Micellar catalysis in reactions of some β-lactam antibiotics with p -dimethylaminobenzaldehyde

Kinetic study of the reactions of amoxicillin (I), ampicillin (II) and cephlaxin (III) with p-dimethylaminobenzaldehyde (DAB) in weakly acidic EtOH/H₂O solution has been investigated using spectrophotometric method. Relatively slow reversible reactions of first order with respect to the antibiotic have been found. A derived equation for detecting the existence of reversibility from the linearity has been introduced. The effect of anionic surfactants (sodium dodecyl sulfate, SDS) on the kinetic of these reactions in aqueous solution has been studied. The presence of 0.005 M of SDS increases the rate constants by 4.3, 2 and 3.3 times for I, II and III, respectively. The consequence of the rate constants have a similar order in absence and presence of SDS; III > II > I. The rate constants pass through maxima with increasing SDS concentration followed by a gradual but steady decrease in the rate as the surfactant concentration increases further. Multiple linear regression method has been performed to evaluate the binding constants of each drug and DAB with SDS from the resulted kinetic data. The results suggest using multiple linear correlation method for such calculations, which is more accurate, reliable and less time consuming. The calculated binding constants between these drugs with SDS are following the consequence I > II > III which is related to the differences in their substitutions. The kinetic results were employed for spectrophotometric microdetermination of these drugs (I–III) in aqueous solution. The method was based on the reaction of β-lactam with an excess of DAB in presence of SDS and HCl (pH 2) at a wavelength 410 nm. The results indicate that the presented method is simple, precise and accurate. This method is applied to bulk antibiotics and some of their pharmaceutical preparations.     

Single‐Electron Transfer in σ‐Complexation Reactions of 2,6‐Dimethoxy‐3,5‐dinitropyridine with Para‐X‐phenoxide Anions in Aqueous Solution

Second‐order rate constants have been measured spectrophotometrically for reactions of 2,6‐dimethoxy‐3,5‐dinitropyridine 1 with 4‐X‐substituted phenoxide anions (X = OMe, Me, H, Cl, and CN) 2a–e in aqueous solution at various temperatures. The effect of phenoxide substituents on the reaction rate was examined quantitatively on the basis of kinetic measurements, leading to nonlinear correlations of Δ^≠H and Δ^≠S with Hammett's substituent constants (σ). Each Hammett plots exhibits two intersecting straight lines for the reactions of 1 with the phenoxide anions 2a–e , whereas the Yukawa–Tsuno plots for the same reactions are linear. The large negative ρ values (?4.03 to ?3.80) obtained for the reactions of 1 with the phenoxide anions possessing an electron‐donating group supports the proposal that the reactions proceed through a single‐electron transfer mechanism.     

Micellar effects on the rates of the condensation reaction between copper(II)‐histidine complex and ninhydrin

The kinetics of formation of N‐diketohydrindylidenehistidinatocopper(II) complex has been investigated in the presence of cationic cetyltrimethylammonium bromide (CTAB) surfactant in aqueous medium (pH = 5.0). Similarly in aqueous solution, the reaction followed irreversible first‐order kinetics with respect to [Ninhydrin]. Although the reaction mechanism remained unaltered by micelles, a typical k_ψ‐[CTAB] profile was observed, that is, with a progressive increase in [CTAB], the reaction rate increased, reached a maximum value, and then decreased. The results are treated quantitatively in terms of the kinetic pseudo‐phase model. Activation parameters were also evaluated and a large decrease in ΔS^# shows the formation of a well‐structured activated complex. It was found that anionic sodium dodecyl sulphate (SDS) and non‐ionic Triton X‐100 (TX‐100) surfactants have no effect on the reaction. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 729–736, 1999     

Micellar Effect on the Reaction of Chromium(VI) Oxidation of L‐Sorbose in the Presence and Absence of Picolinic Acid in Aqueous Acid Media: A Kinetic Study

