Tandem Hydroformylation/Reductive Amination of 3‐Allyl‐2‐methylquinazolin‐4(3H)‐one

The 3‐allyl‐2‐methylquinazolin‐4(3H)‐one ( 1 ), a model functionalized terminal olefin, was submitted to hydroformylation and reductive amination under optimized reaction conditions. The catalytic carbonylation of 1 in the presence of Rh catalysts complexed with phosphorus ligands under different reaction conditions afforded a mixture of 2‐methyl‐4‐oxoquinazoline‐3(4H)‐butanal ( 2 ) and α,2‐dimethyl‐4‐oxoquinazoline‐3(4H)‐propanal ( 3 ) as products of ‘linear’ and ‘branched’ hydroformylation, respectively (Scheme 2). The hydroaminomethylation of quinazolinone 1 with arylhydrazine derivatives gave the expected mixture of [(arylhydrazinyl)alkyl]quinazolinones 5 and 6 , besides a small amount of 2 and 3 (Scheme 3). The tandem hydroformylation/reductive amination reaction of 1 with different amines gave the quinazolinone derivatives 7 – 10 . Compound 10 was used to prepare the chalcones 11a and 11b and pyrazoloquinazolinones 12a and 12b (Scheme 4).     

DFT computational study of the mechanism of allyl halides carbonylation catalyzed by nickel tetracarbonyl

A theoretical investigation at the DFT(B3LYP) level on the carbonylation reaction of allyl bromide catalyzed by nickel tetra-carbonyl Ni(CO)(4) is discussed. The computational results show the following: (i) Three main steps characterize the catalytic cycle: (a) an oxidative addition step, (b) a carbonylation step, and (c) a reductive elimination step where the acyl product is obtained and the catalyst is regenerated. (ii) Both Ni(CO)(3) and Ni(CO)(4) complexes can behave as "active" catalytic species. (iii) The oxidative addition leads to the formation of either eta(3) or eta(1)-allyl nickel complexes, which are involved in a fast equilibrium. (iv) The carbonylation occurs much more easily on the eta(1) than on the eta(3) intermediates.     

Polymerization of conjugated 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine with rhodium and palladium complexes

The monomer 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine was satisfactory obtained through the heterocoupling reaction of 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine and 4‐(5‐iodo‐1‐naphthyl)‐2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system, followed by acetone elimination. Poly{5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine} was obtained through the reaction of the acetylene monomer with homogeneous rhodium and palladium catalyst complexes. The structure of the polymers always showed a trans–cisoidal chain configuration on the basis of IR and NMR spectra. Moreover, only for the rhodium catalyst complex in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The mass determination of the polymers, by osmometry and gel permeation chromatography techniques, showed low average molecular weights. The kinetics of the catalyzed polymerization were analyzed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2038–2047, 2007     

Cis‐1‐phosphabicyclo[3.3.0]octan

A new approach to 1‐phosphabicyclo[3.3.0]octane compounds starts from the reaction of 4‐chloro‐hepta‐1.6‐diene with Mg in THF. No Grignard rearrangement is observed. The Grignard reagent is converted into 1‐allyl‐3‐butenylphosphonous dichloride followed by reduction with LiAlH₄. Cis‐1‐phosphabicyclo[3.3.0]octane has been prepared by radical‐initiated cyclization of 1‐allyl‐3‐butenylphosphane. The bicyclic phosphane is characterized by analytical data as well as ³¹P and ¹³C NMR measurements and the reactionswith NO, S₈, KSeCN, CH₃I, Ni(CO)₄ and HSO₃F, respectively.     

