata)]PF₆ {M = Rh [(4)PF₆]; Ir [(5)PF₆]} and [(η⁵-Cp)Ru(PPh₃)₂Cl] {η⁵-Cp = η⁵-C₅H₅ [(6)PF₆]; η⁵-C₅Me₅ (Cp^*) [(7)PF₆]; η⁵-C₉H₇ (indenyl); [(8)PF₆]} have been synthesised from the reaction of 2-acetylthiazole azine (ata) and the corresponding dimers [(η⁶-arene)Ru(μ-Cl)Cl]₂, [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂, and [(η⁵-Cp)Ru(PPh₃)₂Cl], respectively. In addition to these complexes a hydrolysed product (9)PF₆, was isolated from complex (4)PF₆ in the process of crystallization. All these complexes are isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV–Vis spectroscopy. The molecular structures of [2]PF₆ and [9]PF₆ have been established by single-crystal X-ray structure analyses.     

Thermophysical properties of 1-hexyl-3-methyl imidazolium based ionic liquids with tetrafluoroborate, hexafluorophosphate and bis(trifluoromethylsulfonyl)imide anions

The thermophysical properties of 1-hexyl-3-methyl imidazolium based hydrophobic room temperature ionic liquids (RTILs); with tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), and bis(trifluoromethylsulfonyl)imide (Tf₂N) anions, namely density ρ (298.15 to 348.15) K, dynamic viscosity η (288.2 to 348.2) K, surface tension σ (298.15 to 338) K, and refractive index n_D (302.95 to 332.95) K have been measured. The coefficients of thermal expansion α_p values were calculated from the experimental density data using an empirical correlation. The thermal stability of all ILs is also investigated at two different heating rates (10 and 20) °C · min⁻¹) using thermogravimetric analyzer (TGA). The experimental results presented in this study reveal that the choice of anion type shows the most significant effect on the properties of ILs. The chloride and water contents of ILs (as impurities) are also investigated and reported in the present work.     

Phase diagram of the La–Si binary system under high pressure and the structures of superconducting LaSi5 and LaSi10

The La–Si binary phase diagram under a high pressure of 13.5 GPa was experimentally constructed. New superconducting silicides LaSi₅ and LaSi₁₀ were found, which have peritectic decomposition temperatures at 1000 and 750 °C, respectively. The single crystal X-ray structural analysis revealed that there are two polymorphs in LaSi₅. The α-form obtained by heating a molar mixture of LaSi₂ and 3 Si at about 700 °C or by a rapid cooling from 1000 °C under pressure crystallizes with the space group C2/m and the lattice parameters a=15.11(3), b=4.032(6), c=8.26(1) Å, and β=109.11(1)°. The β-form obtained by a slow cooling from 800–950 °C to 600 °C under pressure has the same space group but with slightly different lattice parameters, a=14.922(7), b=3.906(2), c=8.807(4) Å, and β=107.19(1)°. The β-form is formed during the incomplete transformation of the α-form on cooling, and has always been obtained as a mixture with the α-form. The compound can be characterized as a Zintl phase with a polyanionic framework with large tunnels running along the b axis hosting lanthanum ions. In the β-form, three of the five Si sites are disordered. The two polymorphs contain one dimensional sila-polyacene ribbons, Si ladder polymer, running along the b axis. The α-form showed superconductivity with the transition temperature T_c of 11.5 K. LaSi₁₀ crystallizes with the space group 6₃/mmc and the lattice parameters a=9.623(4), c=4.723(3) Å. It is composed of La containing Si₁₈ polyhedra (La@Si₁₈) of hexagonal beer-barrel shape, which form straight columns by stacking along the c-axis via face sharing. One-dimensional columns of La@Si₁₈ barrels are edge-shared, and bundled with infinite Si trigonal bipyramid chains via corner sharing. The Si atoms in the straight chains have a five-fold coordination. LaSi₁₀ became a superconductor with T_c=6.7 K. The ab initio calculation of the electric band structures showed that α-LaSi₅ and LaSi₁₀ are metallic, and the conduction electrons mainly come from Si-3p orbitals.     