The kinetics and mechanism of chromic acid oxidation of L‐sorbose in the presence and absence of picolinic acid (PA) have been studied under the conditions, [L‐sorbose]_T » [PA]_T » [Cr(VI)]_T, at different temperatures. In the absence of PA, the monomeric chromic acid undergoes esterification with the substrate followed by the acid catalysed redox decomposition of the Cr(VI)‐substrate ester through glycol splitting to formaldehyde and the lactone of C₅‐aldonic acid and Cr(IV) which subsequently participates in the faster reactions. In the presence of PA, the Cr(VI)‐PA complex produced in a pre‐equilibrium step experiences a nucleophilic attack by the substrate to produce a ternary complex which decomposes through glycol splitting giving rise to the organic products and Cr(IV)‐PA complex. Both the uncatalysed and PA‐catalysed paths show the first‐order dependence on [L‐sorbose]_T and [Cr(VI)]_T. The PA‐catalysed path is first‐order in [PA]_T and it shows a fractional order in [H⁺]. The uncatalysed path shows a second‐order dependence on [H⁺]. In the presence of the surfactants like N‐cetylpyridinium chloride (CPC, a cationic surfactant) and sodium dodecyl sulfate (SDS, an anionic sulfate), the reaction orders remain unchanged. CPC has been found to inhibit both the uncatalysed and PA‐catalysed paths while SDS shows the rate accelerating effect for both the uncatalysed and PA‐catalysed paths. The observed micellar effects have been rationalised by considering the distribution of the reactants between the micellar and aqueous phases in terms of the proposed reaction mechanism.     

Ionic Self‐Assembled Platform of Perylenediimide–Sodium Dodecylsulfate for Detection of Spermine in Clinical Samples

The detection and quantification of spermine in clinical practice is important for early diagnosis of many diseases. Chromatographic and immunoassay‐based methods are commonly used. However, a fluorescence‐based assay could provide real‐time detection. Herein, the synthesis and aggregation properties of a dicationic perylene probe (N ¹‐dodecyl‐N ³‐(4‐phenyl)benzimidazolium‐functionalized perylenediimide ( DAB‐PDI )) used to develop a fluorescent “turn‐on” ensemble for the detection of spermine are discussed. The fluorescence of DAB‐PDI (10 μm , Φ =0.55) is efficiently quenched by negatively charged sodium dodecylsulfate (SDS) through the formation of ionic self‐assembled aggregates (charge ratio of negative (N) in SDS to positive (P) in DAB‐PDI (N/P)=9). This negatively charged ionic self‐assembly between DAB‐PDI and SDS has been characterized by using photophysical, microscopic, dynamic light scattering, isothermal titration calorimetry, and HRMS techniques. The addition of spermine to this ensemble solution results in the breakdown of the DAB‐PDI –SDS ensemble owing to strong binding of spermine with SDS and, as a result, the fluorescence of DAB‐PDI is recovered. This ensemble exhibits high sensitivity and selectivity for spermine detection in water, urine, and blood serum. The lowest limit of detection is 27.5 nm , which is at least about 36 times lower than that required for early diagnosis of cancer (1 to 10 μm for urinary spermine).     

Role of manganese(II), micelles,and inorganic salts on the kinetics of the redox reaction of L‐sorbose and chromium(VI)

The kinetics of the reduction of chromium(VI) to chromium(III) by L ‐sorbose in HClO₄ was studied between 30 and 80°C at various concentrations of reactants and acidities in both aqueous and micellar sodium dodecyl sulfate (SDS)/TritonX‐100(TX‐100) solutions. Under pseudo‐first‐order conditions the reaction rate is fractional‐order in [L ‐sorbose] and [H⁺], and first‐order in [Cr^VI] both in the absence and in the presence of surfactant micelles. The reaction is accelerated by addition of manganese(II) and is routed through the same mechanism as shown by the kinetic studies in the absence and presence of surfactants. The rate enhancement in presence of SDS/TX‐100 micelles indicates that essentially all the reactive species are bound to micelles under the experimental conditions. The observed catalyses are explained with the modified Menger and Portnoy model. Inorganic salts (NaBr, LiBr, NH₄Br) inhibit the reaction in presence of SDS micelles, which confirms exclusion of the reactive species of chromium(VI) from the reaction site. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 543–554, 2003     

Alkyl‐Group Selection in an Acidic‐Surfactant‐Promoted Reaction of Homoallyl Alcohols and Aldehydes in Water

The hydrophobic effect in the reaction of a homoallyl alcohol with an aldehyde (Yadav's reaction system) under aqueous conditions in the presence of an acidic surfactant was studied indicating the presence of the alkyl‐substituent effect, although not a dramatic one. The DBSA‐promoted reaction proceeds relatively faster when both the homoallyl alcohol and the aldehyde carry a cycloalkyl group (DBSA=4‐dodecylbenzenesulfonic acid). In contrast, the reaction of the substrates having an unbranched alkyl group is relatively more favorable in SDS/HCl than in DBSA (SDS=sodium dodecyl sulfate).     

