Synthesis,Olfactory Evaluation,and Determination of the Absolute Configuration of the 3,4‐Didehydroionone Stereoisomers

The synthesis of 3,4‐didehydroionone isomers 4 , (+)‐ 6 , and (?)‐ 6 and of 3,4‐didehydro‐7,8‐dihydroionone isomers 5 , (+)‐ 7 , and (?)‐ 7 was accomplished starting from commercially available racemic α‐ionone ( 1 ). Their preparation of the racemic forms 4 – 7 was first achieved by mean of a number of chemo‐ and regioselective reactions (Schemes 1 and 2). The enantio‐ and diastereoselective lipase‐mediated kinetic acetylation of 4‐hydroxy‐γ‐ionone ( 10a / 10b ) provided 4‐hydroxy‐γ‐ionone (+)‐ 10a /(±)‐ 10b and (+)‐4‐(acetyloxy)‐γ‐ionone ((+) 12b ) (Scheme 3). The latter compounds were used as starting materials to prepare the 3,4‐didehydro‐γ‐ionones (+)‐ and (?)‐ 6 and the 3,4‐didehydro‐7,8‐dihydro‐γ‐ionones (+)‐ and (?)‐ 7 in enantiomer‐enriched form. The absolute configuration of (+)‐ 12b was determine by chemical correlation with (+)‐(6S)‐γ‐ionone ((+)‐ 3 ) and with (?)‐(6S)‐α‐ionone ((?)‐ 1 ) therefore allowing to assign the (S)‐configuration to (+)‐ 6 and (+)‐ 7 . Olfactory evaluation of the above described 3,4‐didehydroionone isomers shows a significant difference between the enantiomers and regioisomers both in fragrance feature and in detection threshold (Table).     

Synthesis of Halogenated α,β‐Unsaturated γ‐Butyrolactone Derivatives by Triphenylphosphine‐Catalyzed Cyclization of α‐Halogeno Ketones with Dialkyl Acetylenedicarboxylates (=Dialkyl But‐2‐ynedioates)

A Ph₃P‐catalyzed cyclization of α‐halogeno ketones 2 with dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) 3 produced halogenated α,β‐unsaturated γ‐butyrolactone derivatives 4 in good yields (Scheme 1, Table). The presence of electron‐withdrawing groups such as halogen atoms at the α‐position of the ketones was necessary in this reaction. Cyclization of α‐chloro ketones resulted in higher yields than that of the corresponding α‐bromo ketones. Dihalogeno ketones similarly afforded the expected γ‐butyrolactone derivatives in high yields.     

Tandem Benzylic Oxidation/Dihydroxylation of α‐Vinyl‐ and α‐Alkenylbenzyl Alcohols

A de novo tandem benzylic oxidative dihydroxylation of α‐vinyl‐ and α‐alkenylbenzyl alcohols has been developed to give α,β‐dihydroxypropiophenones (=2,3‐dihydroxy‐1‐phenylpropan‐1‐ones) and α,β‐dihydroxyalkyl phenones. This method was shown to be substrate‐selective and specific for the oxidation of benzylic alcohols.     

cis‐trans Peptide‐Bond Isomerization in α‐Methylproline Derivatives

α‐Methyl‐L ‐proline is an α‐substituted analog of proline that has been previously employed to constrain prolyl peptide bonds in a trans conformation. Here, we revisit the cis‐trans prolyl peptide bond equilibrium in derivatives of α‐methyl‐L ‐proline, such as N‐Boc‐protected α‐methyl‐L ‐proline and the hexapeptide H‐Ala‐Tyr‐αMePro‐Tyr‐Asp‐Val‐OH. In Boc‐α‐methyl‐L ‐proline, we found that both cis and trans conformers were populated, whereas, in the short peptide, only the trans conformer was detected. The energy barrier for the cis‐trans isomerization in Boc‐α‐methyl‐L ‐proline was determined by line‐shape analysis of NMR spectra obtained at different temperatures and found to be 1.24 kcal/mol (at 298 K) higher than the corresponding value for Boc‐L ‐proline. These findings further illuminate the conformationally constraining properties of α‐methyl‐L ‐proline.     

