Alkoxyamines of Stable Aromatic Nitroxides: N?O vs. C?O Bond Homolysis

A series of stable 2,2‐disubstituted 3‐(phenylimino)indol‐1‐oxyls, the alkoxyamines 3 , were prepared, characterized, and tested as possible candidates in controlled radical polymerization (CRP). The sturctures of 3d and 10 were additionally solved by X‐ray diffraction. The lability of the N? O(C) and (N)O? C bonds of compounds 3 were compared, and the possibility of N? O vs. O? C bond cleavage was evaluated by thermal degradation, ESR spin trapping, MS experiments, and DFT calculations. Alkoxyamines with a primary‐ or secondary‐alkyl group bound to the O‐atom of the nitroxide function (hexyl and i‐Pr) mainly underwent (undesired) N? O bond homolysis. When the O‐alkyl radical was a tertiary or a benzyl group (crotonyl or styryl), O? C bond cleavage occurred as the main process, thus suggesting a possible use of these compounds in CRP processes.     

2,5‐Dihydro‐1H‐imidazole‐Based Nitroxides as Prospective Mediators in Living Radical Polymerization

A number of spectroscopic methods were applied to obtain kinetic parameters of reactions modelling the 2,5‐dihydro‐1H‐imidazole 1‐oxide mediated living polymerization of acrylates. The homolysis rate constants of alkoxyamines based on five nitroxides were measured by EPR spectroscopy at different temperatures. The recombination rate constants k_c between the corresponding alkyl radicals and the nitroxides were measured by means of laser flash photolysis. The time‐resolved chemically induced dynamic nuclear polarization (TR‐CIDNP) experiments revealed the negligible contribution of disproportionation in the recombination reaction. In addition, the thermodecomposition of alkoxyamines in the NMR probe showed the absence of intramolecular elimination of hydroxylamines from the corresponding alkoxyamines. Analysis of the kinetic parameters showed that the 2,5‐dihydro‐1H‐imidazole 1‐oxide type radicals are promising mediators for the living polymerization of acrylates and methacrylates.     

Nitroxide‐Mediated Polymerization of Styrene in a Continuous Tubular Reactor

Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.

Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor.     

Nitroxide‐mediated radical copolymerization of methyl methacrylate controlled with a minimal amount of 9‐(4‐vinylbenzyl)‐9H‐carbazole

The controlled nitroxide‐mediated homopolymerization of 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) and the copolymerization of methyl methacrylate (MMA) with varying amounts of VBK were accomplished by using 10 mol % {tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino} nitroxide relative to 2‐({tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino}oxy)‐2‐methylpropionic acid (BlocBuilder?) in dimethylformamide at temperatures from 80 to 125 °C. As little as 1 mol % of VBK in the feed was required to obtain a controlled copolymerization of an MMA/VBK mixture, resulting in a linear increase in molecular weight versus conversion with a narrow molecular weight distribution (M_w /M_n ≈ 1.3). Preferential incorporation of VBK into the copolymer was indicated by the MMA/VBK reactivity ratios determined: r_VBK = 2.7 ± 1.5 and r_MMA = 0.24 ± 0.14. The copolymers were found significantly “living” by performing subsequent chain extensions with a fresh batch of VBK and by ³¹P NMR spectroscopy analysis. VBK was found to be an effective controlling comonomer for NMP of MMA, and such low levels of VBK comonomer ensured transparency in the final copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Expanding the supramolecular polymer LEGO system: Nitroxide‐mediated living free‐radical polymerization as a tool for mono‐ and telechelic polystyrenes

Nitroxide‐mediated, controlled living radical polymerization was employed to introduce terpyridine ligands at one or two chain ends of polystyrene. For this purpose, a unimolecular initiator bearing both a terpyridine ligand as well as a mediating nitroxide was synthesized and used for the controlled polymerization of styrene. Moreover, a maleimide‐functionalized terpyridine was prepared in order to synthesize telechelic polymers, utilizing nitroxide substitution reactions. Kinetic studies of the polymerization of styrene were carried out. In all polymerizations, special attention was focused on the retention of end‐group functionality, in light of the effects of autoinitiation and autopolymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4016–4027, 2004     

Well‐defined polyoxazoline‐based alkoxyamines as efficient macroinitiators in nitroxide‐mediated radical polymerization of styrene

