An intermediate in a new synthesis approach to β‐substituted β‐hydroxy­aspartame

The crystal and molecular structure of 1‐tert‐butyl 4‐ethyl (2′R,3′R,5′R,2S,3S)‐3‐bromo­methyl‐3‐hydroxy‐2‐[(2′‐hydroxy‐2′,6′,6′‐tri­methyl­bi­cyclo­[3.1.1]­hept‐3′‐yl­idene)­amino]­succinate, C₂₁H₃₄BrNO₆, is presented. This compound is an intermediate in the new synthetic route to β‐substituted β‐hydroxy­aspartates, which are blockers of glutamate transport.     

Tandem Gold/Silver‐Catalyzed Cycloaddition/Hydroarylation of 7‐Aryl‐1,6‐enynes to Form 6,6‐Diarylbicyclo[3.2.0]heptanes

Mixtures of [{PCy₂(o‐biphenyl)}AuCl] and AgSbF₆ catalyze the tandem cycloaddition/hydroarylation of 7‐aryl‐1,6‐enynes with electron‐rich arenes to form 6,6‐diarylbicyclo[3.2.0]heptanes in good yield under mild conditions. Experimental observations point to a mechanism involving gold‐catalyzed cycloaddition followed by silver‐catalyzed hydroarylation of a bicyclo[3.2.0]hept‐1(7)‐ene intermediate.     

Synthesis and Structural Characterisation of Derivatives of Tricyclo[5.2.1.02,6]Dec‐8‐Ene‐3,5‐Dione with an Expected Antimicrobial Activity

Anhydrides, imides, N‐ethylimides, N‐hydroxyimides and N‐aminoimides of 1,4,5,6‐tetramethyl‐bicyclo[5.2.1.0^2,6]hept‐5‐ene‐2,3‐dicarboxylic acid, 1,4,5,6,7‐pentamethyl‐bicyclo[5.2.1.0^2,6]hept‐5‐ene‐2,3‐dicarboxylic acid and 7‐ethyl‐1,4,5,6‐tetramethyl‐bicyclo[5.2.1.0^2,6]hept‐5‐ene‐2,3‐dicarboxylic acid were obtained. Antimicrobial activity of the newly obtained derivatives was tested against selected Gram‐positive and Gram‐negative bacteria and fungi of the Candida species. The structures of obtained compounds and their antimicrobial activity were compared. Structure of 1b, 2b and 1e were determined by an X‐ray analysis.     

Conformational change induced by hydration: trans‐dichloro­bis­[(1R,2R,3R,5S)‐(–)‐isopinocampheylamine]palladium(II) and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐isopinocampheylamine]palladium(II) hemihydrate

The title compounds, trans‐dichloro­bis[(1R,2R,3R,5S)‐(−)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II), [PdCl₂(C₁₀H₁₉N)₂], and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II) hemihydrate, [PdCl₂(C₁₀H₁₉N)₂]·0.5H₂O, present different arrangements of the amine ligands coordinated to Pd^II, viz. antiperiplanar in the former case and (−)anticlinal in the latter. The hemihydrate is an inclusion compound, with a Pd coordination complex and disordered water mol­ecules residing on crystallographic twofold axes. The crystal structure for the hemihydrate includes a short Pd⋯Pd separation of 3.4133 (13) Å.     

(8‐Dimethylamino‐1‐naphthyl)dimethylammonium 3‐carboxy‐1,4,5,‐6,7,7‐hexachlorobicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate hydrate

The structure of the title compound, C₁₄H₁₉N₂⁺·C₉H₃Cl₆O₄^?·H₂O, consists of singly ionized 1,4,5,6,7,7‐hexachlorobicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxylic acid anions and protonated 1,8‐bis(dimethylamino)naphthalene cations. In the (8‐dimethylamino‐1‐napthyl)dimethylammonium cat­ion, a strong disordered intramolecular hydrogen bond is formed with N?N = 2.589 (3) Å. The geometry and occupancy obtained in the final restrained refinement suggest that the disordered hydrogen bond may be asymmetric. Water mol­ecules link the anion dimers into infinite chains via hydrogen bonding.     

Synthesis of Novel,Chiral Bicyclo[3.1.0]hex‐2‐ene Amino Acid Derivatives as Useful Synthons in Medicinal Chemistry

A short and concise synthesis of novel, chiral bicyclo[3.1.0]hex‐2‐ene amino acid derivatives 13 and 14 has been developed. The key step is a stereo‐ and regioselective allylic amination of exo‐ and endo‐methyl bicyclo[3.1.0]hex‐2‐ene‐6‐carboxylates 8 and 9 , which were prepared from 7,7‐dichlorobicyclo[3.2.0]hept‐2‐en‐6‐one ( 1 ). These amino acid derivatives are useful building blocks in medicinal chemistry and can be prepared as chiral compounds by using either (+)‐ 1 or (?)‐ 1 as starting material.     

