聚乙烯醇缩酮化度的定量表征

本文在不同条件下制备出聚乙烯醇（ＰＶＡ）与丙酮的缩酮化产物ＰＶＫＴ。进一步利用核磁共振（＾１Ｈ－ＮＭＲ，＾１３Ｃ－ＮＭＲ）、红外光谱（ＩＲ）、紫外光谱（ＵＶ）三种测试手段建立了表征缩酮化度的方法，从不同角度分析了上述方法在表征缩酮化度的准确性。     

乙酸乙烯酯聚合中分子量的控制

乙酸乙烯酯聚合中分子量的控制田炳寿程正贾向群（武汉大学化学系，武汉４３００７２关键词乙酸乙烯酯的聚合聚合度的控制中图分类号Ｏ６３２．３３聚乙酸乙烯酯（ＰＶＡｃ）除直接应用之外，主要用于水解制聚乙烯醇（ＰＶＡ），早期ＰＶＡ又主要用来生产维尼纶。我国从６...     

聚乙烯醇非均相法环氧乙烷衍生化反应的研究

采用聚乙烯醇与环氧乙烷非均相加合反应合成了不同环氧乙烷结合量的羟乙基化聚乙烯醇（ＨＥＰＶＡ）．在通过１３Ｃ－ＮＭＲ和ＩＲ对产物进行表征的基础上，讨论了反应与ＰＶＡ空间立构性及结晶性间的关系，证明了ＨＥＰＶＡ中聚氧乙烯链的存在，且其含量增长速率随反应深度的增加而增大．     

聚乙烯醇非均相法环氧乙烷衍生化反应的研究

 采用聚乙烯醇与环氧乙烷非均相加合反应合成了不同环氧乙烷结合量的羟乙基化聚乙烯醇（ＨＥＰＶＡ）．在通过１３Ｃ－ＮＭＲ和ＩＲ对产物进行表征的基础上，讨论了反应与ＰＶＡ空间立构性及结晶性间的关系，证明了ＨＥＰＶＡ中聚氧乙烯链的存在，且其含量增长速率随反应深度的增加而增大．     

聚乙烯醇－g－聚丙烯酸膜用于渗透气化法分离乙醇－水的研究

合成了聚乙烯醇－ｇ－聚丙烯酸接枝聚合物（ＰＶＡ－ｇ－ＰＡＡ），分别用ＫＯＨ、ＮａＯＨ、ＬｉＣｌ的乙醇－水溶液处理ＰＶＡ－ｇ－ＰＡＡ膜。发现离子膜用于乙醇－水的渗透气化分离可以大幅度提高分离系数，特别是用ＫＯＨ处理，分离系数可达４００。     

聚苯胺水基胶体分散液及其复合物的研究 Ⅰ制备、表征及复合物的表观形貌、力学性能

以聚乙烯醇（ＰＶＡ）为稳定剂（ｓｔｅｒｉｃｓｔａｂｉｌｉｚｅｒ）利用分散聚合（ｄｉｓｐｅｒｓｉｏｎｐｏｌｙｍｅｒｉ ｚａｔｉｏｎ）的原理，成功地制备出了稳定的聚苯胺（ＰＡｎ）水基胶体分散液．聚苯胺颗粒的大小受聚合条件如稳定剂浓度、单体浓度、温度以及搅伴状态等的影响．ＰＶＡ通过物理作用吸附在ＰＡｎ颗粒的表面，起到阻止ＰＡｎ颗粒进一步团聚的作用．但这种作用力较弱．ＰＡｎ颗粒的原始尺寸大小约为２０ｎｍ．由此原始颗粒组成了尺寸在１００ｍｍ～２００ｍｍ左右的稳定颗粒     

锇钼酸－丁基罗丹明B缔合显色反应的研究

本文研究在聚乙烯醇（ＰＶＡ）存在下，锇与钼酸盐和丁基罗丹明Ｂ（ＢＲＢ）的离子缔合显色反应。本法已用于岩矿和催化剂中锇的测定，结果满意。     

高速搅拌对淀粉/聚乙烯醇共混物溶液成膜性能的影响

淀粉与聚乙烯醇（ＰＶＡ）溶液在高速搅拌下共混,可大大改善淀粉／ＰＶＡ共混薄膜的力学性能、透明性与耐水性,对其生物降解性有明显的影响．淀粉／ＰＶＡ共混体系在高速搅拌前后的光谱分析、显微观察、分子量及流变性能的测定表明,这些变化起因于高速搅拌增加了淀粉中直链淀粉的含量,同时提高了淀粉与ＰＶＡ共混溶液的稳定性,改善了淀粉／ＰＶＡ共混物薄膜的使用性能．     