The synthesis of two well‐defined 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide‐terminated poly(2‐methyl‐2‐oxazoline) with narrow dispersity (M_w/M_n = 1.1) has been achieved for the first time. The insertion of the alkoxyamine end groups at one or both ends of poly(2‐methyl‐2‐oxazoline) (PMEOX) chains has been successfully done using a method based on “terminating reagent method.” These macroinitiators have molecular weights ranging from 6.3 × 10³ to 9.4 × 10³ g mol^?1. In contrast, attempt to introduce the alkoxyamine group at one end of PMEOX chain through the “initiator method” has furnished a mixture of alkoxyamine‐graft polyoxazolines because of rearrangement of alkoxyamine occurring during the synthesis of PMEOX. The macroinitiators obtained by terminating reagent method have been used successfully for polymerization of styrene by nitroxide‐mediated radical polymerization (NMP), which exhibited all the expected features of a controlled system. The control of NMP has been proved by a good agreement between theoretical and experimental molecular weights and by narrow dispersity (M_w/M_n < 1.2). Different types of well‐defined multiblock copolymers have been prepared: diblock copolymers poly[(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PMEOX‐b‐PS) and, for the first time, triblock copolymers poly[(styrene)‐b‐(2‐methyl‐2‐oxazoline)‐b‐(styrene)] (PS‐b‐PMEOX‐b‐PS). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis of a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines,SG1‐CH(Me)CO2R,and measurement of the homolysis rate constants of the C?ON bond

During nitroxide‐mediated polymerization, the polymerization time decreases with an increasing rate constant of the cleavage of the NO? C bond of dormant alkoxyamines. Thus, knowledge of the factors influencing this cleavage is of considerable interest. We have prepared a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines [SG1‐CH(Me)CO₂R] with various R groups (alkyl or aryl) and measured the homolysis rate constants (k_d). k_d decreases with the bulkiness and increases with the polarity of the R group. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3504–3515, 2004     

Controlled Synthesis and Degradation of Poly(N‐(isobutoxymethyl) acrylamide) Homopolymers and Block Copolymers

The homopolymerization of the water‐insoluble N‐(isobutoxymethyl)acrylamide (IBMA) is investigated for the first time by nitroxide‐mediated polymerization. The homopolymerization is characterized by a linear increase in number average molecular weight (M_n) versus conversion (X) to X > 0.80 while maintaining dispersities of M_w/M_n < 1.30. A strong Arrhenius relationship correlates the apparent rate constants and the homopolymerization temperatures between 105 and 120 °C. All poly(IBMA) homopolymers are then successfully chain‐extended with styrene (S) to form well‐defined block copolymers of poly(IBMA)‐b‐poly(S) suggesting a high degree of livingness of the poly(IBMA) macroinitiators. Thermogravimetric analysis and differential scanning calorimetry are both used to characterize the thermal properties of the homopolymers and block copolymers and identify possible unique degradation of the poly(IBMA) block through imide formation at elevated temperatures.

     

Amphiphilic Poly(4‐acryloylmorpholine)/Poly[2‐(N‐carbazolyl)ethyl acrylate] Random and Block Copolymers Synthesized by NMP

A series of random copolymers and block copolymers containing water‐soluble 4AM and fluorescent VAK are synthesized by NMP. The homopolymerizations of 4AM and VAK and 4AM/VAK random copolymerization are performed in 50 wt% DMF using 10 mol% SG1, resulting in a linear increase in versus conversion, and final polymers with narrow molecular weight distributions ( < 1.4). Reactivity ratios r_VAK = 0.64 ± 0.52 and r_4AM = 0.86 ± 0.66 are obtained for the 4AM/VAK random copolymerization. In addition, a poly(4AM) macroinitiator is used to initiate a surfactant‐free suspension polymerization of VAK. After 2.5 h, the resulting amphiphilic block copolymer has = 12.6 kg · mol^?1, = 1.48, molar composition F_VAK = 0.38 with latex particle sizes between 270 and 475 nm.