Ironcarbonyl‐Mediated Alkene Hydroamidation of 7‐Oxabenzonorbornadiene

Iron carbonyl‐mediated alkene hydroamidation of 7‐oxabenzonorbornadiene was accomplished under very mild conditions as the result of nucleophilic attack of amines on iron‐coordinating CO to produce exo‐5‐(alkylaminocarbonyl)‐7‐oxabenzobicyclo[2.2.1]hept‐2‐ene derivatives.     

Regio‐ and Stereoselective Reductive Coupling of Bicyclic Alkenes with Propiolates Catalyzed by Nickel Complexes: A Novel Route to Functionalized 1,2‐Dihydroarenes and γ‐Lactones

7‐Oxabenzonorbornadienes derivatives 1 a – d underwent reductive coupling with alkyl propiolates CH₃C?CCO₂CH₃ ( 2 a ), PhC?CCO₂Et ( 2 b ), CH₃(CH₂)₃C?CCO₂CH₃ ( 2 c ), CH₃(CH₂)₄C?CCO₂CH₃ ( 2 d ), TMSC?CCO₂Et ( 2 e ), (CH₃)₃C?CCO₂CH₃ ( 2 f ) and HC?CCO₂Et ( 2 g ) in the presence of [NiBr₂(dppe)] (dppe=Ph₂PCH₂CH₂PPh₂), H₂O and zinc powder in acetonitrile at room temperature to afford the corresponding 2alkenyl‐1,2‐dihydronapthalen‐1‐ol derivatives 3 a – n with remarkable regio‐ and diastereoselectivity in good to excellent yields. Similarly, the reaction of 7azabenzonorbornadienes derivative 1 e with propiolates 2 a, b and d proceeded smoothly to afford reductive coupling products 2alkenyl‐1,2‐dihydronapthalene carbamates 3 o – p in good yields with high regio‐ and stereoselectivity. This nickel‐catalyzed reductive coupling can be further extended to the reaction of 7oxabenzonorbornene derivatives. Thus, 5,6‐di(methoxymethyl)‐7‐oxabicyclo[2.2.1]hept‐2‐ene ( 4 ) reacted with 2 a and 2 d to furnish cyclohexenol derivatives bearing four cis substituents 5 a and b in 81 and 84 % yield, respectively. In contrast to the results of 4 with 2 , the reaction of dimethyl 7oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxylate ( 6 ) with propiolates 2 a – d afforded the corresponding reductive coupling/cyclization products, bicyclo[3.2.1]γ‐lactones 7 a – d in good yields. The reaction provides a convenient one‐pot synthesis of γ‐lactones with remarkably high regio‐ and stereoselectivity.     

Ring‐Opening Metathesis Polymerization Based Pore‐Size‐Selective Functionalization of Glycidyl Methacrylate Based Monolithic Media: Access to Size‐Stable Nanoparticles for Ligand‐Free Metal Catalysis

Monolithic polymeric supports have been prepared by electron‐beam‐triggered free‐radical polymerization using a mixture of glycidyl methacrylate and trimethylolpropane triacrylate in 2‐propanol, 1‐dodecanol, and toluene. Under appropriate conditions, phase separation occurred, which resulted in the formation of a porous monolithic matrix that was characterized by large (convective) pores in the 30 μm range as well as pores of <600 nm. The epoxy groups in pores of >7 nm were hydrolyzed by using poly(styrenesulfonic acid) (M_w=69 400 g mol^?1, PDI=2.4). The remaining epoxy groups inside pores of <7 nm were subjected to aminolysis with norborn‐5‐en‐2‐ylmethylamine ( 2 ) and provided covalently bound norborn‐2‐ene (NBE) groups inside these pores. These NBE groups were then treated with the first‐generation Grubbs initiator [RuCl₂(PCy₃)₂(CHPh)]. These immobilized Ru–alkylidenes were further used for the surface modification of the small pores by a grafting approach. A series of monomers, that is, 7‐oxanorborn‐5‐ene‐2,3‐dicarboxylic anhydride ( 3 ), norborn‐5‐ene‐2,3‐dicarboxylic anhydride ( 4 ), N,N‐di‐2‐pyridyl‐7‐oxanorborn‐5‐ene‐2‐carboxylic amide ( 5 ), N,N‐di‐2‐pyridylnorborn‐5‐ene‐2‐carboxamide ( 6 ), N‐[2‐(dimethylamino)ethyl]bicyclo[2.2.1]hept‐5‐ene‐2‐carboxamide ( 7 ), and dimethyl bicyclo[2.2.1]hept‐5‐en‐2‐ylphosphonate ( 8 ), were used for this purpose. Finally, monoliths functionalized with poly‐ 5 graft polymers were used to permanently immobilize Pd²⁺ and Pt⁴⁺, respectively, inside the pores. After reduction, metal nanoparticles 2 nm in diameter were formed. The palladium‐nanoparticle‐loaded monoliths were used in both Heck‐ and Suzuki‐type coupling reactions achieving turnover numbers of up to 167 000 and 63 000, respectively.     