Kinetics of colloidal MnO<Subscript>2</Subscript> reduction by L-arginine in absence and presence of surfactants

The kinetics of the oxidation of L-arginine by water-soluble form of colloidal manganese dioxide has been studied using visible spectrophotometry in aqueous as well as micellar media. To obtain the rate constants as functions of [L-arginine], [MnO₂] and [HClO₄], pseudo-first-order conditions are maintained in each kinetic run. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [L-arginine] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. The effect of externally added manganese(II) sulphate is complex. It is not possible to predict the exact dependence of the rate constant on manganese(II) concentration, which has a series of reactions with other reactants. The anionic surfactant SDS neither catalyzed nor inhibited the oxidation reaction, while in presence of cationic surfactant CTAB the reaction is not possible due to flocculation of reaction mixture. The reaction is catalyzed by the nonionic surfactant TX-100 which is explained in terms of the mathematical model proposed by Tuncay et al. Activation parameters have been evaluated using Arrhenius and Eyring equations. On the basis of observed kinetic results, a probable mechanism for the reaction has been proposed which corresponds to fast adsorption of the reductant and hydrogen ion on the surface of colloidal MnO₂.     

Rate constants for the gas‐phase reactions of chlorine atoms with 1,4‐cyclohexadiene and 1,5‐cyclooctadiene at 298 K

Rate constants for the reactions of Cl atoms with two cyclic dienes, 1,4‐cyclohexadiene and 1,5‐cyclooctadiene, have been determined, at 298 K and 800 Torr of N₂, using the relative rate method, with n‐hexane and 1‐butene as reference molecules. The concentrations of the organics are followed by gas chromatographic analysis. The ratios of the rate constants of reactions of Cl atoms with 1,4‐cyclohexadiene and 1,5‐cyclooctadiene to that with n‐hexane are measured to be 1.29 ± 0.06 and 2.19 ± 0.32, respectively. The corresponding ratios with respect to 1‐butene are 1.50 ± 0.16 and 2.36 ± 0.38. The absolute values of the rate constants of the reaction of Cl atom with n‐hexane and 1‐butene are considered as (3.15 ± 0.40) × 10^?10 and (3.21 ± 0.40) × 10^{? 10} cm³ molecule^?1s^?1, respectively. With these, the calculated values are k(Cl + 1,4‐cyclohexadiene) = (4.06 ± 0.55) × 10^?10 and k(Cl + 1,5‐cyclooctadiene) = (6.90 ± 1.33) × 10^?10 cm³ molecule^?1 s^?1 with respect to n‐hexane. The rate constants determined with respect to 1‐butene are marginally higher, k(Cl + 1,4‐cyclohexadiene) = (4.82 ± 0.80) × 10^{? 10} and k(Cl + 1,5‐cyclooctadiene) = (7.58 ± 1.55) × 10^{? 10} cm³ molecule^?1 s^?1. The experiments for each molecule were repeated three to five times, and the slopes and the rate constants given above are the average values of these measurements, with 2σ as the quoted error, including the error in the reference rate constant. The relative rate ratios of 1,4‐cyclohexadiene with both the reference molecules are found to be higher in the presence of oxygen, and a marginal increase is observed in the case of 1,5‐cyclooctadiene. Benzene is identified as one major product in the case of 1,4‐cyclohexadiene. Considering that the cyclohexadienyl radical, a product of the hydrogen abstraction reaction, is quantitatively converted to benzene in the presence of oxygen, the fraction of Cl atoms that reacts by abstraction is estimated to be 0.30 ± 0.04. The atmospheric implications of the results are discussed. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 431–440, 2011     

Rate constants and activation energies for ozonolysis of isoprene methacrolein and methyl‐vinyl‐ketone in aqueous solution: Significance to the in‐cloud ozonation of isoprene