Syntheses,characterization, antibacterial activity and molecular modelling of phenylantimony(III) heteroleptic derivatives containing substituted oximes and piperidine dithiocarbamate

Six new heteroleptic phenylantimony(III) derivatives containing substituted oximes and dithiocarbamate moieties of the type (where R = ─C₆H₅, X = ─CH₃ ( 2a ); R = ─C₆H₄CH₃, X = ─CH₃ ( 2b ); R = ─C₆H₄Cl, X = ─CH₃ ( 2c ); R = ─C₆H₄Br, X = ─CH₃ ( 2d ); R = ─C₆H₄OH, X = ─H ( 2e ); R(X)C = ( 2f )) have been synthesized by the reactions of phenylantimony(III) dichloride with the sodium salt of substituted oximes and dithiocarbamate moiety in unimolar ratio with stirring in dichloromethane. All these newly synthesized derivatives have been characterized using physicochemical and elemental analyses. Structures have been proposed on the basis of infrared, ¹H NMR, ¹³C NMR and LC–MS spectral studies and molecular modelling. In these derivatives the oxime behaves in an unidentate manner whereas dithiocarbamate behaves in a monofunctional anisobidentate manner. Pseudo‐trigonal bipyramidal (ψ‐TBP) geometry around the antimony metal centre is proposed for these phenylantimony(III) heteroleptic derivatives. The geometry of a representative complex has been optimized through molecular modelling. These newly synthesized derivatives were screened against Bacillus subtilis (Gram‐positive) and Escherichia coli (Gram‐negative) bacteria to evaluate their antibacterial potential. The structure–activity relationship for antibacterial activity among the four derivatives 2a , 2c , 2e and 2f is discussed.     

Adsorption and inhibitive properties of aminobiphenyl and its Schiff base on mild steel corrosion in 0.5 M HCl medium

Electrochemical measurements were performed to investigate the effectiveness and adsorption behaviour of aminobiphenyl (Aph) and 2-(3-hydroxybenzylideneamino)biphenyl (Aph-S), as corrosion inhibitors for mild steel (MS) in 0.5 M HCl solution. Potentiodynamic polarization, linear polarization resistance (LP) and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behaviour in the absence and presence of different concentrations of Aph and Aph-S. In order to gain more information about adsorption mechanism the AC impedance technique was used to evaluate the potential of zero charge (PZC) from polarization resistance (R_p) versus voltage (E) plot. Potentiodynamic polarization measurements showed that Aph act as cathodic type inhibitor where as Aph-S act mixed type. The inhibition efficiency (IE%) increases with increasing concentration of compounds and reached 92.6% for Aph and 97.2% for Aph-S at 5 × 10⁻³ M. Double layer capacitance (C_dl) and polarization resistance (R_p) values are derived from Nyquist plots obtained from AC impedance studies. The experimental data fit Langmuir isotherm for both Aph and Aph-S, and from the adsorption isotherm some thermodynamic data for the adsorption processes are calculated and discussed. The effect of exposure time on the corrosion behaviour of mild steel in the absence and presence of inhibitor over 168 h was also studied.     

Formal chromium–chromium triple bonds and bent rings in the binuclear cycloheptatrienylchromium carbonyls (C7H7)2Cr2(CO)n (n = 6, 5, 4, 3, 2, 1, 0): A density functional theory study