Photoannelation Reactions of 3‐(Alk‐1‐ynyl)cyclohept‐2‐en‐1‐ones

Irradiation (350 nm) of the newly synthesized 3‐(alk‐1‐ynyl)cyclohept‐2‐en‐1‐ones 1 and 2 leads to the selective formation of tricyclic head‐to‐head dimers. In the presence of 2,3‐dimethylbuta‐1,3‐diene, the (monocyclic) enone 1 affords trans‐fused 7‐alkynyl‐bicyclo[5.2.0]nonan‐2‐ones as major photoproducts, whereas photocycloaddition of benzocyclohept‐5‐en‐7‐one 2 to the same diene gives preferentially the eight‐membered cyclic allene 16 via ‘end‐to‐end’ cyclization of the intermediate allyl‐propargyl biradical 22 . On contact with acid, cycloocta‐1,2,5‐triene 16 isomerizes to cycloocta‐1,3,5‐triene 18 .     

Synthesis of the Chiral Pair of a Novel Thromboxane Antagonist, 3‐[2‐(3‐Benzenesulfonylamino‐7‐oxabicyclo[2.2.1]hept‐2‐yl‐methyl)phenyl] Propionic Acid

Preparation of the enantiomeric pair of 3‐[2‐(3‐benzenesulfonylamino‐7‐oxabicyclo[2.2.1]hept‐2‐yl‐methyl)phenyl] propionic acid, a novel thromboxane antagonist is reported. They are synthesized from either enantiomers of known (1R,2R,3R,4S)‐3‐[2‐(3‐carboxy‐7‐oxabicyclo[2,2,1]hept‐2‐yl‐methyl)phenyl]‐propionic acid methyl ester via epimerization, modified Curtius' rearrangement and sulfonylamino formation. Other derivatives may be prepared similarly.     

Synthesis of laterally attached side‐chain liquid‐crystalline polynorbornenes with high mesogen density by ring‐opening metathesis polymerization

(±)‐exo,endo‐5,6‐Bis{[[11′‐[2″,5″‐bis[2‐(3′‐fluoro‐4′‐n‐alkoxyphenyl)ethynyl]phenyl]undecyl]oxy]carbonyl}bicyclo[2.2.1]hept‐2‐ene (n = 1–12) monomers were polymerized by ring‐opening metathesis polymerization in tetrahydrofuran at room temperature with Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂Ph)(O^tBu)₂ as the initiator to produce polymers with number‐average degrees of polymerization of 8–37 and relatively narrow polydispersities (polydispersity index = 1.08–1.31). The thermotropic behavior of these materials was independent of the molecular weight and therefore representative of that of a polymer at approximately 15 repeat units. The polymers exhibited an enantiotropic nematic mesophase when n was 2 or greater. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4076–4087, 2006     

Synthesis of the Anticodon Hairpin tRNAfMet Containing N‐{[9‐(β‐D‐Ribofuranosyl)‐9H‐purin‐6‐yl]carbamoyl}‐L‐threonine (=N6‐{{[(1S,2R)‐1‐Carboxy‐2‐hydroxypropyl]amino}carbonyl}adenosine,t6A)

As part of our studies on the structure of yeast ^tRNA_f^Met, we investigated the incorporation of N‐{[9‐(β‐D ‐ribofuranosyl)‐9H‐purin‐6‐yl]carbamoyl}‐L ‐threonine (t⁶A) in the loop of a RNA 17‐mer hairpin. The carboxylic function of the L ‐threonine moiety of t⁶A was protected with a 2‐(4‐nitrophenyl)ethyl group, and a (tert‐butyl)dimethylsilyl group was used for the protection of its secondary OH group. The 2′‐OH function of the standard ribonucleotide building blocks was protected with a [(triisopropylsilyl)oxy]methyl group. Removal of the base‐labile protecting groups of the final RNA with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) and then with MeNH₂ was done under carefully controlled conditions to prevent hydrolysis of the carbamate function, leading to loss of the L ‐threonine moiety.     

