Thermal decomposition studies of the polyhedral oligomeric silsesquioxane, POSSh, and when it is impregnated with the metallocene bis(eta5-cyclopentadienyl)zirconium (IV) dichloride or immobilized on silica

Thermal decomposition studies of the free polyhedral oligomeric silsesquioxane, POSS(h), and when this compound has been impregnated with Cp(2)ZrCl(2) (Cp=eta(5)-C(5)H(5)) or immobilized on SiO(2) were conducted using infrared emission spectroscopy (IES) over a 100-1000 degrees C temperature range and by thermogravimetric analysis (TGA). The organic groups in POSS(h) apparently decompose thermally into Si-CH(3), Si-H and other fragments. Upon impregnation with Cp(2)ZrCl(2), however, a different thermal decomposition pathway was followed and new infrared emission bands appeared in the 1000-900cm(-1) region suggesting the formation of Si-O-Zr moieties. When immobilized on SiO(2) and subjected to thermal decomposition, the POSS(h) compound lost its organic groups and the inorganic structure remaining was incorporated into the SiO(2) framework.     

A new synthetic entry to phosphinophosphinidene complexes. Synthesis and structural characterisation of the first side-on bonded and the first terminally bonded phosphinophosphinidene zirconium complexes [mu-(1,2:2-eta-tBu2P=P)[Zr(Cl)Cp2]2] and [[Zr(PPhMe2)Cp2](eta1)-P-PtBu2)

The reactions of lithiated diphosphanes with transition metal chlorides constitute a new general entry to phosphinophosphinidene complexes: the reaction of Cp2ZrCl2(Cp = C5H5) with tBu2P-P(SiMe3)Li (molar ratio approximately 1:1) yields [mu-(1,2:2-eta-tBu2P=P)[Zr(Cl)Cp2]2]; the reaction of Cp2ZrCl2 with tBu2P-P(SiMe3)Li (molar ratio approximately 1:2) and an excess of PPhMe2 in DME yields the first terminally bonded phosphinophosphinidene complex, [[Zr(PPhMe2)Cp2](eta1-P-PtBu2)].     

Cp2ZrCl2/异丁基铝氧烷催化乙烯聚合动力学

均相茂金属催化烯烃聚合体系大多采用甲基铝氧烷(MAO)为助催化剂,但对MAO的作用机理尚不清楚。据文献报道,乙基铝氧烷(EAO)和异丁基铝氧烷(BAO)也有类似的助催化作用,但聚合活性远低于MAO体系。     

Novel micro3-oxo complexes prepared from Cp*Zr(B(3R)3 (R = H, CH3) and B(C6F5)3 in diethyl ether

From the reactions of Cp*ZrCl(3) with 3 equiv. of LiBH(3)R (R = CH(3), Ph), the organotrihydroborate complexes, Cp*Zr(BH(3)CH(3))(3), 1, and Cp*Zr(BH(3)Ph)(3), 2, were isolated. One of the Zr-H-B bonding interactions in 2 could be described as an intermediate case between the bidentate and tridentate modes. Reactions of and Cp*Zr(BH(4))(3), 3, with Lewis acid B(C(6)F(5))(3) in diethyl ether produced the novel 14-electron ionic compounds [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BCH(3))}][HB(C(6)F(5))(3)], 4, and [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BOC(2)H(5))}][HB(C(6)F(5))(3)], 5, respectively. These two unique compounds resulted from a sequential cleavage of Zr-H-B bonds of 1 and 3 and C-O bonds of ether followed by the formation of O-B bonds. The solid state single crystal X-ray analyses revealed that both compounds have similar structures. A micro(3)-oxygen bridges two zirconiums and a boron atom. The latter three atoms are further connected by three micro(2)-bridging ethoxy groups giving rise to three four-membered metallacycles within the structure of each cation.     