Binuclear cycloheptatrienylchromium carbonyls of the type (C₇H₇)₂Cr₂(CO)_n (n = 6, 5, 4, 3, 2, 1, 0) have been investigated by density functional theory. Energetically competitive structures with fully bonded heptahapto η⁷-C₇H₇ rings are not found for (C₇H₇)₂Cr₂(CO)_n structures having two or more carbonyl groups. This result stands in contrast to the related (C_nH_n)₂M₂(CO)_n (M = Mn, n = 6; M = Fe, n = 5; M = Co, n = 4) systems. Most of the predicted (C₇H₇)₂Cr₂(CO)_n structures have bent trihapto or pentahapto C₇H₇ rings and CrCr distances in the range 2.4–2.5 Å suggesting formal triple bonds. In some cases rearrangement of the heptagonal C₇H₇ ring to a tridentate cyclopropyldivinyl or tridentate bis(carbene)alkyl ligand is observed. In addition structures with CO insertion into the C₇H₇–Cr bond are predicted for (C₇H₇)₂Cr₂(CO)_n (n = 6, 4, 2). The global minima found for the (C₇H₇)₂Cr₂(CO)_n derivatives for n = 6, 5, and 4 are (η⁵-C₇H₇)(OC)₂CrCr(CO)₄(η¹-C₇H₇), (η³-C₇H₇)(OC)₂CrCr(CO)₃(η^2,1- C₇H₇), and (η⁵-C₇H₇)₂Cr₂(CO)₄, respectively. The global minima for (C₇H₇)₂Cr₂(CO)_n (n = 3, 2) have rearranged C₇H₇ groups. Singlet and triplet structures with heptahapto η⁷-C₇H₇ rings are found for the dimetallocenes (η⁷-C₇H₇)₂Cr₂(CO) and (η⁷-C₇H₇)₂Cr₂, with the singlet structures being of much lower energies in both cases.     

A manganese sulfite with extended metal–oxygen–metal bonds exhibiting hydrogen uptake

A manganese sulfite of the formula Mn₅(OH)₄(SO₃)₃·2H₂O, I{a=7.5759(7) Å, b=8.4749(8) Å, c=10.852(1) Å, β=100.732(2)°, Z=2, space group=P2₁/m (no. 11), R₁=0.0399 and wR₂=0.1121 [for R indexes I>2σ(I)]}, comprising Mn₃O₁₄ units and extended Mn–O–Mn bonds along the three dimensions has been synthesized under hydrothermal conditions. It has narrow channels along the b-axis and exhibits hydrogen storage of 2.1 wt% at 300 K and 134 bar.     

Molybdenum(VI) network polymers based on anion–π interaction and hydrogen bonding: Synthesis, crystal structures and oxidation catalytic application

A crystallographic investigation of anion–π interactions and hydrogen bonds on the preferred structural motifs of molybdenum(VI) complexes has been carried out. Two molybdenum(VI) network polymers MoO₂F₄·(Hinca)₂ (1) and MoO₂F₃(H₂O)·(Hinpa) (2), where inca = isonicotinamide and inpa = isonipecotamide, have been synthesized, crystallographically characterized and successfully applied to alcohol oxidation reaction. Complex 1 crystallizes in the monoclinic space C2/c: a = 16.832(3) Å, b = 8.8189(15) Å, c = 12.568(2) Å, β = 118.929(3)°, V = 1560.1(5) Å³, Z = 4. Complex 2 crystallizes in the triclinic space P-1: a = 5.459(2) Å, b = 9.189(4) Å, c = 12.204(5) Å, α = 71.341(6)°, β = 81.712(7)°, γ = 77.705(7)°, V = 564.8(4) Å³, Z = 2. Complex 1 consists of hydrogen bonding and anion–π interactions, both of which are considered as important factors for controlling the geometric features and packing characteristics of the crystal structure. The geometry of the sandwich complex of [MoO₂F₄]²⁻ with two pyridine rings indicates that the anion–π interaction is an additive and provides a base for the design and synthesis of new complexes. For complex 2, the anions and the protonated inpa ligands form a 2D supramolecular network by four different types of hydrogen contacts (N–HF, N–HO, O–HF and O–HO). The catalytic ability of complexes 1 and 2 has also been evaluated by applying them to the oxidation of benzyl alcohol with TBHP as oxidant.