聚丙烯腈原液膜的制备和性能

以溶液聚合的聚丙烯腈原液为铸模液，研究了溶液铸腊法工艺参数：铸膜液温度、凝胶水温度、铸膜液浓度等对膜性能的影响。结果表明，不存在蒸发时间的影响以及不调整原液的组分和浓度是聚俩烯腈原液于其它膜制作技术的显著特点。调节有关制膜工艺参数即可获得特定用途的超滤分离膜。在具有三层结构、平均孔径为５ｎｍ的聚丙烯腈原液干膜上复合了聚乙烯醇（ＰＶＡ）的ＰＶＡ／ＰＡＮ复合膜，分离醇水溶液的渗透汽化（ＰＶ）性能优良。     

聚乙烯醇胺肟螯合纤维吸附钯的研究

用动态法研究了聚乙烯醇胺肟（ＰＶＡＡＯ）螯合纤维对钯的吸附。讨论了影响吸附率和回收率的因素，确定了最隹吸附条件。用５％硫脲＋０．５０ｍｏｌ／Ｌ硝酸溶液可以解吸。ＰＶＡＡＯ螯合纤维对钯的饱和吸附容量为４５１．９ｍｇ／ｇ干纤维。     

环氧-丙烯酸酯混杂光固化体系的研究

研究环氧－丙烯酸酯混杂光固化体系中引发剂的协同作用，证实混杂光固化过程中自由基引发剂对阳离子引发剂二苯基碘Weng盐的增感作用，混杂光固化膜具有优良的机械性能，其抗冲击性能，抗弯曲性能及硬度优于单纯的阳离子体系固化膜，与自由基体系固化膜性能接近。混杂光固化膜的玻璃化转变温度高于自由基体系固化膜；它的耐溶剂性能优异，耐丙酮擦拭次数比自由基固化膜高25倍以上，比阳离子固化膜高3．5倍。这可能是由于混杂光固化过程中形成的IPN结构造成的，动态粘弹谱和扫描电镜的实验结果证实了这一结论。     

钒酸铋颜料制备实验的改进——pH优化

使用改进的实验装置研究钒酸铋颜料制备实验中p H对产物的影响。X射线衍射分析结果表明,在选定实验条件下,产物为四方相为主的四方、单斜两相混合物。p H对钒酸铋颜色有重要影响。酸性条件下颜色偏深,为土黄色;碱性条件下为亮黄色,且p H越大,颜色越淡。推荐反应p H为9,此时产物颜色呈色调较好的亮黄色。     

Colorimetric method for the quantitative determination of the antibilharzial drug praziquantel and its application to pharmaceutical preparations.

A method for the colorimetric assay of praziquantel has been developed. For the colorimetric assay, it was necessary to hydrolyse praziquantel with 3 mol dm-3 NaOH, 6 mol dm-3 HCl and 85% phosphoric acid separately. 4-Chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) reacts with the basic hydrolysis product in methanolic aqueous phosphate buffer (pH 7.4), resulting in the formation of an orange product with a characteristic absorption maximum at 478 nm. The red-orange product of the interaction between the hydrochloric acid hydrolysis product and NBD-Cl showed an absorption maximum at 486 nm. The colours obtained were stable for 24 h. The colour system obeyed Beer's law in the concentration range 2-15 and 2-18 micrograms ml-1 for the basic hydrolysis product and the acid hydrolysis product, respectively. The results obtained showed good recoveries with relative standard deviations of 0.378 and 0.47% for the basic and the acid hydrolysis product, respectively. The determination limit was found to be 0.124 and 0.150 micrograms ml-1 for the praziquantel basic hydrolysis product and the acid hydrolysis product, respectively. The coloured reaction products obtained with the proposed method were synthesized. The structures of these products were studied and the compounds identified.     

酰基过氧化物的化学 VII: 过氧化环丙基甲酰与硝基烷烃阴离子的单电子转移反应

过氧化环丙基甲酰(CPP)能将硝基仲烷烃阴离子氧化成相应的酮. 产物分析和ESR研究揭示该反应经过由硝基烷烃阴离子向CPP的单电子转移引发步骤及随后的一系列自由基反应步骤, 生DN 主要产物酮和典型的自由基副产物, 如双环丙基、硝基烷基二聚体和能被ESR直接检测的双环丙基氮氧自由基等.     

Numerical study of the kinetics of unimolecular heterogeneous reactions onto planar surfaces

In this paper we investigate two-dimensional in space mathematical models of the kinetics of unimolecular heterogeneous reactions proceeding onto planar surfaces. The models are based on Langmuir-type kinetics of the adsorption, desorption, and reaction including the surface diffusion of the adsorbate, surface diffusion of the product before its desorption, and slow desorption of the product from the adsorbent. It is also assumed that the reactant diffuses towards an adsorbent from a bounded vessel and the product diffuses from the adsorbent into the same vessel. Diffusivity of all species and kinetic coefficients are constants. The numerical simulation was carried out using the finite difference technique for four models: one model neglects the surface diffusion of the adsorbate and product, the second one includes the surface diffusion of the adsorbate and product, the third of them includes the surface diffusion of the adsorbate and neglects diffusion of the product along the surface, and the last one neglects the surface diffusion of the adsorbate and includes diffusion of the product along the adsorbent. By changing input parameters effects of the surface diffusion of the adsorbate and product and the slow desorption of the product are studied numerically.     