双(环戊二烯基)二氯化锆催化合成乙烯-笼型倍半硅氧烷杂化共聚物及其结构表征

通过双(环戊二烯基)二氯化锆(Cp₂ZrCl₂)催化剂和改良的甲基铝氧烷(MMAO)助催化剂, 合成了无机-有机杂化共聚物. 研究了2种具有不同单乙烯基反应基团的笼型倍半硅氧烷(POSS)与乙烯的聚合. 对共聚产物的结构、 热力学性质、 分子量及其分布等进行了研究. 共聚单体(POSS)的插入率在0.01%~0.30%之间, 随着共聚单体在共聚物中摩尔分数的增大, 聚合物的熔点和熔解热降低. 共聚物的热重分析结果显示, 乙烯-POSS共聚物拥有更高的热分解温度以及较高的热分解残留量. 随着POSS的加入, 聚合物的分子量明显提高, 聚合物的分子量分布变宽.     

Ansa-茂锆催化剂对乙烯/1-辛烯共聚合研究

乙烯与α 烯烃共聚合可制得线性低密度聚乙烯等重要塑料产品．用茂金属催化剂与甲基铝氧烷（ＭＡＯ）助催化剂合成的乙烯／α 烯烃共聚物具有共单体分布均匀，分子量分布窄等特点，其性能比传统的Ｚｉｅｇｌｅｒ Ｎａｔａ催化剂体系所得共聚物优越．茂金属化合物的结构...     

Epoxy networks modified by multifunctional polyhedral oligomeric silsesquioxanes (POSS) containing amine groups

The hydrolytic condensation of a precursor synthesized by the reaction of equimolar amounts of (3-aminopropyl)triethoxysilane and phenylglycidylether led to a distribution of polyhedral oligomeric silsesquioxanes (POSS) containing 8–11 Si atoms, functionalized with amine groups. About 57% of the NH functionalities were active for reaction with epoxy groups. The multifunctional amine-POSS was used to modify an epoxy network obtained by the homopolymerization of diglycidylether of bisphenol A initiated by benzyldimethylamine. The main effect of POSS modification was an increase in both the glassy and rubbery modulus explained, respectively, by the increase in cohesive energy and crosslink densities.     

双组分茂金属催化剂催化乙烯聚合的研究

选择能形成支链的不对称桥联茂金属化合物Me2 C[(Cp) (Ind) ]ZrCl2 和非桥联的不同结构的茂金属化合物二氯二 (烯基取代环戊二烯 )锆如 ( Cp) 2 ZrCl2 ,(Cp) 2 ZrCl2 和 (Cp) 2 ZrCl2 ,以MAO为助催化剂 ,分别组成三组双组分茂金属催化剂的催化体系 ,催化乙烯聚合 .结果表明 ,两类催化剂组成的双组分茂金属催化体系催化乙烯聚合能得到支化的宽分子量分布的聚乙烯 ;聚合温度和改变两种茂金属催化剂的摩尔比对催化活性和分子量有很大影响 .因此可以利用改变双组分茂金属催化剂的摩尔比例和聚合温度来调控聚合物的分子量和分子量分布 .改变两种茂金属催化剂的摩尔比和聚合温度也能使聚合物的结晶度发生改变     

Ab initio molecular orbital study of the insertion of H2 into POSS compounds

The insertion of one and two H₂ molecules into polyhedral oligomeric silsesquioxanes (POSS) was investigated as a function of the size of the cage, using both Hartree-Fock (HF) and second order perturbation theory (MP2) methods. Also investigated was the same reaction into the heavier groups 4 and 14 metal-substituted POSS (metallasilsesquioxanes) such as Ge-POSS, Si/Ge-mixed POSS, and Ti- and Zr-POSS. The properties of these species in comparison with those of POSS are discussed.     