Efficient Synthesis of Oxazolidin‐2‐one via (Chitosan‐Schiff Base)cobalt(II)‐Catalyzed Oxidative Carbonylation of 2‐Aminoalkan‐1‐ols

The (chitosan‐Schiff base)cobalt(II) complex was found to be an efficient catalyst for the oxidative carbonylation (CO/O₂) of 2‐aminoalkan‐1‐ols 1 to give oxazolidin‐2‐ones 2 , in the presence of NaI. The effects of promoters, temperature, solvents, and other reaction conditions were investigated in this study.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Synthesis,structural analysis,and visualization of poly(2‐ethynyl‐9‐substituted carbazole)s and poly(3‐ethynyl‐9‐substituted carbazole)s containing chiral and achiral minidendritic substituents

The synthesis of 2‐ethynyl‐9‐substituted carbazole and 3‐ethynyl‐9‐substituted carbazole monomers containing first‐generation chiral and achiral dendritic (i.e., minidendritic) substituents, 2‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (2ECz), 3‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (3ECz), 2‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (2ECz*), and 3‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (3ECz*), is presented. All monomers were polymerized and copolymerized by stereospecific polymerization to produce cis‐transoidal soluble stereoisomers. A structural analysis of poly(2ECz), poly(2ECz*), poly(3ECz), poly(3ECz*), poly(2ECz*‐co‐2ECz), and poly(3ECz*‐co‐3ECz) by a combination of techniques, including ¹H NMR, ultraviolet–visible, and circular dichroism spectroscopy, thermal optical polarized microscopy, and X‐ray diffraction experiments, demonstrated that these polymers had a helical conformation that produced cylindrical macromolecules exhibiting chiral and achiral nematic phases. Individual chains of these cylindrical macromolecules were visualized by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3509–3533, 2002     

Radical Mediated Aza‐Pauson‐Khand Reaction of Acetylenes,Imines, and CO Leading to Five‐Membered Unsaturated Lactams

Formal [2+2+1] cycloaddition reaction involving acetylenes, aromatic imines, and CO was achieved by radical chain reaction, which gave five‐membered unsaturated lactams in modest to good yields. When we used 5‐chloropentyne, sequential carbonylation took place accompanied with double annulation events to give a cyclohexanone‐fused lactam in excellent stereoselectivity.     

Synthetic Design of Carbonyl‐Group‐Containing Compounds Based on C−O Bond Cleavage Promoted by Pd Complexes

On the basis of fundamental studies on elementary processes involving allyl−O and acyl−O bond cleavages, various new catalytic processes to convert carboxylic acid derivatives have been realized. The new processes include 1) carbonylation of allyl formates to β,γ‐unsaturated acids, 2) amination, alkylation, and carbonylation of allylic alcohols, 3) aldehyde synthesis by hydrogenation of carboxylic anhydrides and carboxylic acids, 4) ketone synthesis by combination of the C−O bond cleavage with transmetallation by organoboronic acids. The processes described here have advantages over the conventional ones in that they are more atom‐efficient and halogen‐free in realizing the syntheses of a variety of carbonyl‐containing compounds under mild conditions.     

Total Synthesis of (±)‐Aspidophylline A

A total synthesis of aspidophylline A, a pentacyclic akuammiline‐type monoterpene indole alkaloid, is described. The synthesis features: 1) rapid access to a fully functionalized dihydrocarbazole through the desymmetrization of readily available 2‐allyl‐2‐(o‐nitrophenyl)cyclohexane‐1,3‐dione; 2) an intramolecular azidoalkoxylation of an enecarbamate to install both the furoindoline ring and the azido functionality; and 3) an intramolecular Michael addition for the construction of the 2‐azabicyclo[3.3.1]nonane ring system.     

Palladium‐Catalyzed Dearomative Cyclocarbonylation by CN Bond Activation

A fundamentally novel approach to bioactive quinolizinones is based on the palladium‐catalyzed intramolecular cyclocarbonylation of allylamines. [Pd(Xantphos)I₂], which features a very large bite angle, has been found to facilitate the rapid carbonylation of azaarene‐substituted allylamines into bioactive quinolizinones in good to excellent yields. This transformation represents the first dearomative carbonylation and is proposed to proceed by palladium‐catalyzed C? N bond activation, dearomatization, CO insertion, and a Heck reaction.     