Rate constants and activation energies for the reactions of ozone with isoprene, methacrolein, and methyl‐vinyl‐ketone in aqueous solution have been determined at temperatures from 5 to 30°C, using the stopped‐flow‐technique and monitoring ozone decay. The rate constants at 25°C and the activation energies have been found to be 4.1 (±0.2) × 10⁵ M⁻¹ s⁻¹ and 19.9 (±0.5) kJ mol⁻¹ for isoprene, 2.4 (±0.1) × 10⁴ M⁻¹ s⁻¹ and 23.9 (±0.5) kJ mol⁻¹ for methacrolein, and 4.4 (±0.2) × 10⁴ M⁻¹ s⁻¹ and 18.0 (±0.5) kJ mol⁻¹ for methyl‐vinyl‐ketone. A UV spectrum of a transient intermediate with a lifetime of about 15 s formed during the ozonation of isoprene was obtained in the range 220 to 300 nm. It rises steadily toward 220 nm. It is suggested that the spectrum can be attributed to the two unsaturated Criegee‐intermediates (carbonyl oxides), which would conceivably be stabilized by resonance. Lifetime considerations indicate that the oxidation of isoprene and its first‐generation reaction products, methacrolein and methyl‐vinyl‐ketone, by ozone and OH in the aqueous phase of a cloud environment play only a minor role compared to homogeneous gas‐phase processing. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 182–190, 2001     

Kinetics of the reactions of OH radicals with 2‐methoxy‐6‐(trifluoromethyl)pyridine,diethylamine, and 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol at 298 ± 2 K

Rate constants for the reactions of 2‐methoxy‐6‐(trifluoromethyl)pyridine, diethylamine, and 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol with OH radicals have been measured at 298 ± 2 K using a relative rate method. The measured rate constants (cm³ molecule^?1 s^?1) are (1.54 ± 0.21) × 10^?12 for 2‐methoxy‐6‐(trifluoromethyl)pyridine, (1.19 ± 0.25) × 10^?10 for diethylamine, and (1.76 ± 0.38) × 10^?12 for 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol, where the indicated errors are the estimated overall uncertainties including those in the rate constants for the reference compounds. No reaction of 2‐methoxy‐6‐(trifluoromethyl)pyridine with gaseous nitric acid was observed, and an upper limit to the rate constant for the reaction of 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol with O₃ of <7 × 10^{? 20} cm³ molecule^?1 s^?1 was determined. Using a 12‐h average daytime OH radical concentration of 2 × 10⁶ molecule cm^?3, the lifetimes of the volatile organic compounds studied here with respect to reaction with OH radicals are 7.5 days for 2‐methoxy‐6‐(trifluoromethyl)pyridine, 1.2 h for diethylamine, and 6.6 days for 1,1,3,3,3‐pentamethyldisiloxan‐1‐ol. Likely reaction mechanisms are discussed. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 631–638, 2011     

Effects of nonionic micellar aggregates on the electron transfer reaction between l‐glutamic acid and gold(III) complexes

The effect of nonionic micelles of Triton X‐100 on the oxidative decarboxylation of l ‐glutamic acid by chloroaurate(III) complexes has been investigated in acetate buffer medium. The reaction is first order with respect to Au(III), but a complex order with respect to glutamate. H⁺ ion has both accelerating and retarding effects in the pH range 3.72–4.80, whereas a Cl^? ion has an inhibiting effect in the range 0.02–0.56 mol dm^?3. Under the experimental conditions, AuCl^?₄ and AuCl₃(OH)^? are the predominant and effective oxidizing species, whereas the zwitterion (H₂A) and mononegative anion (HA^?) are the predominant reducing species of the amino acid. The reaction involves a one‐step two‐electron transfer process and passes through the intermediate formation of iminic cation. In the presence of surfactant, the reaction passes through a maximum and it appears to follow Berezin's model, where both the oxidant and the substrate are partitioned between the aqueous and the micellar phase and then react. The binding constants between the reactants and the surfactant have been evaluated at different temperatures. Compensation between substrate–water interaction and substrate–micelle interaction plays an important role in such redox reactions in the presence of a surfactant. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 482–493, 2012     