Copolymerization of ethylene with cyclohexene (CHE) catalyzed by nonbridged half-titanocenes containing aryloxo ligand: notable effect of both cyclopentadienyl and anionic donor ligand for efficient CHE incorporation

Cyclohexene (CHE) has been incorporated into the polymer chain in ethylene/CHE copolymerization by nonbridged half-titanocenes containing aryloxo ligands of the type, Cp'TiCl2(O-2,6-iPr2C6H3), in the presence of methylaluminoxane (MAO) cocatalyst. The effect of the substituent in the cyclopentadienyl fragment was found to be very important for CHE incorporation; both the tert-BuCp (3) and 1,2,4-Me3Cp analogues (4) showed efficient CHE incorporation, whereas a negligible amount of CHE incorporation was observed by both the indenyl (1) and the Cp* analogue (2) under the same conditions. Cp-ketimide analogue, CpTiCl2(N=CtBu2) (5), zirconocene-like Cp2ZrCl2 (6), and linked half-titanocene-like [Me2Si(C5Me4)(NtBu)]TiCl2 (7) did not show any CHE incorporation under the same conditions; unique characteristics for using this type of catalyst precursor for the present copolymerization have thus been emphasized.     

Bridged polyhedral oligomeric silsesquioxane (POSS): A potential member of silsequioxanes

Two novel and well-defined polyhedral oligomeric silsesquioxanes（POSS） with two same Si₈O₁₂ cores and a reactive NH group, namely bridged-POSS（2a and 2b）,have been prepared by the traditional ’corner-capping’ reaction.X-ray diffraction demonstrates that those two POSS have the similar T₈ structure.From the thermo-gravimetric analysis,bridged-POSS shows the belter thermal degradation stability than the contrastive POSS.     

Cp2ZrCl2-catalyzed synthesis of 2-aminovinyl benzimidazoles under microwave conditions

A microwave-assisted general method for the synthesis of 2-aminovinyl benzimidazoles has been developed.Treatment of the 1,2-phenylenediamines and N-arylated/N,N-dialkylated 3-aminoacroleins with bis(cyclopentadienyl)zirconium(IV) dichloride(Cp2Zr Cl2) as the catalyst under microwave irradiation for 3–5 min followed by in situ Mn O2 oxidation afforded thirteen 2-aminovinyl benzimidazoles in good yields.     

Synthesis, characterization, and catalytic properties of new half-sandwich zirconium(IV) complexes

A number of new half-sandwich zirconium(IV) complexes bearing N,N-dimethylaniline-amido ligands with the general formula Cp*ZrCl(2)[ortho-(RNCH(2))(Me(2)N)C(6)H(4)] [R = 2,6-Me(2)C(6)H(3) (1), 2,6-(i)Pr(2)C(6)H(3) (2), (i)Pr (3), (t)Bu (4)] were synthesized by the reaction of Cp*ZrCl(3) with the corresponding ortho-(Me(2)N)C(6)H(4)CH(2)NRLi. All new zirconium complexes were characterized by (1)H and (13)C NMR, elemental analyses and single crystal X-ray diffraction analysis. The molecular structural analysis reveals that the NMe(2) group does not coordinate to the zirconium atom in all cases. Complexes 1-4 all have a pseudo-tetrahedral coordination environment in their solid state structures and adopt a three-legged piano stool geometry for the zirconium atoms with the amide N atom and the two Cl atoms being the three legs and the Cp* ring being the seat. Variable-temperature (1)H NMR experiments for all complexes 1-4 were performed to investigate the possible intramolecular interaction between the N atom in the NMe(2) group and the central zirconium atom in solution. Upon activation with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), complexes 1-4 all exhibit moderate to good catalytic activity for ethylene polymerization and copolymerization with 1-hexene, producing linear polyethylene or poly(ethylene-co-1-hexene) with moderate molecular weight and reasonable 1-hexene incorporation.     