Approximate Mathematical Model of Heat Exchange in a Complex Thermal Engineering System of Several Product Pipelines Carrying a Motionless Isothermal Product within a Single Insulating Jacket

An approximate mathematical model was developed to describe the heat exchange in a complex thermal engineering system of several parallel product pipelines carrying an motionless isothermal product within a single insulating jacket. The model is distinguished by using a simplified mathematical model of the steady-state heat conduction on a circle (motionless product) and in an annulus (product pipeline wall) under the Robin boundary conditions using various “approximating” effective heat-transfer coefficients in different parts of the boundary of a heated product pipeline carrying the isothermal product with the air space and the insulation.     

离子热法合成沸石咪唑骨架材料及其溶解-结晶机理研究

基于沸石咪唑骨架材料在离子液体和低共熔溶剂中冷却结晶的析出方式,开发了一种离子热法合成沸石咪唑骨架材料的新途径,采用X射线衍射、扫描电镜、核磁共振光谱、红外光谱以及热重分析等方法对制备的产物进行了表征,研究了合成条件对产物结晶度、尺寸和形貌的影响,探讨了沸石咪唑骨架材料在离子热合成体系中的溶解-结晶析出机理.研究发现,冷却速率能够影响产物形貌,急速冷却时,sod(RCSR代码)型产物的形貌为球形,zni(RCSR代码)型产物为棒状或平板状;程序控制冷却时,sod型产物的形貌为多面体,zni型产物呈团簇状.     

Correlation of product ion profiles with molecular structures of androgenic and anabolic steroids in ESI MS/MS

Androgenic and anabolic steroids (AASs) are a class of chemical substances closely related to testosterone in molecular structure. They can be abused to enhance performances in human and equine athletes, and are banned by the sports authorities. To assist with method development for doping analyses of AASs, investigations were conducted to correlate their product ion profiles with the molecular structures. Although very similar in chemical structure, AASs generated noticeably different product ion profiles from collision‐induced dissociation (CID). On the basis of both outlines of the product ion profiles and molecular structures, AASs studied were classified into six subclasses. In each subclass, the product ion profiles were identical or similar. However, the product ion profiles in one subclass were remarkably different from those in another. The classification reveals that the position and number of double bond(s) in conjugation with the 3‐carbonyl group in the molecular structure of an AAS have significant effects on product ion profile. The presence or absence of the 19‐methyl group in an AAS also has a remarkable influence on its product ion profile. A substitution in the A‐, B‐ or D‐ring of an AAS may cause a shift in mass value of the product ions. The correlation of product ion profiles with molecular structures of AASs has the implication that each AAS can be characterized by a combination of its [M + H]⁺ ion and product ion profile and as a result be identified with specificity. The classified product ion pattern may be useful in the identification of unknown AASs. Copyright © 2010 John Wiley & Sons, Ltd.     

Ca+RBr→CaBr+R(R=CH3,C2H5,n-C3H7)反应的矢量相关和产物的转动取向

The quasiclassical trajectory method is used to study the vector correlations of the reactions Ca+RBr (R=CH3, C2H5 and n-C3H7Br) and the rotational alignment of product CaBr. The product rotational alignment parameters at di?erent collision energies and the vector correlations between the reagent and product are numerically calculated. The vector correlations are described by using the angle distribution functions P(θr),P(φr), P(θr, φr) and the polarization-dependent differential cross sections (PDDCSs). The peak values of P(θr) of the product CaBr from Ca+CH3Br are larger than those from Ca+C2H5Br and Ca+n-C3H7Br. The peak of P(θr) atφr = 3π/2 is apparently stronger than that at φr= π/2 for the three reactions Ca+RBr. The calculation results show that the rotational angular momentum of the product CaBr is not only aligned, but also oriented along the direction which is perpendicular to the scattering plane.The product CaBr molecules are strongly scattered forward. The orientation and alignment of the product angular momentum will affect the scattering direction of the product molecules to varying degrees.     

双单体固相共聚改性聚丙烯技术及其机理研究

在马来酸酐(MAH)固相接枝改性聚丙烯(PP)的过程中加入合适比例的异氰脲酸三烯丙酯(TAIC)作为共聚单体,可以大大提高MAH在PP上的接枝率,同时可以有效抑制在普通固相接枝过程中PP的严重降解,得到了性能较好的高极性PP.与普通固相接枝法与熔体接枝法对比,双单体固相共聚接枝改性PP是一种得到高极性PP的有效方法.本文同时对双单体在固相接枝反应中的作用机理进行了探讨.