     

Nitroxide‐mediated radical polymerization of 2‐(dimethylamino)ethyl acrylate and its sequential block copolymerization with styrene and N‐butyl acrylate

Nitroxide‐mediated radical polymerization (NMRP) of 2‐(dimethylamino)ethyl acrylate (DMAEA) was carried out at 100–120 °C, initiated by MONAMS, an alkoxyamine based on N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethylpropyl)nitroxide, SG1. Controlled polymerization can be achieved by the addition of free SG1 (the initial molar ratio of SG1 to MONAMS ranged from 0.06 to 0.12), giving a linear first‐order kinetic plot up to 55–70% conversion depending on the reaction conditions. The molecular weights show a near linear increase with conversion; however, they deviate to some extent with theoretical values. SG1‐mediated polymerization of DMAEA at 112 °C is also controlled in organic solvents (N,N‐dimethylformide, anisole, xylene). Polymerization rate increases with increasing solvent polarity. Chain transfer to polymer produces ～1 mol % branches in bulk and 1.2–1.9 mol % in organic solvents, typical of those for acrylates. From poly(styrene) (pS) and poly(n‐butyl acrylate) (pBA) macroinitiators, amphiphilic di‐ and triblock copolymers p(S‐b‐DMAEA), p(DMAEA‐b‐S‐b‐DMAEA), p(BA‐b‐DMAEA), and p(DMAEA‐b‐BA‐b‐DMAEA) were synthesized via NMRP at 110 °C. Polymers were characterized by GPC, NMR, surface tension measurements, and DSC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 414–426, 2006     

Controlled polymerization of N‐isopropylacrylamide with an activated methacrylic ester

A copolymer of N‐isopropylacrylamide with the N‐hydroxysuccinimide ester of methacrylic acid has found use in a variety of applications. Here we report our efforts to gain control over the molecular weight distribution of this copolymer with controlled radical polymerization methods, such as atom transfer radical polymerization, reversible addition–fragmentation transfer (RAFT), and nitroxide‐mediated polymerization. We have found that RAFT is capable of affording these copolymers with a polydispersity index of 1.1–1.2. Our results for all three polymerizations are reported. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6340–6345, 2004     

A Facile Synthesis of 1‐Substituted 3‐Alkoxy‐1H‐isoindoles Based on the Reaction of 2‐(Dialkoxymethyl)phenyllithiums with Nitriles,Followed by Acid‐Catalyzed Cyclization

A two‐step synthesis of 1‐substituted 3‐alkoxy‐1H‐isoindoles 4 has been developed. Thus, the reaction of 2‐(dialkoxymethyl)phenyllithium compounds, which are easily generated in situ by Br/Li exchange between 1‐bromo‐2‐(dialkoxymethyl)benzenes 1 and BuLi in THF at ?78°, with nitriles afforded [2‐(dialkoxymethyl)phenyl]methanimines 2 , which were treated with a catalytic amount of TsOH?H₂O in refluxing CHCl₃ to give the desired products in reasonable yields. Similarly, 3‐aryl‐1‐ethoxy‐1‐methyl‐1H‐isoindoles 7 have been prepared starting from 1‐bromo‐2‐(1,1‐diethoxyethyl)benzenes 5 .     

Copolymerization of 2,3,4,5,6‐Pentafluorostyrene and Methacrylic Acid by Nitroxide‐Mediated Polymerization: The Importance of Reactivity Ratios

Amphiphilic block copolymers of 2,3,4,5,6‐pentafluorostyrene (PFS) and methacrylic acid (MAA) are synthesized via nitroxide‐mediated polymerization (NMP). It is established that to obtain a controlled copolymerization a minimum of 40 mol% of PFS is required, which is significantly greater than other copolymerization systems such as using 4.5–8 mol% styrene or 1 mol% of 9‐(4‐vinylbenzyl)‐9H‐carbazole to control the copolymerization of methacrylates. It is surmised that this lack of control is due to the reactivity ratios that favor the addition of MAA rather than PFS (r_PFS = 0.14, r_MAA = 6.97). However this reactivity ratio pair suggests that a one‐shot delayed injection approach can be utilized to synthesize almost pure block copolymers in one pot. Therefore, poly(PFS)‐b‐(PFS‐ran‐MAA) block copolymers are synthesized by a one‐shot delayed addition of MAA. While the concentration of irreversibly terminated chains is evident these results suggest a promising route to the synthesis of fluorinated amphiphilic block copolymers by NMP.

     

Nitroxide‐Mediated Polymerization of Methacrylic Esters: Insights and Solutions to a Long‐Standing Problem

Nitroxide‐mediated polymerization (NMP) is one of the most powerful reversible deactivation radical polymerization techniques and has incredibly gained in maturity and robustness over the last decades. However, control of methacrylic esters is one of the different aspects of NMP that still requires improvement. This family of monomers always represented an important challenge for NMP, despite the many different nitroxide structures that have been designed over the course of time. This Review aims to present the most successful strategies directed toward the control of the NMP technique of methacrylic esters and especially methyl methacrylate. NMP‐derived materials comprising uncontrolled methacrylate segments will also be discussed.