Naked (C5Me5)2M cations (M = Sc, Ti, and V) and their fluoroarene complexes

The ionic metallocene complexes [Cp*(2)M][BPh(4)] (Cp* = C(5)Me(5)) of the trivalent 3d metals Sc, Ti, and V were synthesized and structurally characterized. For M = Sc, the anion interacts weakly with the metal center through one of the phenyl groups, but for M = Ti and V, the cations are naked. They each contain one strongly distorted Cp* ligand, with one (V) or two (Ti) agostic C-H...M interactions involving the Cp*Me groups. For Sc and Ti, these Lewis acidic species react with fluorobenzene and 1,2-difluorobenzene to yield [Cp*(2)M(kappaF-FC(6)H(5))(n)][BPh(4)] (M = Sc, n = 2; M = Ti, n = 1) and [Cp*(2)M(kappa(2)F-1,2-F(2)C(6)H(4))][BPh(4)], the first examples of kappaF-fluorobenzene and kappa(2)F-1,2-difluorobenzene adducts of transition metals. With the perfluorinated anion [B(C(6)F(5))(4)](-), both Sc and Ti form [Cp*(2)M(kappa(2)F-C(6)F(5))B(C(6)F(5))(3)] contact ion pairs. The nature of the metal-fluoroarene interaction was studied by density functional theory (DFT) calculations and by comparison with the corresponding tetrahydrofuran (THF) adducts and was found to be predominantly electrostatic for all metals studied.     

Insertions‐ und Substitutionsreaktion von Ameisensäuremethylester mit [Cp′2ZrCl(PHTipp)] – Molekülstruktur von meso‐trans‐[Cp′2ZrCl{OCH(PHTipp)2}] (Cp′ = η5‐C5MeH4, Tipp = 2,4,6‐Pri3C6H2)

Insertion and Substitution Reaction of Methyl Formate with [Cp′₂ZrCl(PHTipp)] – Molecular Structure of meso‐trans ‐[Cp′₂ZrCl{OCH(PHTipp)₂}] (Cp′ = η⁵‐C₅MeH₄, Tipp = 2,4,6‐Prⁱ₃C₆H₂) [Cp′₂ZrCl(PHTipp)] ( 1 ) (Cp′ = η⁵‐C₅MeH₄, Tipp = 2,4,6‐Prⁱ₃C₆H₂) reacts with methyl formate with insertion and substitution to give [Cp′₂ZrCl{OCH(PHTipp)₂}] ( 2 ). 2 was characterized spectroscopically (¹H, ³¹P NMR, IR, MS) and by X‐ray structure determination. Only the meso‐trans isomer is present in the solid state.     

MgCl_2负载双金属复合催化剂制备宽分子量分布聚乙烯

聚乙烯的分子量和分子量分布对其熔体的流变性能和产品的力学性能有显著影响．分子量分布的变化,尤其是分子量分布末端部位的变化,都会对材料的注塑行为产生大的影响［１］．为了控制Ｚｉｅｇｌｅｒ催化剂制备的聚乙烯分子量分布而改善聚合工艺的报道很多［２～４］,工业生产中可利用多步聚合工艺来获得宽分子量分布的聚乙烯［５,６］,但这种方法工艺复杂,成本高．美国ＵＣＣ公司利用复合的ＴｉＶ和ＺｒＶ催化剂在气相法Ｕｎｉｐｏｌ工艺装置上首次成功的合成出了双峰高分子量聚乙烯产品［７,８］,由于采用Ｕｎｉｐｏｌ生产工艺…     

A metallocene-complexed dibismuthene: Cp2Zr(BiR)2 (Cp = C5H5; R = C6H3-2,6-Mes2)

The zirconocene-complexed dibismuthene, Cp2Zr(BiR)2 (Cp = C5H5; R = C6H3-2,6-Mes2), was prepared by the reaction of sodium metal with Cp2ZrCl2 and RBiCl2. The air- and moisture-sensitive dark reddish/brown compound is the first organometallic compound containing Bi-Zr bonds and the only example of a ZrBi2 ring. Moreover, our computations on associated model systems offer insight into the nature of the interaction of the heaviest dipnictene with a metallocene center.     