Helical Poly(α,β‐unsaturated ketone) with Bulky Pendant of Binaphthyl from Anionic Polymerization of ((−)‐Menthyl (S)‐6′‐Acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate

((?)‐Menthyl (S)‐6′‐acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate ( 3 ) was synthesized and anionically polymerized using n‐BuLi as an initiator in toluene. The monomer 3 was levorotatory and had an [α]_D²⁵ value of ?72.4, but its corresponding polymer poly‐ 3 was dextrorotatory and showed an [α]_D²⁵ value of +162.0. Poly‐ 3 was confirmed to exist in the form of one‐handed helical structure in solution by means of comparing the specific optical rotation and the CD spectra with that of 3 and the model compounds such as (?)‐menthyl (S)‐6′‐propionyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2b and (?)‐menthyl (S)‐6′‐heptanoyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2c . This conclusion was also confirmed by the fact that the g‐value of poly‐ 3 is about 11 times of that of monomer 3 .     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

Enantioselective Access to (−)‐Ambrox® Starting from β‐Farnesene

Starting from inexpensive (E)‐β‐farnesene ( 1 ), an eight‐step enantioselective synthesis of the olfactively precious Ambrox^® ((?)‐ 2a ) has been performed. The crucial step is the catalytic asymmetric isomerization of (2E,6E)‐N,N‐diethylfarnesylamine ( 3 ) to the corresponding enamine (?)‐(R,E)‐ 4a , applying Takasago's well‐known industrial methodology. The resulting dihydrofarnesal ((+)‐(R)‐ 5 ) (90% yield, 96% ee), obtained after in situ hydrolysis (AcOH, H₂O), was then cyclized under catalytic SnCl₄ conditions, via its corresponding unreported enol acetate (?)‐(R)‐ 4b , to afford trans‐decalenic aldehyde (+)‐ 6a . Subsequent transformations furnished bicyclic ketone (?)‐ 8a and unsaturated nitrile (+)‐ 11 , both reported as intermediates to access to (?)‐ 2a .     

Synthesis and Characterization of Enantiomerically Pure cis‐ and trans‐3‐Fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphadecalin 3‐Oxides as γ‐Homoacetylcholine Mimetics and Inhibitors of Acetylcholinesterase

The title compounds, the P(3)‐axially and P(3)‐equatorially substituted cis‐ and trans‐configured 8‐benzyl‐3‐fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphadecalin 3‐oxides (=8‐benzyl‐3‐fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphabicyclo[4.4.0]decane 3‐oxides=2‐fluorohexahydro‐6‐(phenylmethyl)‐4H‐1,3,2‐dioxaphosphorino[5,4‐c]pyridine 2‐oxides) were prepared (ee>98%) and fully characterized (Schemes 2 and 3). The absolute configurations were established from that of their precursors, the enantiomerically pure cis‐ and trans‐1‐benzyl‐4‐hydroxypiperidine‐3‐methanols which were unambiguously assigned. Being configuratively fixed and conformationally constrained phosphorus analogues of acetyl γ‐homocholine (=3‐(acetyloxy)‐N,N,N‐trimethylpropan‐1‐aminium), they are suitable probes for the investigation of molecular interactions with acetylcholinesterase. As determined by kinetic methods, all of the compounds are weak inhibitors of the enzyme.     

Enzyme‐Mediated Preparation of (+)‐ and (−)‐β‐Irone and (+)‐ and (−)‐cis‐γ‐Irone from Irone alpha®

The (−)‐ and (+)‐β‐irones ((−)‐ and (+)‐ 2 , resp.), contaminated with ca. 7 – 9% of the (+)‐ and (−)‐trans‐α‐isomer, respectively, were obtained from racemic α‐irone via the 2,6‐trans‐epoxide (±)‐ 4 (Scheme 2). Relevant steps in the sequence were the LiAlH₄ reduction of the latter, to provide the diastereoisomeric‐4,5‐dihydro‐5‐hydroxy‐trans‐α‐irols (±)‐ 6 and (±)‐ 7 , resolved into the enantiomers by lipase‐PS‐mediated acetylation with vinyl acetate. The enantiomerically pure allylic acetate esters (+)‐ and (−)‐ 8 and (+)‐ and (−)‐ 9 , upon treatment with POCl₃/pyridine, were converted to the β‐irol acetate derivatives (+)‐ and (−)‐ 10 , and (+)‐ and (−)‐ 11 , respectively, eventually providing the desired ketones (+)‐ and (−)‐ 2 by base hydrolysis and MnO₂ oxidation. The 2,6‐cis‐epoxide (±)‐ 5 provided the 4,5‐dihydro‐4‐hydroxy‐cis‐α‐irols (±)‐ 13 and (±)‐ 14 in a 3 : 1 mixture with the isomeric 5‐hydroxy derivatives (±)‐ 15 and (±)‐ 16 on hydride treatment (Scheme 1). The POCl₃/pyridine treatment of the enantiomerically pure allylic acetate esters, obtained by enzymic resolution of (±)‐ 13 and (±)‐ 14 , provided enantiomerically pure cis‐α‐irol acetate esters, from which ketones (+)‐ and (−)‐ 22 were prepared (Scheme 4). The same materials were obtained from the (9S) alcohols (+)‐ 13 and (−)‐ 14 , treated first with MnO₂, then with POCl₃/pyridine (Scheme 4). Conversely, the dehydration with POCl₃/pyridine of the enantiomerically pure 2,6‐cis‐5‐hydroxy derivatives obtained from (±)‐ 15 and (±)‐ 16 gave rise to a mixture in which the γ‐irol acetates 25a and 25b and 26a and 26b prevailed over the α‐ and β‐isomers (Scheme 5). The (+)‐ and (−)‐cis‐γ‐irones ((+)‐ and (−)‐ 3 , resp.) were obtained from the latter mixture by a sequence involving as the key step the photochemical isomerization of the α‐double bond to the γ‐double bond. External panel olfactory evaluation assigned to (+)‐β‐irone ((+)‐ 2 ) and to (−)‐cis‐γ‐irone ((−)‐ 3 ) the strongest character and the possibility to be used as dry‐down note.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Highly Enantioselective Iridium‐Catalyzed Hydrogenation of α,β‐Unsaturated Esters