     

Novel 1,2,3,4‐Tetrahydroquinazolinones via Reaction of 2‐Amino‐N‐substituted Benzamides and Dimethyl Acetylenedicarboxylate

Reaction of 2‐amino‐N‐substituted benzamides and dimethyl acetylenedicarboxylate (DMAD) in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in H₂O at room temperature led to the formation of novel 1,2,3,4‐tetrahydroquinazolinones.     

Genesis of the CSIRO polymer group and the discovery and significance of nitroxide‐mediated living radical polymerization

The background to the formation of the Commonwealth Scientific and Industrial Research Organization (CSIRO) polymer group is discussed. In particular, the challenges of working with high‐conversion polymerization, as found in commercial systems, and the need to explain variations in polymer properties led to important advances in the theory of radical polymerization and control over both the initiation and termination steps. Studies on the fate of the macromonomer, formed in termination by disproportionation, led to an early form of addition/fragmentation now known as reversible addition–fragmentation chain transfer, whereas detailed studies on initiation pathways using nitroxide trapping led to nitroxide‐mediated living radical polymerization. These studies contributed to the renaissance in free‐radical polymerization studies. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5748–5764, 2005     

ROMP‐NMP‐ATRP combination for the preparation of 3‐miktoarm star terpolymer via click chemistry

A combination of ring opening metathesis polymerization (ROMP) and click chemistry approach is first time utilized in the preparation of 3‐miktoarm star terpolymer. The bromide end‐functionality of monotelechelic poly(N‐butyl oxanorbornene imide) (PNBONI‐Br) is first transformed to azide and then reacted with polystyrene‐b‐poly(methyl methacrylate) copolymer with alkyne at the junction point (PS‐b‐PMMA‐alkyne) via click chemistry strategy, producing PS‐PMMA‐PNBONI 3‐miktoarm star terpolymer. PNBONI‐Br was prepared by ROMP of N‐butyl oxanorbornene imide (NBONI) 1 in the presence of (Z)‐but‐2‐ene‐1,4‐diyl bis(2‐bromopropanoate) 2 as terminating agent. PS‐b‐PMMA‐alkyne copolymer was prepared successively via nitroxide‐mediated radical polymerization (NMP) of St and atom transfer radical polymerization (ATRP) of MMA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 497–504, 2009     

Simulation of Styrene Polymerization by Monomolecular and Bimolecular Nitroxide‐Mediated Radical Processes over a Range of Reaction Conditions

Simulations of polymerization rate, molecular weight development and evolution of the concentrations of species participating in the reaction mechanism over a range of operating conditions, and a parameter sensitivity analysis showing the effects of temperature, activation/deactivation equilibrium constant and initial concentrations of controller and initiator (if present) on these variables are presented for the nitroxide‐mediated radical polymerization of styrene. The simulations were performed with a computer program based on a detailed reaction mechanism. The simulated profiles of conversion, number average molecular weight ( ), and polydispersity agree well with experimental data. Previously unknown activation energies for reactions involved in the mechanism are estimated. The temperature dependence of the kinetic rate constants obtained in this study will be useful for future modeling and optimization studies.

     

Emulsifier‐free,organotellurium‐mediated living radical emulsion polymerization (emulsion TERP): Effect of monomer hydrophilicity

Emulsifier‐free, organotellurium‐mediated living radical emulsion polymerizations (emulsion TERPs) of methyl methacrylate (MMA) and n‐butyl methacrylate (BMA) with dimethyl ditelluride were carried out at two different stirring rates (220 rpm and 1000 rpm). In the emulsion TERP of MMA as a hydrophilic monomer, the molecular weight distribution (MWD) controls with both stirring rates were good with high polymerization rate (100% conversion at 1.5 h). On the other hand, in the emulsion TERP of BMA as a hydrophobic monomer, at 220 rpm the polymerization rate was much slow (～50% conversion at 22 h) and the MWD control was bad, but at 1000 rpm the polymerization was completed within 7 h and MWD control was good. These results suggest that monomer transportation from droplets to polymerizing particles via aqueous medium is important for good MWD control and steady polymerization in the emulsion TERP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013