Effects of Micellar Aggregates on the Kinetics and Mechanism of the Reaction between 4‐Nitrobenzenediazonium Ions and Some Amino Acids

We have explored the kinetics and mechanism of the reaction between 4‐nitrobenzenediazonium ions (4NBD), and the hydrophilic amino acids (AA) glycine and serine in the presence and absence of sodium dodecyl sulfate (SDS) micellar aggregates by means of UV/VIS spectroscopy. The observed rate constants k_obs were obtained by monitoring the disappearance of 4NBD with time at a suitable wavelength under pseudo‐first‐order conditions. In aqueous acid (buffer‐controlled) solution, in the absence of SDS, the dependence of k_obs on [AA] was obtained from the linear relationship found between the experimental rate constant and [AA]. At a fixed amino acid concentration, k_obs values show an inverse dependence on acidity in the range of pH 5–6, suggesting that the reaction takes place through the nonprotonated amino group of the amino acid. All kinetic evidence is consistent with an irreversible bimolecular reaction with k=2390±16 and 376±7 M ^?1 s^?1 for glycine and serine, respectively. Addition of SDS inhibits the reaction because of the micellar‐induced separation of reactants originated by the electrical barrier imposed by the SDS micelles; k_obs values are depressed by factors of 10 (glycine) and 6 (serine) on going from [SDS]=0 up to [SDS]=0.05M . The hypothesis of a micellar‐induced separation of the reactants was confirmed by ¹H‐NMR spectroscopy, which was employed to investigate the location of 4NBD in the micellar aggregate: the results showed that the aromatic ring of the arenediazonium ion is predominantly located in the vicinity of the C(β) atom of the surfactant chain, and hence the reactive ? N group is located in the Stern layer of the micellar aggregate. The kinetic results can be quantitatively interpreted in terms of the pseudophase kinetic model, allowing estimations of the association constant of 4NBD to the SDS micelles.     

Polystyrene latices containing dodecanamide‐modified poly(propyleneimine) dendrimers

Polymerization of styrene in aqueous dispersions of the dodecanamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₆₄ and sodium dodecyl sulfate (SDS) produced stable latices. With initial SDS concentrations of 10 mM or less, molar ratios of SDS to dendrimer end groups ranging from 2.3:1 to 9.5:1, and less than 10 wt % of SDS relative to styrene, the polystyrene latices had diameters of 30–60 nm and coefficients of variation of diameters of less than 10% when measured by transmission electron microscopy. Higher concentrations of SDS gave more polydisperse latices. The polystyrene latices formed with SDS and the dodecanamide‐modified dendrimer were almost the same size and polydispersity as those formed with SDS and the parent primary amine dendrimer DAB‐dendr‐(NH₂)₆₄. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 597–605, 2003     

The solvent effects in the reactions of carboxylic acids with oxiranes. 1. Kinetics of the reaction of acetic acid with epichlorohydrin in butan‐1‐ol

Kinetics of the reaction of acetic acid with epichlorohydrin in the presence of chromium(III) acetate in butan‐1‐ol solution have been studied. The partial reaction orders with respect to reagents were found. The reactions were of first‐order with respect to both epichlorohydrin and catalyst and zeroth order with respect to acetic acid. A kinetic model for the overall process has been proposed. The reaction constants have been calculated along with the activation parameters. The effect of dilution on the rate of addition is discussed. In the equimolar mixture of acetic acid and epichlorohydrin the apparent rate constant of the addition k₁ initially decreases to increase again at the concentration of butan‐1‐ol exceeding 3 M. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 378–387, 2000     

Influence of Amine‐Based Cationic Gemini Surfactants on Catalytic Activity of α‐Chymotrypsin

The α‐chymotrypsin activity was tested in aqueous media with the presence of novel cationic amine–based gemini surfactant, with different spacer chain lengths and head group size, and also compared with the cationic cetyltrimethylammonium bromide (CTAB) and cetyltriphenylphosphonium bromide (CTPB) surfactants and aqueous buffer only. The p‐nitrophenyl acetate (PNPA) hydrolysis rate was monitored in the presence of the surfactant concentration at 30°C. Most of these gemini surfactants gave higher catalytic activity as compared to cationic CTAB and CTPB. The highest superactivity was measured in the presence of gemini 16‐12‐16, [dodecanediyl‐1,12‐bis(cetyldimethylammonium bromide)] surfactant at pH 7.5. The catalytic reaction follows the Michaelis–Menten mechanism. The catalytic rate constants, k_cat, show the same profile that the catalytic affinity; K_M being enhanced with increasing space chain length. The results are favorable for considering that the amine‐based gemini surfactant influences more than both the aqueous and cationic micellar media.     