Phenolic resin/polyhedral oligomeric silsesquioxane (POSS) composites: Mechanical,ablative, thermal,and flame retardant properties

Three different polyhedral oligomeric silsesquioxanes (POSS), trisilanolphenyl polyhedral oligomeric silsesquioxane (T‐POSS), octaaminophenyl polyhedral oligomeric silsesquioxanes (OAPS), and octaphenyl polyhedral oligomeric silsesquioxanes (OPS) were incorporated into phenolic resin (PR), respectively; PR/POSS composites were successfully prepared, and the properties of PR/POSS composites were studied. The limiting oxygen index (LOI), cone calorimeter, and thermal gravimetric analysis (TGA) were used for the estimation of flame retardancy and thermal stability. Oxyacetylene flame test and flexural strength test were used to study the ablative and mechanical properties of the PR/POSS composites. The results indicated that T‐POSS was more effective in improving the flame retardancy of PR than OAPS or OPS. Meanwhile, compared with pure PR, the second line ablation rates of PR/4% T‐POSS, PR/4% OAPS, and PR/4% OPS were significantly reduced by 53.3%, 61.9%, and 40.0%, respectively. In addition, the thermal stability and flexural strength of PR/4% T‐POSS were significantly higher than that of all other PR composites.     

Chiral Ansa metallocenes with Cp ring-fused to thiophenes and pyrroles: syntheses, crystal structures, and isotactic polypropylene catalysts.

Syntheses, crystal structures, and polymerization data for new isospecific metallocenes (heterocenes) having cyclopentenyl ligands b-fused to substituted thiophenes (Tp) and pyrroles (Pyr) are reported. The C2- and C1-symmetric heterocenes are dimethylsilyl bridged, have methyl groups adjacent to the bridgehead carbon atoms, and have aryl substituents protruding in the front. rac-Me2Si(2,5-Me2-3-Ph-6-Cp[b]Tp)2ZrCl2/MAO (MAO = methyl alumoxanes) is the most active metallocene catalyst for polypropylene reported to date. rac-Me2Si(2,5-Me2-3-Ph-6-Cp[b]Tp)2ZrCl2 and rac-Me2Si(2,5-Me2-1-Ph-4-Cp[b]Pyr)2ZrCl2 have the same structure, and the former is 6 times more active, produces half the total enantiofacial errors, and is 3.5 times less regiospecific in propylene polymerizations at the same conditions. rac-Me2Si(2-Me-4-Ph-1-Ind)2ZrCl2/MAO is 3.5 times lower in activity than rac-Me2Si(2,5-Me2-3-Ph-6-Cp[b]Tp)2ZrCl2 catalyst, and while the former is the more stereospecific and the less regiospecific, the sum of these two enantioface errors is the same for both species. Fine-tuning the heterocene sterics by changing selected hydrogen atoms on the ligands to methyl groups influenced their catalyst activities, stereospecificites, regiospecificites, and isotactic polypropylene (IPP) Mw. Thus, both substituting a hydrogen atom adjacent to the phenyl ring with a methyl group on an azapentalenyl ligand system and replacing one and then two hydrogens on the phenyl ring with methyls on thiopentalenyl ligands provided increased polymer Tm and Mw with increasing ligand bulk. Polymer molecular weights are sensitive to and inversely proportional to MAO concentration, and the catalyst activities increase when hydrogen is added for molecular weight control. The polymer Tm values with the thiopentalenyls as TIBAL/[Ph3C][B(C6F5)4] systems were higher than with MAO as catalyst activator. A racemic C1, pseudo-meso complex with a hybrid dimethylsilyl-bridged 2-Me-4-Ph-1-Ind/2,5-Me2-4-Ph-1-Cp[b]Pyr ligand produced the first sample of IPP with all the steric pentad intensities fitting the enantiomorphic site control model. Speculative mechanistic considerations are offered regarding electronic effects of the heteroatoms and steric effects of the ligand structures, the preferred phenyl torsion angles, and anion effects.