α,β‐Unsaturated esters have been employed as substrates in iridium‐catalyzed asymmetric hydrogenation. Full conversions and good to excellent enantioselectivities (up to 99 % ee) were obtained for a broad range of substrates with both aromatic‐ and aliphatic substituents on the prochiral carbon. The hydrogenated products are highly useful as building blocks in the synthesis of a variety of natural products and pharmaceuticals.     

Crystal Structure and Spectroscopic Properties of cis‐β‐Diazido(1,4,7,11‐tetraazaundecane)chromium(III) Bromide

The new complex, cis‐β‐[Cr(2,2,3‐tet)(N₃)₂]Br (2,2,3‐tet = 1,4,7,11‐tetraazaundecane), was prepared and its structure was determined by single‐crystal X‐ray diffraction. The chromium(III) atom is in a distorted octahedral environment coordinated by four nitrogen atoms of 2,2,3‐tet and two azido ligands in a cis‐β arrangement, with bent Cr–N₃ linkages at the coordinating azide nitrogen atoms. The mean Cr–N(2,2,3‐tet) and Cr–N(azide) bond lengths are 2.084(5) and 2.021(5) Å, respectively. The crystal structure is stabilized by ionic interactions, supported by N–H ··· N(azide) and N–H ··· Br hydrogen bonds. The IR and electronic spectroscopic properties are also discussed.     

A Novel Method for the Asymmetric Synthesis of α,β‐Diamino Acids by a Glucose‐Mediated Stereoselective Strecker Reaction

A novel method for the asymmetric synthesis of α,β‐diamino acids by using the 2,3,4,6‐tetra‐O‐pivaloyl‐β‐D ‐glucopyranosyl group (Piv₄Glc) as chiral auxiliary was developed (Table and Scheme). The reaction was promoted by CuBr?Me₂S as Lewis acid, and high yields and good diastereoselectivities were achieved.     

Highly Regioselective C(3) Opening of an Aromatic 2,3‐Epoxy Alcohol with Sodium Phenoxides or Thiophenoxides (=Benzenethiolates) Supported by β‐Cyclodextrin in Water

A simple and mild procedure was developed for the first time for the C(3)‐selective ring opening of an aromatic 2,3‐epoxy alcohol, i.e., of trans‐3‐phenyloxirane‐2‐methanol ( 1 ), with sodium phenoxides or thiophenoxides (=benzenethiolates) 2 supported by β‐cyclodextrin in H₂O at 50° to afford the corresponding 3‐(aryloxy)‐ or 3‐(arylthio)propane1,2‐diols 3 in excellent yields (Scheme, Table).     