A Convenient Palladium‐Catalyzed Carbonylative Synthesis of Benzofuran‐2(3 H)‐ones with Formic Acid as the CO Source

A general and convenient palladium‐catalyzed carbonylation procedure for the synthesis of benzofuran‐2(3 H)‐ones from phenols and aldehydes has been developed. With formic acid as the CO source, a variety of benzofuran‐2(3 H)‐ones were obtained in moderate to good yields.     

A Convenient Palladium‐Catalyzed Reductive Carbonylation of Aryl Iodides with Dual Role of Formic Acid

Palladium‐catalyzed reductive carbonylation of aryl halides represents a straightforward pathway for the synthesis of aromatic aldehydes. The known reductive carbonylation procedures either require CO gas or complexed compounds as CO sources. In this communication, we developed a palladium‐catalyzed reductive carbonylation of aryl iodides with formic acid as the formyl source. As a convenient, practical, and environmental friendly methodology, no additional silane or H₂ was required. A variety of aromatic aldehydes were isolated in moderate to excellent yields under mild reaction conditions. Notably, this is the first procedure on using formic acid as the formyl source.     

Palladium‐Catalyzed Enantioselective Heck Carbonylation with a Monodentate Phosphoramidite Ligand: Asymmetric Synthesis of (+)‐Physostigmine, (+)‐Physovenine,and (+)‐Folicanthine

Reported herein is the development of the first enantioselective monodentate ligand assisted Pd‐catalyzed domino Heck carbonylation reaction with CO. The highly enantioselective domino Heck carbonylation of N‐aryl acrylamides and various nucleophiles, including arylboronic acids, anilines, and alcohols, in the presence of CO was achieved. A novel monodentate phosphoramidite ligand, Xida‐Phos, has been developed for this reaction and it displays excellent reactivity and enantioselectivity. The reaction employs readily available starting materials, tolerates a wide range of functional groups, and provides straightforward access to a diverse array of enantioenriched oxindoles having β‐carbonyl‐substituted all‐carbon quaternary stereocenters, thus providing a facile and complementary method for the asymmetric synthesis of bioactive hexahydropyrroloindole and its dimeric alkaloids.     

A Convenient Palladium-Catalyzed Carbonylative Synthesis of (E)-3-Benzylidenechroman-4-ones

A convenient palladium-catalyzed carbonylation reaction for the efficient synthesis of (E)-3-benzylidenechroman-4-ones has been developed. Using TFBen as a solid CO source, a range of substituted (E)-3-benzylidenechroman-4-ones were prepared in moderate to good yields with 2-iodophenols and allyl chlorides as the substrates. Additionally, substituted quinolin-4(1H)-ones can also be obtained with 2-iodoaniline as the starting material.     

Heterobi‐ and ‐trinuclear Complexes with an Amino(ethynyl)carbene as Bridging Ligand

The sequential reaction of the amino(trimethylsilyl)carbene complex [(CO)₅W=C(NH₂)C≡CSiMe₃] ( 1 ) with nBuLi and [I‐Fe(CO)₂Cp] affords the C(carbene)‐N bridged heterobinuclear complex [(CO)₅W=C{NHFe(CO)₂Cp}C≡CSiMe₃] ( 2 ). Desilylation of 1 is achieved by treatment with KF in THF/MeOH. From the reaction of the resulting complex [(CO)₅W=C(NH₂)C≡CH] ( 3 ) with nBuLi and [I‐Fe(CO)₂Cp] two binuclear WFe compounds in a ratio of approximately 1:1 are obtained: the C(carbene)‐C≡C bridged complex 4 and the C(carbene)‐N bridged complex 5 . Repetition of the deprotonation/metallation sequence yields the trinuclear WFe₂ complex 6 . One Fe(CO)₂Cp fragment in 6 is bonded to the amino group and the other one to the terminal carbon atom of the ethynyl substituent. The analogous reaction of 3 with nBuLi and [Br‐Ni(PMe₂Ph)₂Mes] gives a ca. 1:1 mixture of two heterobinuclear complexes ( 7 and 8 ). Complex 7 is bridged by the C(carbene)‐C≡C and complex 8 by the C(carbene)‐N fragment. Subsequent reaction of 7 with BuLi and [Br‐Ni(PMe₂Ph)₂Mes] finally affords the trinuclear WNi₂ complex 9 related to 6 . The solid‐state structure of 2 is established by an X‐ray diffraction analysis. The spectroscopic data of the bi‐ and trinuclear complexes indicate electronic communication between the metal centers through the bridging group.     