Kinetics of electropolymerization of 1‐amino‐9,10‐anthraquinone

1‐Amino‐9,10‐anthraquinone was electropolymerized on platinum substrates either from aqueous or nonaqueous electrolytes. The aqueous electrolyte was 6.0 mol L^?1 H₂SO₄, and the nonaqueous solvent was acetonitrile containing lithium perchlorate, LiClO₄, as a supporting electrolyte. The formed polyaminoanthraquinone was stable, and the polymerization process was reproducible. The kinetics of the electropolymerization process was investigated by determining the charge consumed during the electropolymerization as a function of time at different concentrations of the electrolyte components. The results of chronoamperometry have been used to determine the orders of reaction. In either aqueous or nonaqueous solution, the electropolymerization process follows first‐order kinetics with respect to the monomer concentration. In nonaqueous solution, the very small concentrations of water did not affect the order of reaction. The order of reaction with respect to the traces of water and the supporting electrolyte concentration was found to be zero. In aqueous solution, the order of the electropolymerization reaction with respect to the concentration of H₂SO₄ was found to be negative (?0.66), which means that the aqueous electrolyte inhibits the polymerization reaction. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 141–146, 2011     

Kinetic Study and Mechanism Hydrolysis of 4‐Bromo‐3,5 dimethylphenyl N‐methylcarbamate in Aqueous Media

Degradation via hydrolysis is among the main transformation pathways and particularly for N‐methylcarbamates. Carbamate pesticide hydrolysis is known to proceed through alkaline catalysis, with reaction of the hydroxide ion with the carbonyl function or with abstraction of hydrogen in the α position with respect to the carbonyl. This reaction leads to the formation of methylamine and corresponding phenol. In this respect, the reaction kinetics of 4‐bromo‐3,5‐dimethylphenyl N‐methylcarbamate (BDMC) hydrolysis have been investigated in alkaline solution using a spectrophotometric technique and reversed phase liquid chromatography. The kinetic constants were determined following a proposed pseudo–first‐order kinetic model. The positive activation entropy ΔS ^≠ = +35.73 J mol⁻¹ K⁻¹ and the absence of general base catalysis indicated an unimolecular elimination conjugate base (E1cB) hydrolytic mechanism involving the formation of methyl isocyanate. This result was confirmed by the fact that BDMC fits well into brönsted and Hammett lines, obtained for a series of substituted N‐methylcarbamate whose decomposition in aqueous media was established to follow an E1cB mechanism.     

Kinetic study of 2‐furanaldehyde, 3‐furanaldehyde,and 5‐methyl‐2‐furanaldehyde reactions initiated by Cl atoms

Rate coefficients for the gas‐phase reactions of chlorine atoms with a series of furanaldehydes have been determined at 298 ± 2 K and atmospheric pressure (708.5 ± 0.1). The experiments were performed using the relative technique combined with solid‐phase microextraction (SPME) sampling and gas chromatography with flame ionization detection (GC‐FID). Rate constants were determined relative to the reaction of Cl with n‐nonane and 2‐ethylfuran. The absolute rate coefficients k (in units of 10^?10 cm³ molecule^?1 s^?1) obtained were 2.61 ± 0.27 for 2‐furaldehyde, 3.15 ± 0.27 for 3‐furaldehyde, and 4 ± 0.5 for 5‐methyl‐2‐furaldehyde. This study shows that the reactions of furanaldehydes and Cl are very fast with little influence of the position of the aldehyde group or the presence of other substituent on the reactivity. The results seem to indicate a mechanism involving two main reaction channels, addition of chlorine atom to the double bond of the aromatic ring, and the abstraction of the aldehydic hydrogen. Further product studies are necessary to determine the mechanism of these reactions in more detail. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 670–678, 2008