One‐Pot Diastereoselective Synthesis of Densely Functionalized 2H‐Indeno[2,1‐b]furans. Single‐Crystal X‐Ray Structure of Dimethyl 8,8a‐Dihydro‐8‐oxo‐8a‐(2,2,2‐trichloroethoxy)‐2H‐indeno[2,1‐b]furan‐2,3‐di­carboxylate

Highly reactive 1 : 1 intermediates were produced in the reaction of Ph₃P and dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates). Protonation of these intermediates by alcohols (2,2,2‐trichloroethanol, propargyl alcohol (=prop‐2‐yn‐1‐ol), MeOH, benzyl alcohol, and allyl alcohol (=prop‐2‐en‐1‐ol) led to vinyltriphenylphosphonium salts 4 , which underwent a Michael addition reaction with the conjugate base to produce the corresponding stabilized phosphonium ylides 5 (Scheme). Wittig reaction of the stabilized phosphonium ylides with ninhydrin ( 6 ) led to the corresponding densely functionalized 2H‐indeno[2,1‐b]furans 10 in fairly good yields (Table 1). The structures of the final products were confirmed by IR, ¹H‐ and ¹³C‐NMR spectroscopy, and mass spectrometry. The configuration of dimethyl 8,8a‐dihydro‐8‐oxo‐8a‐(2,2,2‐trichloroethoxy)‐2H‐indeno[2,1‐b]furan‐2,3‐dicarboxylate ( 10a ) was established by a single‐crystal X‐ray structure determination, establishing that the one‐pot multicomponent condensation reaction was completely diastereoselective.     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

On the Reactivity of (−)‐(R)‐Carvone and (−)‐4aα,7α,7aβ‐Nepetalactone: Synthesis of New Heterocycles

The 1,3‐dipolar cycloaddition of 4‐chlorobenzonitrile oxide to the unsaturated system of (?)‐(R)‐carvone occurred exclusively at C(8) to give a new isoxazoline derivative. This derivative reacts with NH₂OH to yield a new heterocycle, observed for the first time. On the other hand, the addition of 4‐chlorobenzonitrile oxide to the unsaturated lactone (?)‐4aα,7α,7aβ‐nepetalactone gave, in a good yield, also a new heterocycle, again obtained for the first time. The terpenoid (?)‐(R)‐carvone and iridoid (?)‐4aα,7α,7aβ‐nepetalactone were isolated from Moroccan species Mentha viridis (L.) and Nepeta tuberosa (L.), respectively. The new heterocycles obtained were identified by combination of chromatographic and spectroscopic methods.     

Facile and Selective Synthesis of 4‐Methyl‐ and 4‐Phenylthiosemicarbazide (=N‐Methyl‐ and N‐Phenylhydrazinecarbothioamide) Derivatives of Benzil (=1,2‐Diphenylethane‐1,2‐dione)

A selective synthesis of 4‐methylthiosemicarbazide (=N‐methylhydrazinecarbothioamide; 4a ) derivatives by reaction with benzil (=1,2‐diphenylethane‐1,2‐dione; 3 ) is described. The reaction conditions determined the condensation product formed. The most important factor was the acid used: in the presence of conc. HCl solution, the open‐chain 2 : 1 compound 1a was exclusively obtained, whereas in the presence of 2M HCl, the cyclic 1 : 1 condensation product 2a was formed. The alcohol used, the presence of H₂O, and the time of heating were additional crucial factors. The new cyclic compound 2a with a MeO group was exclusively formed when working under high‐dilution conditions. The reaction with the 4‐phenyl derivative 4b gave new cyclic compounds as the major products under all conditions used (Scheme).     

Asymmetric Synthesis of the cis‐ and trans‐3,4‐Dihydro‐2,4,8‐trihydroxynaphthalen‐1(2H)‐ones

A short and efficient protocol for the asymmetric synthesis of cis‐ and trans‐3,4‐dihydro‐2,4,8‐trihydroxynaphthalen‐1(2H)‐one ( 1 and 2 , resp.) is described, with a phthalide annulation as the key step. Introduction of a OH substituent at position 2 was performed by Sharpless dihydroxylation of a silyl enol ether or by means of an N‐sulfonyloxaziridine. The absolute configuration of each isomer was determined via Mosher‐ester derivatives. By comparison with previously recorded CD spectra of our natural sample, we established that the natural trans‐ and cis‐isomers from Ceratocystis fimbriata sp. platani were the (?)‐(2S,4S)‐isomer (?)‐ 2 and the (+)‐(2S,4R)‐isomer (+)‐ 1 , respectively.     

A Practical and Enantiospecific Synthesis of (−)‐(R)‐ and (+)‐(S)‐Piperidin‐3‐ols

A highly enantiospecific, azide‐free synthesis of (?)‐(R)‐ and (+)‐(S)‐piperidin‐3‐ol in excellent yield was developed. The key step of the synthesis involves the enantiospecific ring openings of enantiomerically pure (R)‐ and (S)‐2‐(oxiran‐2‐ylmethyl)‐1H‐isoindole‐1,3(2H)‐diones with the diethyl malonate anion and subsequent decarboxylation.