First Total Synthesis of (±)‐Celaphanol A

The first total synthesis of (±)‐Celaphanol A was accomplished starting from α‐cyclocitral and 3,4‐dimethoxy benzyl chloride in six steps. The intramolecular cyclization with BF₃·Et₂O and enolization in t‐BuOK/t‐BuOH were the key steps. The process of intramolecular cyclization afforded an all‐cis isomer intermediate for synthesis of aromatic tricyclic diterpenes.     

Synthesis of 4‐(Isothiazol‐3‐yl)morpholines and 1‐(Isothiazol‐3‐yl)piperazines,and Their Inhibitory Activity towards Acetylcholinesterase

The synthesis of novel triaryl‐substituted 4‐(isothiazol‐3‐yl)morpholines 7 and 8 , and 1‐(isothiazol‐3‐yl)piperazines 9 – 13 by reaction of the corresponding isothiazolium salts 5 and 6 with secondary amines in the presence of t‐BuOK in absolute THF is described. Some representatives of the isothiazoles were evaluated as inhibitors of acetylcholinesterase from Electrophorus electricus.     

Ring‐opening metathesis polymerization of new norbornene‐based monomers containing various chromophores

Pure exo‐functional norbornene monomers containing various chromophores such as fluorene, pyrene, and carbazole were successfully prepared via the Diels–Alder reaction and condensation reaction. The living ring‐opening metathesis polymerization (ROMP) of a fluorene‐containing monomer, exo‐2‐(fluorene‐9‐ylcarboxymethyl)norborn‐5‐ene (exo‐1), was observed and confirmed by the formation of a diblock copolymer and a linear relationship between the number‐average molecular weight and [M]/[I] ratios ([M] = monomer concentration; [I] = initiator concentration). The synthesis and characteristics of novel fluorene‐containing polymers based on pure exo‐1 are reported with Grubbs catalyst I {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂} with a high molecular weight of 3.18 × 10⁴ in 90 s ([M]/[I] = 100). However, the ROMP of pyrene‐ and carbazole‐containing monomers [exo‐5‐(pyrene methoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene and exo‐5‐(carbazole ethoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene, respectively] were carried out in a nonliving fashion. All the chromophore‐containing polymers showed excellent solubility in various organic solvents, particularly in chloroform, N‐methyl‐2‐pyrrolidinone, and 1,2‐dichlorobenzene. The glass transition temperatures of polynorbornenes containing various chromophores were determined to be 80–109 °C (by differential scanning calorimetry) higher than that of ring‐opened polynorbornene (glass transition temperature = 35 °C), indicating that the incorporation of the pendant aromatic moieties (e.g., fluorene, pyrene, and carbazole) could enhance the transition temperature for segmental motions of polymer chains. The photoluminescence spectra of all polymer solutions showed a strong emission in the blue region of the visible spectra. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3022–3031, 2007     

Kinetic characterization of a transient reaction by degeneration of the precursor mechanism: Application to the synthesis of 3,4‐diazabicyclo[4.3.0]‐ non‐2‐ene

The rate of the oxidation of N‐amino‐3‐azabicyclo[3.3.0]octane by chloramine has been studied by GC and HPLC between pH 10.5 and 13.5. The second‐order reaction exhibits specific acid catalysis. The formation of N,N′‐azo‐3‐azabicyclo[3.3.0]octane or 3,4‐diazabicyclo[4.3.0]non‐2‐ene is pH, concentration, and temperature dependent. In alkaline media, the exclusive formation of 3,4‐diazabicyclo[4.3.0]non‐2‐ene is observed. Kinetic studies show that the oxidation of N‐amino‐3‐azabicyclo[3.3.0]octane by chloramine is a multistep process with the initial formation of a diazene‐type intermediate, which is converted by hydroxide ions into 3,4‐diazabicyclo[4.3.0]non‐2‐ene. Because it was not possible to follow the rate of change of the intermediate concentration, to determine the kinetics of 3,4‐diazabicyclo[4.3.0]non‐2‐ene formation, a procedure based on the degeneration of the precursor process was adopted. An appropriate mathematical treatment allowed a quantitative interpretation of all the phenomena observed over the given pH interval. The activation parameters were determined. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 327–338, 2006     

β‐Ionone reactions with the nitrate radical: Rate constant and gas‐phase products