Mo (CO)6‐assisted Pd‐supported magnetic graphene oxide‐catalyzed carbonylation‐cyclization as an efficient way for the synthesis of 4(3H)‐quinazolinones

In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)₆. The Mo (CO)₆ is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.     

A Convenient Method to Synthesize 1,3‐Selenazolidin‐2‐ones from 2‐Chloroethyl Amine Salts by Se/CO System under Atmospheric Pressure and Temperature

1,3‐Selenazolidin‐2‐ones were successfully synthesized by the reaction of 2‐chloroethyl amine salts with the Se/CO system via selenation and carbonylation in the presence of NaOH under atmospheric pressure and temperature, and were characterized by gas chromatography–mass spectrometry and nuclear magnetic resonance.     

First‐Row Transition‐Metal–Diborane and –Borylene Complexes

A combined experimental and quantum chemical study of Group 7 borane, trimetallic triply bridged borylene and boride complexes has been undertaken. Treatment of [{Cp*CoCl}₂] (Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) with LiBH₄ ? thf at ?78 °C, followed by room‐temperature reaction with three equivalents of [Mn₂(CO)₁₀] yielded a manganese hexahydridodiborate compound [{(OC)₄Mn}(η⁶‐B₂H₆){Mn(CO)₃}₂(μ‐H)] ( 1 ) and a triply bridged borylene complex [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂MnH(CO)₃] ( 2 ). In a similar fashion, [Re₂(CO)₁₀] generated [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂ReH(CO)₃] ( 3 ) and [(μ₃‐BH)(Cp*Co)₂(μ‐CO)₂(μ‐H)Co(CO)₃] ( 4 ) in modest yields. In contrast, [Ru₃(CO)₁₂] under similar reaction conditions yielded a heterometallic semi‐interstitial boride cluster [(Cp*Co)(μ‐H)₃Ru₃(CO)₉B] ( 5 ). The solid‐state X‐ray structure of compound 1 shows a significantly shorter boron–boron bond length. The detailed spectroscopic data of 1 and the unusual structural and bonding features have been described. All the complexes have been characterized by using ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry, and X‐ray diffraction analysis. The DFT computations were used to shed light on the bonding and electronic structures of these new compounds. The study reveals a dominant B?H?Mn, a weak B?B?Mn interaction, and an enhanced B?B bonding in 1 .     

L‐arabinitol‐based functional polyurethanes

Three new polymerizable diols, based on mono‐, di‐, and tri‐O‐allyl‐L ‐arabinitol derivatives, were prepared from L ‐arabinitol as versatile materials for the preparation of tailor‐made polyurethanes with varied degrees of functionalization. Their allyl functional groups can take part in thiol‐ene reactions, to obtain greatly diverse materials. This “click” reaction with 2‐mercaptoethanol was firstly studied on the highly hindered sugar precursor 2,3,4‐tri‐O‐allyl‐1,5‐di‐O‐trityl‐L ‐arabinitol, to apply it later to macromolecules. A polyurethane with multiple pendant allyl groups was synthesized by polyaddition reaction of 2,3,4‐tri‐O‐allyl‐L ‐arabinitol with 1,6‐hexamethylene diisocyanate, and then functionalized by thiol‐ene reaction. The coupling reaction took place in every allyl group, as confirmed by standard techniques. The thermal stability of the novel polyurethanes was investigated by thermogravimetric analysis and differential scanning calorimetry (DSC). This strategy provides a simple and versatile platform for the design of new materials whose functionality can be easily modified. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011