The bimolecular rate constant of k (9.4 ± 2.4 × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the nitrate radical (NO₃?) with 4‐(2,6,6‐trimethyl‐1‐cyclohexen‐1‐yl)‐3‐buten‐2‐one (β‐ionone) at (297 ± 3) K and 1 atmosphere total pressure. In addition, the products of β‐ionone + NO₃? reaction were also investigated. The identified reaction products were glyoxal (HC(?O)C(?O)H), and methylglyoxal (CH₃C(?O)C(?O)H). Derivatizing agents O‐(2,3,4,5,6‐pentafluorobenzyl)hydroxylamine and N,O‐bis(trimethylsilyl)trifluoroacetamide were used to propose the other major reaction products: 3‐oxobutane‐1,2‐diyl nitrate, 2,6,6‐trimethylcyclohex‐1‐ene‐carbaldehyde, 2‐oxo‐1‐(2,6,6‐trimethylcyclohex‐1‐en‐1‐yl)ethyl nitrate, pentane‐2,4‐dione, 3‐oxo‐1‐(2,6,6‐trimethylcyclohex‐1‐en‐1‐yl)butane‐1,2‐diyl dinitrate, 3,3‐dimethylcyclohexane‐1,2‐dione, and 4‐oxopent‐2‐enal. The elucidation of these products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible β‐ionone + NO₃? reaction mechanisms based on previously published volatile organic compound + NO₃? gas‐phase mechanisms. The additional gas‐phase products 5‐acetyl‐2‐ethylidene‐3‐methylcyclopentyl nitrate, 1‐(1‐hydroxy‐7,7‐dimethyl‐2,3,4,5,6,7‐hexahydro‐1 H‐inden‐2‐yl)ethanone, 1‐(1‐hydroxy‐3a,7‐dimethyl‐2,3,3a,4,5,6,‐hexahydro‐1 H‐inden‐2‐yl)ethanone, and 5‐acetyl‐2‐ethylidene‐3‐methylcyclopentanone are proposed to be the result of cyclization through a reaction intermediate. © 2009 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

Int J Chem Kinet 41: 629–641, 2009     

Chemoselectivity of the Reactions of Diazomethanes with 5‐Benzylidene‐3‐phenylrhodanine

The reactions of 5‐benzylidene‐3‐phenylrhodanine ( 2 ; rhodanine=2‐thioxo‐1,3‐thiazolidin‐4‐one) with diazomethane ( 7a ) and phenyldiazomethane ( 7b ) occurred chemoselectively at the exocyclic C?C bond to give the spirocyclopropane derivatives 9 and, in the case of 7a , also the C‐methylated products 8 (Scheme 1). In contrast, diphenyldiazomethane ( 7c ) reacted exclusively with the C?S group leading to the 2‐(diphenylmethylidene)‐1,3‐thiazolidine 11 via [2+3] cycloaddition and a ‘two‐fold extrusion reaction’. Treatment of 8 or 9b with an excess of 7a in refluxing CH₂Cl₂ and in THF at room temperature in the presence of [Rh₂(OAc)₄], respectively, led to the 1,3‐thiazolidine‐2,4‐diones 15 and 20 , respectively, i.e., the products of the hydrolysis of the intermediate thiocarbonyl ylide. On the other hand, the reactions with 7b and 7c in boiling toluene yielded the corresponding 2‐methylidene derivatives 16, 21a , and 21b . Finally, the reaction of 11 with 7a occurred exclusively at the electron‐poor C?C bond, which is conjugated with the C?O group. In addition to the spirocyclopropane 23 , the C‐methylated 22 was formed as a minor product. The structures of the products (Z)‐ 8, 9a, 9b, 11 , and 23 were established by X‐ray crystallography.     

Controlled ROP of β‐Butyrolactone Simply Mediated by Amidine,Guanidine, and Phosphazene Organocatalysts

Basic organocatalysts of the guanidine (1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene, TBD), amidine (1,8‐diazabicyclo[5.4.0]‐undec‐7‐ene, DBU), and phosphazene (2‐tert‐butylimino‐2‐diethylamino‐1,3‐dimethylperhydro‐1,3,2diazaphosphorine, BEMP) type do effectively polymerize β‐butyrolactone (BL). Poly(3‐hydroxybutyrate)s (PHBs) with controlled molecular features, that is, controlled molar masses, narrow molar mass distributions, and well‐defined functional end groups are thus formed at 60 °C from bulk monomer, with up to 21 500 g mol⁻¹. The formation of α,ω‐guanidine/amidine/phosphazene,crotonate functionalized PHBs, as demonstrated by NMR, SEC, and MALDI–ToF mass spectrometry analyses, mechanistically suggests the formation of N‐acyl‐α,β‐unsaturated propagating species that originate from 1:1 guanidine/amidine/phosphazene:BL adducts.